Add initial support for Qualcomm SM7250 SoC
Subsystems (8)
v5 cover Add initial support for Qualcomm SM7250 SoC
This patchset introduces foundational upstream support for the Qualcomm SM7250 SoC (internally codenamed Lito).
SM7250 is an ARMv8.2-A platform manufactured on a 7nm process, featuring an octa-core Kryo 475 CPU configuration (1x Prime Cortex-A77, 1x Gold Cortex-A77, and 6x Silver Cortex-A55) and Adreno 620 GPU.
This patchset is organized as follows:
Quoted 1 line
Document relevant device tree bindings (SoC ID, Kryo 475 CPUs, SCM, PDC,
RPMh clocks/power domains, GCC and cpufreq hardware).
Quoted 2 lines
Add driver support for SM7250 in socinfo, rpmh-clk, rpmhpd, and GCC. Add the base SoC DTSI (
sm7250.dtsi) defining the cpus, PSCI,
interrupt controllers, clock providers, power domains, and reserved memory.
Dependencies:
This patchset depends on the following patch:
Quoted 1 line
[PATCH] dt-bindings: clock: qcom,sm6375-gcc: Merge SM7150 into SM6375
[PATCH v4] Link: https://lore.kernel.org/linux-arm-msm/[email protected]/T/#t
Changes in [PATCH v5]:
[PATCH v5 13/13]: arm64: dts: qcom: Add SM7250 devicetree file
Quoted 2 lines
Reformat multi-entry phandle lists (domain-idle-states) to '<&a>, <&b>'. Reformat multi-entry tuples and string lists (qcom,pdc-ranges, qcom,tcs-config, reg-names)
to one item per line.
Quoted 3 lines
Enable QUPv3 wrapper globally by dropping 'status = "disabled"'. Move compatible property to first.
Remove clock-frequency property for timer.
Sreeshankar K (13):
dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
soc: qcom: socinfo: Add SM7250 SoC ID
dt-bindings: clock: Add SM7250 global clock controller
clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible for SM7250
clk: qcom: rpmh: Add SM7250 rpmh clocks
dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
pmdomain: qcom: rpmhpd: Add RPMh power domains for SM7250
dt-bindings: arm: cpus: Document Kryo 475 CPUs
dt-bindings: firmware: qcom,scm: Document SM7250 SCM
dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
arm64: dts: qcom: Add SM7250 devicetree file
.../devicetree/bindings/arm/cpus.yaml | 1 + .../bindings/clock/qcom,rpmhcc.yaml | 1 + .../bindings/clock/qcom,sm6375-gcc.yaml | 4 +- .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 1 + .../bindings/firmware/qcom,scm.yaml | 1 + .../interrupt-controller/qcom,pdc.yaml | 1 + .../devicetree/bindings/power/qcom,rpmpd.yaml | 1 + arch/arm64/boot/dts/qcom/sm7250.dtsi | 771 ++++++ drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/clk-rpmh.c | 24 + drivers/clk/qcom/gcc-sm7250.c | 2275 +++++++++++++++++ drivers/pmdomain/qcom/rpmhpd.c | 19 + drivers/soc/qcom/socinfo.c | 1 + include/dt-bindings/arm/qcom,ids.h | 1 + include/dt-bindings/clock/qcom,sm7250-gcc.h | 163 ++ 16 files changed, 3273 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/qcom/sm7250.dtsi create mode 100644 drivers/clk/qcom/gcc-sm7250.c create mode 100644 include/dt-bindings/clock/qcom,sm7250-gcc.h
Signature · 1 line
2.43.0
PATCH v5 1/13 dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
Add the ID for the Qualcomm SM7250 SoC.
--- include/dt-bindings/arm/qcom,ids.h | 1 + 1 file changed, 1 insertion(+)
include/dt-bindings/arm/qcom,ids.h +1 -0
@@ -209,6 +209,7 @@#define QCOM_ID_IPQ8172 397#define QCOM_ID_IPQ8173 398#define QCOM_ID_IPQ8174 399 +#define QCOM_ID_SM7250 400#define QCOM_ID_IPQ6018 402#define QCOM_ID_IPQ6028 403#define QCOM_ID_SDM429W 416
Signature · 1 line
2.43.0
PATCH v5 2/13 soc: qcom: socinfo: Add SM7250 SoC ID
In reply to Sreeshankar KAdd SoC ID for Qualcomm SM7250 SoC.
--- drivers/soc/qcom/socinfo.c | 1 + 1 file changed, 1 insertion(+)
drivers/soc/qcom/socinfo.c +1 -0
@@ -450,6 +450,7 @@ static const struct soc_id soc_id[] = { { qcom_board_id(IPQ8172) }, { qcom_board_id(IPQ8173) }, { qcom_board_id(IPQ8174) }, + { qcom_board_id(SM7250) }, { qcom_board_id(IPQ6018) }, { qcom_board_id(IPQ6028) }, { qcom_board_id(SDM429W) },
Signature · 1 line
2.43.0
PATCH v5 3/13 dt-bindings: clock: Add SM7250 global clock controller
In reply to Sreeshankar KAdd device tree bindings for global clock controller on SM7250 SoC.
--- .../bindings/clock/qcom,sm6375-gcc.yaml | 4 +- include/dt-bindings/clock/qcom,sm7250-gcc.h | 163 ++++++++++++++++++ 2 files changed, 166 insertions(+), 1 deletion(-) create mode 100644 include/dt-bindings/clock/qcom,sm7250-gcc.h
Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml +3 -1
@@ -4,13 +4,14 @@ $id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Global Clock & Reset Controller on SM6375 and SM7150 +title: Qualcomm Global Clock & Reset Controller on SM6375, SM7150 and SM7250 maintainers: - Konrad Dybcio <[email protected]> - Bjorn Andersson <[email protected]> - Danila Tikhonov <[email protected]> - David Wronek <[email protected]> + - Sreeshankar K <[email protected]> description: | Qualcomm global clock control module provides the clocks, resets and power
@@ -26,6 +27,7 @@ properties: enum: - qcom,sm6375-gcc - qcom,sm7150-gcc + - qcom,sm7250-gcc clocks: items:
include/dt-bindings/clock/qcom,sm7250-gcc.h new file +163 -0
163 lines not on this page · raw message
Signature · 1 line
2.43.0
PATCH v5 4/13 clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
In reply to Sreeshankar KAdd support for the global clock controller found on SM7250 based devices. This should allow most non-multimedia device drivers to probe and control their clocks.
--- drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-sm7250.c | 2275 +++++++++++++++++++++++++++++++++ 3 files changed, 2285 insertions(+) create mode 100644 drivers/clk/qcom/gcc-sm7250.c
drivers/clk/qcom/Kconfig +9 -0
@@ -1416,6 +1416,15 @@ config SM_GCC_7150 Say Y if you want to use peripheral devices such as UART, SPI, I2C, USB, SD/UFS, PCIe etc. +config SM_GCC_7250 + tristate "SM7250 Global Clock Controller" + depends on ARM64 || COMPILE_TEST + select QCOM_GDSC + help + Support for the global clock controller on SM7250 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS etc. + config SM_GCC_MILOS tristate "Milos Global Clock Controller" depends on ARM64 || COMPILE_TEST
drivers/clk/qcom/Makefile +1 -0
@@ -174,6 +174,7 @@ obj-$(CONFIG_SM_GCC_6125) += gcc-sm6125.o obj-$(CONFIG_SM_GCC_6350) += gcc-sm6350.o obj-$(CONFIG_SM_GCC_6375) += gcc-sm6375.o obj-$(CONFIG_SM_GCC_7150) += gcc-sm7150.o +obj-$(CONFIG_SM_GCC_7250) += gcc-sm7250.o obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o obj-$(CONFIG_SM_GCC_8350) += gcc-sm8350.o
drivers/clk/qcom/gcc-sm7250.c new file +2275 -0
2,275 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH v5 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
Quoted 11 lines · Sreeshankar K
Add support for the global clock controller found on SM7250 based devices. This should allow most non-multimedia device drivers to probe and control their clocks.
Signed-off-by Sreeshankar K <[email protected]>--- drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-sm7250.c | 2275 +++++++++++++++++++++++++++++++++ 3 files changed, 2285 insertions(+) create mode 100644 drivers/clk/qcom/gcc-sm7250.c
[...]
Quoted 13 lines
drivers/clk/qcom/gcc-sm7250.c new file +7
-0@@ -0,0 +1,2275 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. +* Copyright (c) 2026, Sreeshankar K <[email protected]> +*/ + +
[...]
drivers/clk/qcom/gcc-sm7250.c line 46
Quoted 7 lines
drivers/clk/qcom/gcc-sm7250.c new file +7
-0+static struct clk_alpha_pll gpll0 = { + .offset =0x0 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID ], + .clkr = { + .enable_reg =0x52010 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ){
You missed my other comment from v4.
const here and everywhere else.
It is always a good practice to compare to other (older) drivers from upstream.
Quoted 10 lines
drivers/clk/qcom/gcc-sm7250.c new file +10
-0+ .name = "gpll0", + .parent_data = &(const struct clk_parent_data ){ + .index =DT_BI_TCXO , + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fixed_lucid_ops, + }, + }, +}; +
[...]
Re: [PATCH v5 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
Thanks for the review.
Missed that, I apologize. I will send a v6 patchset with everything fixed.
Thanks,
Sreeshankar K
Quoted 59 lines · Abel Vesa
Quoted 11 lines · Sreeshankar K
Add support for the global clock controller found on SM7250 based devices. This should allow most non-multimedia device drivers to probe and control their clocks.
Signed-off-by Sreeshankar K <[email protected]>--- drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-sm7250.c | 2275 +++++++++++++++++++++++++++++++++ 3 files changed, 2285 insertions(+) create mode 100644 drivers/clk/qcom/gcc-sm7250.c[...]
Quoted 13 lines
drivers/clk/qcom/gcc-sm7250.c new file +7
-0@@ -0,0 +1,2275 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. +* Copyright (c) 2026, Sreeshankar K <[email protected]> +*/ + +[...]
drivers/clk/qcom/gcc-sm7250.c line 46
Quoted 7 lines
drivers/clk/qcom/gcc-sm7250.c new file +7
-0+static struct clk_alpha_pll gpll0 = { + .offset =0x0 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID ], + .clkr = { + .enable_reg =0x52010 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ){You missed my other comment from v4.
const here and everywhere else.
It is always a good practice to compare to other (older) drivers from upstream.
Quoted 10 lines
drivers/clk/qcom/gcc-sm7250.c new file +10
-0+ .name = "gpll0", + .parent_data = &(const struct clk_parent_data ){ + .index =DT_BI_TCXO , + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fixed_lucid_ops, + }, + }, +}; +[...]
Re: [PATCH v5 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
Quoted 68 lines · Sreeshankar K
Thanks for the review.
Missed that, I apologize. I will send a v6 patchset with everything fixed.
Thanks,
Sreeshankar KQuoted 59 lines · Abel Vesa
Quoted 11 lines · Sreeshankar K
Add support for the global clock controller found on SM7250 based devices. This should allow most non-multimedia device drivers to probe and control their clocks.
Signed-off-by Sreeshankar K <[email protected]>--- drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-sm7250.c | 2275 +++++++++++++++++++++++++++++++++ 3 files changed, 2285 insertions(+) create mode 100644 drivers/clk/qcom/gcc-sm7250.c[...]
Quoted 13 lines
drivers/clk/qcom/gcc-sm7250.c new file +7
-0@@ -0,0 +1,2275 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. +* Copyright (c) 2026, Sreeshankar K <[email protected]> +*/ + +[...]
drivers/clk/qcom/gcc-sm7250.c line 46
Quoted 7 lines
drivers/clk/qcom/gcc-sm7250.c new file +7
-0+static struct clk_alpha_pll gpll0 = { + .offset =0x0 , + .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID ], + .clkr = { + .enable_reg =0x52010 , + .enable_mask =BIT (0 ), + .hw.init = &(struct clk_init_data ){You missed my other comment from v4.
const here and everywhere else.
It is always a good practice to compare to other (older) drivers from upstream.
Quoted 10 lines
drivers/clk/qcom/gcc-sm7250.c new file +10
-0+ .name = "gpll0", + .parent_data = &(const struct clk_parent_data ){ + .index =DT_BI_TCXO , + }, + .num_parents = 1, + .ops = &clk_alpha_pll_fixed_lucid_ops, + }, + }, +}; +[...]
Thanks for the review.
Missed that, I apologize. I will send a v6 patchset with everything fixed.
Thanks,
Sreeshankar K
PATCH v5 5/13 dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible for SM7250
In reply to Sreeshankar KDocument RPMHCC compatible for clock rpmh driver on Qualcomm SM7250 SoC.
--- Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +1 -0
@@ -38,6 +38,7 @@ properties: - qcom,sdx75-rpmh-clk - qcom,sm4450-rpmh-clk - qcom,sm6350-rpmh-clk + - qcom,sm7250-rpmh-clk - qcom,sm8150-rpmh-clk - qcom,sm8250-rpmh-clk - qcom,sm8350-rpmh-clk
Signature · 1 line
2.43.0
PATCH v5 6/13 clk: qcom: rpmh: Add SM7250 rpmh clocks
In reply to Sreeshankar KAdd the RPMH clocks present in SM7250 SoC.
--- drivers/clk/qcom/clk-rpmh.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
drivers/clk/qcom/clk-rpmh.c +24 -0
@@ -1011,6 +1011,29 @@ static const struct clk_rpmh_desc clk_rpmh_hawi = { .num_clks = ARRAY_SIZE(hawi_rpmh_clocks), }; +static struct clk_hw *sm7250_rpmh_clocks[] = { + [RPMH_CXO_CLK ] = &clk_rpmh_bi_tcxo_div2.hw, + [RPMH_CXO_CLK_A ] = &clk_rpmh_bi_tcxo_div2_ao.hw, + [RPMH_LN_BB_CLK2 ] = &clk_rpmh_ln_bb_clk2_a2.hw, + [RPMH_LN_BB_CLK2_A ] = &clk_rpmh_ln_bb_clk2_a2_ao.hw, + [RPMH_LN_BB_CLK3 ] = &clk_rpmh_ln_bb_clk3_a2.hw, + [RPMH_LN_BB_CLK3_A ] = &clk_rpmh_ln_bb_clk3_a2_ao.hw, + [RPMH_RF_CLK1 ] = &clk_rpmh_rf_clk1_d.hw, + [RPMH_RF_CLK1_A ] = &clk_rpmh_rf_clk1_d_ao.hw, + [RPMH_RF_CLK2 ] = &clk_rpmh_rf_clk2_d.hw, + [RPMH_RF_CLK2_A ] = &clk_rpmh_rf_clk2_d_ao.hw, + [RPMH_RF_CLK3 ] = &clk_rpmh_rf_clk3_d.hw, + [RPMH_RF_CLK3_A ] = &clk_rpmh_rf_clk3_d_ao.hw, + [RPMH_RF_CLK4 ] = &clk_rpmh_rf_clk4_d.hw, + [RPMH_RF_CLK4_A ] = &clk_rpmh_rf_clk4_d_ao.hw, + [RPMH_IPA_CLK ] = &clk_rpmh_ipa.hw, +}; + +static const struct clk_rpmh_desc clk_rpmh_sm7250 = { + .clks = sm7250_rpmh_clocks, + .num_clks =ARRAY_SIZE (sm7250_rpmh_clocks), +}; +static struct clk_hw *of_clk_rpmh_hw_get (struct of_phandle_args *clkspec,void *data) {
@@ -1120,6 +1143,7 @@ static const struct of_device_id clk_rpmh_match_table[] = { { .compatible = "qcom,sdx75-rpmh-clk", .data = &clk_rpmh_sdx75}, { .compatible = "qcom,sm4450-rpmh-clk", .data = &clk_rpmh_sm4450}, { .compatible = "qcom,sm6350-rpmh-clk", .data = &clk_rpmh_sm6350}, + { .compatible = "qcom,sm7250-rpmh-clk", .data = &clk_rpmh_sm7250}, { .compatible = "qcom,sm8150-rpmh-clk", .data = &clk_rpmh_sm8150}, { .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250}, { .compatible = "qcom,sm8350-rpmh-clk", .data = &clk_rpmh_sm8350},
Signature · 1 line
2.43.0
PATCH v5 7/13 dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
In reply to Sreeshankar KDocument the RPMh power domain for SM7250 SoC.
--- Documentation/devicetree/bindings/power/qcom,rpmpd.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +1 -0
@@ -63,6 +63,7 @@ properties: - qcom,sm6350-rpmhpd - qcom,sm6375-rpmpd - qcom,sm7150-rpmhpd + - qcom,sm7250-rpmhpd - qcom,sm8150-rpmhpd - qcom,sm8250-rpmhpd - qcom,sm8350-rpmhpd
Signature · 1 line
2.43.0
PATCH v5 8/13 pmdomain: qcom: rpmhpd: Add RPMh power domains for SM7250
In reply to Sreeshankar KAdd RPMh power domains for SM7250 SoC.
--- drivers/pmdomain/qcom/rpmhpd.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
drivers/pmdomain/qcom/rpmhpd.c +19 -0
@@ -490,6 +490,24 @@ static const struct rpmhpd_desc sm7150_desc = { .num_pds = ARRAY_SIZE(sm7150_rpmhpds), }; +/* SM7250 RPMH powerdomains */ +static struct rpmhpd *sm7250_rpmhpds[] = { + [RPMHPD_CX ] = &cx_w_mx_parent, + [RPMHPD_CX_AO ] = &cx_ao_w_mx_parent, + [RPMHPD_EBI ] = &ebi, + [RPMHPD_GFX ] = &gfx, + [RPMHPD_LCX ] = &lcx, + [RPMHPD_LMX ] = &lmx, + [RPMHPD_MSS ] = &mss, + [RPMHPD_MX ] = &mx, + [RPMHPD_MX_AO ] = &mx_ao, +}; + +static const struct rpmhpd_desc sm7250_desc = { + .rpmhpds = sm7250_rpmhpds, + .num_pds =ARRAY_SIZE (sm7250_rpmhpds), +}; +/* SM8150 RPMH powerdomains */ static struct rpmhpd *sm8150_rpmhpds[] = { [SM8150_CX ] = &cx_w_mx_parent,
@@ -910,6 +928,7 @@ static const struct of_device_id rpmhpd_match_table[] = { { .compatible = "qcom,sm4450-rpmhpd", .data = &sm4450_desc }, { .compatible = "qcom,sm6350-rpmhpd", .data = &sm6350_desc }, { .compatible = "qcom,sm7150-rpmhpd", .data = &sm7150_desc }, + { .compatible = "qcom,sm7250-rpmhpd", .data = &sm7250_desc }, { .compatible = "qcom,sm8150-rpmhpd", .data = &sm8150_desc }, { .compatible = "qcom,sm8250-rpmhpd", .data = &sm8250_desc }, { .compatible = "qcom,sm8350-rpmhpd", .data = &sm8350_desc },
Signature · 1 line
2.43.0
PATCH v5 9/13 dt-bindings: arm: cpus: Document Kryo 475 CPUs
In reply to Sreeshankar KDocument Kryo 475 CPUs found in Qualcomm SM7250 SoC.
--- Documentation/devicetree/bindings/arm/cpus.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/cpus.yaml +1 -0
@@ -212,6 +212,7 @@ properties: - qcom,kryo465 - qcom,kryo468 - qcom,kryo470 + - qcom,kryo475 - qcom,kryo485 - qcom,kryo560 - qcom,kryo570
Signature · 1 line
2.43.0
PATCH v5 10/13 dt-bindings: firmware: qcom,scm: Document SM7250 SCM
In reply to Sreeshankar KDocument the SCM compatible for Qualcomm SM7250 SoC.
--- Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/firmware/qcom,scm.yaml +1 -0
@@ -74,6 +74,7 @@ properties: - qcom,scm-sm6350 - qcom,scm-sm6375 - qcom,scm-sm7150 + - qcom,scm-sm7250 - qcom,scm-sm8150 - qcom,scm-sm8250 - qcom,scm-sm8350
Signature · 1 line
2.43.0
PATCH v5 11/13 dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
In reply to Sreeshankar KDocument the PDC block on the SM7250 SoC.
--- .../devicetree/bindings/interrupt-controller/qcom,pdc.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml +1 -0
@@ -50,6 +50,7 @@ properties: - qcom,sdx75-pdc - qcom,sm4450-pdc - qcom,sm6350-pdc + - qcom,sm7250-pdc - qcom,sm8150-pdc - qcom,sm8250-pdc - qcom,sm8350-pdc
Signature · 1 line
2.43.0
PATCH v5 12/13 dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
In reply to Sreeshankar KDocument the cpufreq hardware on the SM7250 SoC.
--- Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +1 -0
@@ -29,6 +29,7 @@ properties: - qcom,sdm845-cpufreq-hw - qcom,sm6115-cpufreq-hw - qcom,sm6350-cpufreq-hw + - qcom,sm7250-cpufreq-hw - qcom,sm8150-cpufreq-hw - const: qcom,cpufreq-hw
Signature · 1 line
2.43.0
PATCH v5 13/13 arm64: dts: qcom: Add SM7250 devicetree file
In reply to Sreeshankar KAdd base devicetree file for SM7250 SoC.
This file adds the basic nodes like cpu, psci and other required configuration for booting up to the serial console.
--- arch/arm64/boot/dts/qcom/sm7250.dtsi | 771 +++++++++++++++++++++++++++ 1 file changed, 771 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm7250.dtsi
arch/arm64/boot/dts/qcom/sm7250.dtsi new file +771 -0
@@ -0,0 +1,771 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2026, Sreeshankar K <[email protected]> + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm7250-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom,rpmhpd.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <38400000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo475"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd0>; + power-domain-names = "psci"; + #cooling-cells = <2>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; + next-level-cache = <&l3_0>; + + l3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-size = <0x200000>; + cache-unified; + }; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo475"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd1>; + power-domain-names = "psci"; + #cooling-cells = <2>; + + l2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo475"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd2>; + power-domain-names = "psci"; + #cooling-cells = <2>; + + l2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo475"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd3>; + power-domain-names = "psci"; + #cooling-cells = <2>; + + l2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo475"; + reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_400>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd4>; + power-domain-names = "psci"; + #cooling-cells = <2>; + + l2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo475"; + reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_500>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd5>; + power-domain-names = "psci"; + #cooling-cells = <2>; + + l2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x20000>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo475"; + reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + capacity-dmips-mhz = <1740>; + dynamic-power-coefficient = <341>; + next-level-cache = <&l2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&cpu_pd6>; + power-domain-names = "psci"; + #cooling-cells = <2>; + + l2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x40000>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo475"; + reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; + enable-method = "psci"; + capacity-dmips-mhz = <1740>; + dynamic-power-coefficient = <375>; + next-level-cache = <&l2_700>; + qcom,freq-domain = <&cpufreq_hw 2>; + power-domains = <&cpu_pd7>; + power-domain-names = "psci"; + #cooling-cells = <2>; + + l2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + }; + + cluster1 { + core6 { + cpu = <&cpu6>; + }; + }; + + cluster2 { + core7 { + cpu = <&cpu7>; + }; + }; + }; + + domain-idle-states { + cluster_sleep_pc: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + cluster_sleep_cx: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001244>; + entry-latency-us = <3638>; + exit-latency-us = <4562>; + min-residency-us = <8467>; + }; + + cluster_sleep_aoss: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b244>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9826>; + }; + }; + + idle-states { + entry-method = "psci"; + + little_cpu_sleep_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + little_cpu_sleep_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + big_cpu_sleep_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + big_cpu_sleep_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm7250", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0>, + <&little_cpu_sleep_1>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0>, + <&little_cpu_sleep_1>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0>, + <&little_cpu_sleep_1>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0>, + <&little_cpu_sleep_1>; + }; + + cpu_pd4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0>, + <&little_cpu_sleep_1>; + }; + + cpu_pd5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0>, + <&little_cpu_sleep_1>; + }; + + cpu_pd6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0>, + <&big_cpu_sleep_1>; + }; + + cpu_pd7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0>, + <&big_cpu_sleep_1>; + }; + + cluster_pd: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_sleep_pc>, + <&cluster_sleep_cx>, + <&cluster_sleep_aoss>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@80700000 { + reg = <0x0 0x80700000 0x0 0x160000>; + no-map; + }; + + cmd_db: cmd-db@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + + xbl_uefi_mem: xbl-uefi@80880000 { + reg = <0 0x80880000 0 0x14000>; + no-map; + }; + + smem_mem: smem@80900000 { + compatible = "qcom,smem"; + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + removed_mem: removed@80b00000 { + reg = <0x0 0x80b00000 0x0 0x1300000>; + no-map; + }; + + camera_mem: camera@86000000 { + reg = <0x0 0x86000000 0x0 0x500000>; + no-map; + }; + + npu_mem: npu@86500000 { + reg = <0x0 0x86500000 0x0 0x500000>; + no-map; + }; + + video_mem: video@86a00000 { + reg = <0x0 0x86a00000 0x0 0x500000>; + no-map; + }; + + cdsp_mem: cdsp@87400000 { + reg = <0x0 0x87400000 0x0 0x1e00000>; + no-map; + }; + + adsp_mem: adsp@89200000 { + reg = <0x0 0x89200000 0x0 0x2800000>; + no-map; + }; + + wlan_fw_mem: wlan-fw@8ba00000 { + reg = <0x0 0x8ba00000 0x0 0x200000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8bc10000 { + reg = <0x0 0x8bc10000 0x0 0x5400>; + no-map; + }; + + gpu_mem: gpu@8bc15400 { + reg = <0x0 0x8bc15400 0x0 0x2000>; + no-map; + }; + + modem_wlan_mem: modem-wlan@8c000000 { + reg = <0x0 0x8c000000 0x0 0xf800000>; + no-map; + }; + + cdsp_sec_mem: cdsp-sec@9f400000 { + reg = <0x0 0x9f400000 0x0 0xc00000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,sm7250-gcc"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_CX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qupv3_id_1: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart2: serial@988000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm7250-pdc", "qcom,pdc"; + reg = <0 0xb220000 0 0x30000>, <0 0x17c000f0 0 0x60>; + qcom,pdc-ranges = <0 480 42>, + <42 612 28>, + <70 63 1>, + <71 640 15>, + <86 522 52>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + power-domains = <&cluster_pd>; + + rpmhcc: clock-controller { + compatible = "qcom,sm7250-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm7250-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,sm7250-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1000>, + <0 0x18325800 0 0x1000>, + <0 0x18327800 0 0x1000>; + reg-names = "freq-domain0", + "freq-domain1", + "freq-domain2"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x0 0x17c20000 0x0 0x1000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c27000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; +};
Signature · 1 line
2.43.0