staging: vme_user: fix bounds check when vme_get_size() returns zero
PATCH 1/1 staging: vme_user: fix bounds check when vme_get_size() returns zero
vme_get_size() returns zero on failure, as its kerneldoc in vme.c states. vme_user_read() and vme_user_write() assign it to a size_t and check the file position with:
if ((*ppos < 0) || (*ppos > (image_size - 1)))
When image_size is zero, image_size - 1 wraps to SIZE_MAX. The test is then never true, so the check does nothing. The following statement,
count = image_size - *ppos;
wraps the same way whenever *ppos is greater than zero.
This is not an out-of-bounds access. resource_to_user() and resource_from_user() clamp count to size_buf, buffer_to_user() and buffer_from_user() clamp it to size_buf - *ppos, and vme_master_read() and vme_master_write() reject an offset greater than the window length. What happens instead is that read() and write() operate on a window whose size the driver failed to read, rather than returning at the check.
Compare *ppos against image_size directly. The two forms agree for a non-zero size, the new one is also correct for zero, and both wraps go away.
Found by reading the code after Dan Carpenter listed this as one of three outstanding bugs in this driver; see the Link below. Compile tested only. I have no VME hardware.
--- drivers/staging/vme_user/vme_user.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/vme_user/vme_user.c +2 -2
@@ -213,7 +213,7 @@ static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count, image_size =vme_get_size (image[minor].resource);/* Ensure we are starting at a valid location */ -if ((*ppos <0 ) || (*ppos > (image_size -1 ))) { +if ((*ppos <0 ) || (*ppos >= image_size)) {mutex_unlock (&image[minor].mutex);return 0 ; }
@@ -255,7 +255,7 @@ static ssize_t vme_user_write(struct file *file, const char __user *buf, image_size =vme_get_size (image[minor].resource);/* Ensure we are starting at a valid location */ -if ((*ppos <0 ) || (*ppos > (image_size -1 ))) { +if ((*ppos <0 ) || (*ppos >= image_size)) {mutex_unlock (&image[minor].mutex);return 0 ; }
Signature · 1 line
2.55.0.windows.1
Quoted 21 lines · Som Tripathi
vme_get_size()returns zero on failure, as its kerneldoc invme.cstates.vme_user_read()andvme_user_write()assign it to asize_tand check the file position with:if ((*ppos < 0) || (*ppos > (image_size - 1)))When
image_sizeis zero,image_size- 1 wraps toSIZE_MAX. The test is then never true, so the check does nothing. The following statement,count = image_size - *ppos;wraps the same way whenever *ppos is greater than zero.
This is not an out-of-bounds access.
resource_to_user()andresource_from_user()clamp count tosize_buf,buffer_to_user()andbuffer_from_user()clamp it tosize_buf- *ppos, andvme_master_read()andvme_master_write()reject an offset greater than the window length. What happens instead is thatread()andwrite()operate on a window whose size the driver failed to read, rather than returning at the check.
Quoted 6 lines
Compare *ppos against
image_sizedirectly. The two forms agree for a non-zero size, the new one is also correct for zero, and both wraps go away.Found by reading the code after Dan Carpenter listed this as one of three outstanding bugs in this driver;
There are probably more than three. :P
Quoted 16 lines
see the Link below. Compile
tested only. I have no VME hardware.Fixes f00a86d98a1e ("Staging: vme: add VME userspace driver")Signed-off-by Som Tripathi <[email protected]>Assisted-by Claude:claude-opus-5--- drivers/staging/vme_user/vme_user.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/staging/vme_user/vme_user.c +0
-0
drivers/staging/vme_user/vme_user.c static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count, · line 213
Quoted 1 line
drivers/staging/vme_user/vme_user.c +0
-0@@ -213,7 +213,7 @@ static ssize_t vme_user_read(struct file *file, char __user *buf, size_t count, image_size =vme_get_size (image[minor].resource);
It would be better to just add a check here.
if (!image_size) return 0;
Same for the other.
regards,
dan carpenter
Quoted 7 lines
drivers/staging/vme_user/vme_user.c +1
-1/* Ensure we are starting at a valid location */ -if ((*ppos <0 ) || (*ppos > (image_size -1 ))) { +if ((*ppos <0 ) || (*ppos >= image_size)) {mutex_unlock (&image[minor].mutex);return 0 ; }
Greg KH
maintainerQuoted 21 lines · Som Tripathi
vme_get_size()returns zero on failure, as its kerneldoc invme.cstates.vme_user_read()andvme_user_write()assign it to asize_tand check the file position with:if ((*ppos < 0) || (*ppos > (image_size - 1)))When
image_sizeis zero,image_size- 1 wraps toSIZE_MAX. The test is then never true, so the check does nothing. The following statement,count = image_size - *ppos;wraps the same way whenever *ppos is greater than zero.
This is not an out-of-bounds access.
resource_to_user()andresource_from_user()clamp count tosize_buf,buffer_to_user()andbuffer_from_user()clamp it tosize_buf- *ppos, andvme_master_read()andvme_master_write()reject an offset greater than the window length. What happens instead is thatread()andwrite()operate on a window whose size the driver failed to read, rather than returning at the check.
Quoted 7 lines
Compare *ppos against
image_sizedirectly. The two forms agree for a non-zero size, the new one is also correct for zero, and both wraps go away.Found by reading the code after Dan Carpenter listed this as one of three outstanding bugs in this driver; see the Link below. Compile tested only. I have no VME hardware.
Please see:
https://lore.kernel.org/all/2026080354-skater-urgent-31b2@gregkh/T/#u
for why I can't take this.
thanks,
greg k-h