Extend qemu CPACF support
Subsystems (3)
v15 cover Extend qemu CPACF support
This patch series extends the s390 qemu CPACF support to be able to run a subset of the CPACF instruction cross platform. There have been requests on the kernel crypto mailing list about a way to test s390 specific crypto implementations. For example a way to test s390 CPACF exploitation code like the s390_aes.ko kernel module.
So here now is a set of patches verified on x86 and s390 which over (slow but working) support for a subset of the subfunctions of some of the CPACF instructions.
Test: There are some very basic tests included with this patch series suitable for some CI run. Better test coverage can be done by running a full blown Linux and use for example the in-kernel crypto modules. The 'usual' in-kernel crpyto modules will be automatically loaded which run a bunch of test cases. So there is now support for these kernel modules:
* sha256_s390x (autoloaded, sha256)
* sha512_s390x (autoloaded, sha512)
* aes_s390x (autoloaded, clear key aes ecb, cbc, ctr, xts)
* pkey_pckmo (autoloaded, derive AES protected key from clear key)
* paes_s390x (not autoloaded, protected key aes ecb, cbc, ctr, xts) All these modules run selftests if configured by the kernel (which is enabled by default). Failures are reported via syslog. Additionally the aes testcases from libica can be run either inside such an qemu environment or with a static build executed with the qemu tcg application qemu-s390x --cpu max <static-build-libica-test>.
Changelog:
v1: Initial version with
- Related code restructured
- Support KIMD SHA512 and thus SHA256
- Support KMC AES-128, AES-192 and AES-256 and thus have basic AES support (ECB mode) enabled.
- Support PCC Compute-XTS-Parameter-AES-128 and Compute-XTS-Parameter-AES-256 but only for block sequence number
0. This is a requirement for the next step:
- Support KM XTS-AES-128 and KM XTS-AES-256. Together with the minimal PCC support this enables AES-XTS CPACF acceleration.
v2: - Basic PCKMO support to be able to 'derive' an AES protected key
from clear key. See header details.
- Support protected key AES-ECB.
- Support protected key AES-CBC.
- Minimal protected key AES-XTS support for CPACF PCC.
- Support protected key AES-XTS.
- Support AES-CTR.
- Support protected key AES-CTR.
v3: - Reordered patches as suggested by Finn.
- One small bug fix in CPACF_aes.c related to address translation.
v4: - Rename of the parameters based on feedback from Janosch to
make clear these are registers or ptrs to registers. Added Tested by from Holger. Fixed typo "face" -> "fake".
v5: - Add documentation file docs/system/s390x/cpacf.rst which
describes the state of the CPACF instructions and which functions are covered when this series is applied. First version sent to public mailing list qemu-s390x.
v6: - Rebase/rework to build on current qemu head.
- Add docs/system/s390x/cpacf.rst to target-s390x.rst
- New file crypto/aes-helpers.c with some simple functions to support AES modes CBC, CTR and XTS.
- Slight rewrite of the s390x CPACF implementations to use these generic AES mode implementations.
v7: - Update on docs/system/s390x/cpacf.rst to mention
the zArchicteture Principles of Operation document which describes all these CPACF instructions.
v8: - Add a fix which deals with incorrect address handling
in the sha512 implementation related to fetch and push data from/to memory.
- Slight rework around the capcf function implementation and exception generation.
- Added some more details to the new cpacf.rst file.
- Fixed some typos and added some suggestions from Finn.
- Fixed cc handling on return of PCKMO (must not update cc).
Missing: simple test cases to verify that the implemented and not implemented cpacf functions and subfunctions work as expected. But see the statement about tests at the header.
v9: - Add simple tests for all the implemented CPACF instructions but
pckmo (which is a privileged instruction).
- Reworked the Fix for wrong address to call the wrap function inline; rephrased commit header.
- Improve the header file cpacf.h to hold defines for all the cpacf instruction functions and use them in the code.
- one new commit comprising the base protected key support with exposing the xor pattern and wkvp and en/decrypt key functions via cpacf.h. So the testcases can use this header file.
- one new commit which reworks the fetch memory and store memory from and to guest (suggested by Ilya Leoshkevich).
v10: - Fixed v9 patch 3 (cpacf_sha512.c was missing)
Please note that patch #10 "target/s390x: Base support for cpacf protected keys" produces a build warning ("unused function"). As by default the qemu build has warnings=errors enabled, this one patch does not build on it's own. If this is not acceptable, the hunk introducing the two functions may be moved to the next commit; another solution would be to merge with patch #11.
v11: Fixed nearly all checkpatch findings - only the warnings about
Maintainers may need update is still there.
v12: - Very first patch is integrated in master and thus removed from
this series.
- New header file include/crypto/aes-headers.h as suggested by Daniel. Moved the patch which introduces the aes helpers before the actual AES cpacf implementations and reworked all the code to use these helpers.
- Merged together "Base support for cpacf protected keys" and "Support pckmo encrypt AES subfunctions" to fix the broken build caused by unused functions.
- Merged the changes from patch "Improve fetch and store mem from and to guest" directly into the code where it is introduced.
v13: - reworked the helper functions to copy memory from and to
guest. These are now inline functions located in target/s390x/tcg/crypto_helper.h and have been renamed and extended for u32 and u64 as well. Also the both sha implementations have been reworked to use these helper functions. See patch #4 for details.
- fixed the wrong list of parameters docu in patch #5
- added some Reviewed-by tags.
- reworked the testcases to run (more or less) on real s390 hardware. However this does not and can not work with protected keys.
- rebased to current master head.
v14: - fixed one wrong constant in target/s390x/tcg/cpacf.h
- added 1 patch (patch #1) which fixes the missing privileged flag with the PCKMO instruction.
- added a simple testcase for the PCKMO instruction (see tests/s390x/tcg/cpacf-pckmo.c for details).
v15: - rebased to current master
- new patch reworking the addressing mode check in the both sha256 and sha512 implementations. Also added early bail out.
- In a similar way rework the checking for addressing mode in cpacf_aes.c (comes in with each algo implementation).
- bail out early on length zero for the cpacf aes algs.
- As suggested by Ilya splitted the cpacf.h into two header files cpacf-arch.h and cpacf.h.
Harald Freudenberger (20):
target/s390x: Fix missing privileged flag at PCKMO instruction target/s390x: Rework s390 cpacf implementations target/s390x: Move cpacf sha512 code into a new file target/s390x: Support cpacf sha256
target/s390x: Add helper functions for copy memory to and from guest target/s390x: Adjust addressing mode checks for sha512 and sha256
crypto: Add aes-helpers file to support some AES modes target/s390x: Support AES ECB for cpacf km instruction target/s390x: Support AES CBC for cpacf kmc instruction target/s390x: Support AES CTR for cpacf kmctr instruction target/s390x: Minimal AES XTS support for cpacf pcc instruction target/s390x: Support AES XTS for cpacf km instruction target/s390x: Base support for cpacf protected keys and pckmo target/s390x: Support protected key AES ECB for cpacf km instruction target/s390x: Support protected key AES CBC for cpacf kmc instruction target/s390x: Support protected key AES CTR for cpacf kmctr
instruction
target/s390x: Minimal protected key AES XTS support for cpacf pcc
instruction
target/s390x: Support protected key AES XTS for cpacf km instruction docs/s390: Document CPACF instructions support tests/tcg/s390x: Add tests for CPACF instructions
crypto/aes-helpers.c | 106 ++++ crypto/meson.build | 1 + docs/system/s390x/cpacf.rst | 146 +++++ docs/system/target-s390x.rst | 1 + include/crypto/aes-helpers.h | 109 ++++ target/s390x/gen-features.c | 31 + target/s390x/tcg/cpacf-arch.h | 251 ++++++++ target/s390x/tcg/cpacf.h | 63 ++ target/s390x/tcg/cpacf_aes.c | 988 +++++++++++++++++++++++++++++++ target/s390x/tcg/cpacf_sha256.c | 197 ++++++ target/s390x/tcg/cpacf_sha512.c | 211 +++++++ target/s390x/tcg/crypto_helper.c | 445 +++++++------- target/s390x/tcg/crypto_helper.h | 100 ++++ target/s390x/tcg/insn-data.h.inc | 3 +- target/s390x/tcg/meson.build | 3 + target/s390x/tcg/translate.c | 11 +- tests/tcg/s390x/Makefile.target | 10 + tests/tcg/s390x/cpacf-kdsa.c | 58 ++ tests/tcg/s390x/cpacf-kimd.c | 166 ++++++ tests/tcg/s390x/cpacf-klmd.c | 206 +++++++ tests/tcg/s390x/cpacf-km.c | 590 ++++++++++++++++++ tests/tcg/s390x/cpacf-kmac.c | 58 ++ tests/tcg/s390x/cpacf-kmc.c | 351 +++++++++++ tests/tcg/s390x/cpacf-kmctr.c | 360 +++++++++++ tests/tcg/s390x/cpacf-pcc.c | 245 ++++++++ tests/tcg/s390x/cpacf-pckmo.c | 45 ++ tests/tcg/s390x/cpacf-prno.c | 131 ++++ tests/tcg/s390x/cpacf.h | 570 ++++++++++++++++++ 28 files changed, 5231 insertions(+), 225 deletions(-) create mode 100644 crypto/aes-helpers.c create mode 100644 docs/system/s390x/cpacf.rst create mode 100644 include/crypto/aes-helpers.h create mode 100644 target/s390x/tcg/cpacf-arch.h create mode 100644 target/s390x/tcg/cpacf.h create mode 100644 target/s390x/tcg/cpacf_aes.c create mode 100644 target/s390x/tcg/cpacf_sha256.c create mode 100644 target/s390x/tcg/cpacf_sha512.c create mode 100644 target/s390x/tcg/crypto_helper.h create mode 100644 tests/tcg/s390x/cpacf-kdsa.c create mode 100644 tests/tcg/s390x/cpacf-kimd.c create mode 100644 tests/tcg/s390x/cpacf-klmd.c create mode 100644 tests/tcg/s390x/cpacf-km.c create mode 100644 tests/tcg/s390x/cpacf-kmac.c create mode 100644 tests/tcg/s390x/cpacf-kmc.c create mode 100644 tests/tcg/s390x/cpacf-kmctr.c create mode 100644 tests/tcg/s390x/cpacf-pcc.c create mode 100644 tests/tcg/s390x/cpacf-pckmo.c create mode 100644 tests/tcg/s390x/cpacf-prno.c create mode 100644 tests/tcg/s390x/cpacf.h
base-commit: 9696bf5dc5a5bf0b4a9d05b6cdfe5f13990f97aa --
2.43.0
PATCH v15 1/20 target/s390x: Fix missing privileged flag at PCKMO instruction
The CPACF instruction PCKMO is a privileged instruction. So set the IF_PRIV flag in insn-data.h.inc to reflect this.
--- target/s390x/tcg/insn-data.h.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
target/s390x/tcg/insn-data.h.inc +1 -1
@@ -1007,7 +1007,7 @@ /* MSA Instructions */ D(0xb91e, KMAC, RRE, MSA, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KMAC) - D(0xb928, PCKMO, RRE, MSA3, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_PCKMO) + E(0xb928, PCKMO, RRE, MSA3, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_PCKMO, IF_PRIV) D(0xb92a, KMF, RRE, MSA4, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KMF) D(0xb92b, KMO, RRE, MSA4, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KMO) D(0xb92c, PCC, RRE, MSA4, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_PCC)
Signature · 1 line
2.43.0
PATCH v15 2/20 target/s390x: Rework s390 cpacf implementations
In reply to Harald FreudenbergerFix missing parts for MSA 9 kdsa and rework the cpacf handling code so that further extensions can be made in a clean and structured way.
Introduce a new header file cpacf-arch.h to hold defines, structs and function prototypes around s390 cpacf. Use the cpcaf function defines in the existing code.
--- target/s390x/tcg/cpacf-arch.h | 226 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 101 +++++++++++--- target/s390x/tcg/insn-data.h.inc | 1 + target/s390x/tcg/translate.c | 2 + 4 files changed, 311 insertions(+), 19 deletions(-) create mode 100644 target/s390x/tcg/cpacf-arch.h
target/s390x/tcg/cpacf-arch.h new file +226 -0
@@ -0,0 +1,226 @@ +/* +* SPDX-License-Identifier: GPL-2.0-or-later +* +* s390x cpacf-arch +* +*/ + +#ifndef S390X_CPACF_ARCH_H +#define S390X_CPACF_ARCH_H + +/* +* Function codes for the KM instruction +*/ +#define CPACF_KM_QUERY 0x00 +#define CPACF_KM_DEA 0x01 +#define CPACF_KM_TDEA_128 0x02 +#define CPACF_KM_TDEA_192 0x03 +#define CPACF_KM_AES_128 0x12 +#define CPACF_KM_AES_192 0x13 +#define CPACF_KM_AES_256 0x14 +#define CPACF_KM_PAES_128 0x1a +#define CPACF_KM_PAES_192 0x1b +#define CPACF_KM_PAES_256 0x1c +#define CPACF_KM_XTS_128 0x32 +#define CPACF_KM_XTS_256 0x34 +#define CPACF_KM_PXTS_128 0x3a +#define CPACF_KM_PXTS_256 0x3c +#define CPACF_KM_FULL_XTS_128 0x52 +#define CPACF_KM_FULL_XTS_256 0x54 +#define CPACF_KM_FULL_PXTS_128 0x5a +#define CPACF_KM_FULL_PXTS_256 0x5c + +/* +* Function codes for the KMC instruction +*/ +#define CPACF_KMC_QUERY 0x00 +#define CPACF_KMC_DEA 0x01 +#define CPACF_KMC_TDEA_128 0x02 +#define CPACF_KMC_TDEA_192 0x03 +#define CPACF_KMC_AES_128 0x12 +#define CPACF_KMC_AES_192 0x13 +#define CPACF_KMC_AES_256 0x14 +#define CPACF_KMC_PAES_128 0x1a +#define CPACF_KMC_PAES_192 0x1b +#define CPACF_KMC_PAES_256 0x1c +#define CPACF_KMC_PRNG 0x43 + +/* +* Function codes for the KMCTR instruction +*/ +#define CPACF_KMCTR_QUERY 0x00 +#define CPACF_KMCTR_DEA 0x01 +#define CPACF_KMCTR_TDEA_128 0x02 +#define CPACF_KMCTR_TDEA_192 0x03 +#define CPACF_KMCTR_AES_128 0x12 +#define CPACF_KMCTR_AES_192 0x13 +#define CPACF_KMCTR_AES_256 0x14 +#define CPACF_KMCTR_PAES_128 0x1a +#define CPACF_KMCTR_PAES_192 0x1b +#define CPACF_KMCTR_PAES_256 0x1c + +/* +* Function codes for the KIMD instruction +*/ +#define CPACF_KIMD_QUERY 0x00 +#define CPACF_KIMD_SHA_1 0x01 +#define CPACF_KIMD_SHA_256 0x02 +#define CPACF_KIMD_SHA_512 0x03 +#define CPACF_KIMD_SHA3_224 0x20 +#define CPACF_KIMD_SHA3_256 0x21 +#define CPACF_KIMD_SHA3_384 0x22 +#define CPACF_KIMD_SHA3_512 0x23 +#define CPACF_KIMD_SHAKE_128 0x24 +#define CPACF_KIMD_SHAKE_256 0x25 +#define CPACF_KIMD_GHASH 0x41 + +/* +* Function codes for the KLMD instruction +*/ +#define CPACF_KLMD_QUERY 0x00 +#define CPACF_KLMD_SHA_1 0x01 +#define CPACF_KLMD_SHA_256 0x02 +#define CPACF_KLMD_SHA_512 0x03 +#define CPACF_KLMD_SHA3_224 0x20 +#define CPACF_KLMD_SHA3_256 0x21 +#define CPACF_KLMD_SHA3_384 0x22 +#define CPACF_KLMD_SHA3_512 0x23 +#define CPACF_KLMD_SHAKE_128 0x24 +#define CPACF_KLMD_SHAKE_256 0x25 + +/* +* function codes for the KMAC instruction +*/ +#define CPACF_KMAC_QUERY 0x00 +#define CPACF_KMAC_DEA 0x01 +#define CPACF_KMAC_TDEA_128 0x02 +#define CPACF_KMAC_TDEA_192 0x03 +#define CPACF_KMAC_AES_128 0x12 +#define CPACF_KMAC_AES_192 0x13 +#define CPACF_KMAC_AES_256 0x14 +#define CPACF_KMAC_PAES_128 0x1A +#define CPACF_KMAC_PAES_192 0x1B +#define CPACF_KMAC_PAES_256 0x1C +#define CPACF_KMAC_HMAC_SHA_224 0x70 +#define CPACF_KMAC_HMAC_SHA_256 0x71 +#define CPACF_KMAC_HMAC_SHA_384 0x72 +#define CPACF_KMAC_HMAC_SHA_512 0x73 +#define CPACF_KMAC_PHMAC_SHA_224 0x78 +#define CPACF_KMAC_PHMAC_SHA_256 0x79 +#define CPACF_KMAC_PHMAC_SHA_384 0x7a +#define CPACF_KMAC_PHMAC_SHA_512 0x7b + +/* +* Function codes for the PCKMO instruction +*/ +#define CPACF_PCKMO_QUERY 0x00 +#define CPACF_PCKMO_ENC_DES_KEY 0x01 +#define CPACF_PCKMO_ENC_TDES_128_KEY 0x02 +#define CPACF_PCKMO_ENC_TDES_192_KEY 0x03 +#define CPACF_PCKMO_ENC_AES_128_KEY 0x12 +#define CPACF_PCKMO_ENC_AES_192_KEY 0x13 +#define CPACF_PCKMO_ENC_AES_256_KEY 0x14 +#define CPACF_PCKMO_ENC_AES_XTS_128_DOUBLE_KEY 0x15 +#define CPACF_PCKMO_ENC_AES_XTS_256_DOUBLE_KEY 0x16 +#define CPACF_PCKMO_ENC_ECC_P256_KEY 0x20 +#define CPACF_PCKMO_ENC_ECC_P384_KEY 0x21 +#define CPACF_PCKMO_ENC_ECC_P521_KEY 0x22 +#define CPACF_PCKMO_ENC_ECC_ED25519_KEY 0x28 +#define CPACF_PCKMO_ENC_ECC_ED448_KEY 0x29 +#define CPACF_PCKMO_ENC_HMAC_512_KEY 0x76 +#define CPACF_PCKMO_ENC_HMAC_1024_KEY 0x7a + +/* +* Function codes for the PRNO instruction +*/ +#define CPACF_PRNO_QUERY 0x00 +#define CPACF_PRNO_SHA512_DRNG_GEN 0x03 +#define CPACF_PRNO_SHA512_DRNG_SEED 0x83 +#define CPACF_PRNO_TRNG_Q_R2C_RATIO 0x70 +#define CPACF_PRNO_TRNG 0x72 + +/* +* Function codes for the KMA instruction +*/ +#define CPACF_KMA_QUERY 0x00 +#define CPACF_KMA_GCM_AES_128 0x12 +#define CPACF_KMA_GCM_AES_192 0x13 +#define CPACF_KMA_GCM_AES_256 0x14 +#define CPACF_KMA_GCM_PAES_128 0x1A +#define CPACF_KMA_GCM_PAES_192 0x1B +#define CPACF_KMA_GCM_PAES_256 0x1C + +/* +* Function codes for the KMF instruction +*/ +#define CPACF_KMF_QUERY 0 +#define CPACF_KMF_DEA 1 +#define CPACF_KMF_TDEA_128 2 +#define CPACF_KMF_TDEA_192 3 +#define CPACF_KMF_AES_128 18 +#define CPACF_KMF_AES_192 19 +#define CPACF_KMF_AES_256 20 +#define CPACF_KMF_PAES_128 26 +#define CPACF_KMF_PAES_192 27 +#define CPACF_KMF_PAES_256 28 + +/* +* Function codes for the KMO instruction +*/ +#define CPACF_KMO_QUERY 0 +#define CPACF_KMO_DEA 1 +#define CPACF_KMO_TDEA_128 2 +#define CPACF_KMO_TDEA_192 3 +#define CPACF_KMO_AES_128 18 +#define CPACF_KMO_AES_192 19 +#define CPACF_KMO_AES_256 20 +#define CPACF_KMO_PAES_128 26 +#define CPACF_KMO_PAES_192 27 +#define CPACF_KMO_PAES_256 28 + +/* +* Function codes for the PCC instruction +*/ +#define CPACF_PCC_QUERY 0 +#define CPACF_PCC_CMAC_DEA 1 +#define CPACF_PCC_CMAC_TDEA_128 2 +#define CPACF_PCC_CMAC_TDEA_192 3 +#define CPACF_PCC_CMAC_AES_128 18 +#define CPACF_PCC_CMAC_AES_192 19 +#define CPACF_PCC_CMAC_AES_256 20 +#define CPACF_PCC_CMAC_PAES_128 26 +#define CPACF_PCC_CMAC_PAES_192 27 +#define CPACF_PCC_CMAC_PAES_256 28 +#define CPACF_PCC_XTS_AES_128 50 +#define CPACF_PCC_XTS_AES_256 52 +#define CPACF_PCC_XTS_PAES_128 58 +#define CPACF_PCC_XTS_PAES_256 60 +#define CPACF_PCC_SM_P256 64 +#define CPACF_PCC_SM_P384 65 +#define CPACF_PCC_SM_P521 66 +#define CPACF_PCC_SM_ED25519 72 +#define CPACF_PCC_SM_ED448 73 +#define CPACF_PCC_SM_X25519 80 +#define CPACF_PCC_SM_X448 81 + +/* +* Function codes for the KDSA instruction +*/ +#define CPACF_KDSA_QUERY 0 +#define CPACF_KDSA_VERIFY_P256 1 +#define CPACF_KDSA_VERIFY_P384 2 +#define CPACF_KDSA_VERIFY_P521 3 +#define CPACF_KDSA_SIGN_P256 9 +#define CPACF_KDSA_SIGN_P384 10 +#define CPACF_KDSA_SIGN_P521 11 +#define CPACF_KDSA_PSIGN_P256 17 +#define CPACF_KDSA_PSIGN_P384 18 +#define CPACF_KDSA_PSIGN_P521 19 +#define CPACF_KDSA_VERIFY_ED25519 32 +#define CPACF_KDSA_VERIFY_ED448 36 +#define CPACF_KDSA_SIGN_ED25519 40 +#define CPACF_KDSA_SIGN_ED448 44 +#define CPACF_KDSA_PSIGN_ED25519 48 +#define CPACF_KDSA_PSIGN_ED448 52 + +#endif /* S390X_CPACF_ARCH_H */
target/s390x/tcg/crypto_helper.c +82 -19
137 lines not on this page · raw message
target/s390x/tcg/insn-data.h.inc +1 -0
@@ -1015,6 +1015,7 @@ D(0xb92e, KM, RRE, MSA, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KM) D(0xb92f, KMC, RRE, MSA, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KMC) D(0xb929, KMA, RRF_b, MSA8, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KMA) + D(0xb93a, KDSA, RRE, MSA9, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KDSA) E(0xb93c, PPNO, RRE, MSA5, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_PPNO, IF_IO) D(0xb93e, KIMD, RRE, MSA, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KIMD) D(0xb93f, KLMD, RRE, MSA, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KLMD)
target/s390x/tcg/translate.c +2 -0
@@ -2592,6 +2592,7 @@ static DisasJumpType op_msa(DisasContext *s, DisasOps *o)/* FALL THROUGH */ case S390_FEAT_TYPE_PCKMO :case S390_FEAT_TYPE_PCC : +case S390_FEAT_TYPE_KDSA :break ;default :g_assert_not_reached ();
@@ -6048,6 +6049,7 @@ enum DisasInsnEnum {#define FAC_MSA4 S390_FEAT_MSA_EXT_4/* msa-extension-4 facility */ #define FAC_MSA5 S390_FEAT_MSA_EXT_5/* msa-extension-5 facility */ #define FAC_MSA8 S390_FEAT_MSA_EXT_8/* msa-extension-8 facility */ +#define FAC_MSA9 S390_FEAT_MSA_EXT_9/* msa-extension-9 facility */ #define FAC_ECT S390_FEAT_EXTRACT_CPU_TIME#define FAC_PCI S390_FEAT_ZPCI/* z/PCI facility */ #define FAC_AIS S390_FEAT_ADAPTER_INT_SUPPRESSION
Signature · 1 line
2.43.0
PATCH v15 3/20 target/s390x: Move cpacf sha512 code into a new file
In reply to Harald FreudenbergerMove the cpacf sha512 implementation into a new file cpacf_sha512.c. Add this new file to the build. Introduce a new header file cpacf.h which holds function prototypes and other things around cpacf local to the tcg directory.
--- target/s390x/tcg/cpacf.h | 16 ++ target/s390x/tcg/cpacf_sha512.c | 242 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 223 +--------------------------- target/s390x/tcg/meson.build | 1 + 4 files changed, 260 insertions(+), 222 deletions(-) create mode 100644 target/s390x/tcg/cpacf.h create mode 100644 target/s390x/tcg/cpacf_sha512.c
target/s390x/tcg/cpacf.h new file +16 -0
@@ -0,0 +1,16 @@ +/* +* SPDX-License-Identifier: GPL-2.0-or-later +* +* s390x cpacf +* +*/ + +#ifndef S390X_CPACF_H +#define S390X_CPACF_H + +/* from cpacf_sha512.c */ +int cpacf_sha512 (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *message_reg,uint64_t *len_reg, +uint32_t type); + +#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_sha512.c new file +242 -0
242 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +1 -222
229 lines not on this page · raw message
target/s390x/tcg/meson.build +1 -0
@@ -5,6 +5,7 @@ s390x_ss.add(when: 'CONFIG_TCG', if_true: files( )) s390x_common_ss.add(when: 'CONFIG_TCG', if_true: files( 'cc_helper.c', + 'cpacf_sha512.c', 'crypto_helper.c', 'excp_helper.c', 'fpu_helper.c',
Signature · 1 line
2.43.0
PATCH v15 4/20 target/s390x: Support cpacf sha256
In reply to Harald FreudenbergerAdd a new file cpacf_sha256.c which implements sha256. Add support for the sha256 subfuction for CPACF kimd and klmd.
--- target/s390x/gen-features.c | 2 + target/s390x/tcg/cpacf.h | 5 + target/s390x/tcg/cpacf_sha256.c | 228 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 8 ++ target/s390x/tcg/meson.build | 1 + 5 files changed, 244 insertions(+) create mode 100644 target/s390x/tcg/cpacf_sha256.c
target/s390x/gen-features.c +2 -0
@@ -917,7 +917,9 @@ static uint16_t qemu_V7_1[] = {*/ static uint16_t qemu_MAX[] = {S390_FEAT_MSA_EXT_5 , +S390_FEAT_KIMD_SHA_256 ,S390_FEAT_KIMD_SHA_512 , +S390_FEAT_KLMD_SHA_256 ,S390_FEAT_KLMD_SHA_512 ,S390_FEAT_PRNO_TRNG , };
target/s390x/tcg/cpacf.h +5 -0
@@ -8,6 +8,11 @@#ifndef S390X_CPACF_H #define S390X_CPACF_H +/* from cpacf_sha256.c */ +int cpacf_sha256 (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *message_reg,uint64_t *len_reg, +uint32_t type); +/* from cpacf_sha512.c */ int cpacf_sha512(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *message_reg, uint64_t *len_reg,
target/s390x/tcg/cpacf_sha256.c new file +228 -0
228 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +8 -0
@@ -61,6 +61,10 @@ static int cpacf_kimd(CPUS390XState *env, const int mmu_idx, const uintptr_t ra,int rc =0 ;switch (fc) { +case CPACF_KIMD_SHA_256 : + rc =cpacf_sha256 (env, mmu_idx, ra, env->regs[1 ], &env->regs[r2], + &env->regs[r2 +1 ],S390_FEAT_TYPE_KIMD ); +break ;case CPACF_KIMD_SHA_512 : rc =cpacf_sha512 (env, mmu_idx, ra, env->regs[1 ], &env->regs[r2], &env->regs[r2 +1 ],S390_FEAT_TYPE_KIMD );
@@ -78,6 +82,10 @@ static int cpacf_klmd(CPUS390XState *env, const int mmu_idx, const uintptr_t ra,int rc =0 ;switch (fc) { +case CPACF_KLMD_SHA_256 : + rc =cpacf_sha256 (env, mmu_idx, ra, env->regs[1 ], &env->regs[r2], + &env->regs[r2 +1 ],S390_FEAT_TYPE_KLMD ); +break ;case CPACF_KLMD_SHA_512 : rc =cpacf_sha512 (env, mmu_idx, ra, env->regs[1 ], &env->regs[r2], &env->regs[r2 +1 ],S390_FEAT_TYPE_KLMD );
target/s390x/tcg/meson.build +1 -0
@@ -5,6 +5,7 @@ s390x_ss.add(when: 'CONFIG_TCG', if_true: files( )) s390x_common_ss.add(when: 'CONFIG_TCG', if_true: files( 'cc_helper.c', + 'cpacf_sha256.c', 'cpacf_sha512.c', 'crypto_helper.c', 'excp_helper.c',
Signature · 1 line
2.43.0
PATCH v15 5/20 target/s390x: Add helper functions for copy memory to and from guest
In reply to Harald FreudenbergerAdd some simple helper functions to copy memory from guest to a local buffer and the other way around:
- read_guest_wrap_u8()
- write_guest_wrap_u8()
- read_guest_wrap_u32()
- write_guest_wrap_u32()
- read_guest_wrap_u64()
- write_guest_wrap_u64()
The reader functions read from guest memory into an array of u8/u32/u64 with BE conversion. Similar the writer functions write an array of u8/u32/u64 into guest memory with BE conversion.
All these functions are intended to be used for the crypto implementations thus are located in crypto_helper.h.
Rework and simplify the sha 256 and sha 512 implementations to use these helper functions.
--- target/s390x/tcg/cpacf_sha256.c | 63 ++++--------------- target/s390x/tcg/cpacf_sha512.c | 63 ++++--------------- target/s390x/tcg/crypto_helper.c | 1 + target/s390x/tcg/crypto_helper.h | 100 +++++++++++++++++++++++++++++++ 4 files changed, 123 insertions(+), 104 deletions(-) create mode 100644 target/s390x/tcg/crypto_helper.h
target/s390x/tcg/cpacf_sha256.c +11 -52
@@ -19,6 +19,7 @@#include "accel/tcg/cpu-mmu-index.h" #include "target/s390x/tcg/cpacf-arch.h" #include "target/s390x/tcg/cpacf.h" +#include "target/s390x/tcg/crypto_helper.h" static uint32_t R (uint32_t x,int c) {
@@ -104,53 +105,13 @@ static void sha256_bda_be32(uint32_t a[8], uint32_t w[16])sha256_bda (a, t); } -static void sha256_read_icv (CPUS390XState *env,const int mmu_idx, -uint64_t addr,uint32_t a[8 ],uintptr_t ra) -{ -const MemOpIdx oi =make_memop_idx (MO_BE |MO_32 |MO_UNALN , mmu_idx); - -for (int i =0 ; i <8 ; i++, addr +=4 ) { - a[i] =cpu_ldl_mmu (env,wrap_address (env, addr), oi, ra); - } -} - -static void sha256_write_ocv (CPUS390XState *env,const int mmu_idx, -uint64_t addr,uint32_t a[8 ],uintptr_t ra) -{ -const MemOpIdx oi =make_memop_idx (MO_BE |MO_32 |MO_UNALN , mmu_idx); - -for (int i =0 ; i <8 ; i++, addr +=4 ) { -cpu_stl_mmu (env,wrap_address (env, addr), a[i], oi, ra); - } -} - -static void sha256_read_block (CPUS390XState *env,const int mmu_idx, -uint64_t addr,uint32_t a[16 ],uintptr_t ra) -{ -const MemOpIdx oi =make_memop_idx (MO_BE |MO_32 |MO_UNALN , mmu_idx); - -for (int i =0 ; i <16 ; i++, addr +=4 ) { - a[i] =cpu_ldl_mmu (env,wrap_address (env, addr), oi, ra); - } -} - -static void sha256_read_mbl_be32 (CPUS390XState *env,const int mmu_idx, -uint64_t addr,uint8_t a[8 ],uintptr_t ra) -{ -const MemOpIdx oi =make_memop_idx (MO_8 , mmu_idx); - -for (int i =0 ; i <8 ; i++, addr +=1 ) { - a[i] =cpu_ldb_mmu (env,wrap_address (env, addr), oi, ra); - } -} -int cpacf_sha256 (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint64_t param_addr,uint64_t *message_reg,uint64_t *len_reg,uint32_t type) {enum {MAX_BLOCKS_PER_RUN =128 };/* 128 * 64 = 8K */ uint64_t len = *len_reg, processed =0 ; -int i, message_reg_len =64 ; +int message_reg_len =64 ;uint32_t a[8 ];g_assert (type ==S390_FEAT_TYPE_KIMD || type ==S390_FEAT_TYPE_KLMD );
@@ -165,7 +126,8 @@ int cpacf_sha256(CPUS390XState *env, const int mmu_idx, uintptr_t ra,tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); } -sha256_read_icv (env, mmu_idx, param_addr, a, ra); +/* read icv (8 * u32) */ +read_guest_wrap_u32 (env, mmu_idx, ra, param_addr, a,8 );/* Process full blocks first. */ for (; len >=64 ; len -=64 , processed +=64 ) {
@@ -175,21 +137,18 @@ int cpacf_sha256(CPUS390XState *env, const int mmu_idx, uintptr_t ra,break ; } -sha256_read_block (env, mmu_idx, *message_reg + processed, w, ra); +/* read sha256 block (16 * u32) */ +read_guest_wrap_u32 (env, mmu_idx, ra, *message_reg + processed, w,16 );sha256_bda (a, w); }/* KLMD: Process partial/empty block last. */ if (type ==S390_FEAT_TYPE_KLMD && len <64 ) { -const MemOpIdx oi =make_memop_idx (MO_8 , mmu_idx);uint8_t x[64 ]; -/* Read the remainder of the message byte-per-byte. */ -for (i =0 ; i < len; i++) { -uint64_t addr =wrap_address (env, *message_reg + processed + i); +/* Read the remainder of the message. */ +read_guest_wrap_u8 (env, mmu_idx, ra, *message_reg + processed, x, len); - x[i] =cpu_ldb_mmu (env, addr, oi, ra); - }/* Pad the remainder with zero and set the top bit. */ memset (x + len,0 ,64 - len); x[len] =0x80 ;
@@ -199,13 +158,13 @@ int cpacf_sha256(CPUS390XState *env, const int mmu_idx, uintptr_t ra,* or use an additional one. */ if (len <56 ) { -sha256_read_mbl_be32 (env, mmu_idx, param_addr +32 , x +56 , ra); +read_guest_wrap_u8 (env, mmu_idx, ra, param_addr +32 , x +56 ,8 ); }sha256_bda_be32 (a, (uint32_t *)x);if (len >=56 ) {memset (x,0 ,56 ); -sha256_read_mbl_be32 (env, mmu_idx, param_addr +32 , x +56 , ra); +read_guest_wrap_u8 (env, mmu_idx, ra, param_addr +32 , x +56 ,8 );sha256_bda_be32 (a, (uint32_t *)x); }
@@ -220,7 +179,7 @@ int cpacf_sha256(CPUS390XState *env, const int mmu_idx, uintptr_t ra,* TODO: if writing fails halfway through (e.g., when crossing page * boundaries), we're in trouble. We'd need something like access_prepare(). */ -sha256_write_ocv (env, mmu_idx, param_addr, a, ra); +write_guest_wrap_u32 (env, mmu_idx, ra, param_addr, a,8 ); *message_reg =deposit64 (*message_reg,0 , message_reg_len, *message_reg + processed); *len_reg -= processed;
target/s390x/tcg/cpacf_sha512.c +11 -52
118 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +1 -0
@@ -22,6 +22,7 @@#include "accel/tcg/cpu-mmu-index.h" #include "target/s390x/tcg/cpacf-arch.h" #include "target/s390x/tcg/cpacf.h" +#include "target/s390x/tcg/crypto_helper.h" static int fill_buf_random (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint64_t *buf_reg,uint64_t *len_reg)
target/s390x/tcg/crypto_helper.h new file +100 -0
100 lines not on this page · raw message
Signature · 1 line
2.43.0
PATCH v15 6/20 target/s390x: Adjust addressing mode checks for sha512 and sha256
In reply to Harald FreudenbergerThe handling for different addressing modes in the both sha implementations cpacf sha256 and sha512 was incomplete. Rework this addressing checking to clearly have support for s390 64 bit and 32 bit addressing mode but raise an exception otherwise.
--- target/s390x/tcg/cpacf_sha256.c | 16 +++++++++++++--- target/s390x/tcg/cpacf_sha512.c | 16 +++++++++++++--- 2 files changed, 26 insertions(+), 6 deletions(-)
target/s390x/tcg/cpacf_sha256.c +13 -3
@@ -111,14 +111,24 @@ int cpacf_sha256(CPUS390XState *env, const int mmu_idx, uintptr_t ra, {enum {MAX_BLOCKS_PER_RUN =128 };/* 128 * 64 = 8K */ uint64_t len = *len_reg, processed =0 ; -int message_reg_len =64 ; +int message_reg_len;uint32_t a[8 ];g_assert (type ==S390_FEAT_TYPE_KIMD || type ==S390_FEAT_TYPE_KLMD ); -if (!(env->psw.mask &PSW_MASK_64 )) { +/* check addressing mode, raise exception if not supported here */ +if (env->psw.mask &PSW_MASK_64 ) { + message_reg_len =64 ; + }else if (env->psw.mask &PSW_MASK_32 ) { + message_reg_len =32 ; len = (uint32_t )len; - message_reg_len = (env->psw.mask &PSW_MASK_32 ) ?32 :24 ; + }else { +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +/* early bail out if length is zero */ +if (!len) { +return 0 ; }/* KIMD: length has to be properly aligned. */
target/s390x/tcg/cpacf_sha512.c +13 -3
@@ -126,13 +126,23 @@ int cpacf_sha512(CPUS390XState *env, const int mmu_idx, uintptr_t ra, {enum {MAX_BLOCKS_PER_RUN =64 };/* Arbitrary: keep interactivity. */ uint64_t len = *len_reg, a[8 ], processed =0 ; -int message_reg_len =64 ; +int message_reg_len;g_assert (type ==S390_FEAT_TYPE_KIMD || type ==S390_FEAT_TYPE_KLMD ); -if (!(env->psw.mask &PSW_MASK_64 )) { +/* check addressing mode, raise exception if not supported here */ +if (env->psw.mask &PSW_MASK_64 ) { + message_reg_len =64 ; + }else if (env->psw.mask &PSW_MASK_32 ) { + message_reg_len =32 ; len = (uint32_t )len; - message_reg_len = (env->psw.mask &PSW_MASK_32 ) ?32 :24 ; + }else { +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +/* early bail out if length is zero */ +if (!len) { +return 0 ; }/* KIMD: length has to be properly aligned. */
Signature · 1 line
2.43.0
PATCH v15 7/20 crypto: Add aes-helpers file to support some AES modes
In reply to Harald FreudenbergerAdd a new file crypto/aes-helpers.c with simple functions to support some AES modes:
- AES cbc: AES_cbc_encrypt() AES_cbc_decrypt()
- AES ctr: AES_ctr_encrypt()
- AES xts: AES_xts_encrypt() AES_xts_decrypt()
and some AES related helpers:
- AES_xor()
- AES_xts_prep_next_tweak()
Add header file include/crypto/aes-helpers.h for these functions
--- crypto/aes-helpers.c | 106 ++++++++++++++++++++++++++++++++++ crypto/meson.build | 1 + include/crypto/aes-helpers.h | 109 +++++++++++++++++++++++++++++++++++ 3 files changed, 216 insertions(+) create mode 100644 crypto/aes-helpers.c create mode 100644 include/crypto/aes-helpers.h
crypto/aes-helpers.c new file +106 -0
@@ -0,0 +1,106 @@ +/* +* SPDX-License-Identifier: GPL-2.0-or-later +* +* AES helper functions and mode implementations +* +* Authors: +* Harald Freudenberger <[email protected]> +*/ + +#include "qemu/osdep.h" +#include "crypto/aes.h" +#include "crypto/aes-helpers.h" + +void AES_xor (const unsigned char *src1,const unsigned char *src2, +unsigned char *dst) +{ +int i; + +for (i =0 ; i <AES_BLOCK_SIZE ; i++) { + dst[i] = src1[i] ^ src2[i]; + } +} + +void AES_cbc_encrypt (const unsigned char *in,unsigned char *out, +unsigned char *iv,const AES_KEY *key) +{ +unsigned char buf[AES_BLOCK_SIZE ]; + +/* in xor iv => buf */ +AES_xor (in, iv, buf); +/* encrypt buf => out */ +AES_encrypt (buf, out, key); +/* prep iv for next round */ +memcpy (iv, out,AES_BLOCK_SIZE ); +} + +void AES_cbc_decrypt (const unsigned char *in,unsigned char *out, +unsigned char *iv,const AES_KEY *key) +{ +unsigned char buf[AES_BLOCK_SIZE ]; + +/* decrypt in => buf */ +AES_decrypt (in, buf, key); +/* buf xor iv => out */ +AES_xor (buf, iv, out); +/* prep iv for next round */ +memcpy (iv, in,AES_BLOCK_SIZE ); +} + +void AES_ctr_encrypt (const unsigned char *in,unsigned char *out, +const unsigned char *ctr,const AES_KEY *key) +{ +unsigned char buf[AES_BLOCK_SIZE ]; + +/* encrypt ctr => buf */ +AES_encrypt (ctr, buf, key); +/* exor input data with encrypted ctr => out */ +AES_xor (in, buf, out); +} + +/* +* Tweak calculation for AES XTS. +* Multiply tweak by α (x) in GF(2^128) per IEEE 1619-2007. The tweak +* is a 128-bit little-endian integer (tweak[0]=LSB, tweak[15]=MSB). +* This implementation has been verified on little and big endian. +*/ +void AES_xts_prep_next_tweak (unsigned char *tweak) +{ +unsigned char carry; +int i; + + carry = tweak[AES_BLOCK_SIZE -1 ] >>7 ; + +for (i =AES_BLOCK_SIZE -1 ; i >0 ; i--) { + tweak[i] = (unsigned char )((tweak[i] <<1 ) | (tweak[i -1 ] >>7 )); + } + + tweak[i] = (unsigned char )(tweak[i] <<1 ); + tweak[i] ^= (unsigned char )(0x87 & (unsigned char )(-(unsigned char )carry)); +} + +void AES_xts_encrypt (const unsigned char *in,unsigned char *out, +const unsigned char *tweak,const AES_KEY *key) +{ +unsigned char buf1[AES_BLOCK_SIZE ], buf2[AES_BLOCK_SIZE ]; + +/* in xor tweak => buf1 */ +AES_xor (in, tweak, buf1); +/* encrypt buf1 => buf2 */ +AES_encrypt (buf1, buf2, key); +/* buf2 xor tweak => out */ +AES_xor (buf2, tweak, out); +} + +void AES_xts_decrypt (const unsigned char *in,unsigned char *out, +const unsigned char *tweak,const AES_KEY *key) +{ +unsigned char buf1[AES_BLOCK_SIZE ], buf2[AES_BLOCK_SIZE ]; + +/* in xor tweak => buf1 */ +AES_xor (in, tweak, buf1); +/* encrypt buf1 => buf2 */ +AES_decrypt (buf1, buf2, key); +/* buf2 xor tweak => out */ +AES_xor (buf2, tweak, out); +}
crypto/meson.build +1 -0
@@ -55,6 +55,7 @@ system_ss.add(when: gnutls, if_true: files('tls-cipher-suites.c')) util_ss.add(files( 'aes.c', + 'aes-helpers.c', 'clmul.c', 'init.c', 'sm4.c',
include/crypto/aes-helpers.h new file +109 -0
109 lines not on this page · raw message
Signature · 1 line
2.43.0
PATCH v15 8/20 target/s390x: Support AES ECB for cpacf km instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KM_AES_128, CPACF_KM_AES_192 and CPACF_KM_AES_256 for the cpacf km instruction.
--- target/s390x/gen-features.c | 3 + target/s390x/tcg/cpacf.h | 6 ++ target/s390x/tcg/cpacf_aes.c | 137 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 24 ++++++ target/s390x/tcg/meson.build | 1 + 5 files changed, 171 insertions(+) create mode 100644 target/s390x/tcg/cpacf_aes.c
target/s390x/gen-features.c +3 -0
@@ -922,6 +922,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KLMD_SHA_256 ,S390_FEAT_KLMD_SHA_512 ,S390_FEAT_PRNO_TRNG , +S390_FEAT_KM_AES_128 , +S390_FEAT_KM_AES_192 , + S390_FEAT_KM_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf.h +6 -0
@@ -18,4 +18,10 @@ int cpacf_sha512(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *message_reg, uint64_t *len_reg, uint32_t type); +/* from cpacf_aes.c */ +int cpacf_aes_ecb (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod); +#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c new file +137 -0
137 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +24 -0
@@ -98,6 +98,27 @@ static int cpacf_klmd(CPUS390XState *env, const int mmu_idx, const uintptr_t ra,return rc; } +static int cpacf_km (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint32_t r1,uint32_t r2,uint32_t r3, +uint8_t fc,uint8_t mod) +{ +int rc =0 ; + +switch (fc) { +case CPACF_KM_AES_128 : +case CPACF_KM_AES_192 : +case CPACF_KM_AES_256 : + rc =cpacf_aes_ecb (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KM , fc, mod); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +static int cpacf_ppno (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint32_t r1,uint32_t r2,uint32_t r3,uint8_t fc) {
@@ -166,6 +187,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_KLMD : rc =cpacf_klmd (env, mmu_idx, ra, r1, r2, r3, fc);break ; +case S390_FEAT_TYPE_KM : + rc =cpacf_km (env, mmu_idx, ra, r1, r2, r3, fc, mod); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
target/s390x/tcg/meson.build +1 -0
@@ -5,6 +5,7 @@ s390x_ss.add(when: 'CONFIG_TCG', if_true: files( )) s390x_common_ss.add(when: 'CONFIG_TCG', if_true: files( 'cc_helper.c', + 'cpacf_aes.c', 'cpacf_sha256.c', 'cpacf_sha512.c', 'crypto_helper.c',
Signature · 1 line
2.43.0
PATCH v15 9/20 target/s390x: Support AES CBC for cpacf kmc instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KMC_AES_128, CPACF_KMC_AES_192 and CPACF_KMC_AES_256 for the cpacf kmc instruction.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 91 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 24 +++++++++ 4 files changed, 122 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -925,6 +925,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KM_AES_128 ,S390_FEAT_KM_AES_192 ,S390_FEAT_KM_AES_256 , +S390_FEAT_KMC_AES_128 , +S390_FEAT_KMC_AES_192 , + S390_FEAT_KMC_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf.h +4 -0
@@ -23,5 +23,9 @@ int cpacf_aes_ecb(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *dst_ptr_reg, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_aes_cbc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +91 -0
94 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +24 -0
@@ -119,6 +119,27 @@ static int cpacf_km(CPUS390XState *env, const int mmu_idx, uintptr_t ra,return rc; } +static int cpacf_kmc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint32_t r1,uint32_t r2,uint32_t r3, +uint8_t fc,uint8_t mod) +{ +int rc =0 ; + +switch (fc) { +case CPACF_KMC_AES_128 : +case CPACF_KMC_AES_192 : +case CPACF_KMC_AES_256 : + rc =cpacf_aes_cbc (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KMC , fc, mod); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +static int cpacf_ppno (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint32_t r1,uint32_t r2,uint32_t r3,uint8_t fc) {
@@ -190,6 +211,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_KM : rc =cpacf_km (env, mmu_idx, ra, r1, r2, r3, fc, mod);break ; +case S390_FEAT_TYPE_KMC : + rc =cpacf_kmc (env, mmu_idx, ra, r1, r2, r3, fc, mod); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
Signature · 1 line
2.43.0
PATCH v15 10/20 target/s390x: Support AES CTR for cpacf kmctr instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KMCTR_AES_128, CPACF_KMCTR_AES_192 and CPACF_KMCTR_AES_256 for the cpacf kmctr instruction.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf.h | 5 ++ target/s390x/tcg/cpacf_aes.c | 82 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 24 ++++++++++ 4 files changed, 114 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -928,6 +928,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMC_AES_128 ,S390_FEAT_KMC_AES_192 ,S390_FEAT_KMC_AES_256 , +S390_FEAT_KMCTR_AES_128 , +S390_FEAT_KMCTR_AES_192 , + S390_FEAT_KMCTR_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf.h +5 -0
@@ -27,5 +27,10 @@ int cpacf_aes_cbc(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *dst_ptr_reg, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_aes_ctr (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint64_t *ctr_ptr_reg,uint32_t type, +uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +82 -0
85 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +24 -0
@@ -140,6 +140,27 @@ static int cpacf_kmc(CPUS390XState *env, const int mmu_idx, uintptr_t ra,return rc; } +static int cpacf_kmctr (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint32_t r1,uint32_t r2,uint32_t r3, +uint8_t fc,uint8_t mod) +{ +int rc =0 ; + +switch (fc) { +case CPACF_KMCTR_AES_128 : +case CPACF_KMCTR_AES_192 : +case CPACF_KMCTR_AES_256 : + rc =cpacf_aes_ctr (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], + &env->regs[r3],S390_FEAT_TYPE_KMCTR , fc, mod); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +static int cpacf_ppno (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint32_t r1,uint32_t r2,uint32_t r3,uint8_t fc) {
@@ -214,6 +235,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_KMC : rc =cpacf_kmc (env, mmu_idx, ra, r1, r2, r3, fc, mod);break ; +case S390_FEAT_TYPE_KMCTR : + rc =cpacf_kmctr (env, mmu_idx, ra, r1, r2, r3, fc, mod); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
Signature · 1 line
2.43.0
PATCH v15 11/20 target/s390x: Minimal AES XTS support for cpacf pcc instruction
In reply to Harald FreudenbergerSupport CPACF pcc subfunctions PCC-Compute-XTS-Parameter-AES-128 and PCC-Compute-XTS-Parameter-AES-245 but only for the special case block sequential number is 0. However, this covers the s390 AES XTS implementation in the Linux kernel and Libica and thus also Opencryptoki clear key via Libica.
--- target/s390x/gen-features.c | 2 ++ target/s390x/tcg/cpacf.h | 2 ++ target/s390x/tcg/cpacf_aes.c | 54 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 20 ++++++++++++ 4 files changed, 78 insertions(+)
target/s390x/gen-features.c +2 -0
@@ -931,6 +931,8 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMCTR_AES_128 ,S390_FEAT_KMCTR_AES_192 ,S390_FEAT_KMCTR_AES_256 , +S390_FEAT_PCC_XTS_AES_128 , + S390_FEAT_PCC_XTS_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf.h +2 -0
@@ -32,5 +32,7 @@ int cpacf_aes_ctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint64_t *ctr_ptr_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_aes_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint8_t fc);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +54 -0
57 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +20 -0
@@ -182,6 +182,23 @@ static int cpacf_ppno(CPUS390XState *env, const int mmu_idx, uintptr_t ra,return rc; } +static int cpacf_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint8_t fc) +{ +int rc =0 ; + +switch (fc) { +case CPACF_PCC_XTS_AES_128 : +case CPACF_PCC_XTS_AES_256 : + rc =cpacf_aes_pcc (env, mmu_idx, ra, env->regs[1 ], fc); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +uint32_t HELPER (msa )(CPUS390XState *env,uint32_t r1,uint32_t r2,uint32_t r3,uint32_t type) {
@@ -238,6 +255,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_KMCTR : rc =cpacf_kmctr (env, mmu_idx, ra, r1, r2, r3, fc, mod);break ; +case S390_FEAT_TYPE_PCC : + rc =cpacf_pcc (env, mmu_idx, ra, fc); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
Signature · 1 line
2.43.0
PATCH v15 12/20 target/s390x: Support AES XTS for cpacf km instruction
In reply to Harald FreudenbergerSupport the subfunctions XTS-AES-128 and XTS-AES-256 for the cpacf km instruction.
--- target/s390x/gen-features.c | 2 + target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 93 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 6 +++ 4 files changed, 105 insertions(+)
target/s390x/gen-features.c +2 -0
@@ -925,6 +925,8 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KM_AES_128 ,S390_FEAT_KM_AES_192 ,S390_FEAT_KM_AES_256 , +S390_FEAT_KM_XTS_AES_128 , +S390_FEAT_KM_XTS_AES_256 ,S390_FEAT_KMC_AES_128 ,S390_FEAT_KMC_AES_192 , S390_FEAT_KMC_AES_256,
target/s390x/tcg/cpacf.h +4 -0
@@ -34,5 +34,9 @@ int cpacf_aes_ctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint8_t fc, uint8_t mod);int cpacf_aes_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint64_t param_addr,uint8_t fc); +int cpacf_aes_xts (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +93 -0
96 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +6 -0
@@ -112,6 +112,12 @@ static int cpacf_km(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], S390_FEAT_TYPE_KM, fc, mod);break ; +case CPACF_KM_XTS_128 : +case CPACF_KM_XTS_256 : + rc =cpacf_aes_xts (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KM , fc, mod); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v15 13/20 target/s390x: Base support for cpacf protected keys and pckmo
In reply to Harald FreudenbergerAdd base support for cpacf protected key handling.
Add support for the pckmo subfunctions PCKMO-Encrypt-AES-128-Key, PCKMO-Encrypt-AES-192-Key and PCKMO-Encrypt-AES-256-Key which deal with protected keys. These pckmo subfunctions derive a protected key from an AES clear key by encrypting it with an internal AES wrapping key. More details about protected keys can be found in the "z/Architecture Prinziples of Operation" document.
The qemu version provided here is only a fake intended to make protected key available for developing and testing purpose:
* The protected key is 'derived' from the clear key by xoring the fixed pattern 0xAAAA... onto the key value.
* The AES Wrapping Key Verification Pattern is a fixed value of 32 bytes 0x0F0A0C0E0F0A0C0E...
Add preprocessor defines for the xor pattern and wkvp used to construct ('encrypt') a protected key from a clear key value with this implementation. Also add some static functions to 'encrypt' from clear key to protected key and 'decrypt' back to cpacf_aes.c.
The preprocessor defines shall be used later in testcases to construct and decode protected keys.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf-arch.h | 25 +++++++++++++ target/s390x/tcg/cpacf.h | 2 + target/s390x/tcg/cpacf_aes.c | 64 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 21 +++++++++++ target/s390x/tcg/translate.c | 9 ++++- 6 files changed, 122 insertions(+), 2 deletions(-)
target/s390x/gen-features.c +3 -0
@@ -935,6 +935,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMCTR_AES_256 ,S390_FEAT_PCC_XTS_AES_128 ,S390_FEAT_PCC_XTS_AES_256 , +S390_FEAT_PCKMO_AES_128 , +S390_FEAT_PCKMO_AES_192 , + S390_FEAT_PCKMO_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf-arch.h +25 -0
@@ -223,4 +223,29 @@#define CPACF_KDSA_PSIGN_ED25519 48#define CPACF_KDSA_PSIGN_ED448 52 +/* +* Support for protected key cpacf functions. Note that this is +* a fake implementation intended for debugging and development. +* Do not use for production load ! +*/ + +/* +* Hard coded pattern xored with the AES clear key +* to 'produce' the protected key. +*/ +#define PROTKEY_XOR_PATTERN { \ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, \ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, \ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, \ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA } + +/* +* Hard coded wkvp ("Wrapping Key Verification Pattern") +*/ +#define PROTKEY_WKVP { \ + 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E, \ + 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E, \ + 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E, \ + 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E } +#endif /* S390X_CPACF_ARCH_H */
target/s390x/tcg/cpacf.h +2 -0
@@ -38,5 +38,7 @@ int cpacf_aes_xts(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *dst_ptr_reg, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_aes_pckmo (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint8_t fc);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +64 -0
67 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +21 -0
@@ -205,6 +205,24 @@ static int cpacf_pcc(CPUS390XState *env, const int mmu_idx, uintptr_t ra,return rc; } +static int cpacf_pckmo (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint8_t fc) +{ +int rc =0 ; + +switch (fc) { +case CPACF_PCKMO_ENC_AES_128_KEY : +case CPACF_PCKMO_ENC_AES_192_KEY : +case CPACF_PCKMO_ENC_AES_256_KEY : + rc =cpacf_aes_pckmo (env, mmu_idx, ra, env->regs[1 ], fc); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +uint32_t HELPER (msa )(CPUS390XState *env,uint32_t r1,uint32_t r2,uint32_t r3,uint32_t type) {
@@ -264,6 +282,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_PCC : rc =cpacf_pcc (env, mmu_idx, ra, fc);break ; +case S390_FEAT_TYPE_PCKMO : + rc =cpacf_pckmo (env, mmu_idx, ra, fc); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
target/s390x/tcg/translate.c +7 -2
@@ -2558,6 +2558,7 @@ static DisasJumpType op_msa(DisasContext *s, DisasOps *o)int r2 =have_field (s, r2) ?get_field (s, r2) :0 ;int r3 =have_field (s, r3) ?get_field (s, r3) :0 ;TCGv_i32 t_r1, t_r2, t_r3, type; +bool update_cc = true;switch (s->insn->data) {case S390_FEAT_TYPE_KMA :
@@ -2589,8 +2590,10 @@ static DisasJumpType op_msa(DisasContext *s, DisasOps *o)gen_program_exception (s,PGM_SPECIFICATION );return DISAS_NORETURN ; } -/* FALL THROUGH */ +break ;case S390_FEAT_TYPE_PCKMO : + update_cc = false; +/* FALL THROUGH */ case S390_FEAT_TYPE_PCC :case S390_FEAT_TYPE_KDSA :break ;
@@ -2603,7 +2606,9 @@ static DisasJumpType op_msa(DisasContext *s, DisasOps *o) t_r3 =tcg_constant_i32 (r3); type =tcg_constant_i32 (s->insn->data);gen_helper_msa (cc_op, tcg_env, t_r1, t_r2, t_r3, type); -set_cc_static (s); +if (update_cc) { +set_cc_static (s); + }return DISAS_NEXT ; }
Signature · 1 line
2.43.0
PATCH v15 14/20 target/s390x: Support protected key AES ECB for cpacf km instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KM_PAES_128, CPACF_KM_PAES_192 and CPACF_KM_PAES_256 for the cpacf km instruction.
--- target/s390x/gen-features.c | 3 + target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 103 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 7 +++ 4 files changed, 117 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -925,6 +925,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KM_AES_128 ,S390_FEAT_KM_AES_192 ,S390_FEAT_KM_AES_256 , +S390_FEAT_KM_EAES_128 , +S390_FEAT_KM_EAES_192 , +S390_FEAT_KM_EAES_256 ,S390_FEAT_KM_XTS_AES_128 ,S390_FEAT_KM_XTS_AES_256 , S390_FEAT_KMC_AES_128,
target/s390x/tcg/cpacf.h +4 -0
@@ -40,5 +40,9 @@ int cpacf_aes_xts(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint32_t type, uint8_t fc, uint8_t mod);int cpacf_aes_pckmo (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint64_t param_addr,uint8_t fc); +int cpacf_paes_ecb (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +103 -0
112 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +7 -0
@@ -112,6 +112,13 @@ static int cpacf_km(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], S390_FEAT_TYPE_KM, fc, mod);break ; +case CPACF_KM_PAES_128 : +case CPACF_KM_PAES_192 : +case CPACF_KM_PAES_256 : + rc =cpacf_paes_ecb (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KM , fc, mod); +break ;case CPACF_KM_XTS_128 :case CPACF_KM_XTS_256 : rc = cpacf_aes_xts(env, mmu_idx, ra, env->regs[1],
Signature · 1 line
2.43.0
PATCH v15 15/20 target/s390x: Support protected key AES CBC for cpacf kmc instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KMC_PAES_128, CPACF_KMC_PAES_192 and CPACF_KMC_PAES_256 for the cpacf kmc instruction.
--- target/s390x/gen-features.c | 3 + target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 102 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 7 +++ 4 files changed, 116 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -933,6 +933,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMC_AES_128 ,S390_FEAT_KMC_AES_192 ,S390_FEAT_KMC_AES_256 , +S390_FEAT_KMC_EAES_128 , +S390_FEAT_KMC_EAES_192 , +S390_FEAT_KMC_EAES_256 ,S390_FEAT_KMCTR_AES_128 ,S390_FEAT_KMCTR_AES_192 , S390_FEAT_KMCTR_AES_256,
target/s390x/tcg/cpacf.h +4 -0
@@ -44,5 +44,9 @@ int cpacf_paes_ecb(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *dst_ptr_reg, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_paes_cbc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +102 -0
105 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +7 -0
@@ -146,6 +146,13 @@ static int cpacf_kmc(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], S390_FEAT_TYPE_KMC, fc, mod);break ; +case CPACF_KMC_PAES_128 : +case CPACF_KMC_PAES_192 : +case CPACF_KMC_PAES_256 : + rc =cpacf_paes_cbc (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KMC , fc, mod); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v15 16/20 target/s390x: Support protected key AES CTR for cpacf kmctr instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KMCTR_PAES_128, CPACF_KMCTR_PAES_192 and CPACF_KMCTR_PAES_256 for the cpacf kmctr instruction.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf.h | 5 ++ target/s390x/tcg/cpacf_aes.c | 92 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 7 +++ 4 files changed, 107 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -939,6 +939,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMCTR_AES_128 ,S390_FEAT_KMCTR_AES_192 ,S390_FEAT_KMCTR_AES_256 , +S390_FEAT_KMCTR_EAES_128 , +S390_FEAT_KMCTR_EAES_192 , +S390_FEAT_KMCTR_EAES_256 ,S390_FEAT_PCC_XTS_AES_128 ,S390_FEAT_PCC_XTS_AES_256 , S390_FEAT_PCKMO_AES_128,
target/s390x/tcg/cpacf.h +5 -0
@@ -48,5 +48,10 @@ int cpacf_paes_cbc(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *dst_ptr_reg, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_paes_ctr (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint64_t *ctr_ptr_reg,uint32_t type, +uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +92 -0
95 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +7 -0
@@ -174,6 +174,13 @@ static int cpacf_kmctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], &env->regs[r3], S390_FEAT_TYPE_KMCTR, fc, mod);break ; +case CPACF_KMCTR_PAES_128 : +case CPACF_KMCTR_PAES_192 : +case CPACF_KMCTR_PAES_256 : + rc =cpacf_paes_ctr (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], + &env->regs[r3],S390_FEAT_TYPE_KMCTR , fc, mod); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v15 17/20 target/s390x: Minimal protected key AES XTS support for cpacf pcc instruction
In reply to Harald FreudenbergerSupport CPACF pcc subfunctions PCC-Compute-XTS-Parameter-Encrypted-AES-128 and PCC-Compute-XTS-Parameter-Encrypted-AES-128 but only for the special case block sequential number is 0. However, this covers the s390 PAES XTS implementation in the Linux kernel.
--- target/s390x/gen-features.c | 2 + target/s390x/tcg/cpacf.h | 2 + target/s390x/tcg/cpacf_aes.c | 65 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 4 ++ 4 files changed, 73 insertions(+)
target/s390x/gen-features.c +2 -0
@@ -944,6 +944,8 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMCTR_EAES_256 ,S390_FEAT_PCC_XTS_AES_128 ,S390_FEAT_PCC_XTS_AES_256 , +S390_FEAT_PCC_XTS_EAES_128 , +S390_FEAT_PCC_XTS_EAES_256 ,S390_FEAT_PCKMO_AES_128 ,S390_FEAT_PCKMO_AES_192 , S390_FEAT_PCKMO_AES_256,
target/s390x/tcg/cpacf.h +2 -0
@@ -53,5 +53,7 @@ int cpacf_paes_ctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint64_t *ctr_ptr_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_paes_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint8_t fc);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +65 -0
68 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +4 -0
@@ -219,6 +219,10 @@ static int cpacf_pcc(CPUS390XState *env, const int mmu_idx, uintptr_t ra,case CPACF_PCC_XTS_AES_256 : rc =cpacf_aes_pcc (env, mmu_idx, ra, env->regs[1 ], fc);break ; +case CPACF_PCC_XTS_PAES_128 : +case CPACF_PCC_XTS_PAES_256 : + rc =cpacf_paes_pcc (env, mmu_idx, ra, env->regs[1 ], fc); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v15 18/20 target/s390x: Support protected key AES XTS for cpacf km instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KM_PXTS_128 and CPACF_KM_PXTS_256 for the cpacf km instruction.
--- target/s390x/gen-features.c | 2 + target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 105 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 6 ++ 4 files changed, 117 insertions(+)
target/s390x/gen-features.c +2 -0
@@ -930,6 +930,8 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KM_EAES_256 ,S390_FEAT_KM_XTS_AES_128 ,S390_FEAT_KM_XTS_AES_256 , +S390_FEAT_KM_XTS_EAES_128 , +S390_FEAT_KM_XTS_EAES_256 ,S390_FEAT_KMC_AES_128 ,S390_FEAT_KMC_AES_192 , S390_FEAT_KMC_AES_256,
target/s390x/tcg/cpacf.h +4 -0
@@ -55,5 +55,9 @@ int cpacf_paes_ctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint8_t fc, uint8_t mod);int cpacf_paes_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint64_t param_addr,uint8_t fc); +int cpacf_paes_xts (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +105 -0
108 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +6 -0
@@ -125,6 +125,12 @@ static int cpacf_km(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], S390_FEAT_TYPE_KM, fc, mod);break ; +case CPACF_KM_PXTS_128 : +case CPACF_KM_PXTS_256 : + rc =cpacf_paes_xts (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KM , fc, mod); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v15 19/20 docs/s390: Document CPACF instructions support
In reply to Harald FreudenbergerAdd a first document covering the Qemu s390 CPACF instructions and functions supported.
--- docs/system/s390x/cpacf.rst | 146 +++++++++++++++++++++++++++++++++++ docs/system/target-s390x.rst | 1 + 2 files changed, 147 insertions(+) create mode 100644 docs/system/s390x/cpacf.rst
docs/system/s390x/cpacf.rst new file +146 -0
@@ -0,0 +1,146 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +CPACF Support +============= + +CPACF +----- + +CP Assist for Cryptographic Function (CPACF) is a hardware-integrated +coprocessor feature built into every processor core of IBM Z and +LinuxONE mainframes (s390x architecture). It provides high-speed, +hardware-accelerated encryption and hashing directly on the CPU. + +CPACF provides a set of z/Architecture instructions (known as Message +Security Assist or MSA) that execute cryptographic operations +synchronously with the main processor. + +- Symmetric Encryption: Support for AES (128, 192, 256-bit), DES, and + Triple-DES (TDES). +- Hashing: Acceleration for SHA-1, SHA-2 (up to SHA-512), SHA-3 and + SHAKE. +- Random Number Generation: Pseudo Random Number Generator (PRNG) and + a hardware-based True Random Number Generator (TRNG). +- Asymmetric Support: Elliptic Curve Cryptography (ECC) primitives + P-256, P-384, P-521, Montgomery/Edwards curves (e.g., Ed25519). + +Documentation about CPACF instructions is publicly available and +can be found in the "z/Architecture Principles of Operation" +accessible at the IBM documentation hub https://www.ibm.com/docs/en. +For example the latest version as a pdf is available here: +https://www.ibm.com/support/pages/zvm/library/other/22783214.pdf + + +CPACF instructions +------------------ + +Here is a list of implemented CPACF instructions and the supported +functions for each instruction: + +KDSA (COMPUTE DIGITAL SIGNATURE AUTHENTICATION) +- Function code 0x00 - Function Query + +KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST) +- Function code 0x00 - Function Query +- Function code 0x02 - CPACF_KIMD_SHA_256 +- Function code 0x03 - CPACF_KIMD_SHA_512 + +KLMD (COMPUTE LAST MESSAGE DIGEST) +- Function code 0x00 - Function Query +- Function code 0x02 - CPACF_KLMD_SHA_256 +- Function code 0x03 - CPACF_KLMD_SHA_512 + +KM (CIPHER MESSAGE) +- Function code 0x00 - Function Query +- Function code 0x12 - CPACF_KM_AES_128 +- Function code 0x13 - CPACF_KM_AES_192 +- Function code 0x14 - CPACF_KM_AES_256 +- Function code 0x1a - CPACF_KM_PAES_128 +- Function code 0x1b - CPACF_KM_PAES_192 +- Function code 0x1c - CPACF_KM_PAES_256 +- Function code 0x32 - CPACF_KM_XTS_128 +- Function code 0x34 - CPACF_KM_XTS_256 +- Function code 0x3a - CPACF_KM_PXTS_128 +- Function code 0x3c - CPACF_KM_PXTS_256 + +KMAC (COMPUTE MESSAGE AUTHENTICATION CODE) +- Function code 0x00 - Function Query + +KMC (CIPHER MESSAGE WITH CHAINING) +- Function code 0x00 - Function Query +- Function code 0x12 - CPACF_KMC_AES_128 +- Function code 0x13 - CPACF_KMC_AES_192 +- Function code 0x14 - CPACF_KMC_AES_256 +- Function code 0x1a - CPACF_KMC_PAES_128 +- Function code 0x1b - CPACF_KMC_PAES_192 +- Function code 0x1c - CPACF_KMC_PAES_256 + +KMCTR (CIPHER MESSAGE WITH COUNTER) +- Function code 0x00 - Function Query +- Function code 0x12 - CPACF_KMCTR_AES_128 +- Function code 0x13 - CPACF_KMCTR_AES_192 +- Function code 0x14 - CPACF_KMCTR_AES_256 +- Function code 0x1a - CPACF_KMCTR_PAES_128 +- Function code 0x1b - CPACF_KMCTR_PAES_192 +- Function code 0x1c - CPACF_KMCTR_PAES_256 + +KMF (CIPHER MESSAGE WITH CIPHER FEEDBACK) +- not supported + +KMO (CIPHER MESSAGE WITH OUTPUT FEEDBACK) +- not supported + +PCC (PERFORM CRYPTOGRAPHIC COMPUTATION) +- Function code 0x00 - Function Query +- Function code 0x32 - compute XTS param AES-128 +- Function code 0x34 - compute XTS param AES-256 +- Function code 0x3a - compute XTS param Encrypted AES-128 +- Function code 0x3c - compute XTS param Encrypted AES-256 + +PCKMO (PERFORM CRYPTOGRAPHIC KEY MANAGEMENT OPERATION) +- Function code 0x00 - Function Query +- Function code 0x12 - CPACF_PCKMO_ENC_AES_128_KEY +- Function code 0x13 - CPACF_PCKMO_ENC_AES_192_KEY +- Function code 0x14 - CPACF_PCKMO_ENC_AES_256_KEY + +PRNO (PERFORM RANDOM NUMBER OPERATION) +- Function code 0x00 - Function Query +- Function code 0x72 - CPACF_PRNO_TRNG + +Note that the use of a not supported CPACF instruction (KMF and KMO) +or invocation of a not listed function will result in a Specification +Exception. + +Not listed CPACF instructions (KMA, KMF, KMO) cause an Operation +Exception when used. Not listed functions cause a Specification +Exception when called. If only the query function is listed (KDSA), +then the query function will return a function status word with all +but the query function bit set to 0. + + +Protected key support +--------------------- + +The qemu version for protected key support is only a fake provided +here for developing and testing purpose: + +- The protected key is _derived_ from the clear key by xoring the + fixed pattern 0xAAAA... onto the key value. +- The AES Wrapping Key Verification Pattern is a fixed value of 32 + bytes 0x0F0A0C0E0F0A0C0E... + +The PCKMO instruction implementation does exactly this - _derive_ a +_protected_ key from the clear key given by xor 0xAAAA... and writing +the fixed value for the WKVP of 0x0F0A0C0E0F0A0C0E... into the blob. +The other subfunctions of the CPACF instructions dealing with +protected key treat the protected key blob by first checking for the +WKVP (against the fixed value of 0x0F0A0C0E0F0A0C0E...) and second +_decrypting_ the key value by xoring 0xAAAA... and then execute the +clear key operation with the decrypted key value. +This is suitable for testing purpose but such keys are not for real +production load and would open up a huge security breach! + +For more details about protected keys see the "z/Architecture +Principles of Operation" document chapter "General Instructions" +sub-chapter "Protection of Cryptographic Keys" and again the +implementation here does NOT implement what is explained there.
docs/system/target-s390x.rst +1 -0
@@ -35,3 +35,4 @@ Architectural features s390x/bootdevices s390x/protvirt s390x/cpu-topology + s390x/cpacf
Signature · 1 line
2.43.0
PATCH v15 20/20 tests/tcg/s390x: Add tests for CPACF instructions
In reply to Harald FreudenbergerAdd simple tests for the CPACF instructions implemented:
- kdsa - minimal as only query is implemented
- kimd - query, sha256, sha512
- klmd - query, sha256, sha512
- km - query, aes 128, 192, 256 with clear and prot key
- kmac - minimal as only query is implemented
- kmc - query, aes 128, 192, 256 with clear and prot key
- kmctr - query, aes 128, 192, 256 with clear and prot key
- pcc - query, xts aes 128, 256 and prot key xts aes 128, 256
- pckmo - run query and check for SIGILL
- prno - query, trng
No test for kma, kmf, kmo as these instructions are currently not implemented at all.
--- tests/tcg/s390x/Makefile.target | 10 + tests/tcg/s390x/cpacf-kdsa.c | 58 ++++ tests/tcg/s390x/cpacf-kimd.c | 166 +++++++++ tests/tcg/s390x/cpacf-klmd.c | 206 +++++++++++ tests/tcg/s390x/cpacf-km.c | 590 ++++++++++++++++++++++++++++++++ tests/tcg/s390x/cpacf-kmac.c | 58 ++++ tests/tcg/s390x/cpacf-kmc.c | 351 +++++++++++++++++++ tests/tcg/s390x/cpacf-kmctr.c | 360 +++++++++++++++++++ tests/tcg/s390x/cpacf-pcc.c | 245 +++++++++++++ tests/tcg/s390x/cpacf-pckmo.c | 45 +++ tests/tcg/s390x/cpacf-prno.c | 131 +++++++ tests/tcg/s390x/cpacf.h | 570 ++++++++++++++++++++++++++++++ 12 files changed, 2790 insertions(+) create mode 100644 tests/tcg/s390x/cpacf-kdsa.c create mode 100644 tests/tcg/s390x/cpacf-kimd.c create mode 100644 tests/tcg/s390x/cpacf-klmd.c create mode 100644 tests/tcg/s390x/cpacf-km.c create mode 100644 tests/tcg/s390x/cpacf-kmac.c create mode 100644 tests/tcg/s390x/cpacf-kmc.c create mode 100644 tests/tcg/s390x/cpacf-kmctr.c create mode 100644 tests/tcg/s390x/cpacf-pcc.c create mode 100644 tests/tcg/s390x/cpacf-pckmo.c create mode 100644 tests/tcg/s390x/cpacf-prno.c create mode 100644 tests/tcg/s390x/cpacf.h
tests/tcg/s390x/Makefile.target +10 -0
@@ -51,6 +51,16 @@ TESTS+=ts TESTS+=ex-smc TESTS+=divide-to-integer TESTS+=stckf +TESTS+=cpacf-kdsa +TESTS+=cpacf-kimd +TESTS+=cpacf-klmd +TESTS+=cpacf-km +TESTS+=cpacf-kmac +TESTS+=cpacf-kmc +TESTS+=cpacf-kmctr +TESTS+=cpacf-pcc +TESTS+=cpacf-pckmo +TESTS+=cpacf-prno cdsg: CFLAGS+=-pthread cdsg: LDFLAGS+=-pthread
tests/tcg/s390x/cpacf-kdsa.c new file +58 -0
58 lines not on this page · raw message
tests/tcg/s390x/cpacf-kimd.c new file +166 -0
166 lines not on this page · raw message
tests/tcg/s390x/cpacf-klmd.c new file +206 -0
206 lines not on this page · raw message
tests/tcg/s390x/cpacf-km.c new file +590 -0
590 lines not on this page · raw message
tests/tcg/s390x/cpacf-kmac.c new file +58 -0
58 lines not on this page · raw message
tests/tcg/s390x/cpacf-kmc.c new file +351 -0
351 lines not on this page · raw message
tests/tcg/s390x/cpacf-kmctr.c new file +360 -0
360 lines not on this page · raw message
tests/tcg/s390x/cpacf-pcc.c new file +245 -0
245 lines not on this page · raw message
tests/tcg/s390x/cpacf-pckmo.c new file +45 -0
45 lines not on this page · raw message
tests/tcg/s390x/cpacf-prno.c new file +131 -0
131 lines not on this page · raw message
tests/tcg/s390x/cpacf.h new file +570 -0
570 lines not on this page · raw message
Signature · 1 line
2.43.0