ARM: dts: helios4: add #phy-cells to USB nop phys
Subsystems (2)
PATCH 1/1 ARM: dts: helios4: add #phy-cells to USB nop phys
The usb-nop-xceiv binding requires a #phy-cells property; without it dtbs_check reports:
usb2-phy: '#phy-cells' is a required property (usb-nop-xceiv)
usb3-phy: '#phy-cells' is a required property (usb-nop-xceiv)
Add #phy-cells = <0> to both nodes. No functional change.
Assisted-by opencode:big-pickle
Signed-off-by Rosen Penev <[email protected]>
--- arch/arm/boot/dts/marvell/armada-388-helios4.dts | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/boot/dts/marvell/armada-388-helios4.dts +2 -0
@@ -141,10 +141,12 @@ fan2: j17-pwm { usb2_phy: usb2-phy { compatible = "usb-nop-xceiv"; vbus-supply = <®_5p0v_usb>; + #phy-cells = <0>; }; usb3_phy: usb3-phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; soc {
Signature · 1 line
2.55.0
Gregory CLEMENT
maintainerQuoted 10 lines · Rosen Penev
The usb-nop-xceiv binding requires a #phy-cells property; without it
dtbs_checkreports:usb2-phy: '#phy-cells' is a required property (usb-nop-xceiv)
usb3-phy: '#phy-cells' is a required property (usb-nop-xceiv)Add #phy-cells = <0> to both nodes. No functional change.
Assisted-by opencode:big-pickleSigned-off-by Rosen Penev <[email protected]>
Applied on mvebu/dt
Thanks,
Gregory
Quoted 24 lines
--- arch/arm/boot/dts/marvell/armada-388-helios4.dts | 2 ++ 1 file changed, 2 insertions(+)arch/arm/boot/dts/marvell/armada-388-helios4.dts +2
-0@@ -141,10 +141,12 @@ fan2: j17-pwm { usb2_phy: usb2-phy { compatible = "usb-nop-xceiv"; vbus-supply = <®_5p0v_usb>; + #phy-cells = <0>; }; usb3_phy: usb3-phy { compatible = "usb-nop-xceiv"; + #phy-cells = <0>; }; soc {Signature · 1 line
2.55.0
Signature · 3 lines
Grégory CLEMENT, Bootlin Embedded Linux and Kernel engineering https://bootlin.com