net: net6: validate IPv6 payload and UDP length on receive
PATCH 1/1 net: net6: validate IPv6 payload and UDP length on receive
net_ip6_handler() checks the received length only against IP6_HDR_SIZE and then uses two length fields from the packet without checking them. The checksum is computed over payload_len, but the length passed to the UDP handler comes from udp_len. A sender can keep payload_len correct so the checksum still validates and set udp_len larger than the frame. A handler that trusts that length then reads or writes past the receive buffer. The DHCPv6 client copies the declared number of bytes and can be made to write past the packet buffer from a single link-local ADVERTISE.
The IPv4 path already reconciles these lengths in net_process_received_packet(). Do the same here: reject a payload_len that exceeds the received length and trim len to it, then reject a udp_len smaller than the UDP header or larger than the payload before calling the handler.
--- net/net6.c | 9 +++++++++ 1 file changed, 9 insertions(+)
net/net6.c +9 -0
@@ -392,6 +392,11 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len)if (ip6->version !=6 )return -EINVAL ; +/* Trim to the length declared in the header, as the IPv4 path does */ +if (len <IP6_HDR_SIZE +ntohs (ip6->payload_len)) +return -EINVAL ; + len =IP6_HDR_SIZE +ntohs (ip6->payload_len); +switch (ip6->nexthdr) {case PROT_ICMPV6 : icmp = (struct icmp6hdr *)(((uchar *)ip6) +IP6_HDR_SIZE );
@@ -433,6 +438,10 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len)if (csum != udp->udp_xsum)return -EINVAL ; +if (ntohs (udp->udp_len) <UDP_HDR_SIZE || +ntohs (udp->udp_len) > len -IP6_HDR_SIZE ) +return -EINVAL ; +/* IP header OK. Pass the packet to the current handler. */ net_get_udp_handler()((uchar *)ip6 + IP6_HDR_SIZE + UDP_HDR_SIZE,
---
base-commit: ece349ade2973e220f524ce59e59711cc919263f
change-id: 20260807-net6-len-validation-cd71efd96a7f
Best regards,
Signature · 1 line
Esteban Alba <[email protected]>
Hi Esteban,
Quoted 43 lines · On 08/08/2026 04:09, Esteban Alba via B4 Relay wrote:
From: Esteban Alba <[email protected]>
net_ip6_handler()checks the received length only againstIP6_HDR_SIZEand then uses two length fields from the packet without checking them. The checksum is computed overpayload_len, but the length passed to the UDP handler comes fromudp_len. A sender can keeppayload_lencorrect so the checksum still validates and setudp_lenlarger than the frame. A handler that trusts that length then reads or writes past the receive buffer. The DHCPv6 client copies the declared number of bytes and can be made to write past the packet buffer from a single link-local ADVERTISE.The IPv4 path already reconciles these lengths in
net_process_received_packet(). Do the same here: reject apayload_lenthat exceeds the received length and trim len to it, then reject audp_lensmaller than the UDP header or larger than the payload before calling the handler.Fixes 1feb697830ce ("net: ipv6: Add implementation of main IPv6 functions")Signed-off-by Esteban Alba <[email protected]>Cc Jerome Forissier <[email protected]>Cc Tom Rini <[email protected]>--- net/net6.c | 9 +++++++++ 1 file changed, 9 insertions(+)net/net6.c +5
-0@@ -392,6 +392,11 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len)if (ip6->version !=6 )return -EINVAL ; +/* Trim to the length declared in the header, as the IPv4 path does */ +if (len <IP6_HDR_SIZE +ntohs (ip6->payload_len)) +return -EINVAL ; + len =IP6_HDR_SIZE +ntohs (ip6->payload_len); +switch (ip6->nexthdr) {case PROT_ICMPV6 : icmp = (struct icmp6hdr *)(((uchar *)ip6) +IP6_HDR_SIZE );
net/net6.c int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len) · line 447
Quoted 10 lines
net/net6.c +4
-0@@ -433,6 +438,10 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len)if (csum != udp->udp_xsum)return -EINVAL ; +if (ntohs (udp->udp_len) <UDP_HDR_SIZE || +ntohs (udp->udp_len) > len -IP6_HDR_SIZE ) +return -EINVAL ; +/* IP header OK. Pass the packet to the current handler. */ net_get_udp_handler()((uchar *)ip6 + IP6_HDR_SIZE + UDP_HDR_SIZE,
I still see a couple of issues in this code. In the UDP path, udp->udp_xsum is accessed before checking that payload_len >= UDP_HDR_SIZE, so a short IPv6 payload can still cause an out-of-bounds access. The ICMPv6 path has the same issue when accessing struct icmp6hdr.
The transport header size therefore needs to be validated before either header is dereferenced. The UDP length checks should also be done before accessing the UDP checksum field.
Something along the following lines:
net/net6.c +10 -1
@@ -370,11 +370,19 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len)if (ip6->version !=6 )return -EINVAL ; + hlen =ntohs (ip6->payload_len); + +/* Trim to the length declared in the header, as the IPv4 path does */ +if (len <IP6_HDR_SIZE + hlen) +return -EINVAL ; + len =IP6_HDR_SIZE + hlen; +switch (ip6->nexthdr) {case PROT_ICMPV6 : +if (hlen <sizeof (struct icmp6hdr )) +return -EINVAL ; + icmp = (struct icmp6hdr *)(((uchar *)ip6) +IP6_HDR_SIZE ); csum = icmp->icmp6_cksum; - hlen =ntohs (ip6->payload_len); icmp->icmp6_cksum =0 ;/* checksum */
csum_p = csum_partial((u8 *)icmp, hlen, 0);
@@ -398,9 +406,15 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len)
}
break;
case IPPROTO_UDP:
+ if (hlen < UDP_HDR_SIZE)
+ return -EINVAL;
+
udp = (struct udp_hdr *)(((uchar *)ip6) + IP6_HDR_SIZE);
+ if (ntohs(udp->udp_len) < UDP_HDR_SIZE ||
+ ntohs(udp->udp_len) > hlen)
+ return -EINVAL;
+
csum = udp->udp_xsum;
- hlen = ntohs(ip6->payload_len);
udp->udp_xsum = 0;
/* checksum */
csum_p = csum_partial((u8 *)udp, hlen, 0);
Thanks,
Signature · 1 line
Jerome
Quoted 9 lines
---
base-commit:ece349ade2973e220f524ce59e59711cc919263f
change-id: 20260807-net6-len-validation-cd71efd96a7fBest regards,
Signature · 1 line
Esteban Alba <[email protected]>
PATCH v2 1/1 net: net6: validate IPv6 payload and transport lengths on receive
In reply to Esteban Albanet_ip6_handler() checks the received length only against IP6_HDR_SIZE and then uses length fields from the packet without checking them. The checksum is computed over payload_len, but the UDP handler length comes from udp_len. A sender can keep payload_len correct so the checksum still validates and set udp_len larger than the frame. A handler that trusts that length then reads or writes past the receive buffer. The DHCPv6 client copies the declared number of bytes and can be made to write past the packet buffer from a single link-local ADVERTISE.
Validate payload_len against the received length and trim len to it before protocol dispatch. Validate the ICMPv6 and UDP header sizes before either header is dereferenced, and validate udp_len before reading udp_xsum or calling the UDP handler.
---
Validate the IPv6 payload length against the received frame before protocol dispatch, then validate the ICMPv6 and UDP transport header sizes andudp_len before either header is dereferenced or the UDP handler is called.
---
Changes in v2:
- Move payload_len reconciliation before protocol dispatch.
- Validate ICMPv6 and UDP header sizes before dereferencing their headers.
- Validate udp_len before reading udp_xsum or dispatching to the UDP handler.
- Link to v1: https://patch.msgid.link/[email protected]
To: [email protected]
Cc: Ramon Fried <[email protected]>
Cc: Jerome Forissier <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Viacheslav Mitrofanov <[email protected]>
Cc: Simon Glass <[email protected]>
--- net/net6.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
net/net6.c +16 -2
@@ -392,11 +392,19 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len)if (ip6->version !=6 )return -EINVAL ; + hlen =ntohs (ip6->payload_len); + +if (len <IP6_HDR_SIZE + hlen) +return -EINVAL ; + len =IP6_HDR_SIZE + hlen; +switch (ip6->nexthdr) {case PROT_ICMPV6 : +if (hlen <sizeof (struct icmp6hdr )) +return -EINVAL ; + icmp = (struct icmp6hdr *)(((uchar *)ip6) +IP6_HDR_SIZE ); csum = icmp->icmp6_cksum; - hlen =ntohs (ip6->payload_len); icmp->icmp6_cksum =0 ;/* checksum */ csum_p =csum_partial ((u8 *)icmp, hlen,0 );
@@ -421,9 +429,15 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len) }break ;case IPPROTO_UDP : +if (hlen <UDP_HDR_SIZE ) +return -EINVAL ; + udp = (struct udp_hdr *)(((uchar *)ip6) +IP6_HDR_SIZE ); +if (ntohs (udp->udp_len) <UDP_HDR_SIZE || +ntohs (udp->udp_len) > hlen) +return -EINVAL ; + csum = udp->udp_xsum; - hlen =ntohs (ip6->payload_len); udp->udp_xsum =0 ;/* checksum */ csum_p =csum_partial ((u8 *)udp, hlen,0 );
---
base-commit: ece349ade2973e220f524ce59e59711cc919263f
change-id: 20260807-net6-len-validation-cd71efd96a7f
Best regards,
Signature · 1 line
Esteban Alba <[email protected]>
Re: [PATCH v2] net: net6: validate IPv6 payload and transport lengths on receive
Hi Esteban,
Quoted 87 lines · On 21/08/2026 09:07, Esteban Alba via B4 Relay wrote:
From: Esteban Alba <[email protected]>
net_ip6_handler()checks the received length only againstIP6_HDR_SIZEand then uses length fields from the packet without checking them. The checksum is computed overpayload_len, but the UDP handler length comes fromudp_len. A sender can keeppayload_lencorrect so the checksum still validates and setudp_lenlarger than the frame. A handler that trusts that length then reads or writes past the receive buffer. The DHCPv6 client copies the declared number of bytes and can be made to write past the packet buffer from a single link-local ADVERTISE.Validate
payload_lenagainst the received length and trim len to it before protocol dispatch. Validate the ICMPv6 and UDP header sizes before either header is dereferenced, and validateudp_lenbefore readingudp_xsumor calling the UDP handler.Fixes 1feb697830ce ("net: ipv6: Add implementation of main IPv6 functions")Suggested-by Jerome Forissier <[email protected]>Signed-off-by Esteban Alba <[email protected]>---
Validate the IPv6 payload length against the received frame before protocol dispatch, then validate the ICMPv6 and UDP transport header sizes andudp_lenbefore either header is dereferenced or the UDP handler is called.
---
Changes in v2:
- Movepayload_lenreconciliation before protocol dispatch.
- Validate ICMPv6 and UDP header sizes before dereferencing their headers.
- Validateudp_lenbefore readingudp_xsumor dispatching to the UDP handler.
- Link to v1: https://patch.msgid.link/[email protected]To: [email protected]
Cc: Ramon Fried <[email protected]>
Cc: Jerome Forissier <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Viacheslav Mitrofanov <[email protected]>
Cc: Simon Glass <[email protected]>--- net/net6.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)net/net6.c +16
-3@@ -392,11 +392,19 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len)if (ip6->version !=6 )return -EINVAL ; + hlen =ntohs (ip6->payload_len); + +if (len <IP6_HDR_SIZE + hlen) +return -EINVAL ; + len =IP6_HDR_SIZE + hlen; +switch (ip6->nexthdr) {case PROT_ICMPV6 : +if (hlen <sizeof (struct icmp6hdr )) +return -EINVAL ; + icmp = (struct icmp6hdr *)(((uchar *)ip6) +IP6_HDR_SIZE ); csum = icmp->icmp6_cksum; - hlen =ntohs (ip6->payload_len); icmp->icmp6_cksum =0 ;/* checksum */ csum_p =csum_partial ((u8 *)icmp, hlen,0 );@@ -421,9 +429,15 @@ int net_ip6_handler(struct ethernet_hdr *et, struct ip6_hdr *ip6, int len) }break ;case IPPROTO_UDP : +if (hlen <UDP_HDR_SIZE ) +return -EINVAL ; + udp = (struct udp_hdr *)(((uchar *)ip6) +IP6_HDR_SIZE ); +if (ntohs (udp->udp_len) <UDP_HDR_SIZE || +ntohs (udp->udp_len) > hlen) +return -EINVAL ; + csum = udp->udp_xsum; - hlen =ntohs (ip6->payload_len); udp->udp_xsum =0 ;/* checksum */ csum_p =csum_partial ((u8 *)udp, hlen,0 ); ---base-commit:
ece349ade2973e220f524ce59e59711cc919263f
change-id: 20260807-net6-len-validation-cd71efd96a7f
Quoted 3 lines
Best regards,
Signature · 1 line
Esteban Alba <[email protected]>
Thanks,
Signature · 1 line
Jerome
Re: [PATCH v2] net: net6: validate IPv6 payload and transport lengths on receive
In reply to Esteban AlbaQuoted 10 lines · Esteban Alba
net_ip6_handler()checks the received length only againstIP6_HDR_SIZEand then uses length fields from the packet without checking them. The checksum is computed overpayload_len, but the UDP handler length comes fromudp_len. A sender can keeppayload_lencorrect so the checksum still validates and setudp_lenlarger than the frame. A handler that trusts that length then reads or writes past the receive buffer. The DHCPv6 client copies the declared number of bytes and can be made to write past the packet buffer from a single link-local ADVERTISE.[...]
Applied to u-boot-net branch for-main, thanks!
[1/1] net: net6: validate IPv6 payload and transport lengths on receive
commit: 80215cdacd2acfe92152344e5269461446aa80ff
Best regards,
Signature · 1 line
Jerome Forissier <[email protected]>