platform/x86: hp-wmi: Add OMEN board 8A18 thermal profile support
PATCH 1/1 platform/x86: hp-wmi: Add OMEN board 8A18 thermal profile support
The HP OMEN 17-ck1000nw (board ID: 8A18) supports the existing OMEN thermal profile handling.
Add the DMI board name to omen_thermal_profile_boards[] so that the existing thermal profile support is enabled for this board.
This enables the existing fan control and platform profile handling for 8A18.
The board has been reported as working with this configuration in OmenCtl.
--- drivers/platform/x86/hp/hp-wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/hp/hp-wmi.c +1 -1
@@ -207,7 +207,7 @@ static const char * const omen_thermal_profile_boards[] = {"886B" ,"886C" ,"88C8" ,"88CB" ,"88D1" ,"88D2" ,"88F4" ,"88F5" ,"88F6" ,"88F7" ,"88FD" ,"88FE" ,"88FF" ,"8900" ,"8901" ,"8902" ,"8912" ,"8917" ,"8918" ,"8949" ,"894A" ,"89EB" , -"8A15" ,"8A42" ,"8A43" , +"8A15" ,"8A18" ,"8A42" ,"8A43" ,"8BAD" ,"8C58" , "8E41",
Signature · 1 line
2.55.0
Ilpo Järvinen
maintainerQuoted 10 lines · Suryansh Singh
The HP OMEN 17-ck1000nw (board ID: 8A18) supports the existing OMEN thermal profile handling.
Add the DMI board name to omen_thermal_profile_boards[] so that the existing thermal profile support is enabled for this board.
This enables the existing fan control and platform profile handling for 8A18.
[...]
Thank you for your contribution, it has been applied to my local review-ilpo-next branch. Note it will show up in the public platform-drivers-x86/review-ilpo-next branch only once I've pushed my local branch there, which might take a while.
FYI [if applicable to your patch], as per Linus' policy change, also fixes are mostly routed through for-next unless the fix is for a commit introduced in the most recent cycle or is clearly a regression fix.
The list of commits applied:
[1/1] platform/x86: hp-wmi: Add OMEN board 8A18 thermal profile support
commit: 6241e07ab561fa017b0eb63f785b98aefcfb2477
--
i.