Skip to contentSkip to conversation

FAILED: patch "[PATCH] HID: uclogic: fix use-after-free of inrange_timer on remove" failed to apply to 5.15-stable tree

PATCH New [email protected] 2 participants 2 messages Aug 25 – Aug 26

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 506fd50a9027340f0e9dcc587d10ccb03312dba6
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026082557-kindling-coping-1767@gregkh' --subject-prefix 'PATCH 5.15.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 506fd50a9027340f0e9dcc587d10ccb03312dba6 Mon Sep 17 00:00:00 2001
From: Ibrahim Hashimov <[email protected]>
Date: Tue, 14 Jul 2026 19:39:46 +0200
Subject: [PATCH] HID: uclogic: fix use-after-free of inrange_timer on remove

uclogic_remove() cancels the pen in-range timer and then stops the device:

	timer_delete_sync(&drvdata->inrange_timer);
	hid_hw_stop(hdev);

timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer:

	mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100));

A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context.

Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs.

Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the timer, waits for a running callback while pen_input is still valid, and prevents any further re-arming -- a later mod_timer() from an in-flight report is silently ignored -- so the timer is provably dead before hid_hw_stop() frees the inputs. This is the ordering the timer core documents for this "timer re-armed from another path" teardown case.

Fixes 01309e29eb95 ("HID: uclogic: Support in-range reporting emulation")
Assisted-by AuditCode-AI:2026.07
drivers/hid/hid-uclogic-core.c +11 -1
index b73f09d26688..0b8a83fa6c5b 100644
@@ -548,7 +548,17 @@ static void uclogic_remove(struct hid_device *hdev)
 {
 	struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
 
-	timer_delete_sync(&drvdata->inrange_timer);
+	/*
+	 * Shut the in-range timer down before stopping the device.
+	 * uclogic_raw_event_pen() re-arms inrange_timer on every pen report
+	 * and keeps running until hid_hw_stop() stops the transport, so a
+	 * plain timer_delete_sync() here can be undone by a report landing in
+	 * the window before hid_hw_stop().  timer_shutdown_sync() cancels the
+	 * timer and makes any later re-arm a no-op, so it is provably dead
+	 * before hid_hw_stop() frees the input device drvdata->pen_input
+	 * points at.
+	 */
+	timer_shutdown_sync(&drvdata->inrange_timer);
 	hid_hw_stop(hdev);
 	kfree(drvdata->desc_ptr);
 	uclogic_params_cleanup(&drvdata->params);
maintainer
#1 lore raw

PATCH 1/1 HID: uclogic: fix use-after-free of inrange_timer on remove

From: Ibrahim Hashimov <[email protected]>

[ Upstream commit 506fd50a9027340f0e9dcc587d10ccb03312dba6 ]

uclogic_remove() cancels the pen in-range timer and then stops the device:

	timer_delete_sync(&drvdata->inrange_timer);
	hid_hw_stop(hdev);

timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer:

	mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100));

A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context.

Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs.

Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the timer, waits for a running callback while pen_input is still valid, and prevents any further re-arming -- a later mod_timer() from an in-flight report is silently ignored -- so the timer is provably dead before hid_hw_stop() frees the inputs. This is the ordering the timer core documents for this "timer re-armed from another path" teardown case.

Fixes 01309e29eb95 ("HID: uclogic: Support in-range reporting emulation")
Assisted-by AuditCode-AI:2026.07
[ changed timer_delete_sync() to del_timer_sync() in the removed line to match the pre-rename API on this branch ]
---
 drivers/hid/hid-uclogic-core.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/hid/hid-uclogic-core.c +11 -1
index 340f92cfc812e..5cc0742ac38b3 100644
@@ -346,7 +346,17 @@ static void uclogic_remove(struct hid_device *hdev)
 {
 	struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
 
-	del_timer_sync(&drvdata->inrange_timer);
+	/*
+	 * Shut the in-range timer down before stopping the device.
+	 * uclogic_raw_event_pen() re-arms inrange_timer on every pen report
+	 * and keeps running until hid_hw_stop() stops the transport, so a
+	 * plain timer_delete_sync() here can be undone by a report landing in
+	 * the window before hid_hw_stop().  timer_shutdown_sync() cancels the
+	 * timer and makes any later re-arm a no-op, so it is provably dead
+	 * before hid_hw_stop() frees the input device drvdata->pen_input
+	 * points at.
+	 */
+	timer_shutdown_sync(&drvdata->inrange_timer);
 	hid_hw_stop(hdev);
 	kfree(drvdata->desc_ptr);
 	uclogic_params_cleanup(&drvdata->params);
Signature · 1 line
2.53.0