arm64: dts: imx: Fix EEPROM address on Data Modul i.MX8M Plus eDM SBC
Subsystems (2)
PATCH 1/1 arm64: dts: imx: Fix EEPROM address on Data Modul i.MX8M Plus eDM SBC
The Embedded EEPROM address on Data Modul i.MX8M Plus eDM SBC is 0x51 on all boards starting with revision 902 and newer, update the EEPROM address to 0x51 to cover all production hardware.
Older board revisions had the EEPROM strapped to address 0x50 but the EEPROM was not populated on those boards. A subset of rev. 902 boards also do not have the EEPROM populated. Rev. 903 and newer boards have the EEPROM populated and strapped to address 0x51. Therefore, setting the EEPROM address to 0x51 unconditionally does not break any users.
---
Cc: "NXP i.MX U-Boot Team" <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: [email protected]
--- arch/arm/dts/imx8mp-data-modul-edm-sbc.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/dts/imx8mp-data-modul-edm-sbc.dts +2 -2
@@ -296,9 +296,9 @@ self-powered; }; - eeprom: eeprom@50 { + eeprom: eeprom@51 { compatible = "atmel,24c32"; - reg = <0x50>; + reg = <0x51>; pagesize = <32>; };
Signature · 1 line
2.53.0
Fabio Estevam
reviewerHi Marek,
Quoted 5 lines · Marek Vasut
The Embedded EEPROM address on Data Modul i.MX8M Plus eDM SBC is
0x51on all boards starting with revision 902 and newer, update the EEPROM address to0x51to cover all production hardware.
Quoted 7 lines
Older board revisions had the EEPROM strapped to address
0x50but the EEPROM was not populated on those boards. A subset of rev. 902 boards also do not have the EEPROM populated. Rev. 903 and newer boards have the EEPROM populated and strapped to address0x51. Therefore, setting the EEPROM address to0x51unconditionally does not break any users.Signed-off-by Marek Vasut <[email protected]>
Does this need to go to main, or can it go to next?
Also, any chance to convert this board to OF_UPSTREAM?
On 8/17/26 1:49 AM, Fabio Estevam wrote:
Hello Fabio,
Quoted 12 lines · Marek Vasut
Quoted 11 lines
The Embedded EEPROM address on Data Modul i.MX8M Plus eDM SBC is
0x51on all boards starting with revision 902 and newer, update the EEPROM address to0x51to cover all production hardware.Older board revisions had the EEPROM strapped to address
0x50but the EEPROM was not populated on those boards. A subset of rev. 902 boards also do not have the EEPROM populated. Rev. 903 and newer boards have the EEPROM populated and strapped to address0x51. Therefore, setting the EEPROM address to0x51unconditionally does not break any users.
Quoted 3 lines
Quoted 1 line
Signed-off-by Marek Vasut <[email protected]>Does this need to go to main, or can it go to next?
main would be nice, since this is a (long overdue) fix.
Quoted 1 line
Also, any chance to convert this board to
OF_UPSTREAM?
It is on my todo since Peng sent the RFC, along with a bunch of other imx boards, I simply didn't get around to doing it and testing the result, sorry.
Quoted 3 lines · Marek Vasut
Quoted 1 line
Does this need to go to main, or can it go to next?
main would be nice, since this is a (long overdue) fix.
Tom, at the moment I don't have any outstanding patches queued for main.
Please apply this one directly, thanks.
Quoted 11 lines · Fabio Estevam
Quoted 3 lines · Marek Vasut
Quoted 1 line
Does this need to go to main, or can it go to next?
main would be nice, since this is a (long overdue) fix.
Reviewed-by Fabio Estevam <[email protected]>Tom, at the moment I don't have any outstanding patches queued for main.
Please apply this one directly, thanks.
I have sent one more fix
[PATCH] arm64: dts: imx: Increase malloc area size on Data Modul i.MX8M eDM SBC
This is still not in main, so maybe you could pick both and do a PR ?
Thank you !
Fabio Estevam
reviewerHi Marek,
Quoted 6 lines · Marek Vasut
I have sent one more fix
[PATCH] arm64: dts: imx: Increase malloc area size on Data Modul i.MX8M eDM SBC
This is still not in main, so maybe you could pick both and do a PR ?
Yes, I'll pick both soon.
Patchwork is down at the moment, which does not help. I'll pick them up soon.
On 9/6/26 12:06 AM, Fabio Estevam wrote:
Hello Fabio,
Quoted 10 lines · Marek Vasut
Quoted 7 lines
I have sent one more fix
[PATCH] arm64: dts: imx: Increase malloc area size on Data Modul i.MX8M eDM SBC
This is still not in main, so maybe you could pick both and do a PR ?
Yes, I'll pick both soon.
Thank you !
Quoted 1 line
Patchwork is down at the moment, which does not help. I'll pick them up soon.
AI scraper bots ...