Skip to contentSkip to conversation

drm/amdgpu: Replace deprecated strcpy with strscpy

PATCH Applied Amin Gattout 4 participants 8 messages Aug 18 – Aug 24

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/amdgpu: Replace deprecated strcpy with strscpy

strcpy() has been deprecated because it performs no bounds checking on the destination buffer, which can lead to buffer overflows. Replace it with the safer strscpy(). No functional changes.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +3 -3
index cc6d1a4e4c3a..1caa393c44d5 100644
@@ -97,7 +97,7 @@ int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev)
 		return err;
 	}
 
-	strcpy(ras->ras_block.ras_comm.name, "mca.mp0");
+	strscpy(ras->ras_block.ras_comm.name, "mca.mp0");
 	ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
 	ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP0;
 	ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -122,7 +122,7 @@ int amdgpu_mca_mp1_ras_sw_init(struct amdgpu_device *adev)
 		return err;
 	}
 
-	strcpy(ras->ras_block.ras_comm.name, "mca.mp1");
+	strscpy(ras->ras_block.ras_comm.name, "mca.mp1");
 	ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
 	ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP1;
 	ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -147,7 +147,7 @@ int amdgpu_mca_mpio_ras_sw_init(struct amdgpu_device *adev)
 		return err;
 	}
 
-	strcpy(ras->ras_block.ras_comm.name, "mca.mpio");
+	strscpy(ras->ras_block.ras_comm.name, "mca.mpio");
 	ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
 	ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MPIO;
 	ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;

---
base-commit: 0f23d56f17fdfc7db69d51f64c8b91bbab947aa9
change-id: 20260818-amdgpu-strcpy-0e92d18299c6

Best regards,

Signature · 1 line
Amin Gattout <[email protected]>
Applied
#1 lore raw

Applied. Thanks!

Quoted 50 lines · Amin Gattout

strcpy() has been deprecated because it performs no bounds checking on the destination buffer, which can lead to buffer overflows. Replace it with the safer strscpy(). No functional changes.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +3 -4
index cc6d1a4e4c3a..1caa393c44d5 100644
@@ -97,7 +97,7 @@ int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp0");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp0");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP0;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -122,7 +122,7 @@ int amdgpu_mca_mp1_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp1");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp1");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP1;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -147,7 +147,7 @@ int amdgpu_mca_mpio_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mpio");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mpio");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MPIO;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
 
---

base-commit: 0f23d56f17fdfc7db69d51f64c8b91bbab947aa9
change-id: 20260818-amdgpu-strcpy-0e92d18299c6

Best regards,
--
Amin Gattout <[email protected]>

#2 lore raw
Quoted 21 lines · On Tue, 18 Aug 2026 09:01:43 -0400 Alex Deucher <[email protected]> wrote:

Applied. Thanks!

Quoted 18 lines · Amin Gattout

strcpy() has been deprecated because it performs no bounds checking on the destination buffer, which can lead to buffer overflows. Replace it with the safer strscpy(). No functional changes.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +0 -0
index cc6d1a4e4c3a..1caa393c44d5 100644
@@ -97,7 +97,7 @@ int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
Quoted 2 lines

drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev) · line 100

Quoted 2 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +1 -1
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp0");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp0");

I missed this being proposed.
Both strcpy() and strscpy() get converted to the same memcpy() (which might itself get converted to writing a 64bit constant).

But if the string were too long strcpy() would generate a compile error whereas strscpy() just trunctates the string.

Which one is better?

David

Quoted 31 lines
Quoted 30 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +2 -3
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP0;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -122,7 +122,7 @@ int amdgpu_mca_mp1_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp1");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp1");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP1;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -147,7 +147,7 @@ int amdgpu_mca_mpio_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mpio");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mpio");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MPIO;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
 
---

base-commit: 0f23d56f17fdfc7db69d51f64c8b91bbab947aa9
change-id: 20260818-amdgpu-strcpy-0e92d18299c6

Best regards,
--
Amin Gattout <[email protected]>

#3 lore raw
Quoted 32 lines · David Laight
Quoted 21 lines · On Tue, 18 Aug 2026 09:01:43 -0400 Alex Deucher <[email protected]> wrote:

Applied. Thanks!

Quoted 18 lines · Amin Gattout

strcpy() has been deprecated because it performs no bounds checking on the destination buffer, which can lead to buffer overflows. Replace it with the safer strscpy(). No functional changes.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +0 -0
index cc6d1a4e4c3a..1caa393c44d5 100644
@@ -97,7 +97,7 @@ int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
Quoted 2 lines

drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev) · line 100

Quoted 2 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +1 -1
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp0");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp0");

I missed this being proposed.
Both strcpy() and strscpy() get converted to the same memcpy() (which might itself get converted to writing a 64bit constant).

Quoted 4 lines

But if the string were too long strcpy() would generate a compile error whereas strscpy() just trunctates the string.

Which one is better?

I don't know. I can go either way on this.

Alex

Quoted 35 lines

David

Quoted 31 lines
Quoted 30 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +2 -3
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP0;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -122,7 +122,7 @@ int amdgpu_mca_mp1_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp1");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp1");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP1;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -147,7 +147,7 @@ int amdgpu_mca_mpio_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mpio");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mpio");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MPIO;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
 
---

base-commit: 0f23d56f17fdfc7db69d51f64c8b91bbab947aa9
change-id: 20260818-amdgpu-strcpy-0e92d18299c6

Best regards,
--
Amin Gattout <[email protected]>

author
#4 lore raw

You raise a fair point about the compile-time truncation check. My reasoning follows the kernel's own deprecation guidance, which explicitly lists strcpy() as deprecated and names strscpy() as the safe replacement:

https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy

Regards.
Amin.

Quoted 80 lines · Alex Deucher
Quoted 32 lines · David Laight
Quoted 21 lines · On Tue, 18 Aug 2026 09:01:43 -0400 Alex Deucher <[email protected]> wrote:

Applied. Thanks!

Quoted 18 lines · Amin Gattout

strcpy() has been deprecated because it performs no bounds checking on the destination buffer, which can lead to buffer overflows. Replace it with the safer strscpy(). No functional changes.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +0 -0
index cc6d1a4e4c3a..1caa393c44d5 100644
@@ -97,7 +97,7 @@ int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
Quoted 2 lines

drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev) · line 100

Quoted 2 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +1 -1
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp0");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp0");

I missed this being proposed.
Both strcpy() and strscpy() get converted to the same memcpy() (which might itself get converted to writing a 64bit constant).

Quoted 4 lines

But if the string were too long strcpy() would generate a compile error whereas strscpy() just trunctates the string.

Which one is better?

I don't know. I can go either way on this.

Alex

Quoted 35 lines

David

Quoted 31 lines
Quoted 30 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +2 -3
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP0;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -122,7 +122,7 @@ int amdgpu_mca_mp1_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp1");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp1");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP1;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -147,7 +147,7 @@ int amdgpu_mca_mpio_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mpio");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mpio");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MPIO;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
 
---

base-commit: 0f23d56f17fdfc7db69d51f64c8b91bbab947aa9
change-id: 20260818-amdgpu-strcpy-0e92d18299c6

Best regards,
--
Amin Gattout <[email protected]>

#5 lore raw
Quoted 7 lines · Amin

You raise a fair point about the compile-time truncation check. My reasoning follows the kernel's own deprecation guidance, which explicitly lists strcpy() as deprecated and names strscpy() as the safe replacement:

https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy

RIght. My thinking was that strscpy() would be preferred to avoid static checkers from complaining about strcpy().

Alex

Quoted 85 lines

Regards.
Amin.

Quoted 80 lines · Alex Deucher
Quoted 32 lines · David Laight
Quoted 21 lines · On Tue, 18 Aug 2026 09:01:43 -0400 Alex Deucher <[email protected]> wrote:

Applied. Thanks!

Quoted 18 lines · Amin Gattout

strcpy() has been deprecated because it performs no bounds checking on the destination buffer, which can lead to buffer overflows. Replace it with the safer strscpy(). No functional changes.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +0 -0
index cc6d1a4e4c3a..1caa393c44d5 100644
@@ -97,7 +97,7 @@ int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
Quoted 2 lines

drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev) · line 100

Quoted 2 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +1 -1
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp0");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp0");

I missed this being proposed.
Both strcpy() and strscpy() get converted to the same memcpy() (which might itself get converted to writing a 64bit constant).

Quoted 4 lines

But if the string were too long strcpy() would generate a compile error whereas strscpy() just trunctates the string.

Which one is better?

I don't know. I can go either way on this.

Alex

Quoted 35 lines

David

Quoted 31 lines
Quoted 30 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +2 -3
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP0;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -122,7 +122,7 @@ int amdgpu_mca_mp1_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp1");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp1");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP1;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -147,7 +147,7 @@ int amdgpu_mca_mpio_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mpio");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mpio");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MPIO;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
 
---

base-commit: 0f23d56f17fdfc7db69d51f64c8b91bbab947aa9
change-id: 20260818-amdgpu-strcpy-0e92d18299c6

Best regards,
--
Amin Gattout <[email protected]>

#6 lore raw
Quoted 11 lines · On Tue, 18 Aug 2026 13:56:06 -0400 Alex Deucher <[email protected]> wrote:
Quoted 7 lines · Amin

You raise a fair point about the compile-time truncation check. My reasoning follows the kernel's own deprecation guidance, which explicitly lists strcpy() as deprecated and names strscpy() as the safe replacement:

https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy

RIght. My thinking was that strscpy() would be preferred to avoid static checkers from complaining about strcpy().

Personally I think the guidance (and checkpatch) should be changed. It is pretty easy to change the header files to only allow safe strcpy().
If nothing else that reduces pointless churn that just makes more work for the maintainers.

There are plenty of strcpy() and strlcat() calls that are 'not obviously correctly bounded' (and probably some strscpy() ones as well) which are better targets for patches than the ones that are trivially valid.

David

Quoted 2 lines

Alex

maintainer
#7 lore raw
In reply to Amin Gattout
Quoted 16 lines · Amin Gattout

[Sie erhalten nicht häufig E-Mails von [email protected]. Weitere Informationen, warum dies wichtig ist, finden Sie unter https://aka.ms/LearnAboutSenderIdentification ]

strcpy() has been deprecated because it performs no bounds checking on the destination buffer, which can lead to buffer overflows. Replace it with the safer strscpy(). No functional changes.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +0 -0
index cc6d1a4e4c3a..1caa393c44d5 100644

drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev) · line 100

Quoted 5 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +1 -1
@@ -97,7 +97,7 @@ int amdgpu_mca_mp0_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp0");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp0");

Well taking a step back. Why do we use strcpy() here in the first place?

As far as I can see ras->ras_block.ras_comm.name could just we a "const char *", doesn't it?

Regards,
Christian.

Quoted 30 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_mca.c +2 -3
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP0;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -122,7 +122,7 @@ int amdgpu_mca_mp1_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mp1");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mp1");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MP1;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
@@ -147,7 +147,7 @@ int amdgpu_mca_mpio_ras_sw_init(struct amdgpu_device *adev)
                return err;
        }
 
-       strcpy(ras->ras_block.ras_comm.name, "mca.mpio");
+       strscpy(ras->ras_block.ras_comm.name, "mca.mpio");
        ras->ras_block.ras_comm.block = AMDGPU_RAS_BLOCK__MCA;
        ras->ras_block.ras_comm.sub_block_index = AMDGPU_RAS_MCA_BLOCK__MPIO;
        ras->ras_block.ras_comm.type = AMDGPU_RAS_ERROR__MULTI_UNCORRECTABLE;
 
---

base-commit: 0f23d56f17fdfc7db69d51f64c8b91bbab947aa9
change-id: 20260818-amdgpu-strcpy-0e92d18299c6

Best regards,
--
Amin Gattout <[email protected]>