rtc: abx80x: add support for abx81x

index 5486d9d0b1e5..fdf9664ebb6f 100644
@@ -294,7 +294,7 @@ static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 
 	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ASC,
 					    sizeof(buf), buf);
-	if (err)
+	if (err < 0)
 		return err;
 
 	irq_mask = i2c_smbus_read_byte_data(client, ABX8XX_REG_IRQ);

index fdf9664ebb6f..0c8d3416fd5a 100644
@@ -15,6 +15,7 @@
 #include <linux/i2c.h>
 #include <linux/kstrtox.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/rtc.h>
 #include <linux/watchdog.h>

@@ -127,6 +128,7 @@ struct abx80x_priv {
 	struct rtc_device *rtc;
 	struct i2c_client *client;
 	struct watchdog_device wdog;
+	struct mutex lock;
 };
 
 static int abx80x_write_config_key(struct i2c_client *client, u8 key)

@@ -219,6 +221,7 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	unsigned char buf[8];
 	int err, flags;
 

@@ -234,6 +237,8 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	buf[ABX8XX_REG_YR] = bin2bcd(tm->tm_year - 100);
 	buf[ABX8XX_REG_WD] = tm->tm_wday;
 
+	guard(mutex)(&priv->lock);
+
 	err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_HTH,
 					     sizeof(buf), buf);
 	if (err < 0) {

@@ -263,6 +268,8 @@ static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
 	struct rtc_device *rtc = priv->rtc;
 	int status;
 
+	guard(mutex)(&priv->lock);
+
 	status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
 	if (status < 0)
 		return IRQ_NONE;

@@ -317,6 +324,7 @@ static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	u8 alarm[6];
 	int err;
 

@@ -330,6 +338,8 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	alarm[4] = bin2bcd(t->time.tm_mday);
 	alarm[5] = bin2bcd(t->time.tm_mon + 1);
 
+	guard(mutex)(&priv->lock);
+
 	err = i2c_smbus_write_i2c_block_data(client, ABX8XX_REG_AHTH,
 					     sizeof(alarm), alarm);
 	if (err < 0) {

@@ -352,6 +362,7 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 					  int autocalibration)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	int retval, flags = 0;
 
 	if ((autocalibration != 0) && (autocalibration != 1024) &&

@@ -360,6 +371,8 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 		return -EINVAL;
 	}
 
+	guard(mutex)(&priv->lock);
+
 	flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
 	if (flags < 0)
 		return flags;

@@ -443,6 +456,7 @@ static ssize_t oscillator_store(struct device *dev,
 				const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	int retval, flags, rc_mode = 0;
 
 	if (strncmp(buf, "rc", 2) == 0) {

@@ -454,6 +468,8 @@ static ssize_t oscillator_store(struct device *dev,
 		return -EINVAL;
 	}
 
+	guard(mutex)(&priv->lock);
+
 	flags =  i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
 	if (flags < 0)
 		return flags;

@@ -511,8 +527,11 @@ static const struct attribute_group rtc_calib_attr_group = {
 static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	int err;
 
+	guard(mutex)(&priv->lock);
+
 	if (enabled)
 		err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
 						(ABX8XX_IRQ_IM_1_4 |

@@ -526,6 +545,7 @@ static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
 static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	int status, tmp;
 
 	switch (cmd) {

@@ -539,16 +559,18 @@ static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 		return put_user(tmp, (unsigned int __user *)arg);
 
 	case RTC_VL_CLR:
-		status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
-		if (status < 0)
-			return status;
+		scoped_guard(mutex, &priv->lock) {
+			status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
+			if (status < 0)
+				return status;
 
-		status &= ~ABX8XX_STATUS_BLF;
+			status &= ~ABX8XX_STATUS_BLF;
 
-		tmp = i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS,
-						status);
-		if (tmp < 0)
-			return tmp;
+			tmp = i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS,
+							status);
+			if (tmp < 0)
+				return tmp;
+		}
 
 		return 0;
 

@@ -617,6 +639,8 @@ static int __abx80x_wdog_set_timeout(struct watchdog_device *wdog,
 	struct abx80x_priv *priv = watchdog_get_drvdata(wdog);
 	u8 val = ABX8XX_WDT_WDS | timeout_bits(timeout);
 
+	guard(mutex)(&priv->lock);
+
 	/*
 	 * Writing any timeout to the WDT register resets the watchdog timer.
 	 * Writing 0 disables it.

@@ -701,6 +725,8 @@ static int abx80x_nvmem_xfer(struct abx80x_priv *priv, unsigned int offset,
 		len = min(lower + bytes, (size_t)ABX8XX_SRAM_WIN_SIZE) - lower;
 		len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
 
+		guard(mutex)(&priv->lock);
+
 		ret = i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_EXTRAM,
 						extram);
 		if (ret)

@@ -908,6 +934,9 @@ static int abx80x_probe(struct i2c_client *client)
 
 	priv->rtc->ops = &abx80x_rtc_ops;
 	priv->client = client;
+	err = devm_mutex_init(&client->dev, &priv->lock);
+	if (err)
+		return err;
 
 	i2c_set_clientdata(client, priv);
 

index 0c8d3416fd5a..485d1ea08030 100644
@@ -51,12 +51,18 @@
 #define ABX8XX_CTRL2_RSVD	BIT(5)
 
 #define ABX8XX_REG_IRQ		0x12
+#define ABX8XX_IRQ_EX1E		BIT(0)
+#define ABX8XX_IRQ_EX2E		BIT(1)
 #define ABX8XX_IRQ_AIE		BIT(2)
+#define ABX8XX_IRQ_TIE		BIT(3)
+#define ABX8XX_IRQ_BLIE		BIT(4)
 #define ABX8XX_IRQ_IM_1_4	(0x3 << 5)
 
 #define ABX8XX_REG_CD_TIMER_CTL	0x18
 
 #define ABX8XX_REG_OSC		0x1c
+#define ABX8XX_OSC_ACIE		BIT(0)
+#define ABX8XX_OSC_OFIE		BIT(1)
 #define ABX8XX_OSC_FOS		BIT(3)
 #define ABX8XX_OSC_BOS		BIT(4)
 #define ABX8XX_OSC_ACAL_512	BIT(5)

@@ -266,27 +272,34 @@ static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
 	struct i2c_client *client = dev_id;
 	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	struct rtc_device *rtc = priv->rtc;
+	irqreturn_t handled = IRQ_NONE;
 	int status;
 
 	guard(mutex)(&priv->lock);
 
 	status = i2c_smbus_read_byte_data(client, ABX8XX_REG_STATUS);
 	if (status < 0)
-		return IRQ_NONE;
+		return handled;
 
-	if (status & ABX8XX_STATUS_AF)
+	if (status & ABX8XX_STATUS_AF) {
 		rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
+		handled = IRQ_HANDLED;
+	}
 
 	/*
 	 * It is unclear if we'll get an interrupt before the external
 	 * reset kicks in.
 	 */
-	if (status & ABX8XX_STATUS_WDT)
+	if (status & ABX8XX_STATUS_WDT) {
 		dev_alert(&client->dev, "watchdog timeout interrupt.\n");
+		handled = IRQ_HANDLED;
+	}
 
-	i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS, 0);
+	if (handled == IRQ_HANDLED)
+		i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS,
+					  status & ~(ABX8XX_STATUS_AF | ABX8XX_STATUS_WDT));
 
-	return IRQ_HANDLED;
+	return handled;
 }
 
 static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)

@@ -950,6 +963,37 @@ static int abx80x_probe(struct i2c_client *client)
 	if (err)
 		return err;
 
+	/* Disable unused interrupts */
+	data = i2c_smbus_read_byte_data(client, ABX8XX_REG_IRQ);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read irq register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_IRQ,
+					data & ~(ABX8XX_IRQ_EX1E |
+						 ABX8XX_IRQ_EX2E |
+						 ABX8XX_IRQ_TIE |
+						 ABX8XX_IRQ_BLIE));
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write irq register\n");
+		return -EIO;
+	}
+
+	data = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
+	if (data < 0) {
+		dev_err(&client->dev, "Unable to read Oscillator Control register\n");
+		return -EIO;
+	}
+
+	err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC,
+					data & ~(ABX8XX_OSC_ACIE |
+						 ABX8XX_OSC_OFIE));
+	if (err < 0) {
+		dev_err(&client->dev, "Unable to write Oscillator Control register\n");
+		return -EIO;
+	}
+
 	if (client->irq > 0) {
 		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
 		err = devm_request_threaded_irq(&client->dev, client->irq, NULL,

index 485d1ea08030..12a4dbfec639 100644
@@ -135,6 +135,7 @@ struct abx80x_priv {
 	struct i2c_client *client;
 	struct watchdog_device wdog;
 	struct mutex lock;
+	int irq;
 };
 
 static int abx80x_write_config_key(struct i2c_client *client, u8 key)

@@ -305,11 +306,12 @@ static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
 static int abx80x_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct abx80x_priv *priv = i2c_get_clientdata(client);
 	unsigned char buf[7];
 
 	int irq_mask, err;
 
-	if (client->irq <= 0)
+	if (priv->irq <= 0)
 		return -EINVAL;
 
 	err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_ASC,

@@ -341,7 +343,7 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	u8 alarm[6];
 	int err;
 
-	if (client->irq <= 0)
+	if (priv->irq <= 0)
 		return -EINVAL;
 
 	alarm[0] = 0x0;

@@ -947,6 +949,7 @@ static int abx80x_probe(struct i2c_client *client)
 
 	priv->rtc->ops = &abx80x_rtc_ops;
 	priv->client = client;
+	priv->irq = client->irq;
 	err = devm_mutex_init(&client->dev, &priv->lock);
 	if (err)
 		return err;

@@ -994,19 +997,19 @@ static int abx80x_probe(struct i2c_client *client)
 		return -EIO;
 	}
 
-	if (client->irq > 0) {
-		dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
-		err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+	if (priv->irq > 0) {
+		dev_info(&client->dev, "IRQ %d supplied\n", priv->irq);
+		err = devm_request_threaded_irq(&client->dev, priv->irq, NULL,
 						abx80x_handle_irq,
 						IRQF_SHARED | IRQF_ONESHOT,
 						"abx8xx",
 						client);
 		if (err) {
 			dev_err(&client->dev, "unable to request IRQ, alarms disabled\n");
-			client->irq = 0;
+			priv->irq = 0;
 		}
 	}
-	if (client->irq <= 0)
+	if (priv->irq <= 0)
 		clear_bit(RTC_FEATURE_ALARM, priv->rtc->features);
 
 	err = rtc_add_group(priv->rtc, &rtc_calib_attr_group);

762 lines not on this page · raw message

index 5d41882f3c70..ab88af43b4fa 100644
@@ -232,7 +232,7 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	unsigned char buf[8];
-	int err, flags;
+	int err;
 
 	if (tm->tm_year < 100)
 		return -EINVAL;

@@ -256,18 +256,11 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	}
 
 	/* Clear the OF bit of Oscillator Status Register */
-	err = regmap_read(priv->regmap, ABX8XX_REG_OSS, &flags);
+	err = regmap_update_bits(priv->regmap, ABX8XX_REG_OSS, ABX8XX_OSS_OF, 0);
 	if (err < 0)
-		return err;
-
-	err = regmap_write(priv->regmap, ABX8XX_REG_OSS,
-			   flags & ~ABX8XX_OSS_OF);
-	if (err < 0) {
 		dev_err(dev, "Unable to write oscillator status register\n");
-		return err;
-	}
 
-	return 0;
+	return err;
 }
 
 static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)

@@ -378,7 +371,6 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 {
 	struct abx80x_priv *priv = dev_get_drvdata(dev);
 	unsigned int flags = 0;
-	int retval;
 
 	if ((autocalibration != 0) && (autocalibration != 1024) &&
 	    (autocalibration != 512)) {

@@ -386,12 +378,6 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 		return -EINVAL;
 	}
 
-	guard(mutex)(&priv->lock);
-
-	retval = regmap_read(priv->regmap, ABX8XX_REG_OSC, &flags);
-	if (retval < 0)
-		return retval;
-
 	if (autocalibration == 0) {
 		flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024);
 	} else if (autocalibration == 1024) {

@@ -403,13 +389,15 @@ static int abx80x_rtc_set_autocalibration(struct device *dev,
 		flags |= (ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512);
 	}
 
+	guard(mutex)(&priv->lock);
+
 	/* Unlock write access to Oscillator Control Register */
 	if (abx80x_write_config_key(dev, ABX8XX_CFG_KEY_OSC) < 0)
 		return -EIO;
 
-	retval = regmap_write(priv->regmap, ABX8XX_REG_OSC, flags);
-
-	return retval;
+	return regmap_write_bits(priv->regmap, ABX8XX_REG_OSC,
+				 ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512,
+				 flags);
 }
 
 static int abx80x_rtc_get_autocalibration(struct device *dev)

@@ -473,7 +461,6 @@ static ssize_t oscillator_store(struct device *dev,
 {
 	struct abx80x_priv *priv = dev_get_drvdata(dev->parent);
 	int retval, rc_mode = 0;
-	unsigned int flags;
 
 	if (strncmp(buf, "rc", 2) == 0) {
 		rc_mode = 1;

@@ -486,24 +473,14 @@ static ssize_t oscillator_store(struct device *dev,
 
 	guard(mutex)(&priv->lock);
 
-	retval = regmap_read(priv->regmap, ABX8XX_REG_OSC, &flags);
-	if (retval < 0)
-		return retval;
-
-	if (rc_mode == 0)
-		flags &= ~(ABX8XX_OSC_OSEL);
-	else
-		flags |= (ABX8XX_OSC_OSEL);
-
 	/* Unlock write access on Oscillator Control register */
 	if (abx80x_write_config_key(dev->parent, ABX8XX_CFG_KEY_OSC) < 0)
 		return -EIO;
 
-	retval = regmap_write(priv->regmap, ABX8XX_REG_OSC, flags);
-	if (retval < 0) {
+	retval = regmap_write_bits(priv->regmap, ABX8XX_REG_OSC, ABX8XX_OSC_OSEL,
+				   rc_mode == 0 ? 0 : (ABX8XX_OSC_OSEL));
+	if (retval < 0)
 		dev_err(dev, "Failed to write Oscillator Control register\n");
-		return retval;
-	}
 
 	return retval ? retval : count;
 }

@@ -573,18 +550,11 @@ static int abx80x_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 
 	case RTC_VL_CLR:
 		scoped_guard(mutex, &priv->lock) {
-			err = regmap_read(priv->regmap, ABX8XX_REG_STATUS, &status);
-			if (err < 0)
-				return err;
-
-			status &= ~ABX8XX_STATUS_BLF;
-
-			err = regmap_write(priv->regmap, ABX8XX_REG_STATUS, status);
-			if (err < 0)
-				return err;
+			err = regmap_update_bits(priv->regmap, ABX8XX_REG_STATUS,
+						 ABX8XX_STATUS_BLF, 0);
 		}
 
-		return 0;
+		return err;
 
 	default:
 		return -ENOIOCTLCMD;

@@ -841,7 +811,6 @@ static int abx80x_probe(struct i2c_client *client)
 	struct device_node *np = client->dev.of_node;
 	struct abx80x_priv *priv;
 	int i, err, trickle_cfg = -EINVAL;
-	unsigned int data;
 	char buf[7];
 	unsigned int part = (uintptr_t)i2c_get_match_data(client);
 	unsigned int partnumber;

@@ -891,14 +860,9 @@ static int abx80x_probe(struct i2c_client *client)
 	dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
 		 partnumber, majrev, minrev, lot, wafer, uid);
 
-	err = regmap_read(regmap, ABX8XX_REG_CTRL1, &data);
-	if (err < 0) {
-		dev_err(&client->dev, "Unable to read control register\n");
-		return -EIO;
-	}
-
-	err = regmap_write(regmap, ABX8XX_REG_CTRL1,
-			   (data & ~(ABX8XX_CTRL_12_24 | ABX8XX_CTRL_ARST)) | ABX8XX_CTRL_WRITE);
+	err = regmap_update_bits(regmap, ABX8XX_REG_CTRL1,
+				 ABX8XX_CTRL_12_24 | ABX8XX_CTRL_ARST | ABX8XX_CTRL_WRITE,
+				 ABX8XX_CTRL_WRITE);
 	if (err < 0) {
 		dev_err(&client->dev, "Unable to write control register\n");
 		return -EIO;

@@ -912,30 +876,10 @@ static int abx80x_probe(struct i2c_client *client)
 		 * register is set. RV-1805-C3 datasheet indicates that
 		 * the bit should be cleared in section 11h - Control2.
 		 */
-		err = regmap_read(regmap, ABX8XX_REG_CTRL2, &data);
-		if (err < 0) {
-			dev_err(&client->dev,
-				"Unable to read control2 register\n");
-			return -EIO;
-		}
-
-		err = regmap_write(regmap, ABX8XX_REG_CTRL2,
-				   data & ~ABX8XX_CTRL2_RSVD);
-		if (err < 0) {
-			dev_err(&client->dev,
-				"Unable to write control2 register\n");
-			return -EIO;
-		}
-
-		/*
-		 * Avoid extra power leakage. The RV1805 uses smaller
-		 * 10pin package and the EXTI input is not present.
-		 * Disable it to avoid leakage.
-		 */
-		err = regmap_read(regmap, ABX8XX_REG_OUT_CTRL, &data);
+		err = regmap_update_bits(regmap, ABX8XX_REG_CTRL2,
+					 ABX8XX_CTRL2_RSVD, 0);
 		if (err < 0) {
-			dev_err(&client->dev,
-				"Unable to read output control register\n");
+			dev_err(&client->dev, "Unable to write control2 register\n");
 			return -EIO;
 		}
 

@@ -946,8 +890,14 @@ static int abx80x_probe(struct i2c_client *client)
 		if (abx80x_write_config_key(&client->dev, ABX8XX_CFG_KEY_MISC) < 0)
 			return -EIO;
 
-		err = regmap_write(regmap, ABX8XX_REG_OUT_CTRL,
-				   data | ABX8XX_OUT_CTRL_EXDS);
+		/*
+		 * Avoid extra power leakage. The RV1805 uses smaller
+		 * 10pin package and the EXTI input is not present.
+		 * Disable it to avoid leakage.
+		 */
+		err = regmap_write_bits(regmap, ABX8XX_REG_OUT_CTRL,
+					ABX8XX_OUT_CTRL_EXDS,
+					ABX8XX_OUT_CTRL_EXDS);
 		if (err < 0) {
 			dev_err(&client->dev,
 				"Unable to write output control register\n");

@@ -998,33 +948,18 @@ static int abx80x_probe(struct i2c_client *client)
 		return err;
 
 	/* Disable unused interrupts */
-	err = regmap_read(regmap, ABX8XX_REG_IRQ, &data);
-	if (err < 0) {
-		dev_err(&client->dev, "Unable to read irq register\n");
-		return -EIO;
-	}
-
-	err = regmap_write(regmap, ABX8XX_REG_IRQ,
-			   data & ~(ABX8XX_IRQ_EX1E |
-				    ABX8XX_IRQ_EX2E |
-				    ABX8XX_IRQ_TIE |
-				    ABX8XX_IRQ_BLIE));
-	if (err < 0) {
-		dev_err(&client->dev, "Unable to write irq register\n");
-		return -EIO;
-	}
-
-	err = regmap_read(regmap, ABX8XX_REG_OSC, &data);
+	err = regmap_update_bits(regmap, ABX8XX_REG_IRQ,
+				 ABX8XX_IRQ_EX1E | ABX8XX_IRQ_EX2E |
+				 ABX8XX_IRQ_TIE | ABX8XX_IRQ_BLIE, 0);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to read Oscillator Control register\n");
+		dev_err(&client->dev, "Unable to update irq register\n");
 		return -EIO;
 	}
 
-	err = regmap_write(regmap, ABX8XX_REG_OSC,
-			   data & ~(ABX8XX_OSC_ACIE |
-				    ABX8XX_OSC_OFIE));
+	err = regmap_update_bits(regmap, ABX8XX_REG_OSC,
+				 ABX8XX_OSC_ACIE | ABX8XX_OSC_OFIE, 0);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to write Oscillator Control register\n");
+		dev_err(&client->dev, "Unable to update Oscillator Control register\n");
 		return -EIO;
 	}
 

index ab88af43b4fa..08b22c067699 100644
@@ -781,73 +781,38 @@ static const struct regmap_access_table abx80x_write_table = {
 	.n_no_ranges = ARRAY_SIZE(abx80x_no_write_ranges),
 };
 
-static const struct regmap_config abx80x_regmap_config_i2c = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = ABX8XX_SRAM_BASE + ABX8XX_SRAM_WIN_SIZE - 1,
-
-	.rd_table = &abx80x_read_table,
-	.wr_table = &abx80x_write_table,
-};
-
-static const struct i2c_device_id abx80x_id[] = {
-	{ .name = "abx80x", .driver_data = ABX80X },
-	{ .name = "ab0801", .driver_data = AB0801 },
-	{ .name = "ab0803", .driver_data = AB0803 },
-	{ .name = "ab0804", .driver_data = AB0804 },
-	{ .name = "ab0805", .driver_data = AB0805 },
-	{ .name = "ab1801", .driver_data = AB1801 },
-	{ .name = "ab1803", .driver_data = AB1803 },
-	{ .name = "ab1804", .driver_data = AB1804 },
-	{ .name = "ab1805", .driver_data = AB1805 },
-	{ .name = "rv1805", .driver_data = RV1805 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, abx80x_id);
-
-static int abx80x_probe(struct i2c_client *client)
+static int abx80x_probe(struct device *dev, struct regmap *regmap, int irq,
+			struct device_node *np, unsigned int part)
 {
-	struct regmap *regmap;
-	struct device_node *np = client->dev.of_node;
 	struct abx80x_priv *priv;
 	int i, err, trickle_cfg = -EINVAL;
 	char buf[7];
-	unsigned int part = (uintptr_t)i2c_get_match_data(client);
 	unsigned int partnumber;
 	unsigned int majrev, minrev;
 	unsigned int lot;
 	unsigned int wafer;
 	unsigned int uid;
 
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-		return -ENODEV;
-
-	regmap = devm_regmap_init_i2c(client, &abx80x_regmap_config_i2c);
-	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Unable to allocate regmap\n");
-		return PTR_ERR(regmap);
-	}
-
-	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (priv == NULL)
 		return -ENOMEM;
 
-	priv->rtc = devm_rtc_allocate_device(&client->dev);
+	priv->rtc = devm_rtc_allocate_device(dev);
 	if (IS_ERR(priv->rtc))
 		return PTR_ERR(priv->rtc);
 
 	priv->rtc->ops = &abx80x_rtc_ops;
-	priv->irq = client->irq;
+	priv->irq = irq;
 	priv->regmap = regmap;
-	err = devm_mutex_init(&client->dev, &priv->lock);
+	err = devm_mutex_init(dev, &priv->lock);
 	if (err)
 		return err;
 
-	dev_set_drvdata(&client->dev, priv);
+	dev_set_drvdata(dev, priv);
 
 	err = regmap_bulk_read(regmap, ABX8XX_REG_ID0, buf, sizeof(buf));
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to read partnumber\n");
+		dev_err(dev, "Unable to read partnumber\n");
 		return -EIO;
 	}
 

@@ -857,14 +822,14 @@ static int abx80x_probe(struct i2c_client *client)
 	lot = ((buf[4] & 0x80) << 2) | ((buf[6] & 0x80) << 1) | buf[3];
 	uid = ((buf[4] & 0x7f) << 8) | buf[5];
 	wafer = (buf[6] & 0x7c) >> 2;
-	dev_info(&client->dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
+	dev_info(dev, "model %04x, revision %u.%u, lot %x, wafer %x, uid %x\n",
 		 partnumber, majrev, minrev, lot, wafer, uid);
 
 	err = regmap_update_bits(regmap, ABX8XX_REG_CTRL1,
 				 ABX8XX_CTRL_12_24 | ABX8XX_CTRL_ARST | ABX8XX_CTRL_WRITE,
 				 ABX8XX_CTRL_WRITE);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to write control register\n");
+		dev_err(dev, "Unable to write control register\n");
 		return -EIO;
 	}
 

@@ -879,7 +844,7 @@ static int abx80x_probe(struct i2c_client *client)
 		err = regmap_update_bits(regmap, ABX8XX_REG_CTRL2,
 					 ABX8XX_CTRL2_RSVD, 0);
 		if (err < 0) {
-			dev_err(&client->dev, "Unable to write control2 register\n");
+			dev_err(dev, "Unable to write control2 register\n");
 			return -EIO;
 		}
 

@@ -887,7 +852,7 @@ static int abx80x_probe(struct i2c_client *client)
 		 * Write the configuration key register to enable access to
 		 * the config2 register
 		 */
-		if (abx80x_write_config_key(&client->dev, ABX8XX_CFG_KEY_MISC) < 0)
+		if (abx80x_write_config_key(dev, ABX8XX_CFG_KEY_MISC) < 0)
 			return -EIO;
 
 		/*

@@ -899,7 +864,7 @@ static int abx80x_probe(struct i2c_client *client)
 					ABX8XX_OUT_CTRL_EXDS,
 					ABX8XX_OUT_CTRL_EXDS);
 		if (err < 0) {
-			dev_err(&client->dev,
+			dev_err(dev,
 				"Unable to write output control register\n");
 			return -EIO;
 		}

@@ -911,26 +876,24 @@ static int abx80x_probe(struct i2c_client *client)
 			if (partnumber == abx80x_caps[i].pn)
 				break;
 		if (abx80x_caps[i].pn == 0) {
-			dev_err(&client->dev, "Unknown part: %04x\n",
-				partnumber);
+			dev_err(dev, "Unknown part: %04x\n", partnumber);
 			return -EINVAL;
 		}
 		part = i;
 	}
 
 	if (partnumber != abx80x_caps[part].pn) {
-		dev_err(&client->dev, "partnumber mismatch %04x != %04x\n",
+		dev_err(dev, "partnumber mismatch %04x != %04x\n",
 			partnumber, abx80x_caps[part].pn);
 		return -EINVAL;
 	}
 
 	if (np && abx80x_caps[part].has_tc)
-		trickle_cfg = abx80x_dt_trickle_cfg(&client->dev);
+		trickle_cfg = abx80x_dt_trickle_cfg(dev);
 
 	if (trickle_cfg > 0) {
-		dev_info(&client->dev, "Enabling trickle charger: %02x\n",
-			 trickle_cfg);
-		abx80x_enable_trickle_charger(&client->dev, trickle_cfg);
+		dev_info(dev, "Enabling trickle charger: %02x\n", trickle_cfg);
+		abx80x_enable_trickle_charger(dev, trickle_cfg);
 	}
 
 	err = regmap_write(regmap, ABX8XX_REG_CD_TIMER_CTL, BIT(2));

@@ -938,7 +901,7 @@ static int abx80x_probe(struct i2c_client *client)
 		return err;
 
 	if (abx80x_caps[part].has_wdog) {
-		err = abx80x_setup_watchdog(&client->dev);
+		err = abx80x_setup_watchdog(dev);
 		if (err)
 			return err;
 	}

@@ -952,26 +915,26 @@ static int abx80x_probe(struct i2c_client *client)
 				 ABX8XX_IRQ_EX1E | ABX8XX_IRQ_EX2E |
 				 ABX8XX_IRQ_TIE | ABX8XX_IRQ_BLIE, 0);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to update irq register\n");
+		dev_err(dev, "Unable to update irq register\n");
 		return -EIO;
 	}
 
 	err = regmap_update_bits(regmap, ABX8XX_REG_OSC,
 				 ABX8XX_OSC_ACIE | ABX8XX_OSC_OFIE, 0);
 	if (err < 0) {
-		dev_err(&client->dev, "Unable to update Oscillator Control register\n");
+		dev_err(dev, "Unable to update Oscillator Control register\n");
 		return -EIO;
 	}
 
 	if (priv->irq > 0) {
-		dev_info(&client->dev, "IRQ %d supplied\n", priv->irq);
-		err = devm_request_threaded_irq(&client->dev, priv->irq, NULL,
+		dev_info(dev, "IRQ %d supplied\n", priv->irq);
+		err = devm_request_threaded_irq(dev, priv->irq, NULL,
 						abx80x_handle_irq,
 						IRQF_SHARED | IRQF_ONESHOT,
 						"abx8xx",
-						&client->dev);
+						dev);
 		if (err) {
-			dev_err(&client->dev, "unable to request IRQ, alarms disabled\n");
+			dev_err(dev, "unable to request IRQ, alarms disabled\n");
 			priv->irq = 0;
 		}
 	}

@@ -980,14 +943,39 @@ static int abx80x_probe(struct i2c_client *client)
 
 	err = rtc_add_group(priv->rtc, &rtc_calib_attr_group);
 	if (err) {
-		dev_err(&client->dev, "Failed to create sysfs group: %d\n",
-			err);
+		dev_err(dev, "Failed to create sysfs group: %d\n", err);
 		return err;
 	}
 
 	return devm_rtc_register_device(priv->rtc);
 }
 
+#if IS_ENABLED(CONFIG_I2C)
+
+static const struct regmap_config abx80x_regmap_config_i2c = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = ABX8XX_SRAM_BASE + ABX8XX_SRAM_WIN_SIZE - 1,
+
+	.rd_table = &abx80x_read_table,
+	.wr_table = &abx80x_write_table,
+};
+
+static const struct i2c_device_id abx80x_id[] = {
+	{ .name = "abx80x", .driver_data = ABX80X },
+	{ .name = "ab0801", .driver_data = AB0801 },
+	{ .name = "ab0803", .driver_data = AB0803 },
+	{ .name = "ab0804", .driver_data = AB0804 },
+	{ .name = "ab0805", .driver_data = AB0805 },
+	{ .name = "ab1801", .driver_data = AB1801 },
+	{ .name = "ab1803", .driver_data = AB1803 },
+	{ .name = "ab1804", .driver_data = AB1804 },
+	{ .name = "ab1805", .driver_data = AB1805 },
+	{ .name = "rv1805", .driver_data = RV1805 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, abx80x_id);
+
 #ifdef CONFIG_OF
 static const struct of_device_id abx80x_of_match[] = {
 	{

@@ -1035,16 +1023,67 @@ static const struct of_device_id abx80x_of_match[] = {
 MODULE_DEVICE_TABLE(of, abx80x_of_match);
 #endif
 
+static int abx80x_i2c_probe(struct i2c_client *client)
+{
+	unsigned int part = (uintptr_t)i2c_get_match_data(client);
+	struct regmap *regmap;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	regmap = devm_regmap_init_i2c(client, &abx80x_regmap_config_i2c);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Unable to allocate regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	return abx80x_probe(&client->dev, regmap, client->irq,
+			    client->dev.of_node, part);
+}
+
 static struct i2c_driver abx80x_driver = {
 	.driver		= {
 		.name	= "rtc-abx80x",
 		.of_match_table = of_match_ptr(abx80x_of_match),
 	},
-	.probe		= abx80x_probe,
+	.probe		= abx80x_i2c_probe,
 	.id_table	= abx80x_id,
 };
 
-module_i2c_driver(abx80x_driver);
+static int abx80x_register_driver(void)
+{
+	return i2c_add_driver(&abx80x_driver);
+}
+
+static void abx80x_unregister_driver(void)
+{
+	i2c_del_driver(&abx80x_driver);
+}
+
+#else
+
+static int abx80x_register_driver(void)
+{
+	return 0;
+}
+
+static void abx80x_unregister_driver(void)
+{
+}
+
+#endif /* IS_ENABLED(CONFIG_I2C) */
+
+static int __init abx80x_init(void)
+{
+	return abx80x_register_driver();
+}
+module_init(abx80x_init);
+
+static void __exit abx80x_exit(void)
+{
+	abx80x_unregister_driver();
+}
+module_exit(abx80x_exit);
 
 MODULE_AUTHOR("Philippe De Muyter <[email protected]>");
 MODULE_AUTHOR("Alexandre Belloni <[email protected]>");

146 lines not on this page · raw message