ARM: dts: helios4: fix lm75 supply name
Subsystems (2)
PATCH 1/1 ARM: dts: helios4: fix lm75 supply name
The lm75 driver requests a regulator named "vs" (the +VS power pin of the chip). The Helios4 DTS incorrectly used vcc-supply instead of vs-supply, causing the regulator core to emit:
lm75 0-004c: supply vs not found, using dummy regulator
Fix the property name to match the binding and the driver.
Fixes ced8025b569e ("ARM: dts: armada388-helios4")
Assisted-by opencode:big-pickle
Signed-off-by Rosen Penev <[email protected]>
--- arch/arm/boot/dts/marvell/armada-388-helios4.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/marvell/armada-388-helios4.dts +1 -1
@@ -200,7 +200,7 @@ usb3-ilimit-hog { temp_sensor: temp@4c { compatible = "ti,lm75"; reg = <0x4c>; - vcc-supply = <®_3p3v>; + vs-supply = <®_3p3v>; }; eeprom@53 {
Signature · 1 line
2.55.0
Gregory CLEMENT
maintainerQuoted 7 lines · Rosen Penev
The lm75 driver requests a regulator named "vs" (the +VS power pin of the chip). The Helios4 DTS incorrectly used vcc-supply instead of vs-supply, causing the regulator core to emit:
lm75 0-004c: supply vs not found, using dummy regulator
Fix the property name to match the binding and the driver.
Applied on mvebu/dt
Thanks,
Gregory
Quoted 24 lines
Fixes ced8025b569e ("ARM: dts: armada388-helios4")Assisted-by opencode:big-pickleSigned-off-by Rosen Penev <[email protected]>--- arch/arm/boot/dts/marvell/armada-388-helios4.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/boot/dts/marvell/armada-388-helios4.dts +1
-1@@ -200,7 +200,7 @@ usb3-ilimit-hog { temp_sensor: temp@4c { compatible = "ti,lm75"; reg = <0x4c>; - vcc-supply = <®_3p3v>; + vs-supply = <®_3p3v>; }; eeprom@53 {Signature · 1 line
2.55.0
Signature · 3 lines
Grégory CLEMENT, Bootlin Embedded Linux and Kernel engineering https://bootlin.com