Skip to contentSkip to conversation

Input: xpad - fix button mapping on Razer Atrox Xbox One

PATCH Superseded Vernon Di Carlo 2 participants 4 messages Aug 7

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Input: xpad - fix button mapping on Razer Atrox Xbox One

The Razer Atrox Arcade Stick for Xbox One (1532:0a00) does not use the standard Xbox One input layout for its shoulder and trigger buttons.

USB captures show that LB and RB are reported in bits 5 and 4 of byte 5 respectively, opposite to the standard Xbox One mapping. The digital LT and RT states are reported in bits 7 and 6 of byte 22 instead of the standard analog trigger fields.

As a result, xpad currently reports LB and RB swapped and does not report LT or RT at all.

Add an Atrox-specific mapping quirk to swap LB/RB and report LT/RT from their actual locations.

Tested with a Razer Atrox Arcade Stick for Xbox One, USB ID 1532:0a00.

---
 drivers/input/joystick/xpad.c | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)
drivers/input/joystick/xpad.c +19 -7
index feb8f368f..b9daa334e 100644
@@ -50,6 +50,7 @@
 #define MAP_PADDLES			BIT(4)
 #define MAP_PROFILE_BUTTON		BIT(5)
 #define MAP_SHARE_OFFSET		BIT(6)
+#define MAP_ATROX			BIT(7)
 
 #define DANCEPAD_MAP_CONFIG	(MAP_DPAD_TO_BUTTONS |			\
 				MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)
@@ -280,7 +281,8 @@ static const struct xpad_device {
 	{ 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick",
+	  MAP_TRIGGERS_TO_BUTTONS | MAP_ATROX, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a57, "Razer Wolverine V3 Pro (Wired)", 0, XTYPE_XBOX360 },
@@ -1110,8 +1112,13 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 		}
 
 		/* TL/TR */
-		input_report_key(dev, BTN_TL,	data[5] & BIT(4));
-		input_report_key(dev, BTN_TR,	data[5] & BIT(5));
+		if (xpad->mapping & MAP_ATROX) {
+			input_report_key(dev, BTN_TL, data[5] & BIT(5));
+			input_report_key(dev, BTN_TR, data[5] & BIT(4));
+		} else {
+			input_report_key(dev, BTN_TL, data[5] & BIT(4));
+			input_report_key(dev, BTN_TR, data[5] & BIT(5));
+		}
 
 		/* stick press left/right */
 		input_report_key(dev, BTN_THUMBL, data[5] & BIT(6));
@@ -1133,10 +1140,15 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 
 		/* triggers left/right */
 		if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
-			input_report_key(dev, BTN_TL2,
-					(__u16) le16_to_cpup((__le16 *)(data + 6)));
-			input_report_key(dev, BTN_TR2,
-					(__u16) le16_to_cpup((__le16 *)(data + 8)));
+			if ((xpad->mapping & MAP_ATROX) && len > 22) {
+				input_report_key(dev, BTN_TL2, data[22] & BIT(7));
+				input_report_key(dev, BTN_TR2, data[22] & BIT(6));
+			} else {
+				input_report_key(dev, BTN_TL2,
+						(__u16) le16_to_cpup((__le16 *)(data + 6)));
+				input_report_key(dev, BTN_TR2,
+						(__u16) le16_to_cpup((__le16 *)(data + 8)));
+			}
 		} else {
 			input_report_abs(dev, ABS_Z,
 					(__u16) le16_to_cpup((__le16 *)(data + 6)));
Signature · 1 line
2.53.0
#1 lore raw
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] Incorrect fallback logic for short packets on Razer Atrox Xbox One controllers --

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Incorrect fallback logic for short packets on Razer Atrox Xbox One controllers --

--- Patch [1]: [PATCH] Input: xpad - fix button mapping on Razer Atrox Xbox One --- commit 13a313431546b71a3cf1a1ca198625dd7324af1f
Author: Vernon Di Carlo <[email protected]>

Input: xpad - fix button mapping on Razer Atrox Xbox One

This commit adds a specific mapping quirk for the Razer Atrox Arcade Stick to swap LB/RB and correctly report the digital LT/RT states from byte 22.

Quoted 4 lines
drivers/input/joystick/xpad.c +0 -0
index feb8f368f834e..b9daa334e038b 100644

[ ... ]

drivers/input/joystick/xpad.c static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char · line 1146

Quoted 12 lines
drivers/input/joystick/xpad.c +4 -4
@@ -1133,10 +1140,15 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 
 		/* triggers left/right */
 		if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
-			input_report_key(dev, BTN_TL2,
-					(__u16) le16_to_cpup((__le16 *)(data + 6)));
-			input_report_key(dev, BTN_TR2,
-					(__u16) le16_to_cpup((__le16 *)(data + 8)));
+			if ((xpad->mapping & MAP_ATROX) && len > 22) {
+				input_report_key(dev, BTN_TL2, data[22] & BIT(7));
+				input_report_key(dev, BTN_TR2, data[22] & BIT(6));
+			} else {

[Severity: Medium]
If a Razer Atrox controller sends a packet with a length of 22 bytes or fewer, won't this fall through to the else block?

Does this cause the driver to incorrectly interpret data[6] and data[8] as trigger states and report spurious trigger events for this device?

Quoted 8 lines
drivers/input/joystick/xpad.c +5 -0
+				input_report_key(dev, BTN_TL2,
+						(__u16) le16_to_cpup((__le16 *)(data + 6)));
+				input_report_key(dev, BTN_TR2,
+						(__u16) le16_to_cpup((__le16 *)(data + 8)));
+			}
 		} else {
 			input_report_abs(dev, ABS_Z,
 					(__u16) le16_to_cpup((__le16 *)(data + 6)));
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
#2 lore raw

PATCH v2 1/1 Input: xpad - fix button mapping on Razer Atrox Xbox One

In reply to Vernon Di Carlo

The Razer Atrox Arcade Stick for Xbox One (1532:0a00) does not use the standard Xbox One input layout for its shoulder and trigger buttons.

USB captures show that LB and RB are reported in bits 5 and 4 of byte 5 respectively, opposite to the standard Xbox One mapping. The digital LT and RT states are reported in bits 7 and 6 of byte 22 instead of the standard analog trigger fields.

As a result, xpad currently reports LB and RB swapped and does not report LT or RT at all.

Add an Atrox-specific mapping quirk to swap LB/RB and report LT/RT from their actual locations.

Tested with a Razer Atrox Arcade Stick for Xbox One, USB ID 1532:0a00.

---

Notes:
Changes in v2:
- Reject short Atrox input packets instead of falling back to the standard Xbox One trigger layout.

 drivers/input/joystick/xpad.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)
drivers/input/joystick/xpad.c +22 -7
index feb8f368f..00de9145e 100644
@@ -50,6 +50,7 @@
 #define MAP_PADDLES			BIT(4)
 #define MAP_PROFILE_BUTTON		BIT(5)
 #define MAP_SHARE_OFFSET		BIT(6)
+#define MAP_ATROX			BIT(7)
 
 #define DANCEPAD_MAP_CONFIG	(MAP_DPAD_TO_BUTTONS |			\
 				MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)
@@ -280,7 +281,8 @@ static const struct xpad_device {
 	{ 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
 	{ 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
-	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick",
+	  MAP_TRIGGERS_TO_BUTTONS | MAP_ATROX, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a57, "Razer Wolverine V3 Pro (Wired)", 0, XTYPE_XBOX360 },
@@ -1079,6 +1081,9 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 					 error);
 		}
 	} else if (data[0] == GIP_CMD_INPUT) { /* The main valid packet type for inputs */
+		if ((xpad->mapping & MAP_ATROX) && len <= 22)
+			return;
+
 		/* menu/view buttons */
 		input_report_key(dev, BTN_START,  data[4] & BIT(2));
 		input_report_key(dev, BTN_SELECT, data[4] & BIT(3));
@@ -1110,8 +1115,13 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 		}
 
 		/* TL/TR */
-		input_report_key(dev, BTN_TL,	data[5] & BIT(4));
-		input_report_key(dev, BTN_TR,	data[5] & BIT(5));
+		if (xpad->mapping & MAP_ATROX) {
+			input_report_key(dev, BTN_TL, data[5] & BIT(5));
+			input_report_key(dev, BTN_TR, data[5] & BIT(4));
+		} else {
+			input_report_key(dev, BTN_TL, data[5] & BIT(4));
+			input_report_key(dev, BTN_TR, data[5] & BIT(5));
+		}
 
 		/* stick press left/right */
 		input_report_key(dev, BTN_THUMBL, data[5] & BIT(6));
@@ -1133,10 +1143,15 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 
 		/* triggers left/right */
 		if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
-			input_report_key(dev, BTN_TL2,
-					(__u16) le16_to_cpup((__le16 *)(data + 6)));
-			input_report_key(dev, BTN_TR2,
-					(__u16) le16_to_cpup((__le16 *)(data + 8)));
+			if (xpad->mapping & MAP_ATROX) {
+				input_report_key(dev, BTN_TL2, data[22] & BIT(7));
+				input_report_key(dev, BTN_TR2, data[22] & BIT(6));
+			} else {
+				input_report_key(dev, BTN_TL2,
+						(__u16) le16_to_cpup((__le16 *)(data + 6)));
+				input_report_key(dev, BTN_TR2,
+						(__u16) le16_to_cpup((__le16 *)(data + 8)));
+			}
 		} else {
 			input_report_abs(dev, ABS_Z,
 					(__u16) le16_to_cpup((__le16 *)(data + 6)));
Signature · 1 line
2.53.0
#3 lore raw
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] Handling GIP_CMD_ANNOUNCE in the URB completion handler calls xpad_start_input(), which sleeps and double-submits the URB. --

--- Patch [1]: [PATCH v2] Input: xpad - fix button mapping on Razer Atrox Xbox One --- commit f5450a413687f18b1cfa1f3ba3fe1938a5e5c72f
Author: Vernon Di Carlo <[email protected]>

Input: xpad - fix button mapping on Razer Atrox Xbox One

This patch adds an Atrox-specific mapping quirk to swap LB/RB and report LT/RT from their actual locations for the Razer Atrox Arcade Stick for Xbox One. It also rejects short Atrox input packets.

Quoted 4 lines
drivers/input/joystick/xpad.c +0 -0
index feb8f368f834e..00de9145e0916 100644

[ ... ]

drivers/input/joystick/xpad.c static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char · line 1082

Quoted 3 lines
drivers/input/joystick/xpad.c +0 -0
@@ -1079,6 +1081,9 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
 					 error);
 		}

[Severity: High]
This is a pre-existing issue, but while looking at this context, I noticed that handling GIP_CMD_ANNOUNCE here calls xpad_start_input(), which appears to sleep in atomic context and double-submit the URB.

Since xpadone_process_packet() is called from the URB completion handler xpad_irq_in() (atomic context), does calling xpad_start_input() trigger a sleeping in atomic context bug?

Looking at xpad_start_input(), it makes a GFP_KERNEL allocation and submits the URB:

    if (usb_submit_urb(xpad->irq_in, GFP_KERNEL))
        return -EIO;

Then when it returns, xpad_irq_in() subsequently attempts to submit the same URB a second time:

    retval = usb_submit_urb(urb, GFP_ATOMIC);

Could this lead to deadlocks or panics, and potentially corrupt the USB core state due to the double submission?

Quoted 4 lines
drivers/input/joystick/xpad.c +3 -0
 	} else if (data[0] == GIP_CMD_INPUT) { /* The main valid packet type for inputs */
+		if ((xpad->mapping & MAP_ATROX) && len <= 22)
+			return;
+
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1