Bluetooth: btusb: Add USB ID 13d3:3556 for RTL8821CE
PATCH 1/1 Bluetooth: btusb: Add USB ID 13d3:3556 for RTL8821CE
The onboard Realtek RTL8821CE combo card on the ASUS PRIME B550-PLUS AC-HES presents its Bluetooth function as USB ID 13d3:3556. This ID is missing from quirks_table, so btusb matches the device only through the generic Bluetooth class entry in btusb_table and driver_info stays zero. BTUSB_REALTEK is therefore never set, btrtl never runs, and the controller keeps executing its on-chip ROM firmware instead of loading rtl_bt/rtl8821c_fw.bin and rtl_bt/rtl8821c_config.bin.
In that state BLE HID peripherals are unusable. A HHKB Hybrid keyboard pairs and enumerates as a HID device, then the link drops within 10-30 seconds, repeatedly. The same keyboard is stable on the same host under other operating systems.
Adding the ID lets btusb run the Realtek setup path:
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
Bluetooth: hci0: RTL: rom_version status=0 version=1
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin
Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin
Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926
Bluetooth: hci0: RTL: fw version 0x75b8f098
With the firmware loaded the same keyboard has stayed connected for over 11 hours without a single drop.
Device descriptor:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3556 Rev=01.10 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -511,6 +511,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3533), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3556), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3558), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH },
base-commit: 6696072ffe07205255cf83621a95a1aa2f9f6e62
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1157292
---Test result---
Test Summary:
CheckPatch FAIL 0.77 seconds VerifyFixes PASS 0.14 seconds VerifySignedoff PASS 0.14 seconds GitLint FAIL 0.34 seconds SubjectPrefix PASS 0.14 seconds BuildKernel PASS 26.91 seconds CheckAllWarning PASS 29.31 seconds CheckSparse PASS 28.62 seconds BuildKernel32 PASS 25.88 seconds CheckKernelLLVM SKIP 0.00 seconds TestRunnerSetup PASS 475.44 seconds IncrementalBuild PASS 25.71 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
Bluetooth: btusb: Add USB ID 13d3:3556 for RTL8821CE
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?) #112:
Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821
total: 0 errors, 1 warnings, 8 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/patch/14788283.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
Bluetooth: btusb: Add USB ID 13d3:3556 for RTL8821CE
18: B1 Line exceeds max length (84>80): " Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821" 33: B2 Line has trailing whitespace: "S: Manufacturer=Realtek "
34: B2 Line has trailing whitespace: "S: Product=Bluetooth Radio "
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found
https://github.com/bluez/bluetooth-next/pull/698
---
Regards,
Linux Bluetooth
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 9 lines · On Thu, 3 Sep 2026 10:03:22 -0700 you wrote:
The onboard Realtek RTL8821CE combo card on the ASUS PRIME B550-PLUS AC-HES presents its Bluetooth function as USB ID 13d3:3556. This ID is missing from
quirks_table, so btusb matches the device only through the generic Bluetooth class entry inbtusb_tableanddriver_infostays zero.BTUSB_REALTEKis therefore never set, btrtl never runs, and the controller keeps executing its on-chip ROM firmware instead of loading rtl_bt/rtl8821c_fw.bin and rtl_bt/rtl8821c_config.bin.[...]
Here is the summary with links:
- Bluetooth: btusb: Add USB ID 13d3:3556 for RTL8821CE
https://git.kernel.org/bluetooth/bluetooth-next/c/88a6bc5607e2
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html