Skip to contentSkip to conversation

tcan4x5x: initial commit

RFC PATCH New Sean Nyekjaer 1 participant 2 messages Aug 6 Char and misc drivers

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/2 tcan4x5x: initial commit

This driver will put the tcan4x5x device into sleep mode to reduce power consumption.

---
Not many drivers use SPI. So leave this for others to see how it can be done.
If this is appropriate for upstreaming, please comment :)

 drivers/misc/Kconfig    |   5 ++
 drivers/misc/Makefile   |   3 +
 drivers/misc/tcan4x5x.c | 135 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 143 insertions(+)
 create mode 100644 drivers/misc/tcan4x5x.c
drivers/misc/Kconfig +5 -0
index dde773ab6b1..2abfdb5575c 100644
@@ -170,6 +170,11 @@ config CMD_CROS_EC
 	  updating its flash, accessing a small saved context area
 	  and talking to the I2C bus behind the EC (if there is one).
 
+config TCAN4X5X
+	bool "Enable TCAN4X5X"
+	depends on MISC
+	depends on DM_GPIO
+
 config CROS_EC
 	bool "Enable Chrome OS EC"
 	help
drivers/misc/Makefile +3 -0
index 1d950f7a0ab..57ebafff121 100644
@@ -29,6 +29,9 @@ ifdef CONFIG_XPL_BUILD
 obj-$(CONFIG_SANDBOX) += spltest_sandbox.o
 endif
 endif
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_TCAN4X5X) += tcan4x5x.o
+endif
 obj-$(CONFIG_ALTERA_SYSID) += altera_sysid.o
 obj-$(CONFIG_ATSHA204A) += atsha204a-i2c.o
 obj-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o
drivers/misc/tcan4x5x.c new file +135 -0

135 lines not on this page · raw message

Signature · 1 line
2.55.0
#1 lore raw

RFC PATCH 2/2 tcan4x5x: set nwkrq voltage

nwkrq can be driven from vio or vsup voltage, read from devicetree to determine which rail should drive nwkrq.

---
 drivers/misc/tcan4x5x.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
drivers/misc/tcan4x5x.c +30 -0
index a304f3db9df..e9e63f06e13 100644
@@ -10,6 +10,7 @@
 
 #define TCAN4X5X_CONFIG 0x800
 #define TCAN4X5X_MODE_BITS (BIT(7) | BIT(6))
+#define TCAN4X5X_NWKRQ_VOLTAGE_VIO BIT(19)
 
 struct tcan4x5x_transfer {
 	u8 cmd;
@@ -87,6 +88,28 @@ static int tcan4x5x_enable_sleep(struct udevice *dev)
 	return ret;
 }
 
+static int tcan4x5x_nwkrq_vio(struct udevice *dev)
+{
+	u32 val;
+	int ret;
+
+	ret = tcan4x5x_read_reg(dev, TCAN4X5X_CONFIG, &val);
+	if (ret) {
+		log_err("failed to read from tcan4x5x\n");
+		return ret;
+	}
+
+	log_debug("read %x\n", val);
+	val |= TCAN4X5X_NWKRQ_VOLTAGE_VIO;
+	log_debug("write %x\n", val);
+
+	ret = tcan4x5x_write_reg(dev, TCAN4X5X_CONFIG, val);
+	if (ret)
+		log_err("reg write failed (%d)\n", ret);
+
+	return ret;
+}
+
 static int tcan4x5x_probe(struct udevice *dev)
 {
 	struct gpio_desc rst;
@@ -119,6 +142,13 @@ static int tcan4x5x_probe(struct udevice *dev)
 	 */
 	udelay(1000);
 
+	if (dev_read_bool(dev, "ti,nwkrq-voltage-vio")) {
+		log_debug("set nwkrq voltage to vio\n");
+		ret = tcan4x5x_nwkrq_vio(dev);
+		if (ret)
+			return ret;
+	}
+
 	return tcan4x5x_enable_sleep(dev);
 }
 
Signature · 1 line
2.55.0