platform/x86: hp-wmi: Add support for Omen 16-am0xxx (8D3F)
PATCH 1/1 platform/x86: hp-wmi: Add support for Omen 16-am0xxx (8D3F)
The HP Omen 16-am0xxx (board ID: 8D3F) has the same WMI interface as other Victus S boards, but requires quirks for correctly switching thermal profile.
Add the DMI board name to hp_wmi_feature_boards[] table and map it to omen_v1_legacy_board_params.
Testing on board 8D3F confirmed that platform profile is registered successfully and fan RPMs are readable and controllable.
--- drivers/platform/x86/hp/hp-wmi.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/platform/x86/hp/hp-wmi.c +4 -0
@@ -323,6 +323,10 @@ static const struct dmi_system_id hp_wmi_feature_boards[] __initconst = { .matches = { DMI_MATCH(DMI_BOARD_NAME, "8D26") }, .driver_data = (void *)&omen_v1_legacy_board_params, }, + { + .matches = { DMI_MATCH(DMI_BOARD_NAME, "8D3F") }, + .driver_data = (void *)&omen_v1_legacy_board_params, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "8D41") }, .driver_data = (void *)&omen_v1_no_ec_board_params,
Signature · 1 line
2.55.0
Ilpo Järvinen
maintainerQuoted 8 lines · Krishna Chomal
The HP Omen 16-am0xxx (board ID: 8D3F) has the same WMI interface as other Victus S boards, but requires quirks for correctly switching thermal profile.
Add the DMI board name to hp_wmi_feature_boards[] table and map it to
omen_v1_legacy_board_params.[...]
Thank you for your contribution, it has been applied to my local review-ilpo-next branch. Note it will show up in the public platform-drivers-x86/review-ilpo-next branch only once I've pushed my local branch there, which might take a while.
FYI [if applicable to your patch], as per Linus' policy change, also fixes are mostly routed through for-next unless the fix is for a commit introduced in the most recent cycle or is clearly a regression fix.
The list of commits applied:
[1/1] platform/x86: hp-wmi: Add support for Omen 16-am0xxx (8D3F)
commit: 231fa63e36dd6437741547ff63ab52fbe4bd4615
--
i.