s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL
Subsystems (5)
Anthony Krowiak
maintainerPATCH 1/1 s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL
The ap_driver structure has two fields which are function pointers to callbacks:
* .on_config_changed: called at the start of the AP bus scan function to notify the device driver that the host AP configuration has changed and the associated AP devices will be added or removed accordingly. This gives the implementor a chance to evaluate the configuration changes and respond to them before the associated devices are added or removed.
* .on_scan_complete: Called at the end of the AP bus scan function to notify the device driver that the host AP configuration has changed and the AP devices have been added or removed accordingly. This gives the implementor the opportunity to respond to the changes after the associated devices are added or removed.
These two callbacks are implemented in the vfio_ap device driver via the vfio_ap_on_cfg_changed and vfio_ap_on_scan_complete functions respectively.
Within the call stack of these two callback functions the matrix_mdev->kvm->lock mutex is taken without checking whether matrix_mdev->kvm is NULL or not. If matrix_mdev->kvm has never been set, trying to take the lock will trigger a NULL pointer dereference. This patch adds checks for matrix_mdev->kvm == NULL before taking the matrix_mdev->kvm->lock mutex.
It is important to make note of the following:
1. The matrix_dev->guests_lock is acquired at the start of both callback functions. This ensures that matrix_mdev will not be removed via the vfio_ap_mdev_remove function because it too takes matrix_dev_guests_lock before removing the object; so, matrix_mdev will be available for the duration of the callback functions.
2. The matrix_dev->mdevs_lock mutex must be taken in order to access fields within the matrix_mdev structure
3. matrix_mdev->kvm->lock mutex must be taken before the matrix_dev->mdevs_lock to prevent a lockdep splat.
4: The kvm->lock must be held while plugging the guest's AP configuration
into its SIE state description via the vfio_ap_mdev_update_guest_apcb function.
5. The vfio_ap_mdev_update_guest_apcb checks matrix_mdev->kvm to verify it is not NULL before doing the hot plug of the guest's AP configuration.
--- drivers/s390/crypto/vfio_ap_ops.c | 33 ++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-)
drivers/s390/crypto/vfio_ap_ops.c +24 -9
@@ -2606,7 +2606,15 @@ static void vfio_ap_mdev_cfg_remove(unsigned long *ap_remove,int do_remove =0 ;list_for_each_entry (matrix_mdev, &matrix_dev->mdev_list, node) { -mutex_lock (&matrix_mdev->kvm->lock); +/* +* If the mdev is attached to a KVM guest, we will need to +* hold the KVM lock in order to update the guest's AP +* configuration if any adapters, domains or control domains +* have been removed. +*/ +if (matrix_mdev->kvm) +mutex_lock (&matrix_mdev->kvm->lock); +mutex_lock (&matrix_dev->mdevs_lock); do_remove |= bitmap_and(aprem, ap_remove,
@@ -2624,7 +2632,8 @@ static void vfio_ap_mdev_cfg_remove(unsigned long *ap_remove, cdrem);mutex_unlock (&matrix_dev->mdevs_lock); -mutex_unlock (&matrix_mdev->kvm->lock); +if (matrix_mdev->kvm) +mutex_unlock (&matrix_mdev->kvm->lock); } }
@@ -2748,6 +2757,7 @@ static void vfio_ap_mdev_cfg_add(unsigned long *apm_add, unsigned long *aqm_add,vfio_ap_filter_apid_by_qtype (apm_add, aqm_add); +mutex_lock (&matrix_dev->mdevs_lock);list_for_each_entry (matrix_mdev, &matrix_dev->mdev_list, node) {bitmap_and (matrix_mdev->apm_add, matrix_mdev->matrix.apm, apm_add,AP_DEVICES );
@@ -2756,6 +2766,7 @@ static void vfio_ap_mdev_cfg_add(unsigned long *apm_add, unsigned long *aqm_add,bitmap_and (matrix_mdev->adm_add, matrix_mdev->matrix.adm, adm_add,AP_DEVICES ); } +mutex_unlock (&matrix_dev->mdevs_lock); }/**
@@ -2821,9 +2832,6 @@ static void vfio_ap_mdev_hot_plug_cfg(struct ap_matrix_mdev *matrix_mdev)DECLARE_BITMAP (apm_filtered,AP_DEVICES );bool filter_domains, filter_adapters, filter_cdoms, do_hotplug = false; -mutex_lock (&matrix_mdev->kvm->lock); -mutex_lock (&matrix_dev->mdevs_lock); - filter_adapters =bitmap_intersects (matrix_mdev->matrix.apm, matrix_mdev->apm_add,AP_DEVICES ); filter_domains = bitmap_intersects(matrix_mdev->matrix.aqm,
@@ -2841,9 +2849,6 @@ static void vfio_ap_mdev_hot_plug_cfg(struct ap_matrix_mdev *matrix_mdev)vfio_ap_mdev_update_guest_apcb (matrix_mdev);reset_queues_for_apids (matrix_mdev, apm_filtered); - -mutex_unlock (&matrix_dev->mdevs_lock); -mutex_unlock (&matrix_mdev->kvm->lock); } void vfio_ap_on_scan_complete(struct ap_config_info *new_config_info,
@@ -2854,15 +2859,25 @@ void vfio_ap_on_scan_complete(struct ap_config_info *new_config_info,mutex_lock (&matrix_dev->guests_lock);list_for_each_entry (matrix_mdev, &matrix_dev->mdev_list, node) { +if (matrix_mdev->kvm) +mutex_lock (&matrix_mdev->kvm->lock); + +mutex_lock (&matrix_dev->mdevs_lock); +if (bitmap_empty (matrix_mdev->apm_add,AP_DEVICES ) &&bitmap_empty (matrix_mdev->aqm_add,AP_DOMAINS ) &&bitmap_empty (matrix_mdev->adm_add,AP_DOMAINS )) -continue ; + goto unlock;vfio_ap_mdev_hot_plug_cfg (matrix_mdev);bitmap_clear (matrix_mdev->apm_add,0 ,AP_DEVICES );bitmap_clear (matrix_mdev->aqm_add,0 ,AP_DOMAINS );bitmap_clear (matrix_mdev->adm_add,0 ,AP_DOMAINS ); + +unlock: +mutex_unlock (&matrix_dev->mdevs_lock); +if (matrix_mdev->kvm) +mutex_unlock (&matrix_mdev->kvm->lock); }mutex_unlock (&matrix_dev->guests_lock);
Signature · 1 line
2.53.0
[email protected]
AI reviewThank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] Incorrect bitwise operation bitmap_andnot used instead of bitmap_and for control domains in vfio_ap_mdev_cfg_remove, preventing removal of unplugged domains. --
--- Patch [1]: [PATCH] s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL --- commit 7ae73def648a068715a8cdb4bf574ac5755f8e77
Author: Anthony Krowiak <[email protected]>
s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL
This commit adds NULL pointer checks for matrix_mdev->kvm prior to taking the kvm->lock mutex in the configuration change and scan complete callbacks. This prevents a NULL pointer dereference when the matrix mdev has no associated KVM instance.
Quoted 11 lines
drivers/s390/crypto/vfio_ap_ops.c +2
-1@@ -2606,7 +2606,15 @@ static void vfio_ap_mdev_cfg_remove(unsigned long *ap_remove,int do_remove =0 ;list_for_each_entry (matrix_mdev, &matrix_dev->mdev_list, node) { -mutex_lock (&matrix_mdev->kvm->lock); +/* +* If the mdev is attached to a KVM guest, we will need to
drivers/s390/crypto/vfio_ap_ops.c static void vfio_ap_mdev_cfg_remove(unsigned long *ap_remove, · line 2620
Quoted 10 lines
drivers/s390/crypto/vfio_ap_ops.c +7
-0+* hold the KVM lock in order to update the guest's AP +* configuration if any adapters, domains or control domains +* have been removed. +*/ +if (matrix_mdev->kvm) +mutex_lock (&matrix_mdev->kvm->lock); +mutex_lock (&matrix_dev->mdevs_lock); do_remove |= bitmap_and(aprem, ap_remove,
[Severity: High]
This is a pre-existing issue, but I noticed a potential logic flaw just below this context in vfio_ap_mdev_cfg_remove() within drivers/s390/crypto/vfio_ap_ops.c.
Does the control domain removal incorrectly use bitmap_andnot() instead of bitmap_and()?
When a host administrator or hypervisor unplugs a control domain, the code evaluates the removed domains using:
do_remove |= bitmap_andnot(cdrem, cd_remove, matrix_mdev->matrix.adm, AP_DOMAINS);
Since this evaluates to cd_remove & ~matrix_mdev->matrix.adm, doesn't this mean assigned domains that were removed from the host will resolve to 0?
Could this prevent explicitly unplugged control domains from being removed from the KVM guest, allowing it to retain access to hardware it shouldn't have?
[ ... ]
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
Anthony Krowiak
maintainerQuoted 55 lines · On 8/7/26 11:18 AM, [email protected] wrote:
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
Pre-existing issues:
- [High] Incorrect bitwise operationbitmap_andnotused instead ofbitmap_andfor control domains invfio_ap_mdev_cfg_remove, preventing removal of unplugged domains. ----- Patch [1]: [PATCH] s390/vfio-ap: Fix dereference
matrix_mdev->kvmwithout checking for NULL --- commit7ae73def648a068715a8cdb4bf574ac5755f8e77
Author: Anthony Krowiak <[email protected]>s390/vfio-ap: Fix dereference
matrix_mdev->kvmwithout checking for NULLThis commit adds NULL pointer checks for
matrix_mdev->kvmprior to taking thekvm->lockmutex in the configuration change and scan complete callbacks. This prevents a NULL pointer dereference when the matrix mdev has no associated KVM instance.Quoted 11 lines
drivers/s390/crypto/vfio_ap_ops.c +2
-1@@ -2606,7 +2606,15 @@ static void vfio_ap_mdev_cfg_remove(unsigned long *ap_remove,int do_remove =0 ;list_for_each_entry (matrix_mdev, &matrix_dev->mdev_list, node) { -mutex_lock (&matrix_mdev->kvm->lock); +/* +* If the mdev is attached to a KVM guest, we will need to drivers/s390/crypto/vfio_ap_ops.c static void vfio_ap_mdev_cfg_remove(unsigned long *ap_remove, · line 2620
Quoted 10 lines
drivers/s390/crypto/vfio_ap_ops.c +7
-0+* hold the KVM lock in order to update the guest's AP +* configuration if any adapters, domains or control domains +* have been removed. +*/ +if (matrix_mdev->kvm) +mutex_lock (&matrix_mdev->kvm->lock); +mutex_lock (&matrix_dev->mdevs_lock); do_remove |= bitmap_and(aprem, ap_remove,[Severity: High]
This is a pre-existing issue, but I noticed a potential logic flaw just below this context invfio_ap_mdev_cfg_remove()withindrivers/s390/crypto/vfio_ap_ops.c.Does the control domain removal incorrectly use
bitmap_andnot()instead ofbitmap_and()?When a host administrator or hypervisor unplugs a control domain, the code evaluates the removed domains using:
do_remove |= bitmap_andnot(cdrem, cd_remove, matrix_mdev->matrix.adm, AP_DOMAINS);
Quoted 6 lines
Since this evaluates to
cd_remove& ~matrix_mdev->matrix.adm, doesn't this mean assigned domains that were removed from the host will resolve to 0?Could this prevent explicitly unplugged control domains from being removed from the KVM guest, allowing it to retain access to hardware it shouldn't have?
This looks like a cut and paste error from long ago. bitmap_and should have been used as it was for the other bitmaps instead of bitmap_andnot.
Quoted 3 lines
[ ... ]