Skip to contentSkip to conversation

FAILED: patch "[PATCH] ALSA: hda: codecs: hdmi: disable keep-alive before audio" failed to apply to 6.1-stable tree

PATCH New [email protected] 2 participants 2 messages Jul 29 – Aug 6

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x a3d6d3cedfe87bbd5a677d52b22ac20d28e59cf8
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026072952-shout-mandarin-8f3e@gregkh' --subject-prefix 'PATCH 6.1.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a3d6d3cedfe87bbd5a677d52b22ac20d28e59cf8 Mon Sep 17 00:00:00 2001
From: Kai Vehmanen <[email protected]>
Date: Wed, 15 Jul 2026 21:06:10 +0300
Subject: [PATCH] ALSA: hda: codecs: hdmi: disable keep-alive before audio
format change

When a keep-alive (KAE) silent stream is active on an Intel HDMI/DP codec, opening a real PCM stream reprograms the converter format and the audio infoframe in snd_hda_hdmi_generic_pcm_prepare(). Part of that reprogramming - the converter channel count and the channel mapping in snd_hda_hdmi_setup_audio_infoframe() - is not safe to do while a keep-alive stream is active. This is most visible when switching to a multichannel PCM configuration, where the active channel count actually changes. In that case the newly opened PCM stream plays no sound.

Add an optional hdmi_ops .prepare hook, called at the start of the PCM prepare sequence (before the format and infoframe are touched), and implement it for HSW+ to release keep-alive. Keep-alive is then re-enabled as before once the new stream has been set up, in the setup_stream op.

sound/hda/codecs/hdmi/hdmi.c +3 -0
index 1f4d646724ed..a4a2f2f0540c 100644
@@ -1688,6 +1688,9 @@ int snd_hda_hdmi_generic_pcm_prepare(struct hda_pcm_stream *hinfo,
 		per_pin->channels = substream->runtime->channels;
 		per_pin->setup = true;
 
+		if (spec->ops.prepare)
+			spec->ops.prepare(codec, per_pin);
+
 		if (get_wcaps(codec, cvt_nid) & AC_WCAP_STRIPE) {
 			stripe = snd_hdac_get_stream_stripe_ctl(&codec->bus->core,
 								substream);
sound/hda/codecs/hdmi/hdmi_local.h +9 -0
index 548241ad3fa9..dce9a335cff2 100644
@@ -74,6 +74,15 @@ struct hdmi_ops {
 			    hda_nid_t pin_nid, int dev_id, u32 stream_tag,
 			    int format);
 
+	/*
+	 * Optional hook invoked at the beginning of the PCM prepare
+	 * sequence, before the audio infoframe and stream format are
+	 * (re)programmed. Used to disable keep-alive / silent stream so
+	 * that the format change is not done while keep-alive is active.
+	 */
+	void (*prepare)(struct hda_codec *codec,
+			struct hdmi_spec_per_pin *per_pin);
+
 	void (*pin_cvt_fixup)(struct hda_codec *codec,
 			      struct hdmi_spec_per_pin *per_pin,
 			      hda_nid_t cvt_nid);
sound/hda/codecs/hdmi/intelhdmi.c +30 -6
index 6a7882544ab7..73141046d502 100644
@@ -418,6 +418,28 @@ static void intel_not_share_assigned_cvt_nid(struct hda_codec *codec,
 		intel_not_share_assigned_cvt(codec, pin_nid, dev_id, mux_idx);
 }
 
+/*
+ * prepare ops override for HSW+
+ *
+ * Disable keep-alive before the converter format and audio infoframe are
+ * reprogrammed by the PCM prepare sequence. Changing the audio format (e.g.
+ * the channel count when switching to multichannel PCM) while a keep-alive
+ * stream is active is not safe, so release keep-alive here, early in the
+ * sequence. It is re-enabled once the new stream has been set up, in
+ * i915_hsw_setup_stream().
+ */
+static void i915_hsw_prepare(struct hda_codec *codec,
+			     struct hdmi_spec_per_pin *per_pin)
+{
+	struct hdmi_spec *spec = codec->spec;
+
+	if (spec->silent_stream_type == SILENT_STREAM_KAE && per_pin->silent_stream) {
+		silent_stream_set_kae(codec, per_pin, false);
+		/* wait for pending transfers in codec to clear */
+		usleep_range(100, 200);
+	}
+}
+
 /* setup_stream ops override for HSW+ */
 static int i915_hsw_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
 				 hda_nid_t pin_nid, int dev_id, u32 stream_tag,
@@ -435,15 +457,16 @@ static int i915_hsw_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
 
 	haswell_verify_D0(codec, cvt_nid, pin_nid);
 
-	if (spec->silent_stream_type == SILENT_STREAM_KAE && per_pin && per_pin->silent_stream) {
-		silent_stream_set_kae(codec, per_pin, false);
-		/* wait for pending transfers in codec to clear */
-		usleep_range(100, 200);
-	}
-
 	res = snd_hda_hdmi_setup_stream(codec, cvt_nid, pin_nid, dev_id,
 					stream_tag, format);
 
+	/*
+	 * Keep-alive was disabled in i915_hsw_prepare(), re-enable it now.
+	 * The pin lookup above resolves to the same per_pin that prepare
+	 * used (pin_nid comes from that per_pin), so this stays balanced; a
+	 * NULL per_pin only occurs on a lookup failure that also implies no
+	 * active keep-alive stream to restore.
+	 */
 	if (spec->silent_stream_type == SILENT_STREAM_KAE && per_pin && per_pin->silent_stream) {
 		usleep_range(100, 200);
 		silent_stream_set_kae(codec, per_pin, true);
@@ -607,6 +630,7 @@ static int intel_hsw_common_init(struct hda_codec *codec, hda_nid_t vendor_nid,
 	codec->depop_delay = 0;
 	codec->auto_runtime_pm = 1;
 
+	spec->ops.prepare = i915_hsw_prepare;
 	spec->ops.setup_stream = i915_hsw_setup_stream;
 	spec->ops.pin_cvt_fixup = i915_pin_cvt_fixup;
 	spec->ops.silent_stream = i915_set_silent_stream;
maintainer
#1 lore raw

PATCH 1/1 ALSA: hda: codecs: hdmi: disable keep-alive before audio format change

From: Kai Vehmanen <[email protected]>

[ Upstream commit a3d6d3cedfe87bbd5a677d52b22ac20d28e59cf8 ]

When a keep-alive (KAE) silent stream is active on an Intel HDMI/DP codec, opening a real PCM stream reprograms the converter format and the audio infoframe in snd_hda_hdmi_generic_pcm_prepare(). Part of that reprogramming - the converter channel count and the channel mapping in snd_hda_hdmi_setup_audio_infoframe() - is not safe to do while a keep-alive stream is active. This is most visible when switching to a multichannel PCM configuration, where the active channel count actually changes. In that case the newly opened PCM stream plays no sound.

Add an optional hdmi_ops .prepare hook, called at the start of the PCM prepare sequence (before the format and infoframe are touched), and implement it for HSW+ to release keep-alive. Keep-alive is then re-enabled as before once the new stream has been set up, in the setup_stream op.

Fixes 15175a4f2bbb ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
[ adapted three hunks from the post-6.12 split files (hdmi.c/hdmi_local.h/intelhdmi.c) back into the monolithic sound/pci/hda/patch_hdmi.c, with the prepare hook un-indented one level since 6.12 uses plain mutex_lock() instead of scoped_guard() ]
---
 sound/pci/hda/patch_hdmi.c | 48 +++++++++++++++++++++++++++++++++-----
 1 file changed, 42 insertions(+), 6 deletions(-)
sound/pci/hda/patch_hdmi.c +42 -6
index f5712c0aeb504..83ba6dfd28c3b 100644
@@ -111,6 +111,15 @@ struct hdmi_ops {
 			    hda_nid_t pin_nid, int dev_id, u32 stream_tag,
 			    int format);
 
+	/*
+	 * Optional hook invoked at the beginning of the PCM prepare
+	 * sequence, before the audio infoframe and stream format are
+	 * (re)programmed. Used to disable keep-alive / silent stream so
+	 * that the format change is not done while keep-alive is active.
+	 */
+	void (*prepare)(struct hda_codec *codec,
+			struct hdmi_spec_per_pin *per_pin);
+
 	void (*pin_cvt_fixup)(struct hda_codec *codec,
 			      struct hdmi_spec_per_pin *per_pin,
 			      hda_nid_t cvt_nid);
@@ -2138,6 +2147,9 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 	per_pin->channels = substream->runtime->channels;
 	per_pin->setup = true;
 
+	if (spec->ops.prepare)
+		spec->ops.prepare(codec, per_pin);
+
 	if (get_wcaps(codec, cvt_nid) & AC_WCAP_STRIPE) {
 		stripe = snd_hdac_get_stream_stripe_ctl(&codec->bus->core,
 							substream);
@@ -2903,6 +2915,28 @@ static void register_i915_notifier(struct hda_codec *codec)
 	codec->relaxed_resume = 1;
 }
 
+/*
+ * prepare ops override for HSW+
+ *
+ * Disable keep-alive before the converter format and audio infoframe are
+ * reprogrammed by the PCM prepare sequence. Changing the audio format (e.g.
+ * the channel count when switching to multichannel PCM) while a keep-alive
+ * stream is active is not safe, so release keep-alive here, early in the
+ * sequence. It is re-enabled once the new stream has been set up, in
+ * i915_hsw_setup_stream().
+ */
+static void i915_hsw_prepare(struct hda_codec *codec,
+			     struct hdmi_spec_per_pin *per_pin)
+{
+	struct hdmi_spec *spec = codec->spec;
+
+	if (spec->silent_stream_type == SILENT_STREAM_KAE && per_pin->silent_stream) {
+		silent_stream_set_kae(codec, per_pin, false);
+		/* wait for pending transfers in codec to clear */
+		usleep_range(100, 200);
+	}
+}
+
 /* setup_stream ops override for HSW+ */
 static int i915_hsw_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
 				 hda_nid_t pin_nid, int dev_id, u32 stream_tag,
@@ -2920,15 +2954,16 @@ static int i915_hsw_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
 
 	haswell_verify_D0(codec, cvt_nid, pin_nid);
 
-	if (spec->silent_stream_type == SILENT_STREAM_KAE && per_pin && per_pin->silent_stream) {
-		silent_stream_set_kae(codec, per_pin, false);
-		/* wait for pending transfers in codec to clear */
-		usleep_range(100, 200);
-	}
-
 	res = hdmi_setup_stream(codec, cvt_nid, pin_nid, dev_id,
 				stream_tag, format);
 
+	/*
+	 * Keep-alive was disabled in i915_hsw_prepare(), re-enable it now.
+	 * The pin lookup above resolves to the same per_pin that prepare
+	 * used (pin_nid comes from that per_pin), so this stays balanced; a
+	 * NULL per_pin only occurs on a lookup failure that also implies no
+	 * active keep-alive stream to restore.
+	 */
 	if (spec->silent_stream_type == SILENT_STREAM_KAE && per_pin && per_pin->silent_stream) {
 		usleep_range(100, 200);
 		silent_stream_set_kae(codec, per_pin, true);
@@ -3104,6 +3139,7 @@ static int intel_hsw_common_init(struct hda_codec *codec, hda_nid_t vendor_nid,
 	codec->depop_delay = 0;
 	codec->auto_runtime_pm = 1;
 
+	spec->ops.prepare = i915_hsw_prepare;
 	spec->ops.setup_stream = i915_hsw_setup_stream;
 	spec->ops.pin_cvt_fixup = i915_pin_cvt_fixup;
 
Signature · 1 line
2.53.0