Enable fastboot support for IPQ9574 based boards
cover Enable fastboot support for IPQ9574 based boards
This series enables MMC based fastboot flashing for IPQ9574 boards. For this the following are added/enabled
* USB2 & USB3 phys support
* USB Gadget support, Fastboot-MMC related configs
* Flashing related documentation
v3: - Rebase to top of tree
- Drop DT changes
- Pick up R-b tags
- Include Linux kernel version information in relevant commits
- Update documentation about 'n/w driver'
v2: https://lore.kernel.org/u-boot/[email protected]/
v2: Resend of https://lore.kernel.org/u-boot/[email protected]/#t
Rebased to latest top of tree
Updated author and Signed-off-by email id from quicinc.com to oss.qualcomm.com
---
Varadarajan Narayanan (5):
clk/qcom: Add USB related clocks for IPQ9574
phy: Add IPQ9574 support to Qualcomm QUSB2 phy
phy: qcom: Add QMP USB PHY driver
configs: ipq9574: Enable fastboot support
doc: board/qualcomm: Update RDP flashing instructions
configs/qcom_ipq9574_mmc_defconfig | 18 +- doc/board/qualcomm/rdp.rst | 16 + drivers/clk/qcom/clock-ipq9574.c | 28 + drivers/phy/qcom/Kconfig | 8 + drivers/phy/qcom/Makefile | 1 + drivers/phy/qcom/phy-qcom-qmp-pcs-misc-v4.h | 17 + drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v5.h | 36 + drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v6.h | 17 + drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v7.h | 17 + drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v8.h | 38 + drivers/phy/qcom/phy-qcom-qmp-pcs-v4_20.h | 15 + drivers/phy/qcom/phy-qcom-qmp-pcs-v5_20.h | 21 + drivers/phy/qcom/phy-qcom-qmp-pcs-v6-n4.h | 32 + drivers/phy/qcom/phy-qcom-qmp-pcs-v6.h | 2 + drivers/phy/qcom/phy-qcom-qmp-pcs-v7.h | 34 + drivers/phy/qcom/phy-qcom-qmp-pcs-v8.h | 32 + drivers/phy/qcom/phy-qcom-qmp-pcs-v8_50.h | 13 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v2.h | 109 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v6.h | 7 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v7.h | 87 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v8.h | 75 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com.h | 231 +- drivers/phy/qcom/phy-qcom-qmp-qserdes-lalb-v8.h | 639 ++++++ drivers/phy/qcom/phy-qcom-qmp-qserdes-ln-shrd-v5.h | 11 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v2.h | 205 ++ drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v4_20.h | 43 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v5_20.h | 86 + .../phy/qcom/phy-qcom-qmp-qserdes-txrx-v5_5nm.h | 328 +++ drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v6.h | 1 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v6_n4.h | 64 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v7.h | 80 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v8.h | 68 + drivers/phy/qcom/phy-qcom-qmp-ufs.c | 136 +- drivers/phy/qcom/phy-qcom-qmp-usb.c | 2198 ++++++++++++++++++++ .../phy/qcom/phy-qcom-qmp-usb43-qserdes-com-v8.h | 224 ++ drivers/phy/qcom/phy-qcom-qmp.h | 142 +- drivers/phy/qcom/phy-qcom-qusb2.c | 356 +++- 37 files changed, 5081 insertions(+), 354 deletions(-)
---
base-commit: baa64b2f892890f00a377eac4a3e685472bb56b5
change-id: 20260805-fastboot-fa492e2d87b8
Best regards,
Signature · 1 line
Varadarajan Narayanan <[email protected]>
PATCH 1/5 clk/qcom: Add USB related clocks for IPQ9574
Add the USB controller and phy related clocks.
--- drivers/clk/qcom/clock-ipq9574.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
drivers/clk/qcom/clock-ipq9574.c +28 -0
@@ -25,6 +25,9 @@#define GCC_SDCC1_AHB_CBCR 0x33034#define GCC_SDCC1_APPS_CMD_RCGR 0x33004#define GCC_SDCC1_ICE_CORE_CBCR 0x33030 +#define GCC_USB0_MASTER_CMD_RCGR 0x2c004 +#define GCC_USB0_MOCK_UTMI_CMD_RCGR 0x2c02c +#define GCC_USB0_AUX_CMD_RCGR 0x2C018static ulong ipq9574_set_rate (struct clk *clk,ulong rate) {
@@ -39,6 +42,17 @@ static ulong ipq9574_set_rate(struct clk *clk, ulong rate)clk_rcg_set_rate_mnd (priv->base,GCC_SDCC1_APPS_CMD_RCGR ,11 ,0 ,0 ,CFG_CLK_SRC_GPLL2 ,16 );return rate; +case GCC_USB0_MASTER_CLK : +clk_rcg_set_rate (priv->base,GCC_USB0_MASTER_CMD_RCGR , +4 ,CFG_CLK_SRC_GPLL0 ); +return rate; +case GCC_USB0_MOCK_UTMI_CLK : +clk_rcg_set_rate_mnd (priv->base,GCC_USB0_MOCK_UTMI_CMD_RCGR , +0 ,0 ,0 ,CFG_CLK_SRC_CXO ,8 ); +return rate; +case GCC_USB0_AUX_CLK : +clk_rcg_set_rate_mnd (priv->base,GCC_USB0_AUX_CMD_RCGR ,0 ,0 ,0 , +CFG_CLK_SRC_CXO ,8 );default :return -EINVAL ; }
@@ -50,6 +64,14 @@ static const struct gate_clk ipq9574_clks[] = {GATE_CLK (GCC_SDCC1_AHB_CLK ,0x33034 ,0x00000001 ),GATE_CLK (GCC_SDCC1_APPS_CLK ,0x3302C ,0x00000001 ),GATE_CLK (GCC_SDCC1_ICE_CORE_CLK ,0x33030 ,0x00000001 ), +GATE_CLK (GCC_SNOC_USB_CLK ,0x2e058 ,0x00000001 ), +GATE_CLK (GCC_USB0_MASTER_CLK ,0x2c044 ,0x00000001 ), +GATE_CLK (GCC_ANOC_USB_AXI_CLK ,0x2e084 ,0x00000001 ), +GATE_CLK (GCC_USB0_SLEEP_CLK ,0x2c058 ,0x00000001 ), +GATE_CLK (GCC_USB0_MOCK_UTMI_CLK ,0x2c04c ,0x00000001 ), +GATE_CLK (GCC_USB0_PHY_CFG_AHB_CLK ,0x2c05c ,0x00000001 ), +GATE_CLK (GCC_USB0_AUX_CLK ,0x2c048 ,0x00000001 ), + GATE_CLK(GCC_USB0_PIPE_CLK, 0x2c054, 0x00000001), };static int ipq9574_enable (struct clk *clk)
@@ -67,6 +89,10 @@ static int ipq9574_enable(struct clk *clk) }static const struct qcom_reset_map ipq9574_gcc_resets[] = { + [GCC_USB_BCR ] = {0x2c000 }, + [GCC_QUSB2_0_PHY_BCR ] = {0x2c068 }, + [GCC_USB0_PHY_BCR ] = {0x2c06c ,0 }, + [GCC_USB3PHY_0_PHY_BCR ] = {0x2c070 ,0 }, [GCC_SDCC_BCR ] = {0x33000 }, };
@@ -75,6 +101,8 @@ static struct msm_clk_data ipq9574_gcc_data = { .num_resets = ARRAY_SIZE(ipq9574_gcc_resets), .enable = ipq9574_enable, .set_rate = ipq9574_set_rate, + .clks = ipq9574_clks, + .num_clks = ARRAY_SIZE(ipq9574_clks), };static const struct udevice_id gcc_ipq9574_of_match[] = {
Signature · 1 line
2.34.1
PATCH 2/5 phy: Add IPQ9574 support to Qualcomm QUSB2 phy
In reply to Varadarajan Narayanan via U-BootImported from Linux (v7.2-rc4) driver.
--- drivers/phy/qcom/phy-qcom-qusb2.c | 356 +++++++++++++++++++++++++++++++------- 1 file changed, 294 insertions(+), 62 deletions(-)
drivers/phy/qcom/phy-qcom-qusb2.c +294 -62
@@ -15,81 +15,81 @@#include <dt-bindings/phy/phy-qcom-qusb2.h> -#define QUSB2PHY_PLL 0x0 -#define QUSB2PHY_PLL_TEST 0x04 -#define CLK_REF_SEL BIT(7) +#define QUSB2PHY_PLL 0x0 +#define QUSB2PHY_PLL_TEST 0x04 +#define CLK_REF_SEL BIT(7) -#define QUSB2PHY_PLL_TUNE 0x08 -#define QUSB2PHY_PLL_USER_CTL1 0x0c -#define QUSB2PHY_PLL_USER_CTL2 0x10 -#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c -#define QUSB2PHY_PLL_PWR_CTRL 0x18 +#define QUSB2PHY_PLL_TUNE 0x08 +#define QUSB2PHY_PLL_USER_CTL1 0x0c +#define QUSB2PHY_PLL_USER_CTL2 0x10 +#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c +#define QUSB2PHY_PLL_PWR_CTRL 0x18/* QUSB2PHY_PLL_STATUS register bits */ -#define PLL_LOCKED BIT(5) +#define PLL_LOCKED BIT(5)/* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */ -#define CORE_READY_STATUS BIT(0) +#define CORE_READY_STATUS BIT(0)/* QUSB2PHY_PORT_POWERDOWN register bits */ -#define CLAMP_N_EN BIT(5) -#define FREEZIO_N BIT(1) -#define POWER_DOWN BIT(0) +#define CLAMP_N_EN BIT(5) +#define FREEZIO_N BIT(1) +#define POWER_DOWN BIT(0)/* QUSB2PHY_PWR_CTRL1 register bits */ -#define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5) -#define PWR_CTRL1_CLAMP_N_EN BIT(1) +#define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5) +#define PWR_CTRL1_CLAMP_N_EN BIT(1) -#define QUSB2PHY_REFCLK_ENABLE BIT(0) +#define QUSB2PHY_REFCLK_ENABLE BIT(0) -#define PHY_CLK_SCHEME_SEL BIT(0) +#define PHY_CLK_SCHEME_SEL BIT(0)/* QUSB2PHY_INTR_CTRL register bits */ -#define DMSE_INTR_HIGH_SEL BIT(4) -#define DPSE_INTR_HIGH_SEL BIT(3) -#define CHG_DET_INTR_EN BIT(2) -#define DMSE_INTR_EN BIT(1) -#define DPSE_INTR_EN BIT(0) +#define DMSE_INTR_HIGH_SEL BIT(4) +#define DPSE_INTR_HIGH_SEL BIT(3) +#define CHG_DET_INTR_EN BIT(2) +#define DMSE_INTR_EN BIT(1) +#define DPSE_INTR_EN BIT(0)/* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */ -#define CORE_PLL_EN_FROM_RESET BIT(4) -#define CORE_RESET BIT(5) -#define CORE_RESET_MUX BIT(6) +#define CORE_PLL_EN_FROM_RESET BIT(4) +#define CORE_RESET BIT(5) +#define CORE_RESET_MUX BIT(6)/* QUSB2PHY_IMP_CTRL1 register bits */ -#define IMP_RES_OFFSET_MASK GENMASK(5, 0) -#define IMP_RES_OFFSET_SHIFT 0x0 +#define IMP_RES_OFFSET_MASK GENMASK(5, 0) +#define IMP_RES_OFFSET_SHIFT 0x0/* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */ -#define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0) -#define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0 +#define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0) +#define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0/* QUSB2PHY_CHG_CONTROL_2 register bits */ -#define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4) -#define CHG_CTRL2_OFFSET_SHIFT 0x4 +#define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4) +#define CHG_CTRL2_OFFSET_SHIFT 0x4/* QUSB2PHY_PORT_TUNE1 register bits */ -#define HSTX_TRIM_MASK GENMASK(7, 4) -#define HSTX_TRIM_SHIFT 0x4 -#define PREEMPH_WIDTH_HALF_BIT BIT(2) -#define PREEMPHASIS_EN_MASK GENMASK(1, 0) -#define PREEMPHASIS_EN_SHIFT 0x0 +#define HSTX_TRIM_MASK GENMASK(7, 4) +#define HSTX_TRIM_SHIFT 0x4 +#define PREEMPH_WIDTH_HALF_BIT BIT(2) +#define PREEMPHASIS_EN_MASK GENMASK(1, 0) +#define PREEMPHASIS_EN_SHIFT 0x0/* QUSB2PHY_PORT_TUNE2 register bits */ -#define HSDISC_TRIM_MASK GENMASK(1, 0) -#define HSDISC_TRIM_SHIFT 0x0 +#define HSDISC_TRIM_MASK GENMASK(1, 0) +#define HSDISC_TRIM_SHIFT 0x0 -#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04 -#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c -#define QUSB2PHY_PLL_CMODE 0x2c -#define QUSB2PHY_PLL_LOCK_DELAY 0x184 -#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4 -#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194 -#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198 -#define QUSB2PHY_PWR_CTRL2 0x214 -#define QUSB2PHY_IMP_CTRL1 0x220 -#define QUSB2PHY_IMP_CTRL2 0x224 -#define QUSB2PHY_CHG_CTRL2 0x23c +#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04 +#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c +#define QUSB2PHY_PLL_CMODE 0x2c +#define QUSB2PHY_PLL_LOCK_DELAY 0x184 +#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4 +#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194 +#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198 +#define QUSB2PHY_PWR_CTRL2 0x214 +#define QUSB2PHY_IMP_CTRL1 0x220 +#define QUSB2PHY_IMP_CTRL2 0x224 +#define QUSB2PHY_CHG_CTRL2 0x23cstruct qusb2_phy_init_tbl {unsigned int offset;
@@ -152,6 +152,35 @@ enum qusb2phy_reg_layout { .offset = o, .val = v, .in_layout = 1, \ } +static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = { +QUSB2_PHY_INIT_CFG (QUSB2PHY_PLL ,0x14 ), +QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TUNE1 ,0xF8 ), +QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TUNE2 ,0xB3 ), +QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TUNE3 ,0x83 ), +QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TUNE4 ,0xC0 ), +QUSB2_PHY_INIT_CFG (QUSB2PHY_PLL_TUNE ,0x30 ), +QUSB2_PHY_INIT_CFG (QUSB2PHY_PLL_USER_CTL1 ,0x79 ), +QUSB2_PHY_INIT_CFG (QUSB2PHY_PLL_USER_CTL2 ,0x21 ), +QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TUNE5 ,0x00 ), +QUSB2_PHY_INIT_CFG (QUSB2PHY_PLL_PWR_CTRL ,0x00 ), +QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TEST2 ,0x14 ), +QUSB2_PHY_INIT_CFG (QUSB2PHY_PLL_TEST ,0x80 ), +QUSB2_PHY_INIT_CFG (QUSB2PHY_PLL_AUTOPGM_CTL1 ,0x9F ), +}; + +static const unsigned int ipq6018_regs_layout[] = { + [QUSB2PHY_PLL_STATUS ] =0x38 , + [QUSB2PHY_PORT_TUNE1 ] =0x80 , + [QUSB2PHY_PORT_TUNE2 ] =0x84 , + [QUSB2PHY_PORT_TUNE3 ] =0x88 , + [QUSB2PHY_PORT_TUNE4 ] =0x8c , + [QUSB2PHY_PORT_TUNE5 ] =0x90 , + [QUSB2PHY_PORT_TEST1 ] =0x98 , + [QUSB2PHY_PORT_TEST2 ] =0x9c , + [QUSB2PHY_PORT_POWERDOWN ] =0xb4 , + [QUSB2PHY_INTR_CTRL ] =0xbc , +}; +static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TUNE1 ,0xf8 ),QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TUNE2 ,0x53 ),
@@ -176,19 +205,6 @@ static const unsigned int sm6115_regs_layout[] = { [QUSB2PHY_PORT_POWERDOWN] = 0xb4, [QUSB2PHY_INTR_CTRL] = 0xbc, }; -static const unsigned int ipq6018_regs_layout[] = { - [QUSB2PHY_PLL_STATUS ] =0x38 , - [QUSB2PHY_PORT_TUNE1 ] =0x80 , - [QUSB2PHY_PORT_TUNE2 ] =0x84 , - [QUSB2PHY_PORT_TUNE3 ] =0x88 , - [QUSB2PHY_PORT_TUNE4 ] =0x8C , - [QUSB2PHY_PORT_TUNE5 ] =0x90 , - [QUSB2PHY_PORT_TEST1 ] =0x98 , - [QUSB2PHY_PORT_TEST2 ] =0x9C , - [QUSB2PHY_PORT_POWERDOWN ] =0xB4 , - [QUSB2PHY_INTR_CTRL ] =0xBC , -}; -static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = {QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TUNE1 ,0xf8 ),QUSB2_PHY_INIT_CFG_L (QUSB2PHY_PORT_TUNE2 ,0xb3 ),
@@ -250,6 +266,17 @@ static const unsigned int qusb2_v2_regs_layout[] = { [QUSB2PHY_INTR_CTRL] = 0x230, }; +static const struct qusb2_phy_cfg ipq6018_phy_cfg = { + .tbl = ipq6018_init_tbl, + .tbl_num =ARRAY_SIZE (ipq6018_init_tbl), + .regs = ipq6018_regs_layout, + + .disable_ctrl =POWER_DOWN , + .mask_core_ready =PLL_LOCKED , +/* autoresume not used */ + .autoresume_en =BIT (0 ), +}; +static const struct qusb2_phy_cfg msm8996_phy_cfg = { .tbl = msm8996_init_tbl, .tbl_num =ARRAY_SIZE (msm8996_init_tbl),
@@ -310,6 +337,34 @@ static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = { .update_tune1_with_efuse = true, }; +/* struct override_param - structure holding qusb2 v2 phy overriding param +* set override true if the device tree property exists and read and assign +* to value +*/ +struct override_param { +bool override; +u8 value; +}; + +/*struct override_params - structure holding qusb2 v2 phy overriding params +* @imp_res_offset: rescode offset to be updated in IMP_CTRL1 register +* @hstx_trim: HSTX_TRIM to be updated in TUNE1 register +* @preemphasis: Amplitude Pre-Emphasis to be updated in TUNE1 register +* @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1 +* @bias_ctrl: bias ctrl to be updated in BIAS_CONTROL_2 register +* @charge_ctrl: charge ctrl to be updated in CHG_CTRL2 register +* @hsdisc_trim: disconnect threshold to be updated in TUNE2 register +*/ +struct override_params { +struct override_param imp_res_offset; +struct override_param hstx_trim; +struct override_param preemphasis; +struct override_param preemphasis_width; +struct override_param bias_ctrl; +struct override_param charge_ctrl; +struct override_param hsdisc_trim; +}; +/** * struct qusb2_phy - structure holding qusb2 phy attributes *
@@ -317,6 +372,8 @@ static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {* @base: iomapped memory space for qubs2 phy * * @cfg_ahb_clk: AHB2PHY interface clock +* @ref_clk: phy reference clock +* @iface_clk: phy interface clock * @phy_rst: phy reset control * * @cfg: phy config data
@@ -327,12 +384,56 @@ struct qusb2_phy {void __iomem *base;struct clk cfg_ahb_clk; +struct clk ref_clk; +struct clk iface_clk;struct reset_ctl phy_rst; +struct override_params overrides; +const struct qusb2_phy_cfg *cfg;bool has_se_clk_scheme; +bool phy_initialized; +enum phy_mode mode; }; +static inline void qusb2_write_mask (void __iomem *base,u32 offset, +u32 val,u32 mask) +{ +u32 reg; + + reg =readl (base + offset); + reg &= ~mask; + reg |= val & mask; +writel (reg, base + offset); + +/* Ensure above write is completed */ +readl (base + offset); +} + +static inline void qusb2_setbits (void __iomem *base,u32 offset,u32 val) +{ +u32 reg; + + reg =readl (base + offset); + reg |= val; +writel (reg, base + offset); + +/* Ensure above write is completed */ +readl (base + offset); +} + +static inline void qusb2_clrbits (void __iomem *base,u32 offset,u32 val) +{ +u32 reg; + + reg =readl (base + offset); + reg &= ~val; +writel (reg, base + offset); + +/* Ensure above write is completed */ +readl (base + offset); +} + static inline void qusb2_phy_configure(void __iomem *base, const unsigned int *regs, const struct qusb2_phy_init_tbl tbl[],
@@ -348,6 +449,68 @@ static inline void qusb2_phy_configure(void __iomem *base, } } +/* +* Update board specific PHY tuning override values if specified from +* device tree. +*/ +static void qusb2_phy_override_phy_params (struct qusb2_phy *qphy) +{ +const struct qusb2_phy_cfg *cfg = qphy->cfg; +struct override_params *or = &qphy->overrides; + +if (or->imp_res_offset.override) +qusb2_write_mask (qphy->base,QUSB2PHY_IMP_CTRL1 , + or->imp_res_offset.value <<IMP_RES_OFFSET_SHIFT , +IMP_RES_OFFSET_MASK ); + +if (or->bias_ctrl.override) +qusb2_write_mask (qphy->base,QUSB2PHY_PLL_BIAS_CONTROL_2 , + or->bias_ctrl.value <<BIAS_CTRL2_RES_OFFSET_SHIFT , +BIAS_CTRL2_RES_OFFSET_MASK ); + +if (or->charge_ctrl.override) +qusb2_write_mask (qphy->base,QUSB2PHY_CHG_CTRL2 , + or->charge_ctrl.value <<CHG_CTRL2_OFFSET_SHIFT , +CHG_CTRL2_OFFSET_MASK ); + +if (or->hstx_trim.override) +qusb2_write_mask (qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1 ], + or->hstx_trim.value <<HSTX_TRIM_SHIFT , +HSTX_TRIM_MASK ); + +if (or->preemphasis.override) +qusb2_write_mask (qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1 ], + or->preemphasis.value <<PREEMPHASIS_EN_SHIFT , +PREEMPHASIS_EN_MASK ); + +if (or->preemphasis_width.override) { +if (or->preemphasis_width.value == +QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT ) +qusb2_setbits (qphy->base, + cfg->regs[QUSB2PHY_PORT_TUNE1 ], +PREEMPH_WIDTH_HALF_BIT ); +else +qusb2_clrbits (qphy->base, + cfg->regs[QUSB2PHY_PORT_TUNE1 ], +PREEMPH_WIDTH_HALF_BIT ); + } + +if (or->hsdisc_trim.override) +qusb2_write_mask (qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2 ], + or->hsdisc_trim.value <<HSDISC_TRIM_SHIFT , +HSDISC_TRIM_MASK ); +} + +static int qusb2_phy_set_mode (struct phy *phy, +enum phy_mode mode,int submode) +{ +struct qusb2_phy *qphy =dev_get_priv (phy->dev); + + qphy->mode = mode; + +return 0 ; +} +static int qusb2phy_do_reset (struct qusb2_phy *qphy) {int ret;
@@ -387,6 +550,9 @@ static int qusb2phy_power_on(struct phy *phy)qusb2_phy_configure (qphy->base, cfg->regs, cfg->tbl, cfg->tbl_num); +/* Override board specific PHY tuning values */ +qusb2_phy_override_phy_params (qphy); +/* Enable the PHY */ clrbits_le32 (qphy->base + cfg->regs[QUSB2PHY_PORT_POWERDOWN ],POWER_DOWN );
@@ -401,6 +567,12 @@ static int qusb2phy_power_on(struct phy *phy)*/ qphy->has_se_clk_scheme = cfg->se_clk_scheme_default; +if (!qphy->has_se_clk_scheme) { + ret =clk_enable (&qphy->ref_clk); +if (ret) +return ret; + } +if (cfg->has_pll_test) {if (!qphy->has_se_clk_scheme) val &= ~CLK_REF_SEL ;
@@ -437,6 +609,8 @@ static int qusb2phy_power_off(struct phy *phy)reset_assert (&qphy->phy_rst);clk_disable (&qphy->cfg_ahb_clk); +clk_disable (&qphy->ref_clk); +clk_disable (&qphy->iface_clk);return 0 ; }
@@ -454,6 +628,22 @@ static int qusb2phy_clk_init(struct udevice *dev, struct qusb2_phy *qphy)if (ret)return ret; + ret =clk_get_by_name (dev,"ref" , &qphy->ref_clk); +if (ret == -ENOSYS || ret == -ENOENT ) +return 0 ; +if (ret) +return ret; + + ret =clk_get_by_name (dev,"iface" , &qphy->iface_clk); +if (ret == -ENOSYS || ret == -ENOENT ) +return 0 ; +if (ret) +return ret; + + ret =clk_enable (&qphy->iface_clk); +if (ret) +return ret; + ret =clk_enable (&qphy->cfg_ahb_clk);if (ret)return ret;
@@ -464,6 +654,8 @@ static int qusb2phy_clk_init(struct udevice *dev, struct qusb2_phy *qphy)static int qusb2phy_probe (struct udevice *dev) {struct qusb2_phy *qphy =dev_get_priv (dev); +struct override_params *or; +u32 value;int ret; qphy->base = (void __iomem *)dev_read_addr (dev);
@@ -488,6 +680,43 @@ static int qusb2phy_probe(struct udevice *dev)return -EINVAL ; } + or = &qphy->overrides; + +if (!dev_read_u32 (dev,"qcom,imp-res-offset-value" , &value)) { + or->imp_res_offset.value = (u8 )value; + or->imp_res_offset.override = true; + } + +if (!dev_read_u32 (dev,"qcom,bias-ctrl-value" , &value)) { + or->bias_ctrl.value = (u8 )value; + or->bias_ctrl.override = true; + } + +if (!dev_read_u32 (dev,"qcom,charge-ctrl-value" , &value)) { + or->charge_ctrl.value = (u8 )value; + or->charge_ctrl.override = true; + } + +if (!dev_read_u32 (dev,"qcom,hstx-trim-value" , &value)) { + or->hstx_trim.value = (u8 )value; + or->hstx_trim.override = true; + } + +if (!dev_read_u32 (dev,"qcom,preemphasis-level" , &value)) { + or->preemphasis.value = (u8 )value; + or->preemphasis.override = true; + } + +if (!dev_read_u32 (dev,"qcom,preemphasis-width" , &value)) { + or->preemphasis_width.value = (u8 )value; + or->preemphasis_width.override = true; + } + +if (!dev_read_u32 (dev,"qcom,hsdisc-trim-value" , &value)) { + or->hsdisc_trim.value = (u8 )value; + or->hsdisc_trim.override = true; + } +debug ("%s success qusb phy cfg %p\n" , __func__, qphy->cfg);return 0 ; }
@@ -495,6 +724,7 @@ static int qusb2phy_probe(struct udevice *dev)static struct phy_ops qusb2phy_ops = { .power_on = qusb2phy_power_on, .power_off = qusb2phy_power_off, + .set_mode = qusb2_phy_set_mode, };static const struct udevice_id qusb2phy_ids[] = {
@@ -507,6 +737,8 @@ static const struct udevice_id qusb2phy_ids[] = { .data = (ulong)&qcs615_phy_cfg }, { .compatible = "qcom,sdm660-qusb2-phy", .data = (ulong)&sdm660_phy_cfg }, + { .compatible = "qcom,ipq9574-qusb2-phy", + .data = (ulong)&ipq6018_phy_cfg }, { .compatible = "qcom,sm6115-qusb2-phy", .data = (ulong)&sm6115_phy_cfg }, { .compatible = "qcom,qusb2-v2-phy", .data = (ulong)&qusb2_v2_phy_cfg },
Signature · 1 line
2.34.1
PATCH 3/5 phy: qcom: Add QMP USB PHY driver
In reply to Varadarajan Narayanan via U-BootPort Qualcomm QMP USB PHY driver from Linux (v7.2-rc4). This PHY is available in many Qcom SoCs. Enabled and tested the driver on IPQ9574.
--- drivers/phy/qcom/Kconfig | 8 + drivers/phy/qcom/Makefile | 1 + drivers/phy/qcom/phy-qcom-qmp-pcs-misc-v4.h | 17 + drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v5.h | 36 + drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v6.h | 17 + drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v7.h | 17 + drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v8.h | 38 + drivers/phy/qcom/phy-qcom-qmp-pcs-v4_20.h | 15 + drivers/phy/qcom/phy-qcom-qmp-pcs-v5_20.h | 21 + drivers/phy/qcom/phy-qcom-qmp-pcs-v6-n4.h | 32 + drivers/phy/qcom/phy-qcom-qmp-pcs-v6.h | 2 + drivers/phy/qcom/phy-qcom-qmp-pcs-v7.h | 34 + drivers/phy/qcom/phy-qcom-qmp-pcs-v8.h | 32 + drivers/phy/qcom/phy-qcom-qmp-pcs-v8_50.h | 13 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v2.h | 109 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v6.h | 7 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v7.h | 87 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v8.h | 75 + drivers/phy/qcom/phy-qcom-qmp-qserdes-com.h | 231 +- drivers/phy/qcom/phy-qcom-qmp-qserdes-lalb-v8.h | 639 ++++++ drivers/phy/qcom/phy-qcom-qmp-qserdes-ln-shrd-v5.h | 11 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v2.h | 205 ++ drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v4_20.h | 43 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v5_20.h | 86 + .../phy/qcom/phy-qcom-qmp-qserdes-txrx-v5_5nm.h | 328 +++ drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v6.h | 1 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v6_n4.h | 64 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v7.h | 80 + drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v8.h | 68 + drivers/phy/qcom/phy-qcom-qmp-ufs.c | 136 +- drivers/phy/qcom/phy-qcom-qmp-usb.c | 2198 ++++++++++++++++++++ .../phy/qcom/phy-qcom-qmp-usb43-qserdes-com-v8.h | 224 ++ drivers/phy/qcom/phy-qcom-qmp.h | 142 +- 33 files changed, 4726 insertions(+), 291 deletions(-)
drivers/phy/qcom/Kconfig +8 -0
@@ -32,6 +32,14 @@ config PHY_QCOM_QMP_UFS help Enable this to support the UFS QMP PHY on various Qualcomm chipsets. +config PHY_QCOM_QMP_USB + bool "Qualcomm QMP USB PHY Driver" + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP USB PHY transceiver that is used + with USB3 controllers on Qualcomm chips. + config PHY_QCOM_QUSB2 bool "Qualcomm USB QUSB2 PHY driver" depends on PHY && ARCH_SNAPDRAGON
drivers/phy/qcom/Makefile +1 -0
@@ -3,6 +3,7 @@ obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o obj-$(CONFIG_PHY_QCOM_QMP_COMBO) += phy-qcom-qmp-combo.o obj-$(CONFIG_PHY_QCOM_QMP_PCIE) += phy-qcom-qmp-pcie.o obj-$(CONFIG_PHY_QCOM_QMP_UFS) += phy-qcom-qmp-ufs.o +obj-$(CONFIG_PHY_QCOM_QMP_USB) += phy-qcom-qmp-usb.o obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o
drivers/phy/qcom/phy-qcom-qmp-pcs-misc-v4.h new file +17 -0
@@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2017, The Linux Foundation. All rights reserved. +*/ + +#ifndef QCOM_PHY_QMP_PCS_MISC_V4_H_ +#define QCOM_PHY_QMP_PCS_MISC_V4_H_ + +/* Only for QMP V4 PHY - PCS_MISC registers */ +#define QPHY_V4_PCS_MISC_TYPEC_CTRL 0x00 +#define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL 0x04 +#define QPHY_V4_PCS_MISC_PCS_MISC_CONFIG1 0x08 +#define QPHY_V4_PCS_MISC_CLAMP_ENABLE 0x0c +#define QPHY_V4_PCS_MISC_TYPEC_STATUS 0x10 +#define QPHY_V4_PCS_MISC_PLACEHOLDER_STATUS 0x14 + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v5.h new file +36 -0
@@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2017, The Linux Foundation. All rights reserved. +*/ + +#ifndef QCOM_PHY_QMP_PCS_USB_V5_H_ +#define QCOM_PHY_QMP_PCS_USB_V5_H_ + +/* Only for QMP V5 PHY - USB3 have different offsets than V4 */ +#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1 0x000 +#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x004 +#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x008 +#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x00c +#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x010 +#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x014 +#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x018 +#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART 0x01c +#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL 0x020 +#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x024 +#define QPHY_V5_PCS_USB3_LFPS_CONFIG1 0x028 +#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x02c +#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x030 +#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x034 +#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x038 +#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x03c +#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x040 +#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x044 +#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x048 +#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY 0x04c +#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x050 +#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL 0x054 +#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x058 +#define QPHY_V5_PCS_USB3_TEST_CONTROL 0x05c +#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL 0x060 + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v6.h new file +17 -0
@@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2022, The Linux Foundation. All rights reserved. +*/ + +#ifndef QCOM_PHY_QMP_PCS_USB_V6_H_ +#define QCOM_PHY_QMP_PCS_USB_V6_H_ + +#define QPHY_V6_PCS_USB3_POWER_STATE_CONFIG1 0x00 +#define QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x08 +#define QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x14 +#define QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18 +#define QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c +#define QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40 +#define QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x44 + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v7.h new file +17 -0
@@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2023, Linaro Limited +*/ + +#ifndef QCOM_PHY_QMP_PCS_USB_V7_H_ +#define QCOM_PHY_QMP_PCS_USB_V7_H_ + +#define QPHY_V7_PCS_USB3_POWER_STATE_CONFIG1 0x00 +#define QPHY_V7_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x08 +#define QPHY_V7_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x14 +#define QPHY_V7_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18 +#define QPHY_V7_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c +#define QPHY_V7_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40 +#define QPHY_V7_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x44 + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-usb-v8.h new file +38 -0
@@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. +*/ + +#ifndef QCOM_PHY_QMP_PCS_USB_V8_H_ +#define QCOM_PHY_QMP_PCS_USB_V8_H_ + +#define QPHY_V8_PCS_USB_POWER_STATE_CONFIG1 0x00 +#define QPHY_V8_PCS_USB_AUTONOMOUS_MODE_STATUS 0x04 +#define QPHY_V8_PCS_USB_AUTONOMOUS_MODE_CTRL 0x08 +#define QPHY_V8_PCS_USB_AUTONOMOUS_MODE_CTRL2 0x0c +#define QPHY_V8_PCS_USB_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x10 +#define QPHY_V8_PCS_USB_LFPS_RXTERM_IRQ_CLEAR 0x14 +#define QPHY_V8_PCS_USB_LFPS_DET_HIGH_COUNT_VAL 0x18 +#define QPHY_V8_PCS_USB_LFPS_TX_ECSTART 0x1c +#define QPHY_V8_PCS_USB_LFPS_PER_TIMER_VAL 0x20 +#define QPHY_V8_PCS_USB_LFPS_TX_END_CNT_U3_START 0x24 +#define QPHY_V8_PCS_USB_LFPS_CONFIG1 0x28 +#define QPHY_V8_PCS_USB_RXEQTRAINING_LOCK_TIME 0x2c +#define QPHY_V8_PCS_USB_RXEQTRAINING_WAIT_TIME 0x30 +#define QPHY_V8_PCS_USB_RXEQTRAINING_CTLE_TIME 0x34 +#define QPHY_V8_PCS_USB_RXEQTRAINING_WAIT_TIME_S2 0x38 +#define QPHY_V8_PCS_USB_RXEQTRAINING_DFE_TIME_S2 0x3c +#define QPHY_V8_PCS_USB_RCVR_DTCT_DLY_U3_L 0x40 +#define QPHY_V8_PCS_USB_RCVR_DTCT_DLY_U3_H 0x44 +#define QPHY_V8_PCS_USB_ARCVR_DTCT_EN_PERIOD 0x48 +#define QPHY_V8_PCS_USB_ARCVR_DTCT_CM_DLY 0x4c +#define QPHY_V8_PCS_USB_TXONESZEROS_RUN_LENGTH 0x50 +#define QPHY_V8_PCS_USB_ALFPS_DEGLITCH_VAL 0x54 +#define QPHY_V8_PCS_USB_SIGDET_STARTUP_TIMER_VAL 0x58 +#define QPHY_V8_PCS_USB_TEST_CONTROL 0x5c +#define QPHY_V8_PCS_USB_RXTERMINATION_DLY_SEL 0x60 +#define QPHY_V8_PCS_USB_POWER_STATE_CONFIG2 0x64 +#define QPHY_V8_PCS_USB_POWER_STATE_CONFIG3 0x68 +#define QPHY_V8_PCS_USB_POWER_STATE_CONFIG4 0x6c + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-v4_20.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2017, The Linux Foundation. All rights reserved. +*/ + +#ifndef QCOM_PHY_QMP_PCS_V4_20_H_ +#define QCOM_PHY_QMP_PCS_V4_20_H_ + +/* Only for QMP V4_20 PHY - USB/PCIe PCS registers */ +#define QPHY_V4_20_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_V4_20_PCS_EQ_CONFIG2 0x1d8 +#define QPHY_V4_20_PCS_EQ_CONFIG4 0x1e0 +#define QPHY_V4_20_PCS_EQ_CONFIG5 0x1e4 + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-v5_20.h new file +21 -0
@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2022, Linaro Ltd. +*/ + +#ifndef QCOM_PHY_QMP_PCS_V5_20_H_ +#define QCOM_PHY_QMP_PCS_V5_20_H_ + +#define QPHY_V5_20_PCS_INSIG_SW_CTRL7 0x060 +#define QPHY_V5_20_PCS_INSIG_MX_CTRL7 0x07c +#define QPHY_V5_20_PCS_LOCK_DETECT_CONFIG1 0x0c4 +#define QPHY_V5_20_PCS_LOCK_DETECT_CONFIG2 0x0c8 +#define QPHY_V5_20_PCS_G3S2_PRE_GAIN 0x170 +#define QPHY_V5_20_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_V5_20_PCS_ALIGN_DETECT_CONFIG1 0x1b8 +#define QPHY_V5_20_PCS_ALIGN_DETECT_CONFIG2 0x1bc +#define QPHY_V5_20_PCS_EQ_CONFIG2 0x1d8 +#define QPHY_V5_20_PCS_EQ_CONFIG4 0x1e0 +#define QPHY_V5_20_PCS_EQ_CONFIG5 0x1e4 + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-v6-n4.h new file +32 -0
@@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2023, Linaro Limited +*/ + +#ifndef QCOM_PHY_QMP_PCS_V6_N4_H_ +#define QCOM_PHY_QMP_PCS_V6_N4_H_ + +/* Only for QMP V6 N4 PHY - USB/PCIe PCS registers */ +#define QPHY_V6_N4_PCS_SW_RESET 0x000 +#define QPHY_V6_N4_PCS_PCS_STATUS1 0x014 +#define QPHY_V6_N4_PCS_POWER_DOWN_CONTROL 0x040 +#define QPHY_V6_N4_PCS_START_CONTROL 0x044 +#define QPHY_V6_N4_PCS_POWER_STATE_CONFIG1 0x090 +#define QPHY_V6_N4_PCS_LOCK_DETECT_CONFIG1 0x0c4 +#define QPHY_V6_N4_PCS_LOCK_DETECT_CONFIG2 0x0c8 +#define QPHY_V6_N4_PCS_LOCK_DETECT_CONFIG3 0x0cc +#define QPHY_V6_N4_PCS_LOCK_DETECT_CONFIG6 0x0d8 +#define QPHY_V6_N4_PCS_REFGEN_REQ_CONFIG1 0x0dc +#define QPHY_V6_N4_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_V6_N4_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 +#define QPHY_V6_N4_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 +#define QPHY_V6_N4_PCS_RATE_SLEW_CNTRL1 0x198 +#define QPHY_V6_N4_PCS_RX_CONFIG 0x1b0 +#define QPHY_V6_N4_PCS_ALIGN_DETECT_CONFIG1 0x1c0 +#define QPHY_V6_N4_PCS_ALIGN_DETECT_CONFIG2 0x1c4 +#define QPHY_V6_N4_PCS_PCS_TX_RX_CONFIG 0x1d0 +#define QPHY_V6_N4_PCS_EQ_CONFIG1 0x1dc +#define QPHY_V6_N4_PCS_EQ_CONFIG2 0x1e0 +#define QPHY_V6_N4_PCS_EQ_CONFIG5 0x1ec + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-v6.h +2 -0
@@ -17,6 +17,8 @@#define QPHY_V6_PCS_LOCK_DETECT_CONFIG3 0x0cc#define QPHY_V6_PCS_LOCK_DETECT_CONFIG6 0x0d8#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1 0x0dc +#define QPHY_V6_PCS_G12S1_TXDEEMPH_M6DB 0x168 +#define QPHY_V6_PCS_G3S2_PRE_GAIN 0x170#define QPHY_V6_PCS_RX_SIGDET_LVL 0x188#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190#define QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
drivers/phy/qcom/phy-qcom-qmp-pcs-v7.h new file +34 -0
@@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2023, Linaro Limited +*/ + +#ifndef QCOM_PHY_QMP_PCS_V7_H_ +#define QCOM_PHY_QMP_PCS_V7_H_ + +/* Only for QMP V7 PHY - USB/PCIe PCS registers */ +#define QPHY_V7_PCS_SW_RESET 0x000 +#define QPHY_V7_PCS_PCS_STATUS1 0x014 +#define QPHY_V7_PCS_POWER_DOWN_CONTROL 0x040 +#define QPHY_V7_PCS_START_CONTROL 0x044 +#define QPHY_V7_PCS_POWER_STATE_CONFIG1 0x090 +#define QPHY_V7_PCS_LOCK_DETECT_CONFIG1 0x0c4 +#define QPHY_V7_PCS_LOCK_DETECT_CONFIG2 0x0c8 +#define QPHY_V7_PCS_LOCK_DETECT_CONFIG3 0x0cc +#define QPHY_V7_PCS_LOCK_DETECT_CONFIG6 0x0d8 +#define QPHY_V7_PCS_REFGEN_REQ_CONFIG1 0x0dc +#define QPHY_V7_PCS_G12S1_TXDEEMPH_M6DB 0x168 +#define QPHY_V7_PCS_G3S2_PRE_GAIN 0x170 +#define QPHY_V7_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 +#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 +#define QPHY_V7_PCS_RATE_SLEW_CNTRL1 0x198 +#define QPHY_V7_PCS_CDR_RESET_TIME 0x1b0 +#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG1 0x1c0 +#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG2 0x1c4 +#define QPHY_V7_PCS_PCS_TX_RX_CONFIG 0x1d0 +#define QPHY_V7_PCS_EQ_CONFIG1 0x1dc +#define QPHY_V7_PCS_EQ_CONFIG2 0x1e0 +#define QPHY_V7_PCS_EQ_CONFIG5 0x1ec + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-v8.h new file +32 -0
@@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. +*/ + +#ifndef QCOM_PHY_QMP_PCS_V8_H_ +#define QCOM_PHY_QMP_PCS_V8_H_ + +/* Only for QMP V8 PHY - USB/PCIe PCS registers */ +#define QPHY_V8_PCS_SW_RESET 0x000 +#define QPHY_V8_PCS_PCS_STATUS1 0x014 +#define QPHY_V8_PCS_POWER_DOWN_CONTROL 0x040 +#define QPHY_V8_PCS_START_CONTROL 0x044 +#define QPHY_V8_PCS_POWER_STATE_CONFIG1 0x090 +#define QPHY_V8_PCS_LOCK_DETECT_CONFIG1 0x0c4 +#define QPHY_V8_PCS_LOCK_DETECT_CONFIG2 0x0c8 +#define QPHY_V8_PCS_LOCK_DETECT_CONFIG3 0x0cc +#define QPHY_V8_PCS_LOCK_DETECT_CONFIG6 0x0d8 +#define QPHY_V8_PCS_REFGEN_REQ_CONFIG1 0x0dc +#define QPHY_V8_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_V8_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 +#define QPHY_V8_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 +#define QPHY_V8_PCS_RATE_SLEW_CNTRL1 0x198 +#define QPHY_V8_PCS_CDR_RESET_TIME 0x1b0 +#define QPHY_V8_PCS_ALIGN_DETECT_CONFIG1 0x1c0 +#define QPHY_V8_PCS_ALIGN_DETECT_CONFIG2 0x1c4 +#define QPHY_V8_PCS_PCS_TX_RX_CONFIG 0x1d0 +#define QPHY_V8_PCS_EQ_CONFIG1 0x1dc +#define QPHY_V8_PCS_EQ_CONFIG2 0x1e0 +#define QPHY_V8_PCS_EQ_CONFIG5 0x1ec + +#endif
drivers/phy/qcom/phy-qcom-qmp-pcs-v8_50.h new file +13 -0
@@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. +*/ + +#ifndef QCOM_PHY_QMP_PCS_V8_50_H_ +#define QCOM_PHY_QMP_PCS_V8_50_H_ + +#define QPHY_V8_50_PCS_STATUS1 0x010 +#define QPHY_V8_50_PCS_START_CONTROL 0x05c +#define QPHY_V8_50_PCS_POWER_DOWN_CONTROL 0x64 + +#endif
drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v2.h new file +109 -0
109 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v6.h +7 -0
@@ -86,4 +86,11 @@#define QSERDES_V6_COM_CMN_STATUS 0x1d0#define QSERDES_V6_COM_C_READY_STATUS 0x1f8 +#define QSERDES_V6_COM_ADAPTIVE_ANALOG_CONFIG 0x268 +#define QSERDES_V6_COM_CP_CTRL_ADAPTIVE_MODE0 0x26c +#define QSERDES_V6_COM_PLL_RCCTRL_ADAPTIVE_MODE0 0x270 +#define QSERDES_V6_COM_PLL_CCTRL_ADAPTIVE_MODE0 0x274 +#define QSERDES_V6_COM_CP_CTRL_ADAPTIVE_MODE1 0x278 +#define QSERDES_V6_COM_PLL_RCCTRL_ADAPTIVE_MODE1 0x27c +#define QSERDES_V6_COM_PLL_CCTRL_ADAPTIVE_MODE1 0x280#endif
drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v7.h new file +87 -0
87 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-com-v8.h new file +75 -0
75 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-com.h +100 -131
238 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-lalb-v8.h new file +639 -0
639 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-ln-shrd-v5.h new file +11 -0
@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* +* Copyright (c) 2025, The Linux Foundation. All rights reserved. +*/ + +#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V5_H_ +#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V5_H_ + +#define QSERDES_v5_LN_SHRD_UCDR_PI_CTRL2 0x04c + +#endif
drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v2.h new file +205 -0
205 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v4_20.h new file +43 -0
43 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v5_20.h new file +86 -0
86 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v5_5nm.h new file +328 -0
328 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v6.h +1 -0
@@ -6,6 +6,7 @@#ifndef QCOM_PHY_QMP_QSERDES_TXRX_USB_V6_H_ #define QCOM_PHY_QMP_QSERDES_TXRX_USB_V6_H_ +#define QSERDES_V6_TX_BIST_MODE_LANENO 0x00#define QSERDES_V6_TX_CLKBUF_ENABLE 0x08#define QSERDES_V6_TX_TX_EMP_POST1_LVL 0x0c#define QSERDES_V6_TX_TX_DRV_LVL 0x14
drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v6_n4.h new file +64 -0
64 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v7.h new file +80 -0
80 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx-v8.h new file +68 -0
68 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-ufs.c +68 -68
151 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-usb.c new file +2198 -0
497 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp-usb43-qserdes-com-v8.h new file +224 -0
224 lines not on this page · raw message
drivers/phy/qcom/phy-qcom-qmp.h +50 -92
142 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.34.1
Part of the diff is not shown here. View the raw message.
PATCH 4/5 configs: ipq9574: Enable fastboot support
In reply to Varadarajan Narayanan via U-BootEnable relevant configs like USB PHY, gadget, fastboot, fastboot MMC support etc. to enable fastboot flashing of IPQ9574 based boards.
--- configs/qcom_ipq9574_mmc_defconfig | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
configs/qcom_ipq9574_mmc_defconfig +17 -1
@@ -44,7 +44,7 @@ CONFIG_DWC_ETH_QOS=y CONFIG_DWC_ETH_QOS_QCOM=y CONFIG_RGMII=y CONFIG_PHY=y -CONFIG_PHY_QCOM_QMP_UFS=y +CONFIG_PHY_QCOM_QMP_USB=y CONFIG_PHY_QCOM_QUSB2=y CONFIG_PINCTRL=y CONFIG_PINCONF=y
@@ -53,3 +53,19 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_MSM_SERIAL=y CONFIG_MSM_GENI_SERIAL=y CONFIG_SOC_QCOM=y +CONFIG_USB=y +CONFIG_USB_GADGET=y +CONFIG_DM_USB_GADGET=y +CONFIG_CMD_USB=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_MISC=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT=y +CONFIG_CMD_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_BUF_ADDR=0x50000000 +CONFIG_FASTBOOT_BUF_SIZE=0x4000000
Signature · 1 line
2.34.1
PATCH 5/5 doc: board/qualcomm: Update RDP flashing instructions
In reply to Varadarajan Narayanan via U-BootUpdate the flashing instructions to include fastboot.
--- doc/board/qualcomm/rdp.rst | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
doc/board/qualcomm/rdp.rst +16 -0
@@ -42,6 +42,22 @@ on your device with:: U-Boot should be running after a reboot (``reset``). +This board is capable of network connectivity over ethernet. However, the +relevant network driver is not available yet for U-Boot. To restore the +original U-Boot or flash modified versions of the above built U-Boot, 'fastboot' +can be used. + + => setenv serial# ipq9574 + => fastboot usb 0 + + C:\>.\fastboot.exe devices + ipq9574 fastboot + + C:\>.\fastboot flash 0:APPSBL u-boot.mbn + Sending '0:APPSBL' (620 KB) OKAY [ 0.042s] + Writing '0:APPSBL' OKAY [ 0.030s] + Finished. Total time: 0.342s + .. WARNING Boards with newer software versions would automatically go the emergency download (EDL) mode if U-Boot is not functioning as expected. If its a
Signature · 1 line
2.34.1