Skip to contentSkip to conversation

wifi: mt76: mt7615: read MT7663 temperature from the correct offset

PATCH New Ahmed Naseef 1 participant 1 message Aug 19

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 wifi: mt76: mt7615: read MT7663 temperature from the correct offset

On MT7663 the hwmon temp1_input attribute always reads 0.

mt7615_mcu_parse_response() takes the temperature from the first dword of the THERMAL_CTRL response payload, but MT7663 firmware reports it in the second one. On a DASAN H660GM-A (MT7663E, N9 firmware 7663mp1827) the request and its response are:

request: 00 00 00 00
response: 00 00 00 00 2a 00 00 00

0x2a is the reading, 42 degrees, while the driver returns the leading zero. mt7915 and mt7921 already pull sizeof(*rxd) + 4 for this command.

Restrict the extra pull to MT7663, as no MT7615 or MT7622 hardware was available to check whether their firmware uses the same layout.

Fixes f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support")
---
 drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c +2 -0
index ff57ede87f71..1ce0192c2c91 100644
@@ -153,6 +153,8 @@ int mt7615_mcu_parse_response(struct mt76_dev *mdev, int cmd,
 		ret = *skb->data;
 	} else if (cmd == MCU_EXT_CMD(THERMAL_CTRL)) {
 		skb_pull(skb, sizeof(*rxd));
+		if (is_mt7663(mdev))
+			skb_pull(skb, 4);
 		ret = le32_to_cpu(*(__le32 *)skb->data);
 	} else if (cmd == MCU_EXT_QUERY(RF_REG_ACCESS)) {
 		skb_pull(skb, sizeof(*rxd));
Signature · 1 line
2.34.1