Skip to contentSkip to conversation

FAILED: patch "[PATCH] HID: magicmouse: do not keep a stale msc->input if no input" failed to apply to 5.10-stable tree

PATCH New [email protected] 2 participants 2 messages Aug 25 – Aug 26

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 0af3b89705688af01aa06025b84fa7a1e06ba6cc
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026082503-contort-glorified-efe1@gregkh' --subject-prefix 'PATCH 5.10.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0af3b89705688af01aa06025b84fa7a1e06ba6cc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jose=20Villase=C3=B1or=20Montfort?= <[email protected]>
Date: Tue, 28 Jul 2026 22:15:57 -0600
Subject: [PATCH] HID: magicmouse: do not keep a stale msc->input if no input
is claimed
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered.

That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input.

The failure does not abort the probe. hid_connect() only skips the claim:

	if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev,
				connect_mask & HID_CONNECT_HIDINPUT_FORCE))
		hdev->claimed |= HID_CLAIMED_INPUT;

and the "device has no listeners" bailout below it does not fire for this driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad 2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore returns 0 and magicmouse_probe() continues with msc->input pointing at freed memory. Being non-NULL, it passes the "input not registered" check in probe and the NULL checks in ->raw_event and ->event, so the next input report dereferences freed memory.

Clear msc->input when the HID core did not claim an input device, so the existing NULL checks cover this case as well.

drivers/hid/hid-magicmouse.c +10 -0
index 97562765a01d..d2f95658a383 100644
@@ -915,6 +915,16 @@ static int magicmouse_probe(struct hid_device *hdev,
 		return ret;
 	}
 
+	/*
+	 * When hidinput_connect() fails it frees every input device it
+	 * created, but that does not fail hid_hw_start(): the core simply
+	 * does not claim an input. msc->input, cached in ->input_mapping
+	 * while the report descriptor was parsed, would then be a dangling
+	 * pointer that passes every NULL check. Trust the core's claim.
+	 */
+	if (!(hdev->claimed & HID_CLAIMED_INPUT))
+		msc->input = NULL;
+
 	if (is_usb_magicmouse2(id->vendor, id->product) ||
 	    is_usb_magictrackpad2(id->vendor, id->product)) {
 		timer_setup(&msc->battery_timer, magicmouse_battery_timer_tick, 0);
maintainer
#1 lore raw

PATCH 1/1 HID: magicmouse: do not keep a stale msc->input if no input is claimed

From: Jose Villaseñor Montfort <[email protected]>

[ Upstream commit 0af3b89705688af01aa06025b84fa7a1e06ba6cc ]

magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered.

That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input.

The failure does not abort the probe. hid_connect() only skips the claim:

	if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev,
				connect_mask & HID_CONNECT_HIDINPUT_FORCE))
		hdev->claimed |= HID_CLAIMED_INPUT;

and the "device has no listeners" bailout below it does not fire for this driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad 2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore returns 0 and magicmouse_probe() continues with msc->input pointing at freed memory. Being non-NULL, it passes the "input not registered" check in probe and the NULL checks in ->raw_event and ->event, so the next input report dereferences freed memory.

Clear msc->input when the HID core did not claim an input device, so the existing NULL checks cover this case as well.

---
 drivers/hid/hid-magicmouse.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/hid/hid-magicmouse.c +10 -0
index afde78319b996..e39e32680feee 100644
@@ -627,6 +627,16 @@ static int magicmouse_probe(struct hid_device *hdev,
 		return ret;
 	}
 
+	/*
+	 * When hidinput_connect() fails it frees every input device it
+	 * created, but that does not fail hid_hw_start(): the core simply
+	 * does not claim an input. msc->input, cached in ->input_mapping
+	 * while the report descriptor was parsed, would then be a dangling
+	 * pointer that passes every NULL check. Trust the core's claim.
+	 */
+	if (!(hdev->claimed & HID_CLAIMED_INPUT))
+		msc->input = NULL;
+
 	if (!msc->input) {
 		hid_err(hdev, "magicmouse input not registered\n");
 		ret = -ENOMEM;
Signature · 1 line
2.53.0