Skip to contentSkip to conversation

platform/x86: hp-wmi: Add OMEN board 8D40 thermal profile support

PATCH In review Suryansh Singh 2 participants 2 messages Aug 27 – Sep 18 x86 platform drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 platform/x86: hp-wmi: Add OMEN board 8D40 thermal profile support

The HP OMEN Slim 16t-an000 (board ID: 8D40) uses the existing OMEN v1 WMI interface but does not use the standard EC thermal profile parameters.

Furthermore, it is the closest sibling of board 8D41 and 8D42, which are already included in the table with omen_v1_no_ec_board_params.

Add the DMI board name to hp_wmi_feature_boards[] and map it to omen_v1_no_ec_board_params.

This enables the existing board-specific handling for 8D40, including platform profile and fan control support.

(Tested-by tag not included due to invalid email address.)

---
 drivers/platform/x86/hp/hp-wmi.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/platform/x86/hp/hp-wmi.c +4 -0
index 6ecc033e5af3..fba6d202672a 100644
@@ -323,6 +323,10 @@ static const struct dmi_system_id hp_wmi_feature_boards[] __initconst = {
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8D26") },
 		.driver_data = (void *)&omen_v1_legacy_board_params,
 	},
+	{
+		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8D40") },
+		.driver_data = (void *)&omen_v1_no_ec_board_params,
+	},
 	{
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8D41") },
 		.driver_data = (void *)&omen_v1_no_ec_board_params,
Signature · 1 line
2.55.0
maintainer
#1 lore raw
Quoted 9 lines · Suryansh Singh

The HP OMEN Slim 16t-an000 (board ID: 8D40) uses the existing OMEN v1 WMI interface but does not use the standard EC thermal profile parameters.

Furthermore, it is the closest sibling of board 8D41 and 8D42, which are already included in the table with omen_v1_no_ec_board_params.

[...]

Thank you for your contribution, it has been applied to my local review-ilpo-next branch. Note it will show up in the public platform-drivers-x86/review-ilpo-next branch only once I've pushed my local branch there, which might take a while.

FYI [if applicable to your patch], as per Linus' policy change, also fixes are mostly routed through for-next unless the fix is for a commit introduced in the most recent cycle or is clearly a regression fix.

The list of commits applied:
[1/1] platform/x86: hp-wmi: Add OMEN board 8D40 thermal profile support

      commit: 162053ad8885a351140b2128e67fb5a53ab1c2d5

--
i.