fs: nfsd: Fix buffer overflow in write_pool_threads()
Subsystems (2)
PATCH 1/1 fs: nfsd: Fix buffer overflow in write_pool_threads()
write_pool_threads() writes the number of threads in each pool into a caller-supplied 'almost PAGE_SIZE' buffer.
If there are enough pools to overflow the buffer the code continues writing beynd its end.
Fix the overflow check so that it actually works.
---
I'm pretty sure this is 'root only' code.
So you'd have to try very hard to actually get the overflow.
fs/nfsd/nfsctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
fs/nfsd/nfsctl.c +5 -5
@@ -483,8 +483,7 @@ static ssize_t write_pool_threads(struct file *file, char *buf, size_t size)* file, sorry. Report zero threads. */ mutex_unlock (&nfsd_mutex); -strcpy (buf,"0\n" ); -return strlen (buf); +return strscpy (buf,"0\n" ,SIMPLE_TRANSACTION_LIMIT ); } nthreads =kzalloc_objs (int, npools);
@@ -523,13 +522,14 @@ static ssize_t write_pool_threads(struct file *file, char *buf, size_t size) mesg = buf; size =SIMPLE_TRANSACTION_LIMIT ; -for (i =0 ; i < npools && size >0 ; i++) { -snprintf (mesg, size,"%d%c" , nthreads[i], (i == npools-1 ?'\n' :' ' )); - len =strlen (mesg); +for (i =0 ; i < npools; i++) { + len =scnprintf (mesg, size,"%d " , nthreads[i]); size -= len; mesg += len; } rv = mesg - buf; +if (rv !=SIMPLE_TRANSACTION_LIMIT -1 ) + msg[-1 ] ='\n' ; out_free:kfree (nthreads);mutex_unlock (&nfsd_mutex);
Signature · 1 line
2.39.5
Chuck Lever
maintainerQuoted 38 lines · David Laight
write_pool_threads()writes the number of threads in each pool into a caller-supplied 'almostPAGE_SIZE' buffer.
If there are enough pools to overflow the buffer the code continues writing beynd its end.Fix the overflow check so that it actually works.
Fixes eed2965af1bae "knfsd: allow admin to set nthreads per node"Signed-off-by David Laight <[email protected]>---
I'm pretty sure this is 'root only' code.
So you'd have to try very hard to actually get the overflow.fs/nfsd/nfsctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)fs/nfsd/nfsctl.c +1
-2@@ -483,8 +483,7 @@ static ssize_t write_pool_threads(struct file*file, char *buf, size_t size) * file, sorry. Report zero threads. */ mutex_unlock (&nfsd_mutex); -strcpy (buf,"0\n" ); -return strlen (buf); +return strscpy (buf,"0\n" ,SIMPLE_TRANSACTION_LIMIT ); }fs/nfsd/nfsctl.c +0
-1nthreads =kzalloc_objs (int, npools);@@ -523,13 +522,14 @@ static ssize_t write_pool_threads(struct file *file, char *buf, size_t size) mesg = buf; size =SIMPLE_TRANSACTION_LIMIT ; -for (i =0 ; i < npools && size >0 ; i++) {
fs/nfsd/nfsctl.c static ssize_t write_pool_threads(struct file · line 533
Quoted 10 lines
fs/nfsd/nfsctl.c +4
-2-snprintf (mesg, size,"%d%c" , nthreads[i], (i == npools-1 ?'\n' :' ' )); - len =strlen (mesg); +for (i =0 ; i < npools; i++) { + len =scnprintf (mesg, size,"%d " , nthreads[i]); size -= len; mesg += len; } rv = mesg - buf; +if (rv !=SIMPLE_TRANSACTION_LIMIT -1 ) + msg[-1 ] ='\n' ;
Did you mean "mesg[-1] = '\n';" here?
Quoted 5 lines
fs/nfsd/nfsctl.c +0
-0out_free:kfree (nthreads);
mutex_unlock(&nfsd_mutex);Signature · 1 line
2.39.5
Signature · 1 line
Chuck Lever
Quoted 36 lines · On Wed, 12 Aug 2026 16:19:22 -0400 "Chuck Lever" <[email protected]> wrote:
Quoted 35 lines · David Laight
write_pool_threads()writes the number of threads in each pool into a caller-supplied 'almostPAGE_SIZE' buffer.
If there are enough pools to overflow the buffer the code continues writing beynd its end.Fix the overflow check so that it actually works.
Fixes eed2965af1bae "knfsd: allow admin to set nthreads per node"Signed-off-by David Laight <[email protected]>---
I'm pretty sure this is 'root only' code.
So you'd have to try very hard to actually get the overflow.fs/nfsd/nfsctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)fs/nfsd/nfsctl.c +1
-2@@ -483,8 +483,7 @@ static ssize_t write_pool_threads(struct file*file, char *buf, size_t size) * file, sorry. Report zero threads. */ mutex_unlock (&nfsd_mutex); -strcpy (buf,"0\n" ); -return strlen (buf); +return strscpy (buf,"0\n" ,SIMPLE_TRANSACTION_LIMIT ); }fs/nfsd/nfsctl.c +0
-0nthreads =kzalloc_objs (int, npools);@@ -523,13 +522,14 @@ static ssize_t write_pool_threads(struct file *file, char *buf, size_t size)
Quoted 15 lines
fs/nfsd/nfsctl.c static ssize_t write_pool_threads(struct file *file, char *buf, size_t size) · line 532
Quoted 13 lines
fs/nfsd/nfsctl.c +4
-3mesg = buf; size =SIMPLE_TRANSACTION_LIMIT ; -for (i =0 ; i < npools && size >0 ; i++) { -snprintf (mesg, size,"%d%c" , nthreads[i], (i == npools-1 ?'\n' :' ' )); - len =strlen (mesg); +for (i =0 ; i < npools; i++) { + len =scnprintf (mesg, size,"%d " , nthreads[i]); size -= len; mesg += len; } rv = mesg - buf; +if (rv !=SIMPLE_TRANSACTION_LIMIT -1 ) + msg[-1 ] ='\n' ;Did you mean "mesg[-1] = '\n';" here?
Yes - and I thought I'd compiled it ...
I did decide not to worry about the missing '\n' when the output 'just fits'. After all you need over 1300 pools with 10 threads to get to 4k. I'd bet something else dies first.
David
(Oh I've replaced Linus's 20 year old email I copied from the commit with his current one (he acked it) and deleted the broken one from the author.)
Quoted 8 lines
Quoted 7 lines
fs/nfsd/nfsctl.c +0
-0out_free:kfree (nthreads);
mutex_unlock(&nfsd_mutex);Signature · 1 line
2.39.5
Chuck Lever
maintainerQuoted 60 lines · David Laight
Quoted 36 lines · On Wed, 12 Aug 2026 16:19:22 -0400 "Chuck Lever" <[email protected]> wrote:
Quoted 35 lines · David Laight
write_pool_threads()writes the number of threads in each pool into a caller-supplied 'almostPAGE_SIZE' buffer.
If there are enough pools to overflow the buffer the code continues writing beynd its end.Fix the overflow check so that it actually works.
Fixes eed2965af1bae "knfsd: allow admin to set nthreads per node"Signed-off-by David Laight <[email protected]>---
I'm pretty sure this is 'root only' code.
So you'd have to try very hard to actually get the overflow.fs/nfsd/nfsctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)fs/nfsd/nfsctl.c +1
-2@@ -483,8 +483,7 @@ static ssize_t write_pool_threads(struct file*file, char *buf, size_t size) * file, sorry. Report zero threads. */ mutex_unlock (&nfsd_mutex); -strcpy (buf,"0\n" ); -return strlen (buf); +return strscpy (buf,"0\n" ,SIMPLE_TRANSACTION_LIMIT ); }fs/nfsd/nfsctl.c +0
-0nthreads =kzalloc_objs (int, npools);@@ -523,13 +522,14 @@ static ssize_t write_pool_threads(struct file *file, char *buf, size_t size)Quoted 15 lines
fs/nfsd/nfsctl.c static ssize_t write_pool_threads(struct file *file, char *buf, size_t size) · line 532
Quoted 13 lines
fs/nfsd/nfsctl.c +4
-3mesg = buf; size =SIMPLE_TRANSACTION_LIMIT ; -for (i =0 ; i < npools && size >0 ; i++) { -snprintf (mesg, size,"%d%c" , nthreads[i], (i == npools-1 ?'\n' :' ' )); - len =strlen (mesg); +for (i =0 ; i < npools; i++) { + len =scnprintf (mesg, size,"%d " , nthreads[i]); size -= len; mesg += len; } rv = mesg - buf; +if (rv !=SIMPLE_TRANSACTION_LIMIT -1 ) + msg[-1 ] ='\n' ;Did you mean "mesg[-1] = '\n';" here?
Yes - and I thought I'd compiled it ...
I did decide not to worry about the missing '\n' when the output 'just fits'. After all you need over 1300 pools with 10 threads to get to 4k. I'd bet something else dies first.
Quoted 4 lines
David
(Oh I've replaced Linus's 20 year old email I copied from the commit with his current one (he acked it) and deleted the broken one from the author.)
I've convinced myself that the actual problem is the truncation. The buffer overflow cannot occur. I've posted a patch to address that.
Signature · 1 line
Chuck Lever
Quoted 61 lines · On Sun, 16 Aug 2026 13:43:58 -0400 "Chuck Lever" <[email protected]> wrote:
Quoted 60 lines · David Laight
Quoted 36 lines · On Wed, 12 Aug 2026 16:19:22 -0400 "Chuck Lever" <[email protected]> wrote:
Quoted 35 lines · David Laight
write_pool_threads()writes the number of threads in each pool into a caller-supplied 'almostPAGE_SIZE' buffer.
If there are enough pools to overflow the buffer the code continues writing beynd its end.Fix the overflow check so that it actually works.
Fixes eed2965af1bae "knfsd: allow admin to set nthreads per node"Signed-off-by David Laight <[email protected]>---
I'm pretty sure this is 'root only' code.
So you'd have to try very hard to actually get the overflow.fs/nfsd/nfsctl.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)fs/nfsd/nfsctl.c +1
-2@@ -483,8 +483,7 @@ static ssize_t write_pool_threads(struct file*file, char *buf, size_t size) * file, sorry. Report zero threads. */ mutex_unlock (&nfsd_mutex); -strcpy (buf,"0\n" ); -return strlen (buf); +return strscpy (buf,"0\n" ,SIMPLE_TRANSACTION_LIMIT ); }fs/nfsd/nfsctl.c +0
-0nthreads =kzalloc_objs (int, npools);@@ -523,13 +522,14 @@ static ssize_t write_pool_threads(struct file *file, char *buf, size_t size)Quoted 15 lines
fs/nfsd/nfsctl.c static ssize_t write_pool_threads(struct file *file, char *buf, size_t size) · line 532
Quoted 13 lines
fs/nfsd/nfsctl.c +4
-3mesg = buf; size =SIMPLE_TRANSACTION_LIMIT ; -for (i =0 ; i < npools && size >0 ; i++) { -snprintf (mesg, size,"%d%c" , nthreads[i], (i == npools-1 ?'\n' :' ' )); - len =strlen (mesg); +for (i =0 ; i < npools; i++) { + len =scnprintf (mesg, size,"%d " , nthreads[i]); size -= len; mesg += len; } rv = mesg - buf; +if (rv !=SIMPLE_TRANSACTION_LIMIT -1 ) + msg[-1 ] ='\n' ;Did you mean "mesg[-1] = '\n';" here?
Yes - and I thought I'd compiled it ...
I did decide not to worry about the missing '\n' when the output 'just fits'. After all you need over 1300 pools with 10 threads to get to 4k. I'd bet something else dies first.
Quoted 7 lines
Quoted 4 lines
David
(Oh I've replaced Linus's 20 year old email I copied from the commit with his current one (he acked it) and deleted the broken one from the author.)
I've convinced myself that the actual problem is the truncation. The buffer overflow cannot occur.
My analysis was:
size is size_t so unsigned.
So after snprintf() truncates the 'size -= len' is going to generate a big number, so the 'size > 0' check doesn't terminate the loop. Which would mean that the next iteration would write beyond the buffer. But I think there is a check in snprintf() for 'silly' lengths that may stop the overwrite.
That doesn't stop the length returned to the caller being longer that the buffer.
I didn't look what happens as the call site, the buffer will be copied back to user, if the user provided a long enough buffer that might read beyond the end of the page.
Of course this is all likely impossible for other reasons. (and root only).
David
Quoted 3 lines
I've posted a patch to address that.