Skip to contentSkip to conversation

wifi: nl80211: document sta-info nested attribute

PATCH Superseded Hilal Rahmatullah 3 participants 7 messages Aug 16 – Oct 2

Subsystems (3)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 wifi: nl80211: document sta-info nested attribute

Add NL80211_ATTR_STA_INFO nested attributes definition, from the previous binary type.

---
changes in v2:
- Fix nested attribute name
- Add double quote for numeric enum member
changes in v3:
- add missing he-gi attribute on rate-info-attrs
- fix sta-info attributes order

---
 Documentation/netlink/specs/nl80211.yaml | 351 ++++++++++++++++++++++-
 1 file changed, 350 insertions(+), 1 deletion(-)
Documentation/netlink/specs/nl80211.yaml +350 -1
index 802097128bda..4ad391db4a76 100644
@@ -211,6 +211,70 @@ definitions:
       - ht20
       - ht40minus
       - ht40plus
+  -
+    name: eht-gi
+    type: enum
+    entries:
+      - 0-8
+      - 1-6
+      - 3-2
+  -
+    name: eht-ru-alloc
+    type: enum
+    entries:
+      - "26"
+      - "52"
+      - 52p26
+      - "106"
+      - 106p26
+      - "242"
+      - "484"
+      - 484p242
+      - "996"
+      - 996p484
+      - 996p484p242
+      - 2x996
+      - 2x996p484
+      - 3x996
+      - 3x996p484
+      - 4x996
+  -
+    name: he-gi
+    type: enum
+    entries:
+      - 0-8
+      - 1-6
+      - 3-2
+  -
+    name: he-ru-alloc
+    type: enum
+    entries:
+      - "26"
+      - "52"
+      - "106"
+      - "242"
+      - "484"
+      - "996"
+      - 2x996
+  -
+    name: mesh-power-mode
+    type: enum
+    entries:
+      - unknown
+      - active
+      - light-sleep
+      - deep-sleep
+  -
+    name: plink-state
+    type: enum
+    entries:
+      - listen
+      - opn-snt
+      - opn-rcvd
+      - cnf-rcvd
+      - estab
+      - holding
+      - blocked
   -
     name: sta-flag-update
     type: struct
@@ -297,7 +361,8 @@ attribute-sets:
         type: u32
       -
         name: sta-info
-        type: binary  # TODO: nest
+        type: nest
+        nested-attributes: sta-info-attrs
       -
         name: wiphy-bands
         type: nest
@@ -1601,6 +1666,102 @@ attribute-sets:
         name: nan
         type: nest
         nested-attributes: frame-type-attrs
+  -
+    name: rate-info-attrs
+    enum-name: nl80211-rate-info
+    name-prefix: nl80211-rate-info-
+    attributes:
+      -
+        name: bitrate
+        type: u16
+      -
+        name: mcs
+        type: u8
+      -
+        name: 40-mhz-width
+        type: flag
+      -
+        name: short-gi
+        type: flag
+      -
+        name: bitrate32
+        type: u32
+      -
+        name: vht-mcs
+        type: u8
+      -
+        name: vht-nss
+        type: u8
+      -
+        name: 80-mhz-width
+        type: flag
+      -
+        name: 80p80-mhz-width
+        type: unused
+      -
+        name: 160-mhz-width
+        type: flag
+      -
+        name: 10-mhz-width
+        type: flag
+      -
+        name: 5-mhz-width
+        type: flag
+      -
+        name: he-mcs
+        type: u8
+      -
+        name: he-nss
+        type: u8
+      -
+        name: he-gi
+        type: u8
+        enum: he-gi
+      -
+        name: he-dcm
+        type: u8
+      -
+        name: he-ru-alloc
+        type: u8
+        enum: he-ru-alloc
+      -
+        name: 320-mhz-width
+        type: flag
+      -
+        name: eht-mcs
+        type: u8
+      -
+        name: eht-nss
+        type: u8
+      -
+        name: eht-gi
+        type: u8
+        enum: eht-gi
+      -
+        name: eht-ru-alloc
+        type: u8
+        enum: eht-ru-alloc
+      -
+        name: s1g-mcs
+        type: u8
+      -
+        name: s1g-nss
+        type: u8
+      -
+        name: 1-mhz-width
+        type: flag
+      -
+        name: 2-mhz-width
+        type: flag
+      -
+        name: 4-mhz-width
+        type: flag
+      -
+        name: 8-mhz-width
+        type: flag
+      -
+        name: 16-mhz-width
+        type: flag
   -
     name: sar-attributes
     enum-name: nl80211-sar-attrs
@@ -1631,6 +1792,170 @@ attribute-sets:
       -
         name: end-freq
         type: u32
+  -
+    name: sta-bss-param-attrs
+    enum-name: nl80211-sta-bss-param
+    name-prefix: nl80211-sta-bss-param-
+    attributes:
+      -
+        name: cts-prot
+        type: flag
+      -
+        name: short-preamble
+        type: flag
+      -
+        name: short-slot-time
+        type: flag
+      -
+        name: dtim-period
+        type: u8
+      -
+        name: beacon-interval
+        type: u16
+  -
+    name: sta-info-attrs
+    enum-name: nl80211-sta-info
+    name-prefix: nl80211-sta-info-
+    attributes:
+      -
+        name: inactive-time
+        type: u32
+      -
+        name: rx-bytes
+        type: u32
+      -
+        name: tx-bytes
+        type: u32
+      -
+        name: llid
+        type: u16
+      -
+        name: plid
+        type: u16
+      -
+        name: plink-state
+        type: u8
+        enum: plink-state
+      -
+        name: signal
+        type: u8
+      -
+        name: tx-bitrate
+        type: nest
+        nested-attributes: rate-info-attrs
+      -
+        name: rx-packets
+        type: u32
+      -
+        name: tx-packets
+        type: u32
+      -
+        name: tx-retries
+        type: u32
+      -
+        name: tx-failed
+        type: u32
+      -
+        name: signal-avg
+        type: u8
+      -
+        name: rx-bitrate
+        type: nest
+        nested-attributes: rate-info-attrs
+      -
+        name: bss-param
+        type: nest
+        nested-attributes: sta-bss-param-attrs
+      -
+        name: connected-time
+        type: u32
+      -
+        name: sta-flags
+        type: binary
+        struct: sta-flag-update
+      -
+        name: beacon-loss
+        type: u32
+      -
+        name: t-offset
+        type: s64
+      -
+        name: local-pm
+        type: u32
+        enum: mesh-power-mode
+      -
+        name: peer-pm
+        type: u32
+        enum: mesh-power-mode
+      -
+        name: nonpeer-pm
+        type: u32
+        enum: mesh-power-mode
+      -
+        name: rx-bytes64
+        type: u64
+      -
+        name: tx-bytes64
+        type: u64
+      -
+        name: chain-signal
+        type: u8
+      -
+        name: chain-signal-avg
+        type: u8
+      -
+        name: expected-throughput
+        type: u32
+      -
+        name: rx-drop-misc
+        type: u64
+      -
+        name: beacon-rx
+        type: u64
+      -
+        name: beacon-signal-avg
+        type: u8
+      -
+        name: tid-stats
+        type: indexed-array
+        sub-type: nest
+        nested-attributes: tid-stats-attrs
+      -
+        name: rx-duration
+        type: u64
+      -
+        name: pad
+        type: binary
+      -
+        name: ack-signal
+        type: u8
+      -
+        name: ack-signal-avg
+        type: u8
+      -
+        name: rx-mpdus
+        type: u32
+      -
+        name: fcs-error-count
+        type: u32
+      -
+        name: connected-to-gate
+        type: u8
+      -
+        name: tx-duration
+        type: u64
+      -
+        name: airtime-weight
+        type: u16
+      -
+        name: airtime-link-metric
+        type: u32
+      -
+        name: assoc-at-boottime
+        type: u64
+      -
+        name: connected-to-as
+        type: u8
   -
     name: supported-iftypes
     enum-name: nl80211-iftype
@@ -1672,6 +1997,30 @@ attribute-sets:
       -
         name: nan
         type: flag
+  -
+    name: tid-stats-attrs
+    enum-name: nl80211-tid-stats
+    name-prefix: nl80211-tid-stats-
+    attributes:
+      -
+        name: rx-msdu
+        type: u64
+      -
+        name: tx-msdu
+        type: u64
+      -
+        name: tx-msdu-retries
+        type: u64
+      -
+        name: tx-msdu-failed
+        type: u64
+      -
+        name: pad
+        type: binary
+      -
+        name: txq-stats
+        type: nest
+        nested-attributes: txq-stats-attrs
   -
     name: txq-stats-attrs
     name-prefix: nl80211-txq-stats-
Signature · 1 line
2.53.0
maintainer
#1 lore raw
Quoted 12 lines · On Sun, 16 Aug 2026 17:12:15 +0700 Hilal Rahmatullah wrote:

Add NL80211_ATTR_STA_INFO nested attributes definition, from the previous binary type.

---
changes in v2:
- Fix nested attribute name
- Add double quote for numeric enum member
changes in v3:
- add missing he-gi attribute on rate-info-attrs
- fix sta-info attributes order

Quoted 2 lines
---
 Documentation/netlink/specs/nl80211.yaml | 351 ++++++++++++++++++++++-

Hi Johannes! Should we add this file to wireless in MAINTAINERS? Or do you prefer for us to handle the YAML stuff directly?

#2 lore raw
Quoted 6 lines · Jakub Kicinski
Quoted 3 lines
---
 Documentation/netlink/specs/nl80211.yaml | 351 ++++++++++++++++++++++-

Hi Johannes! Should we add this file to wireless in MAINTAINERS? Or do you prefer for us to handle the YAML stuff directly?

Not sure, we don't really seem to be using it for all I know, and so it's just been getting some random updates like this, I guess.

I think I tend to prefer the status quo, but I guess I could also just apply patches to it if you prefer.

johannes

#3 lore raw
Quoted 5 lines · Johannes Berg
Quoted 4 lines · Jakub Kicinski
Quoted 3 lines
---
 Documentation/netlink/specs/nl80211.yaml | 351 ++++++++++++++++++++++-
Quoted 8 lines
Quoted 2 lines

Hi Johannes! Should we add this file to wireless in MAINTAINERS? Or do you prefer for us to handle the YAML stuff directly?

Not sure, we don't really seem to be using it for all I know, and so it's just been getting some random updates like this, I guess.

I think I tend to prefer the status quo, but I guess I could also just apply patches to it if you prefer.

So that's what I said a month ago, but because Jouni prodded me about our inconsistent documentation today, I actually looked at converting *all* of nl80211.h and our hand-rolled policies to be generated.

It ... takes some work, and ends up being 12k (!) lines of yaml, vs. today's 7.2k of nl80211.h and ~1k policy in nl80211.c.

It also requires a bunch of changes to the tooling:

- kdoc comments for attribute-set enums
- exact-len-warn check
- validate-fn check support and creating their prototypes
- combining min-len/max-len for binary attributes
- strict-start-type support
- flag to generate the whole attrs without linking them from ops (otherwise we get even many many more lines of yaml)
- NLA_NESTED/indexed arrays support
- allow nesting the global policy into itself (yeah ... I want some of what we were smoking ;-) )
- allowing inheriting different members for kernel policy side
- drop nesting when subset overrides type ... not even sure how to explain this right now
- option to define only policy, not ops
- allow taking ops IDs from an enum, because our ops don't match the ynl ops too well
- enum-max-name for definitions to adjust naming

There's a license issue - we have ISC license on nl80211.h now, but Donald and Hilal picked GPL/syscall/BSD-3 for the yaml and of course that carries over to the generated .h file, not sure if that's an issue for downstream projects but might be with advertising clause? Could we change it if I'm adding >10k new lines from nl80211.h? :)

I can post it but ... is it worth it? Not even sure it would significantly simplify our lives, although the generated header file with documentation is much more regular in that it always has the type, etc. (which is what Jouni was asking about)

johannes

maintainer
#4 lore raw
Quoted 40 lines · On Fri, 02 Oct 2026 19:34:19 +0200 Johannes Berg wrote:
Quoted 1 line · Johannes Berg

On Mon, 2026-08-17 at 08:47 -0700, Jakub Kicinski wrote:

[...]

Quoted 9 lines
Quoted 3 lines

Hi Johannes! Should we add this file to wireless in MAINTAINERS? Or do you prefer for us to handle the YAML stuff directly?

Not sure, we don't really seem to be using it for all I know, and so it's just been getting some random updates like this, I guess.

I think I tend to prefer the status quo, but I guess I could also just apply patches to it if you prefer.

So that's what I said a month ago, but because Jouni prodded me about our inconsistent documentation today, I actually looked at converting *all* of nl80211.h and our hand-rolled policies to be generated.

It ... takes some work, and ends up being 12k (!) lines of yaml, vs. today's 7.2k of nl80211.h and ~1k policy in nl80211.c.

It also requires a bunch of changes to the tooling:

- kdoc comments for attribute-set enums
- exact-len-warn check
- validate-fn check support and creating their prototypes
- combining min-len/max-len for binary attributes
- strict-start-type support
- flag to generate the whole attrs without linking them from ops (otherwise we get even many many more lines of yaml)
- NLA_NESTED/indexed arrays support
- allow nesting the global policy into itself (yeah ... I want some of what we were smoking ;-) )
- allowing inheriting different members for kernel policy side
- drop nesting when subset overrides type ... not even sure how to explain this right now
- option to define only policy, not ops
- allow taking ops IDs from an enum, because our ops don't match the ynl ops too well
- enum-max-name for definitions to adjust naming

Quoted 2 lines

There's a license issue - we have ISC license on nl80211.h now, but Donald and Hilal picked GPL/syscall/BSD-3 for the yaml and of course

That license is required for all netlink specs, FWIW It's totally my fault if it's wrong, I just didn't want it to be _just_ GPL since that would propagate to use space code which we want to be permissive about. The spec is effectively a uAPI description it should be public domain in my non-layer mind.

Quoted 8 lines

that carries over to the generated .h file, not sure if that's an issue for downstream projects but might be with advertising clause? Could we change it if I'm adding >10k new lines from nl80211.h? :)

I can post it but ... is it worth it? Not even sure it would significantly simplify our lives, although the generated header file with documentation is much more regular in that it always has the type, etc. (which is what Jouni was asking about)

Well, I certainly don't care so my choice would be not to have to review the code gen changes (:

#5 lore raw
Quoted 9 lines · Jakub Kicinski
Quoted 3 lines

There's a license issue - we have ISC license on nl80211.h now, but Donald and Hilal picked GPL/syscall/BSD-3 for the yaml and of course

That license is required for all netlink specs, FWIW It's totally my fault if it's wrong, I just didn't want it to be _just_ GPL since that would propagate to use space code which we want to be permissive about. The spec is effectively a uAPI description it should be public domain in my non-layer mind.

Oh, sure. But BSD-3 isn't (advertising clause), and people copy at least the nl80211.h file around to other projects. And the syscall exception doesn't really talk about distributing that code. So presumably going from ISC to this would require people to update even their binary distribution's docs (where it's built in) ...

Quoted 11 lines
Quoted 8 lines

that carries over to the generated .h file, not sure if that's an issue for downstream projects but might be with advertising clause? Could we change it if I'm adding >10k new lines from nl80211.h? :)

I can post it but ... is it worth it? Not even sure it would significantly simplify our lives, although the generated header file with documentation is much more regular in that it always has the type, etc. (which is what Jouni was asking about)

Well, I certainly don't care so my choice would be not to have to review the code gen changes (:

Fair :)

I'm not really sure it gives _that_ much benefit ... I guess I'll mull it over and maybe run it by some wifi people.

Thanks :)

johannes

maintainer
#6 lore raw
In reply to Hilal Rahmatullah

This is an AI-generated review of your patch. The human sending this email has considered the AI review valid, or at least plausible.
---
wifi: nl80211: document sta-info nested attribute

This converts NL80211_ATTR_STA_INFO in the nl80211 YAML spec from an opaque binary blob into a real nest, and adds the sta-info-attrs, rate-info-attrs, sta-bss-param-attrs and tid-stats-attrs sets plus the supporting enum definitions. A few questions below about how some of the new entries line up with what net/wireless/nl80211.c actually puts on the wire.

Quoted 4 lines
Documentation/netlink/specs/nl80211.yaml +0 -0
index 802097128bdae..4ad391db4a76d 100644

[ ... ]

Quoted 10 lines
Documentation/netlink/specs/nl80211.yaml +2 -1
@@ -297,7 +361,8 @@ attribute-sets:
         type: u32
       -
         name: sta-info
-        type: binary  # TODO: nest
+        type: nest
+        nested-attributes: sta-info-attrs
       -
         name: wiphy-bands
         type: nest

[ ... ]

Quoted 9 lines
Documentation/netlink/specs/nl80211.yaml +5 -0
@@ -1601,6 +1666,102 @@ attribute-sets:
         name: nan
         type: nest
         nested-attributes: frame-type-attrs
+  -
+    name: rate-info-attrs
+    enum-name: nl80211-rate-info
+    name-prefix: nl80211-rate-info-
+    attributes:

[ ... ]

Documentation/netlink/specs/nl80211.yaml attribute-sets: · line 1764

Quoted 3 lines
Documentation/netlink/specs/nl80211.yaml +3 -0
+      -
+        name: 16-mhz-width
+        type: flag

[Severity: Medium]
The set stops at 16-mhz-width, which gets implicit value 29 and lines up one-for-one with the enum up to that point. But enum nl80211_rate_info in include/uapi/linux/nl80211.h in this same tree continues:

	NL80211_RATE_INFO_16_MHZ_WIDTH,
	NL80211_RATE_INFO_UHR_MCS,
	NL80211_RATE_INFO_UHR_ELR,
	NL80211_RATE_INFO_UHR_IM,

and nl80211_put_sta_rate() emits them inside the same nest:

	} else if (info->flags & RATE_INFO_FLAGS_UHR_MCS) {
		if (nla_put_u8(msg, NL80211_RATE_INFO_UHR_MCS, info->mcs))
	...
		if (info->flags & RATE_INFO_FLAGS_UHR_ELR &&
		    nla_put_flag(msg, NL80211_RATE_INFO_UHR_ELR))

With values 30, 31 and 32 missing from the spec, does a get-station or dump-station on UHR capable hardware abort in the decoder? In tools/net/ynl/pyynl/lib/ynl.py the lookup path is:

attr_spec = attr_space.attrs_by_val[attr.type]
except (KeyError, UnboundLocalError) as err:
if not self.process_unknown:
raise YnlException(f"Space '{space}' has no attribute "

so unless process_unknown is set the whole reply fails rather than returning the station data. Should uhr-mcs, uhr-elr and uhr-im be added here?

Quoted 3 lines
   -
     name: sar-attributes
     enum-name: nl80211-sar-attrs

[ ... ]

Quoted 4 lines
Documentation/netlink/specs/nl80211.yaml +0 -0
@@ -1631,6 +1792,170 @@ attribute-sets:
       -
         name: end-freq
         type: u32

[ ... ]

Quoted 5 lines
Documentation/netlink/specs/nl80211.yaml +5 -0
+  -
+    name: sta-info-attrs
+    enum-name: nl80211-sta-info
+    name-prefix: nl80211-sta-info-
+    attributes:

[ ... ]

Documentation/netlink/specs/nl80211.yaml attribute-sets: · line 1905

Quoted 12 lines
Documentation/netlink/specs/nl80211.yaml +12 -0
+      -
+        name: rx-bytes64
+        type: u64
+      -
+        name: tx-bytes64
+        type: u64
+      -
+        name: chain-signal
+        type: u8
+      -
+        name: chain-signal-avg
+        type: u8

[Severity: Medium]
Are these two really scalars on the wire? nl80211_send_station() routes both through nl80211_put_signal():

	if (sinfo->filled & BIT_ULL(NL80211_STA_INFO_CHAIN_SIGNAL)) {
		if (!nl80211_put_signal(msg, sinfo->chains, sinfo->chain_signal, NL80211_STA_INFO_CHAIN_SIGNAL))

and nl80211_put_signal() builds a nest keyed by chain index:

	attr = nla_nest_start_noflag(msg, id);
	...
		if (nla_put_u8(msg, i, signal[i]))

so the payload is at least nla_total_size(1), never one byte. The per-link fill path does the same thing with link_sinfo->chains, and include/uapi/linux/nl80211.h documents it as:

* @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
* Contains a nested array of signal strength attributes (u8, dBm)

With type: u8 the decoder takes the scalar path in tools/net/ynl/pyynl/lib/ynl.py:

def as_scalar(self, attr_type, byte_order=None):
format_ = self.get_format(attr_type, byte_order) return format_.unpack(self.raw)[0]

which has no length tolerance, so unpacking an eight byte nest as 'B' raises struct.error and the reply decode is aborted with "Error decoding 'chain-signal' from 'sta-info-attrs'". While NL80211_ATTR_STA_INFO was
type: binary the blob was never walked, so does making it a nest turn this into a live failure for every station report from hardware that sets sinfo->chains? Would an indexed array of u8 (sub-attribute type is the 0-based chain index) describe it correctly?

Quoted 13 lines
Documentation/netlink/specs/nl80211.yaml +13 -0
+      -
+        name: expected-throughput
+        type: u32
+      -
+        name: rx-drop-misc
+        type: u64
+      -
+        name: beacon-rx
+        type: u64
+      -
+        name: beacon-signal-avg
+        type: u8
+      -

Documentation/netlink/specs/nl80211.yaml attribute-sets: · line 1928

Quoted 10 lines
Documentation/netlink/specs/nl80211.yaml +10 -0
+        name: tid-stats
+        type: indexed-array
+        sub-type: nest
+        nested-attributes: tid-stats-attrs
+      -
+        name: rx-duration
+        type: u64
+      -
+        name: pad
+        type: binary

[Severity: Low]
This isn't a bug, but should this (and the pad entry added to tid-stats-attrs below) use type: pad instead of type: binary? NL80211_STA_INFO_PAD is only ever used as the padattr argument:

	    nla_put_u64_64bit(msg, NL80211_STA_INFO_ ## attr,		\
			      sinfo->memb, NL80211_STA_INFO_PAD))

and NL80211_TID_STATS_PAD is used the same way by PUT_TIDVAL_U64. The tooling special-cases the dedicated type in tools/net/ynl/pyynl/lib/ynl.py:

                if attr_spec["type"] == 'pad':
                    continue

so as binary the filler shows up as a decoded pad field and the generated documentation claims it carries binary content. Other in-tree specs (tc.yaml, rt-link.yaml, ethtool.yaml, nftables.yaml) use type: pad for these. Note the existing NL80211_ATTR_PAD entry in this file already uses
type: binary, so this matches an existing wart in the family rather than introducing a functional break.

Documentation/netlink/specs/nl80211.yaml attribute-sets: · line 1934

Quoted 6 lines
Documentation/netlink/specs/nl80211.yaml +6 -0
+      -
+        name: ack-signal
+        type: u8
+      -
+        name: ack-signal-avg
+        type: u8

[Severity: Medium]
Should ack-signal-avg be s8? The emitter uses the signed helper:

		PUT_SINFO(ACK_SIGNAL, ack_signal, u8);
		PUT_SINFO(ACK_SIGNAL_AVG, avg_ack_signal, s8);

which expands to nla_put_s8(), the per-link path does PUT_LINK_SINFO(ACK_SIGNAL_AVG, avg_ack_signal, s8), struct station_info declares avg_ack_signal as s8, and the uapi header says:

* @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm)

The payload is one byte either way, so there is no parse error, just a value reported as 214 instead of -42. s8 is accepted by the schema (the attr-type enum in Documentation/netlink/genetlink-legacy.yaml lists it).

Related, and weaker: signal, signal-avg, ack-signal and beacon-signal-avg are put with nla_put_u8() so u8 matches the emitter literally, but the underlying station_info members are s8 dBm values, so spec-driven decoders will print them as large positive numbers. Is that intended here?

Quoted 3 lines
Documentation/netlink/specs/nl80211.yaml +3 -0
+      -
+        name: rx-mpdus
+        type: u32

[ ... ]

Quoted 9 lines
Documentation/netlink/specs/nl80211.yaml +5 -0
@@ -1672,6 +1997,30 @@ attribute-sets:
       -
         name: nan
         type: flag
+  -
+    name: tid-stats-attrs
+    enum-name: nl80211-tid-stats
+    name-prefix: nl80211-tid-stats-
+    attributes:

[ ... ]

Documentation/netlink/specs/nl80211.yaml attribute-sets: · line 2026

Quoted 10 lines
Documentation/netlink/specs/nl80211.yaml +7 -0
+      -
+        name: pad
+        type: binary
+      -
+        name: txq-stats
+        type: nest
+        nested-attributes: txq-stats-attrs
   -
     name: txq-stats-attrs
     name-prefix: nl80211-txq-stats-

Cross-instance finding from sashiko-gemini (9bc2ddddefa645796d23dda3f200d5d56cc1ca9a67d79f78de96c69e6ca35525):
[Severity: High]
The newly added enums (eht-gi, he-gi, eht-ru-alloc, he-ru-alloc, mesh-power-mode, plink-state) lack the name-prefix property, causing YNL to emit incorrect C constants.

Signature · 1 line
pw-bot: cr