arm64: Select HAVE_SHARED_GPIOS for ARCH_MXC
Subsystems (3)
PATCH 1/2 arm64: Select HAVE_SHARED_GPIOS for ARCH_MXC
Some NXP i.MX platforms use shared GPIOs. Enable support for them by selecting the Kconfig switch provided by GPIOLIB.
---
Cc: Bartosz Golaszewski <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Conor Dooley <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Fedor Ross <[email protected]>
Cc: Frank Li <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
--- arch/arm64/Kconfig.platforms | 1 + 1 file changed, 1 insertion(+)
arch/arm64/Kconfig.platforms +1 -0
@@ -275,6 +275,7 @@ config ARCH_MXC bool "NXP i.MX SoC family" select ARM64_ERRATUM_843419 select ARM64_ERRATUM_845719 if COMPAT + select HAVE_SHARED_GPIOS select IMX_GPCV2 select IMX_GPCV2_PM_DOMAINS select PM
Signature · 1 line
2.53.0
PATCH 2/2 arm64: dts: imx8mn: Expand EEPROM description on ifm VHIP4 EvalBoard
Describe the EEPROM write protect GPIOs and labels on VHIP4 EvalBoard.
---
Cc: Bartosz Golaszewski <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Conor Dooley <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Fedor Ross <[email protected]>
Cc: Frank Li <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
--- .../imx8mn-vhip4-evalboard-common.dtsi | 3 +- .../freescale/imx8mn-vhip4-evalboard-v1.dts | 8 ++++++ .../freescale/imx8mn-vhip4-evalboard-v2.dts | 28 ++++++++++++++++--- 3 files changed, 34 insertions(+), 5 deletions(-)
arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-common.dtsi +2 -1
@@ -142,8 +142,9 @@ &i2c1 { pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; - eeprom@51 { + cfg_eeprom: eeprom@51 { compatible = "atmel,24c128"; + label = "ifm-deviceinfo"; reg = <0x51>; };
arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v1.dts +8 -0
@@ -13,6 +13,11 @@ / { "ifm,imx8mn-vhip4", "fsl,imx8mn"; }; +&cfg_eeprom { + /* Shared with logging EEPROM on v1 hardware */ + wp-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>; +}; + &ifm_led { pinctrl-1 = <&pinctrl_gpio_led_v1>;
@@ -90,7 +95,10 @@ temperature-sensor@48 { eeprom@50 { compatible = "atmel,24c128"; + label = "ifm-logging"; reg = <0x50>; + /* Shared with configuration EEPROM on v1 hardware */ + wp-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>; }; };
arch/arm64/boot/dts/freescale/imx8mn-vhip4-evalboard-v2.dts +24 -4
@@ -20,6 +20,12 @@ multi-led { }; }; +&cfg_eeprom { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cfgeeprom>; + wp-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; +}; + &ifm_led { pinctrl-1 = <&pinctrl_gpio_led_v2>;
@@ -87,7 +93,11 @@ temperature-sensor@48 { eeprom@54 { compatible = "atmel,24c128"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_logeeprom>; + label = "ifm-logging"; reg = <0x54>; + wp-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; }; };
@@ -103,6 +113,13 @@ &ifm_pmic { }; &iomuxc { + pinctrl_cfgeeprom: cfgeeprom-grp { + fsl,pins = < + /* CFG_EEPROM_WP */ + MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x140 + >; + }; + pinctrl_ecspi1_cs: ecspi1-cs-grp { fsl,pins = < /* KS8794 nCS */
@@ -143,12 +160,8 @@ pinctrl_i2c1_gpio: i2c1-gpio-grp { fsl,pins = < MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x56 MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0xd6 - /* CFG_EEPROM_WP */ - MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x140 /* RTC_nIRQ */ MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x116 - /* LOG_EE_WP */ - MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x140 >; };
@@ -166,6 +179,13 @@ MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0xd6 >; }; + pinctrl_logeeprom: logeeprom-grp { + fsl,pins = < + /* LOG_EE_WP */ + MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x140 + >; + }; + pinctrl_mcp2518: mcp2518-grp { fsl,pins = < /* CAN0_CLKO */
Signature · 1 line
2.53.0
Re: [PATCH 2/2] arm64: dts: imx8mn: Expand EEPROM description on ifm VHIP4 EvalBoard
Quoted 4 lines · Marek Vasut
Describe the EEPROM write protect GPIOs and labels on VHIP4 EvalBoard.
Signed-off-by Marek Vasut <[email protected]>---
Quoted 5 lines · Marek Vasut
Some NXP i.MX platforms use shared GPIOs. Enable support for them by selecting the
Kconfigswitch provided by GPIOLIB.Signed-off-by Marek Vasut <[email protected]>---
Haibo have similar patch
https://lore.kernel.org/imx/[email protected]/
But I hope the SoC maintainer provide review/ack-by tags
Frank
Quoted 35 lines
Cc Bartosz Golaszewski <[email protected]>Cc Catalin Marinas <[email protected]>Cc Conor Dooley <[email protected]>Cc Fabio Estevam <[email protected]>Cc Fedor Ross <[email protected]>Cc Frank Li <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Cc Linus Walleij <[email protected]>Cc Mark Rutland <[email protected]>Cc Rob Herring <[email protected]>Cc Will Deacon <[email protected]>--- arch/arm64/Kconfig.platforms | 1 + 1 file changed, 1 insertion(+)arch/arm64/Kconfig.platforms +1
-1@@ -275,6 +275,7 @@ config ARCH_MXC bool "NXP i.MX SoC family" select ARM64_ERRATUM_843419 select ARM64_ERRATUM_845719 if COMPAT + select HAVE_SHARED_GPIOS select IMX_GPCV2 select IMX_GPCV2_PM_DOMAINS select PM --2.53.0
Quoted 11 lines · Frank Li
Quoted 5 lines · Marek Vasut
Some NXP i.MX platforms use shared GPIOs. Enable support for them by selecting the
Kconfigswitch provided by GPIOLIB.Signed-off-by Marek Vasut <[email protected]>---
Haibo have similar patch
https://lore.kernel.org/imx/[email protected]/But I hope the SoC maintainer provide review/ack-by tags
This patch keeps the list of select-ed Kconfig symbols sorted, the one from Haibo does not. But with that fixed, the patches are equivalent.
Quoted 37 lines · Marek Vasut
Some NXP i.MX platforms use shared GPIOs. Enable support for them by selecting the
Kconfigswitch provided by GPIOLIB.Signed-off-by Marek Vasut <[email protected]>---
Cc: Bartosz Golaszewski <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Conor Dooley <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Fedor Ross <[email protected]>
Cc: Frank Li <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]--- arch/arm64/Kconfig.platforms | 1 + 1 file changed, 1 insertion(+)arch/arm64/Kconfig.platforms +1
-1@@ -275,6 +275,7 @@ config ARCH_MXC bool "NXP i.MX SoC family" select ARM64_ERRATUM_843419 select ARM64_ERRATUM_845719 if COMPAT + select HAVE_SHARED_GPIOS select IMX_GPCV2 select IMX_GPCV2_PM_DOMAINS select PM --
Quoted 3 lines
2.53.0
[email protected]
AppliedRe: (subset) [PATCH 1/2] arm64: Select HAVE_SHARED_GPIOS for ARCH_MXC
In reply to Marek VasutFrom: Frank Li <[email protected]>
Quoted 2 lines · Marek Vasut
Some NXP i.MX platforms use shared GPIOs. Enable support for them by selecting the
Kconfigswitch provided by GPIOLIB.
Applied, thanks!
[2/2] arm64: dts: imx8mn: Expand EEPROM description on ifm VHIP4 EvalBoard
commit: 5c67d91ae29a3923fe170845ae3800e4d11225e1
Move reg as second property
Best regards,
--
Frank Li <[email protected]>