Dynamic PAMT
Subsystems (5)
Rick Edgecombe
maintainerv11 cover Dynamic PAMT
Hi,
This is a quick v11 of the Dynamic PAMT TDX series, to fix the two minor issues. The main change is to remove the kernel parameter, and go back to essentially a v5 version of patch 9. The other tiny change is correct the __maybe_unused ordering noise that came from applying a change to the wrong patch.
Differences from v10 are simply:
Documentation/admin-guide/kernel-parameters.txt +0 -10
@@ -7582,16 +7582,6 @@ Kernel parameters tdfx= [HW,DRM] - tdx_dpamt= - [X86] Controls whether TDX will use Dynamic PAMT - to save memory, when supported. - - Valid parameters: "on", "off" - Default: "off" - - For details see: - Documentation/arch/x86/tdx.rst - test_suspend= [SUSPEND] Format: { "mem" | "standby" | "freeze" }[,N] Specify "mem" (for Suspend-to-RAM) or "standby" (for
Documentation/arch/x86/tdx.rst +1 -7
@@ -219,13 +219,7 @@ When Dynamic PAMT is in use, dmesg shows it like:: [..] virt/tdx: 10092 KB allocated for PAMT [..] virt/tdx: TDX-Module initialized -Dynamic PAMT is only enabled when supported and the ``tdx_dpamt=`` kernel -parameter is set to "on". The feature is off by default because TDX module -internal details prevent Dynamic PAMT from working on all keyid partitioning -configurations. When the TDX module is fixed to include these constraints in -its enumeration of Dynamic PAMT support, kernel support can be changed to -default on. For more information, consult the Intel TDX documentation about -Dynamic PAMT. +Dynamic PAMT is enabled automatically if supported. TDX Interaction to Other Kernel Components ------------------------------------------
arch/x86/virt/vmx/tdx/tdx.c +0 -12
@@ -50,8 +50,6 @@/* Number of DPAMT pages to be provided to TDX module per 2MB region of PA */ #define TDX_DPAMT_ENTRY_PAGE_CNT 2 -static bool tdx_enable_dpamt__ro_after_init ; -struct tdx_module_state {bool initialized;bool sysinit_done;
@@ -2056,9 +2054,6 @@ EXPORT_SYMBOL_FOR_KVM(tdh_phymem_page_wbinvd_hkid);bool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo) { -if (!tdx_enable_dpamt) -return false; -return sysinfo->features.tdx_features0 &TDX_FEATURES0_DYNAMIC_PAMT ; }EXPORT_SYMBOL_FOR_KVM (tdx_supports_dynamic_pamt);
@@ -2334,13 +2329,6 @@ void tdx_free_control_page(struct page *page) }EXPORT_SYMBOL_FOR_KVM (tdx_free_control_page); -static int __init tdx_dpamt_setup (char *str) -{ -return kstrtobool (str, &tdx_enable_dpamt) ==0 ; -} - -__setup ("tdx_dpamt=" , tdx_dpamt_setup); -void tdx_sys_disable (void ) {struct tdx_module_args args = {};
Remaining patches without Dave's RB:
[PATCH 04/11] x86/virt/tdx: Allocate refcounts for Dynamic PAMT memory [PATCH 09/11] x86/virt/tdx: Enable Dynamic PAMT
[PATCH 10/11] Documentation/x86: Add documentation for TDX's Dynamic PAMT
Background
==========
Dynamic PAMT is a TDX feature that allows saving memory by allocating some of its page tracking metadata dynamically, instead of statically at boot. These static allocations take roughly 0.4% of system memory. The savings are variable depending on system and TDX usage, but could be up to 100x. For more Dynamic PAMT background, please refer to [0]. For more analysis of the savings in different scenarios, see the v6 coverleter[1].
It occurred to me that since the Dynamic PAMT effort began, RAM has become much more expensive. Consequently, this feature is even more valuable now. It would be good to enable it for TDX users.
Base
====
This is based on v7.3-rc1. A branch of this series can be found here: [2].
Testing
=======
I just did some regression testing with our standard automated testing for this one. I left Tested-by tags per Hongyu's preference.
[0] https://lore.kernel.org/lkml/[email protected]/
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://github.com/intel-staging/tdx/tree/dpamt_v11
Kiryl Shutsemau (2):
KVM: TDX: Allocate PAMT memory for TD and vCPU control structures
KVM: TDX: Get/put PAMT pages when (un)mapping private memory
Rick Edgecombe (9):
x86/virt/tdx: Simplify PAMT layout calculation x86/virt/tdx: Allocate page bitmap for Dynamic PAMT x86/virt/tdx: Add __tdx_pamt_get/put() helpers x86/virt/tdx: Allocate refcounts for Dynamic PAMT memory x86/virt/tdx: Handle multiple callers in tdx_pamt_get/put() x86/virt/tdx: Add APIs to support Dynamic PAMT ops from KVM's fault
path
x86/virt/tdx: Enable Dynamic PAMT
Documentation/x86: Add documentation for TDX's Dynamic PAMT x86/virt/tdx: Optimize tdx_pamt_get/put()
Documentation/arch/x86/tdx.rst | 21 + arch/x86/include/asm/kvm-x86-ops.h | 1 + arch/x86/include/asm/kvm_host.h | 1 + arch/x86/include/asm/tdx.h | 23 + arch/x86/include/asm/tdx_global_metadata.h | 9 +- arch/x86/kvm/mmu/mmu.c | 4 + arch/x86/kvm/vmx/tdx.c | 99 +++-- arch/x86/kvm/vmx/tdx.h | 2 + arch/x86/virt/vmx/tdx/tdx.c | 448 +++++++++++++++++--- arch/x86/virt/vmx/tdx/tdx.h | 2 + arch/x86/virt/vmx/tdx/tdx_global_metadata.c | 23 +- 11 files changed, 538 insertions(+), 95 deletions(-)
Signature · 1 line
2.55.0
Rick Edgecombe
maintainerPATCH v11 1/11 x86/virt/tdx: Simplify PAMT layout calculation
For each memory region that the TDX module might use (called TDMR), three separate traditional PAMT allocations are needed. There is one for each supported page size (1GB, 2MB, 4KB). These store information on each page in the TDMR. In Linux, they are allocated out of one physically contiguous block, in order to more efficiently use some internal TDX module bookkeeping resources. So some simple math is needed to break the single large allocation into three smaller allocations for each page size.
There are some commonalities in the math needed to calculate the base and size for each smaller allocation, and so an effort was made to share logic across the three. Unfortunately doing this turned out unnaturally tortured, with a loop iterating over the three page sizes, only to call into a function with case statements for each page size. In the future Dynamic PAMT will add more logic that is special to the 4KB page size, making the benefit of the math sharing even more questionable.
Three is not a very high number, so get rid of the loop and just duplicate the small calculation three times. In doing so, setup for future Dynamic PAMT changes.
Since the loop that iterates over it is gone, further simplify the code by dropping the array of intermediate size and base storage. Just store the values to their final locations.
AI was used under supervision to collect/apply feedback, review code and workshop logs.
---
v10:
- Fix whitespace change in tdmrs_set_up_pamt_all() (AI nit checker)
v8:
- Fix PAMT capitalization in comment (Sohil)
- Delete stale info in log, that Chao mentioned last time (Binbin)
v7:
- Remove accidental whitespace changes (Kiryl)
- Drop stale sentence in log (Chao)
- Better patch subject (Yan)
- Drop Assisted-by tag and cover AI use in log (Dave)
--- arch/x86/virt/vmx/tdx/tdx.c | 90 ++++++++++++------------------------- 1 file changed, 28 insertions(+), 62 deletions(-)
arch/x86/virt/vmx/tdx/tdx.c +28 -62
@@ -514,31 +514,21 @@ static __init int fill_out_tdmrs(struct list_head *tmb_list,* Calculate PAMT size given a TDMR and a page size. The returned * PAMT size is always aligned up to 4K page boundary. */ -static __init unsigned long tdmr_get_pamt_sz (struct tdmr_info *tdmr,int pgsz, -u16 pamt_entry_size) +static __init unsigned long tdmr_get_pamt_sz (struct tdmr_info *tdmr,int pgsz) {unsigned long pamt_sz, nr_pamt_entries; +const int tdx_pg_size_shift[TDX_PS_NR ] = {PAGE_SHIFT ,PMD_SHIFT ,PUD_SHIFT }; +const u16 pamt_entry_size[TDX_PS_NR ] = { + tdx_sysinfo.tdmr.pamt_4k_entry_size, + tdx_sysinfo.tdmr.pamt_2m_entry_size, + tdx_sysinfo.tdmr.pamt_1g_entry_size, + }; -switch (pgsz) { -case TDX_PS_4K : - nr_pamt_entries = tdmr->size >>PAGE_SHIFT ; -break ; -case TDX_PS_2M : - nr_pamt_entries = tdmr->size >>PMD_SHIFT ; -break ; -case TDX_PS_1G : - nr_pamt_entries = tdmr->size >>PUD_SHIFT ; -break ; -default : -WARN_ON_ONCE (1 ); -return 0 ; - } + nr_pamt_entries = tdmr->size >> tdx_pg_size_shift[pgsz]; + pamt_sz = nr_pamt_entries * pamt_entry_size[pgsz]; - pamt_sz = nr_pamt_entries * pamt_entry_size;/* TDX requires PAMT size must be 4K aligned */ - pamt_sz =ALIGN (pamt_sz,PAGE_SIZE ); - -return pamt_sz; +return PAGE_ALIGN (pamt_sz); }/*
@@ -576,15 +566,11 @@ static __init int tdmr_get_nid(struct tdmr_info *tdmr, struct list_head *tmb_lis* within @tdmr, and set up PAMTs for @tdmr. */ static __init int tdmr_set_up_pamt (struct tdmr_info *tdmr, -struct list_head *tmb_list, -u16 pamt_entry_size[]) +struct list_head *tmb_list) { -unsigned long pamt_base[TDX_PS_NR ]; -unsigned long pamt_size[TDX_PS_NR ]; -unsigned long tdmr_pamt_base;unsigned long tdmr_pamt_size;struct page *pamt; -int pgsz, nid; +int nid; nid =tdmr_get_nid (tdmr, tmb_list);
@@ -592,12 +578,10 @@ static __init int tdmr_set_up_pamt(struct tdmr_info *tdmr,* Calculate the PAMT size for each TDX supported page size * and the total PAMT size. */ - tdmr_pamt_size =0 ; -for (pgsz =TDX_PS_4K ; pgsz <TDX_PS_NR ; pgsz++) { - pamt_size[pgsz] =tdmr_get_pamt_sz (tdmr, pgsz, - pamt_entry_size[pgsz]); - tdmr_pamt_size += pamt_size[pgsz]; - } + tdmr->pamt_4k_size =tdmr_get_pamt_sz (tdmr,TDX_PS_4K ); + tdmr->pamt_2m_size =tdmr_get_pamt_sz (tdmr,TDX_PS_2M ); + tdmr->pamt_1g_size =tdmr_get_pamt_sz (tdmr,TDX_PS_1G ); + tdmr_pamt_size = tdmr->pamt_4k_size + tdmr->pamt_2m_size + tdmr->pamt_1g_size;/* * Allocate one chunk of physically contiguous memory for all
@@ -606,25 +590,17 @@ static __init int tdmr_set_up_pamt(struct tdmr_info *tdmr,*/ pamt =alloc_contig_pages (tdmr_pamt_size >>PAGE_SHIFT ,GFP_KERNEL , nid, &node_online_map); + +/* +* tdmr->pamt_4k_base is still zero so the error +* path of the caller will skip freeing the PAMT. +*/ if (!pamt)return -ENOMEM ; -/* -* Break the contiguous allocation back up into the -* individual PAMTs for each page size. -*/ - tdmr_pamt_base =page_to_pfn (pamt) <<PAGE_SHIFT ; -for (pgsz =TDX_PS_4K ; pgsz <TDX_PS_NR ; pgsz++) { - pamt_base[pgsz] = tdmr_pamt_base; - tdmr_pamt_base += pamt_size[pgsz]; - } - - tdmr->pamt_4k_base = pamt_base[TDX_PS_4K ]; - tdmr->pamt_4k_size = pamt_size[TDX_PS_4K ]; - tdmr->pamt_2m_base = pamt_base[TDX_PS_2M ]; - tdmr->pamt_2m_size = pamt_size[TDX_PS_2M ]; - tdmr->pamt_1g_base = pamt_base[TDX_PS_1G ]; - tdmr->pamt_1g_size = pamt_size[TDX_PS_1G ]; + tdmr->pamt_4k_base =page_to_phys (pamt); + tdmr->pamt_2m_base = tdmr->pamt_4k_base + tdmr->pamt_4k_size; + tdmr->pamt_1g_base = tdmr->pamt_2m_base + tdmr->pamt_2m_size;return 0 ; }
@@ -655,10 +631,7 @@ static __init void tdmr_do_pamt_func(struct tdmr_info *tdmr,tdmr_get_pamt (tdmr, &pamt_base, &pamt_size);/* Do nothing if PAMT hasn't been allocated for this TDMR */ -if (!pamt_size) -return ; - -if (WARN_ON_ONCE (!pamt_base)) +if (!pamt_base)return ;pamt_func (pamt_base, pamt_size);
@@ -684,14 +657,12 @@ static __init void tdmrs_free_pamt_all(struct tdmr_info_list *tdmr_list)/* Allocate and set up PAMTs for all TDMRs */ static __init int tdmrs_set_up_pamt_all (struct tdmr_info_list *tdmr_list, -struct list_head *tmb_list, -u16 pamt_entry_size[]) +struct list_head *tmb_list) {int i, ret =0 ;for (i =0 ; i < tdmr_list->nr_consumed_tdmrs; i++) { - ret =tdmr_set_up_pamt (tdmr_entry (tdmr_list, i), tmb_list, - pamt_entry_size); + ret =tdmr_set_up_pamt (tdmr_entry (tdmr_list, i), tmb_list);if (ret) goto err; }
@@ -968,18 +939,13 @@ static __init int construct_tdmrs(struct list_head *tmb_list,struct tdmr_info_list *tdmr_list, struct tdx_sys_info_tdmr *sysinfo_tdmr) { - u16 pamt_entry_size[TDX_PS_NR] = { - sysinfo_tdmr->pamt_4k_entry_size, - sysinfo_tdmr->pamt_2m_entry_size, - sysinfo_tdmr->pamt_1g_entry_size, - }; int ret; ret =fill_out_tdmrs (tmb_list, tdmr_list);if (ret)return ret; - ret =tdmrs_set_up_pamt_all (tdmr_list, tmb_list, pamt_entry_size); + ret =tdmrs_set_up_pamt_all (tdmr_list, tmb_list);if (ret)return ret;
Signature · 1 line
2.55.0
[tip: x86/tdx] x86/virt/tdx: Simplify PAMT layout calculation
The following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: 01a43c55ae5f00601ef7877dd86b873770b9efe9 Gitweb: https://git.kernel.org/tip/01a43c55ae5f00601ef7877dd86b873770b9efe9 Author: Rick Edgecombe <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:31 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:01 -07:00
x86/virt/tdx: Simplify PAMT layout calculation
For each memory region that the TDX module might use (called TDMR), three separate traditional PAMT allocations are needed. There is one for each supported page size (1GB, 2MB, 4KB). These store information on each page in the TDMR. In Linux, they are allocated out of one physically contiguous block, in order to more efficiently use some internal TDX module bookkeeping resources. So some simple math is needed to break the single large allocation into three smaller allocations for each page size.
There are some commonalities in the math needed to calculate the base and size for each smaller allocation, and so an effort was made to share logic across the three. Unfortunately doing this turned out unnaturally tortured, with a loop iterating over the three page sizes, only to call into a function with case statements for each page size. In the future Dynamic PAMT will add more logic that is special to the 4KB page size, making the benefit of the math sharing even more questionable.
Three is not a very high number, so get rid of the loop and just duplicate the small calculation three times. In doing so, setup for future Dynamic PAMT changes.
Since the loop that iterates over it is gone, further simplify the code by dropping the array of intermediate size and base storage. Just store the values to their final locations.
AI was used under supervision to collect/apply feedback, review code and workshop logs.
--- arch/x86/virt/vmx/tdx/tdx.c | 88 +++++++++++------------------------- 1 file changed, 27 insertions(+), 61 deletions(-)
arch/x86/virt/vmx/tdx/tdx.c +27 -61
@@ -514,31 +514,21 @@ static __init int fill_out_tdmrs(struct list_head *tmb_list,* Calculate PAMT size given a TDMR and a page size. The returned * PAMT size is always aligned up to 4K page boundary. */ -static __init unsigned long tdmr_get_pamt_sz (struct tdmr_info *tdmr,int pgsz, -u16 pamt_entry_size) +static __init unsigned long tdmr_get_pamt_sz (struct tdmr_info *tdmr,int pgsz) {unsigned long pamt_sz, nr_pamt_entries; +const int tdx_pg_size_shift[TDX_PS_NR ] = {PAGE_SHIFT ,PMD_SHIFT ,PUD_SHIFT }; +const u16 pamt_entry_size[TDX_PS_NR ] = { + tdx_sysinfo.tdmr.pamt_4k_entry_size, + tdx_sysinfo.tdmr.pamt_2m_entry_size, + tdx_sysinfo.tdmr.pamt_1g_entry_size, + }; -switch (pgsz) { -case TDX_PS_4K : - nr_pamt_entries = tdmr->size >>PAGE_SHIFT ; -break ; -case TDX_PS_2M : - nr_pamt_entries = tdmr->size >>PMD_SHIFT ; -break ; -case TDX_PS_1G : - nr_pamt_entries = tdmr->size >>PUD_SHIFT ; -break ; -default : -WARN_ON_ONCE (1 ); -return 0 ; - } + nr_pamt_entries = tdmr->size >> tdx_pg_size_shift[pgsz]; + pamt_sz = nr_pamt_entries * pamt_entry_size[pgsz]; - pamt_sz = nr_pamt_entries * pamt_entry_size;/* TDX requires PAMT size must be 4K aligned */ - pamt_sz =ALIGN (pamt_sz,PAGE_SIZE ); - -return pamt_sz; +return PAGE_ALIGN (pamt_sz); }/*
@@ -576,15 +566,11 @@ static __init int tdmr_get_nid(struct tdmr_info *tdmr, struct list_head *tmb_lis* within @tdmr, and set up PAMTs for @tdmr. */ static __init int tdmr_set_up_pamt (struct tdmr_info *tdmr, -struct list_head *tmb_list, -u16 pamt_entry_size[]) +struct list_head *tmb_list) { -unsigned long pamt_base[TDX_PS_NR ]; -unsigned long pamt_size[TDX_PS_NR ]; -unsigned long tdmr_pamt_base;unsigned long tdmr_pamt_size;struct page *pamt; -int pgsz, nid; +int nid; nid =tdmr_get_nid (tdmr, tmb_list);
@@ -592,12 +578,10 @@ static __init int tdmr_set_up_pamt(struct tdmr_info *tdmr,* Calculate the PAMT size for each TDX supported page size * and the total PAMT size. */ - tdmr_pamt_size =0 ; -for (pgsz =TDX_PS_4K ; pgsz <TDX_PS_NR ; pgsz++) { - pamt_size[pgsz] =tdmr_get_pamt_sz (tdmr, pgsz, - pamt_entry_size[pgsz]); - tdmr_pamt_size += pamt_size[pgsz]; - } + tdmr->pamt_4k_size =tdmr_get_pamt_sz (tdmr,TDX_PS_4K ); + tdmr->pamt_2m_size =tdmr_get_pamt_sz (tdmr,TDX_PS_2M ); + tdmr->pamt_1g_size =tdmr_get_pamt_sz (tdmr,TDX_PS_1G ); + tdmr_pamt_size = tdmr->pamt_4k_size + tdmr->pamt_2m_size + tdmr->pamt_1g_size;/* * Allocate one chunk of physically contiguous memory for all
@@ -606,25 +590,17 @@ static __init int tdmr_set_up_pamt(struct tdmr_info *tdmr,*/ pamt =alloc_contig_pages (tdmr_pamt_size >>PAGE_SHIFT ,GFP_KERNEL , nid, &node_online_map); -if (!pamt) -return -ENOMEM ;/* -* Break the contiguous allocation back up into the -* individual PAMTs for each page size. +* tdmr->pamt_4k_base is still zero so the error +* path of the caller will skip freeing the PAMT. */ - tdmr_pamt_base =page_to_pfn (pamt) <<PAGE_SHIFT ; -for (pgsz =TDX_PS_4K ; pgsz <TDX_PS_NR ; pgsz++) { - pamt_base[pgsz] = tdmr_pamt_base; - tdmr_pamt_base += pamt_size[pgsz]; - } +if (!pamt) +return -ENOMEM ; - tdmr->pamt_4k_base = pamt_base[TDX_PS_4K ]; - tdmr->pamt_4k_size = pamt_size[TDX_PS_4K ]; - tdmr->pamt_2m_base = pamt_base[TDX_PS_2M ]; - tdmr->pamt_2m_size = pamt_size[TDX_PS_2M ]; - tdmr->pamt_1g_base = pamt_base[TDX_PS_1G ]; - tdmr->pamt_1g_size = pamt_size[TDX_PS_1G ]; + tdmr->pamt_4k_base =page_to_phys (pamt); + tdmr->pamt_2m_base = tdmr->pamt_4k_base + tdmr->pamt_4k_size; + tdmr->pamt_1g_base = tdmr->pamt_2m_base + tdmr->pamt_2m_size;return 0 ; }
@@ -655,10 +631,7 @@ static __init void tdmr_do_pamt_func(struct tdmr_info *tdmr,tdmr_get_pamt (tdmr, &pamt_base, &pamt_size);/* Do nothing if PAMT hasn't been allocated for this TDMR */ -if (!pamt_size) -return ; - -if (WARN_ON_ONCE (!pamt_base)) +if (!pamt_base)return ;pamt_func (pamt_base, pamt_size);
@@ -684,14 +657,12 @@ static __init void tdmrs_free_pamt_all(struct tdmr_info_list *tdmr_list)/* Allocate and set up PAMTs for all TDMRs */ static __init int tdmrs_set_up_pamt_all (struct tdmr_info_list *tdmr_list, -struct list_head *tmb_list, -u16 pamt_entry_size[]) +struct list_head *tmb_list) {int i, ret =0 ;for (i =0 ; i < tdmr_list->nr_consumed_tdmrs; i++) { - ret =tdmr_set_up_pamt (tdmr_entry (tdmr_list, i), tmb_list, - pamt_entry_size); + ret =tdmr_set_up_pamt (tdmr_entry (tdmr_list, i), tmb_list);if (ret) goto err; }
@@ -968,18 +939,13 @@ static __init int construct_tdmrs(struct list_head *tmb_list,struct tdmr_info_list *tdmr_list, struct tdx_sys_info_tdmr *sysinfo_tdmr) { - u16 pamt_entry_size[TDX_PS_NR] = { - sysinfo_tdmr->pamt_4k_entry_size, - sysinfo_tdmr->pamt_2m_entry_size, - sysinfo_tdmr->pamt_1g_entry_size, - }; int ret; ret =fill_out_tdmrs (tmb_list, tdmr_list);if (ret)return ret; - ret =tdmrs_set_up_pamt_all (tdmr_list, tmb_list, pamt_entry_size); + ret =tdmrs_set_up_pamt_all (tdmr_list, tmb_list);if (ret)return ret;
Rick Edgecombe
maintainerPATCH v11 2/11 x86/virt/tdx: Allocate page bitmap for Dynamic PAMT
In reply to Rick EdgecombeThe TDX Physical Address Metadata Table (PAMT) holds data about the physical memory used by TDX, and must be allocated by the kernel during TDX module initialization.
The exact size of the required PAMT memory is determined by the TDX module and may vary between TDX module versions. Currently it is approximately 0.4% of the system memory. This is a significant commitment, especially if it is not known upfront whether the machine will run any TDX guests.
Each memory region that the TDX module might use needs three separate PAMT allocations. One for each supported page size (1GB, 2MB, 4KB). The TDX module supports a new feature designed to reduce PAMT overhead called Dynamic PAMT (DPAMT). Under DPAMT the 4KB level is allocated dynamically during runtime, while the 1GB and 2MB levels remain allocated on TDX module initialization.
However, in the details, DPAMT still needs some smaller per 4KB page scoped data (currently it is 1 bit per page). The TDX module exposes the number of bits as a separate piece of metadata than the 4KB static allocation for normal PAMT. Although the size is enumerated differently, it is handed to the TDX module in the same way the 4KB page size PAMT allocation is for normal PAMT.
Begin to implement DPAMT in the kernel by reading the bits-per-page needed for DPAMT. Calculate the size needed for the bitmap, and use it instead of the 4KB size determined for normal PAMT, in the case of DPAMT.
The existing metadata reading code was generated by a script, but the current plan is to stop generating this code, as the script has continued to need adjustments. So add manually written code and adjust the comment about it being autogenerated to be more generic. Start to adopt a more normal kernel code style without the ternary statements and if conditionals assignments that the auto generated code has.
AI was used under supervision to collect/apply feedback, review code and workshop logs.
Based on a patch originally by Kiryl Shutsemau.
---
v10:
- Remove other "autogenerated" references. (AI nit checker)
- Change "Dynamic PAMT" to "DPAMT" in comments, and in the second reference in the logs. (Dave)
v9:
- Switch to byte size hint in metadata field id (Sashiko)
v7:
- Re-order pamt size calculations for greater readability (Kiryl)
- Move comment to its own line in tdx_supports_dynamic_pamt() (Yan, Sohil)
- Log tweak (Sohil)
- Make comment in metadata reading more appropriate (Sohil)
- Drop Assisted-by tag and cover AI use in log (Dave)
- Move tdx_supports_dynamic_pamt() to not static inline to reduce churn in later changes
v6:
- Improve comment (Binbin)
- Log tweaks
- Mark tdmr_get_pamt_bitmap_sz() __init in response to upstream changes
- Switch to more normal kernel code style, even though it differs from the existing auto generated code.
--- arch/x86/include/asm/tdx.h | 2 ++ arch/x86/include/asm/tdx_global_metadata.h | 9 ++++--- arch/x86/virt/vmx/tdx/tdx.c | 29 +++++++++++++++++++-- arch/x86/virt/vmx/tdx/tdx_global_metadata.c | 23 +++++++++++++++- 4 files changed, 57 insertions(+), 6 deletions(-)
arch/x86/include/asm/tdx.h +2 -0
@@ -118,6 +118,8 @@ static inline bool tdx_supports_runtime_update(const struct tdx_sys_info *sysinfreturn sysinfo->features.tdx_features0 &TDX_FEATURES0_TD_PRESERVING ; } +bool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo); +int tdx_guest_keyid_alloc (void );u32 tdx_get_nr_guest_keyids (void );void tdx_guest_keyid_free (unsigned int keyid);
arch/x86/include/asm/tdx_global_metadata.h +6 -3
@@ -1,7 +1,7 @@/* SPDX-License-Identifier: GPL-2.0 */ -/* Automatically generated TDX global metadata structures. */ -#ifndef _X86_VIRT_TDX_AUTO_GENERATED_TDX_GLOBAL_METADATA_H -#define _X86_VIRT_TDX_AUTO_GENERATED_TDX_GLOBAL_METADATA_H +/* TDX global metadata structures. */ +#ifndef _X86_VIRT_TDX_TDX_GLOBAL_METADATA_H +#define _X86_VIRT_TDX_TDX_GLOBAL_METADATA_H#include <linux/types.h>
@@ -21,6 +21,9 @@ struct tdx_sys_info_tdmr {u16 pamt_4k_entry_size;u16 pamt_2m_entry_size;u16 pamt_1g_entry_size; + +/* Optional metadata, if DPAMT is supported */ +u8 pamt_page_bitmap_entry_bits; };struct tdx_sys_info_td_ctrl {
arch/x86/virt/vmx/tdx/tdx.c +27 -2
@@ -510,6 +510,18 @@ static __init int fill_out_tdmrs(struct list_head *tmb_list,return 0 ; } +static __init unsigned long tdmr_get_pamt_bitmap_sz (struct tdmr_info *tdmr) +{ +unsigned long pamt_sz, nr_pamt_entries; +int bits_per_entry; + + bits_per_entry = tdx_sysinfo.tdmr.pamt_page_bitmap_entry_bits; + nr_pamt_entries = tdmr->size >>PAGE_SHIFT ; + pamt_sz =DIV_ROUND_UP (nr_pamt_entries * bits_per_entry,BITS_PER_BYTE ); + +return PAGE_ALIGN (pamt_sz); +} +/* * Calculate PAMT size given a TDMR and a page size. The returned * PAMT size is always aligned up to 4K page boundary.
@@ -578,9 +590,16 @@ static __init int tdmr_set_up_pamt(struct tdmr_info *tdmr,* Calculate the PAMT size for each TDX supported page size * and the total PAMT size. */ - tdmr->pamt_4k_size =tdmr_get_pamt_sz (tdmr,TDX_PS_4K ); - tdmr->pamt_2m_size =tdmr_get_pamt_sz (tdmr,TDX_PS_2M ); tdmr->pamt_1g_size =tdmr_get_pamt_sz (tdmr,TDX_PS_1G ); + tdmr->pamt_2m_size =tdmr_get_pamt_sz (tdmr,TDX_PS_2M ); + +if (tdx_supports_dynamic_pamt (&tdx_sysinfo)) { +/* With DPAMT, PAMT_4K is replaced with a bitmap */ + tdmr->pamt_4k_size =tdmr_get_pamt_bitmap_sz (tdmr); + }else { + tdmr->pamt_4k_size =tdmr_get_pamt_sz (tdmr,TDX_PS_4K ); + } + tdmr_pamt_size = tdmr->pamt_4k_size + tdmr->pamt_2m_size + tdmr->pamt_1g_size;/*
@@ -1971,6 +1990,12 @@ u64 tdh_phymem_page_wbinvd_hkid(u64 hkid, kvm_pfn_t pfn) }EXPORT_SYMBOL_FOR_KVM (tdh_phymem_page_wbinvd_hkid); +bool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo) +{ +/* To be enabled when kernel is ready. */ +return false; +} +void tdx_sys_disable (void ) {struct tdx_module_args args = {};
arch/x86/virt/vmx/tdx/tdx_global_metadata.c +22 -1
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 /* -* Automatically generated functions to read TDX global metadata. +* Functions to read TDX global metadata. * * This file doesn't compile on its own as it lacks of inclusion * of SEAMCALL wrapper primitive which reads global metadata.
@@ -33,6 +33,18 @@ static __init int get_tdx_sys_info_features(struct tdx_sys_info_features *sysinfreturn ret; } +static __init int get_tdx_sys_info_tdmr_dpamt (struct tdx_sys_info_tdmr *sysinfo_tdmr) +{ +int ret; +u64 val; + + ret =read_sys_metadata_field (0x9100000000000013 , &val); +if (!ret) + sysinfo_tdmr->pamt_page_bitmap_entry_bits = val; + +return ret; +} +static __init int get_tdx_sys_info_tdmr (struct tdx_sys_info_tdmr *sysinfo_tdmr) {int ret =0 ;
@@ -129,5 +141,14 @@ static __init int get_tdx_sys_info(struct tdx_sys_info *sysinfo) ret = ret ?:get_tdx_sys_info_td_ctrl (&sysinfo->td_ctrl); ret = ret ?:get_tdx_sys_info_td_conf (&sysinfo->td_conf); +/* +* The kernel supports using TDX without DPAMT, so +* avoid reporting failure if it's not supported. Don't +* try to support buggy TDX modules that advertise +* DPAMT but don't expose the metadata. +*/ +if (!ret &&tdx_supports_dynamic_pamt (sysinfo)) + ret =get_tdx_sys_info_tdmr_dpamt (&sysinfo->tdmr); +return ret; }
Signature · 1 line
2.55.0
[tip: x86/tdx] x86/virt/tdx: Allocate page bitmap for Dynamic PAMT
The following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: eadde434aa9da1f43804c7097ba360dda8ccd9ef Gitweb: https://git.kernel.org/tip/eadde434aa9da1f43804c7097ba360dda8ccd9ef Author: Rick Edgecombe <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:32 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:02 -07:00
x86/virt/tdx: Allocate page bitmap for Dynamic PAMT
The TDX Physical Address Metadata Table (PAMT) holds data about the physical memory used by TDX, and must be allocated by the kernel during TDX module initialization.
The exact size of the required PAMT memory is determined by the TDX module and may vary between TDX module versions. Currently it is approximately 0.4% of the system memory. This is a significant commitment, especially if it is not known upfront whether the machine will run any TDX guests.
Each memory region that the TDX module might use needs three separate PAMT allocations. One for each supported page size (1GB, 2MB, 4KB). The TDX module supports a new feature designed to reduce PAMT overhead called Dynamic PAMT (DPAMT). Under DPAMT the 4KB level is allocated dynamically during runtime, while the 1GB and 2MB levels remain allocated on TDX module initialization.
However, in the details, DPAMT still needs some smaller per 4KB page scoped data (currently it is 1 bit per page). The TDX module exposes the number of bits as a separate piece of metadata than the 4KB static allocation for normal PAMT. Although the size is enumerated differently, it is handed to the TDX module in the same way the 4KB page size PAMT allocation is for normal PAMT.
Begin to implement DPAMT in the kernel by reading the bits-per-page needed for DPAMT. Calculate the size needed for the bitmap, and use it instead of the 4KB size determined for normal PAMT, in the case of DPAMT.
The existing metadata reading code was generated by a script, but the current plan is to stop generating this code, as the script has continued to need adjustments. So add manually written code and adjust the comment about it being autogenerated to be more generic. Start to adopt a more normal kernel code style without the ternary statements and if conditionals assignments that the auto generated code has.
AI was used under supervision to collect/apply feedback, review code and workshop logs.
Based on a patch originally by Kiryl Shutsemau.
--- arch/x86/include/asm/tdx.h | 2 +- arch/x86/include/asm/tdx_global_metadata.h | 9 ++++-- arch/x86/virt/vmx/tdx/tdx.c | 29 ++++++++++++++++++-- arch/x86/virt/vmx/tdx/tdx_global_metadata.c | 23 +++++++++++++++- 4 files changed, 57 insertions(+), 6 deletions(-)
arch/x86/include/asm/tdx.h +2 -0
@@ -118,6 +118,8 @@ static inline bool tdx_supports_runtime_update(const struct tdx_sys_info *sysinfreturn sysinfo->features.tdx_features0 &TDX_FEATURES0_TD_PRESERVING ; } +bool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo); +int tdx_guest_keyid_alloc (void );u32 tdx_get_nr_guest_keyids (void );void tdx_guest_keyid_free (unsigned int keyid);
arch/x86/include/asm/tdx_global_metadata.h +6 -3
@@ -1,7 +1,7 @@/* SPDX-License-Identifier: GPL-2.0 */ -/* Automatically generated TDX global metadata structures. */ -#ifndef _X86_VIRT_TDX_AUTO_GENERATED_TDX_GLOBAL_METADATA_H -#define _X86_VIRT_TDX_AUTO_GENERATED_TDX_GLOBAL_METADATA_H +/* TDX global metadata structures. */ +#ifndef _X86_VIRT_TDX_TDX_GLOBAL_METADATA_H +#define _X86_VIRT_TDX_TDX_GLOBAL_METADATA_H#include <linux/types.h>
@@ -21,6 +21,9 @@ struct tdx_sys_info_tdmr {u16 pamt_4k_entry_size;u16 pamt_2m_entry_size;u16 pamt_1g_entry_size; + +/* Optional metadata, if DPAMT is supported */ +u8 pamt_page_bitmap_entry_bits; };struct tdx_sys_info_td_ctrl {
arch/x86/virt/vmx/tdx/tdx.c +27 -2
@@ -510,6 +510,18 @@ static __init int fill_out_tdmrs(struct list_head *tmb_list,return 0 ; } +static __init unsigned long tdmr_get_pamt_bitmap_sz (struct tdmr_info *tdmr) +{ +unsigned long pamt_sz, nr_pamt_entries; +int bits_per_entry; + + bits_per_entry = tdx_sysinfo.tdmr.pamt_page_bitmap_entry_bits; + nr_pamt_entries = tdmr->size >>PAGE_SHIFT ; + pamt_sz =DIV_ROUND_UP (nr_pamt_entries * bits_per_entry,BITS_PER_BYTE ); + +return PAGE_ALIGN (pamt_sz); +} +/* * Calculate PAMT size given a TDMR and a page size. The returned * PAMT size is always aligned up to 4K page boundary.
@@ -578,9 +590,16 @@ static __init int tdmr_set_up_pamt(struct tdmr_info *tdmr,* Calculate the PAMT size for each TDX supported page size * and the total PAMT size. */ - tdmr->pamt_4k_size =tdmr_get_pamt_sz (tdmr,TDX_PS_4K ); - tdmr->pamt_2m_size =tdmr_get_pamt_sz (tdmr,TDX_PS_2M ); tdmr->pamt_1g_size =tdmr_get_pamt_sz (tdmr,TDX_PS_1G ); + tdmr->pamt_2m_size =tdmr_get_pamt_sz (tdmr,TDX_PS_2M ); + +if (tdx_supports_dynamic_pamt (&tdx_sysinfo)) { +/* With DPAMT, PAMT_4K is replaced with a bitmap */ + tdmr->pamt_4k_size =tdmr_get_pamt_bitmap_sz (tdmr); + }else { + tdmr->pamt_4k_size =tdmr_get_pamt_sz (tdmr,TDX_PS_4K ); + } + tdmr_pamt_size = tdmr->pamt_4k_size + tdmr->pamt_2m_size + tdmr->pamt_1g_size;/*
@@ -1971,6 +1990,12 @@ u64 tdh_phymem_page_wbinvd_hkid(u64 hkid, kvm_pfn_t pfn) }EXPORT_SYMBOL_FOR_KVM (tdh_phymem_page_wbinvd_hkid); +bool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo) +{ +/* To be enabled when kernel is ready. */ +return false; +} +void tdx_sys_disable (void ) {struct tdx_module_args args = {};
arch/x86/virt/vmx/tdx/tdx_global_metadata.c +22 -1
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 /* -* Automatically generated functions to read TDX global metadata. +* Functions to read TDX global metadata. * * This file doesn't compile on its own as it lacks of inclusion * of SEAMCALL wrapper primitive which reads global metadata.
@@ -33,6 +33,18 @@ static __init int get_tdx_sys_info_features(struct tdx_sys_info_features *sysinfreturn ret; } +static __init int get_tdx_sys_info_tdmr_dpamt (struct tdx_sys_info_tdmr *sysinfo_tdmr) +{ +int ret; +u64 val; + + ret =read_sys_metadata_field (0x9100000000000013 , &val); +if (!ret) + sysinfo_tdmr->pamt_page_bitmap_entry_bits = val; + +return ret; +} +static __init int get_tdx_sys_info_tdmr (struct tdx_sys_info_tdmr *sysinfo_tdmr) {int ret =0 ;
@@ -129,5 +141,14 @@ static __init int get_tdx_sys_info(struct tdx_sys_info *sysinfo) ret = ret ?:get_tdx_sys_info_td_ctrl (&sysinfo->td_ctrl); ret = ret ?:get_tdx_sys_info_td_conf (&sysinfo->td_conf); +/* +* The kernel supports using TDX without DPAMT, so +* avoid reporting failure if it's not supported. Don't +* try to support buggy TDX modules that advertise +* DPAMT but don't expose the metadata. +*/ +if (!ret &&tdx_supports_dynamic_pamt (sysinfo)) + ret =get_tdx_sys_info_tdmr_dpamt (&sysinfo->tdmr); +return ret; }
Rick Edgecombe
maintainerPATCH v11 3/11 x86/virt/tdx: Add __tdx_pamt_get/put() helpers
In reply to Rick EdgecombeAdd helpers to use when allocating or preparing pages that are handed to the TDX module for use as control/S-EPT pages, and thus need Dynamic PAMT (DPAMT) adjustments.
The TDX module tracks some state for each page of physical memory that it might use. It calls this state the PAMT. It includes separate state for each page size a physical page could be utilized at within the TDX module (1GB, 2MB, 4KB). In DPAMT, only the 4KB page size state is allocated dynamically.
KVM will need to hand pages to the TDX module that it will use at 4KB granularity. So these pages will need DPAMT backing added before they are used by the TDX module, and removed afterwards.
Create __tdx_pamt_get/put() to handle installing DPAMT 4KB backing for pages that are already allocated (such as KVM's use of S-EPT page tables or guest private memory). Have them take a pfn instead of a struct page, as future changes will want to use these helpers for guest pages which are tracked by PFN.
Also add __tdx_alloc_control_page() and __tdx_free_control_page() to handle both page allocation and DPAMT installation. Make them behave like normal alloc/free functions where allocation can fail in the case of no memory, but free (with any necessary DPAMT release) always succeeds. Do this so they can eventually support the existing TDX flows that require teardowns to succeed.
Don't CLFLUSH the DPAMT pages handed to the TDX module, as is done for some other SEAMCALLs, as the TDX docs specify that this is only needed on "TD private memory or TD control structure page".
Since these allocations will be easily user triggerable, account the memory.
Only one pair of DPAMT pages is required for each 2MB-aligned physical region, so multiple callers could trip over each other if they try to manage the shared backing for two separate 4KB pages contained in one. To build the logic up iteratively, don't do anything to handle pages from the same 2MB region yet. Functionality to handle this will be added before DPAMT can be enabled.
AI was used under supervision to collect/apply feedback, split patches, review code and workshop logs.
Based on a patch originally by Kiryl Shutsemau.
---
v11:
- Set correct __maybe_unused order in this patch instad of fixing it in the next one. (Dave)
v10:
- Clarify in comments about the limitations of the helpers added. (Dave)
- Add comments in pamt_2mb_arg() about what is going on (Dave)
- Prepend helpers with __ (Dave)
- Align tdx_module_args args (Dave)
- Standardize "TDX Module" (Dave)
- Remove exports for newly private __ functions.
- Move TDX_DPAMT_ENTRY_PAGE_CNT out of header to sole file that uses it. (AI nit checker)
- Standardize for loop iterators declaration. (Nit checker)
- Change "Dynamic PAMT" to "DPAMT" in comments, and in the second reference in the logs. (Dave)
v9:
- Address about how the log doesn't fully cover the limitations at this stage. (Sashiko)
--- arch/x86/virt/vmx/tdx/tdx.c | 197 ++++++++++++++++++++++++++++++++++++ arch/x86/virt/vmx/tdx/tdx.h | 2 + 2 files changed, 199 insertions(+)
arch/x86/virt/vmx/tdx/tdx.c +197 -0
@@ -46,6 +46,9 @@#include "seamcall_internal.h" #include "tdx.h" +/* Number of DPAMT pages to be provided to TDX module per 2MB region of PA */ +#define TDX_DPAMT_ENTRY_PAGE_CNT 2 +struct tdx_module_state {bool initialized;bool sysinit_done;
@@ -1996,6 +1999,200 @@ bool tdx_supports_dynamic_pamt(const struct tdx_sys_info *sysinfo)return false; } +static int alloc_pamt_array (struct page **pamt_pages) +{ +int i, j; + +for (i =0 ; i <TDX_DPAMT_ENTRY_PAGE_CNT ; i++) { + pamt_pages[i] =alloc_page (GFP_KERNEL_ACCOUNT ); +if (!pamt_pages[i]) + goto err; + } + +return 0 ; + +err: +for (j =0 ; j < i; j++) +__free_page (pamt_pages[j]); + +return -ENOMEM ; +} + +static void free_pamt_array (struct page **pamt_pages) +{ +int i; + +for (i =0 ; i <TDX_DPAMT_ENTRY_PAGE_CNT ; i++) { +/* +* Reset pages unconditionally to cover cases +* where they were passed to the TDX module. +*/ +tdx_quirk_reset_paddr (page_to_phys (pamt_pages[i]),PAGE_SIZE ); + +__free_page (pamt_pages[i]); + } +} + +/* Helper for building DPAMT seamcall() arguments. */ +static u64 pamt_2mb_arg (kvm_pfn_t pfn) +{ +/* Find the 2MB-wide DPAMT region for 'pfn': */ +unsigned long hpa_2mb =ALIGN_DOWN (pfn <<PAGE_SHIFT ,PMD_SIZE ); + +/* +* TDX ABI requires specifying the page level the installed DPAMT +* backing will cover, even though today only 2MB is supported. +*/ +return hpa_2mb |TDX_PS_2M ; +} + +/* Add PAMT backing for the 2MB region surrounding the given pfn. */ +static u64 tdh_phymem_pamt_add (kvm_pfn_t pfn,struct page **pamt_pages) +{ +struct tdx_module_args args = { + .rcx =pamt_2mb_arg (pfn), + .rdx =page_to_phys (pamt_pages[0 ]), + .r8 =page_to_phys (pamt_pages[1 ]), + }; + +return seamcall (TDH_PHYMEM_PAMT_ADD , &args); +} + +/* Remove PAMT backing for the 2MB region surrounding the given pfn. */ +static u64 tdh_phymem_pamt_remove (kvm_pfn_t pfn,struct page **pamt_pages) +{ +struct tdx_module_args args = { + .rcx =pamt_2mb_arg (pfn), + }; +u64 ret; + + ret =seamcall_ret (TDH_PHYMEM_PAMT_REMOVE , &args); +if (ret) +return ret; + +/* Copy PAMT pages out of the struct per the TDX ABI */ + pamt_pages[0 ] =phys_to_page (args.rdx); + pamt_pages[1 ] =phys_to_page (args.r8); + +return 0 ; +} + +/* +* Allocate DPAMT memory for the 2MB aligned region surrounding +* the given page. +* +* Only call this when the pfn is known not to already have Dynamic +* PAMT pages in the TDX module for it. +* +* Effectively it is not (yet) like a get, and more like a manual +* manipulation of the DPAMT backing for the 2MB aligned range +* covered by the pfn. +*/ +static int __tdx_pamt_get (kvm_pfn_t pfn) +{ +struct page *pamt_pages[TDX_DPAMT_ENTRY_PAGE_CNT ]; +u64 tdx_status; +int ret; + +if (!tdx_supports_dynamic_pamt (&tdx_sysinfo)) +return 0 ; + + ret =alloc_pamt_array (pamt_pages); +if (ret) +return ret; + + tdx_status =tdh_phymem_pamt_add (pfn, pamt_pages); +if (tdx_status !=TDX_SUCCESS ) { + ret = -EIO ; + goto out_free; + } + +return 0 ; + +out_free: +free_pamt_array (pamt_pages); + +return ret; +} + +/* +* Free DPAMT memory for the 2MB aligned region surrounding the +* given page. Only call this when the pfn is known to already +* have DPAMT pages in the TDX module for it, and no other pfns +* in the aligned 2MB physical region still need it. +* +* Don't make multiple calls concurrently of __tdx_pamt_get/put(), +* as there is no protections from races. +* +* Effectively it is not (yet) like a refcounted put, and more like a +* manual manipulation of the DPAMT backing for the 2MB aligned +* range covered by the pfn. +*/ +static void __tdx_pamt_put (kvm_pfn_t pfn) +{ +struct page *pamt_pages[TDX_DPAMT_ENTRY_PAGE_CNT ] = {}; +u64 tdx_status; + +if (!tdx_supports_dynamic_pamt (&tdx_sysinfo)) +return ; + + tdx_status =tdh_phymem_pamt_remove (pfn, pamt_pages); + +/* +* Don't free pamt_pages as it could hold garbage when +* tdh_phymem_pamt_remove() fails. Don't panic/BUG_ON(), as +* there is no risk of data corruption, but do yell loudly as +* failure indicates a kernel bug, memory is being leaked, and +* the dangling PAMT entry may cause future operations to fail. +*/ +if (WARN_ON_ONCE (tdx_status !=TDX_SUCCESS )) +return ; + +free_pamt_array (pamt_pages); +} + +/* +* Return a page that can be gifted to the TDX module for use as a "control" +* page, i.e. pages that are used for control structures for a given TDX +* guest, and thus obtain TDX protections, including PAMT tracking. +* +* This function is currently only safe to call once. And not safe to call +* if __tdx_pamt_get() is called before or after. +*/ +static __maybe_unused struct page *__tdx_alloc_control_page (void ) +{ +struct page *page; + + page =alloc_page (GFP_KERNEL_ACCOUNT ); +if (!page) +return NULL ; + +if (__tdx_pamt_get (page_to_pfn (page))) { +__free_page (page); +return NULL ; + } + +return page; +} + +/* +* Free a page that was gifted to the TDX module for use as a control +* page. After this, the page is no longer protected by TDX. +* +* Like __tdx_pamt_put(), this is currently only safe to call this when +* a page is already known to have DPAMT pages in the TDX module for +* it, and no other pages in the aligned 2MB physical region will +* still need the backing. +*/ +static __maybe_unused void __tdx_free_control_page (struct page *page) +{ +if (!page) +return ; + +__tdx_pamt_put (page_to_pfn (page)); +__free_page (page); +} +void tdx_sys_disable (void ) {struct tdx_module_args args = {};
arch/x86/virt/vmx/tdx/tdx.h +2 -0
@@ -48,6 +48,8 @@#define TDH_SYS_CONFIG 45#define TDH_SYS_SHUTDOWN 52#define TDH_SYS_UPDATE 53 +#define TDH_PHYMEM_PAMT_ADD 58 +#define TDH_PHYMEM_PAMT_REMOVE 59#define TDH_SYS_DISABLE 69/*
Signature · 1 line
2.55.0
[tip: x86/tdx] x86/virt/tdx: Add __tdx_pamt_get/put() helpers
The following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: ad52ce8389d9f3708bfaa301e194550f582eb2b5 Gitweb: https://git.kernel.org/tip/ad52ce8389d9f3708bfaa301e194550f582eb2b5 Author: Rick Edgecombe <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:33 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:02 -07:00
x86/virt/tdx: Add __tdx_pamt_get/put() helpers
Add helpers to use when allocating or preparing pages that are handed to the TDX module for use as control/S-EPT pages, and thus need Dynamic PAMT (DPAMT) adjustments.
The TDX module tracks some state for each page of physical memory that it might use. It calls this state the PAMT. It includes separate state for each page size a physical page could be utilized at within the TDX module (1GB, 2MB, 4KB). In DPAMT, only the 4KB page size state is allocated dynamically.
KVM will need to hand pages to the TDX module that it will use at 4KB granularity. So these pages will need DPAMT backing added before they are used by the TDX module, and removed afterwards.
Create __tdx_pamt_get/put() to handle installing DPAMT 4KB backing for pages that are already allocated (such as KVM's use of S-EPT page tables or guest private memory). Have them take a pfn instead of a struct page, as future changes will want to use these helpers for guest pages which are tracked by PFN.
Also add __tdx_alloc_control_page() and __tdx_free_control_page() to handle both page allocation and DPAMT installation. Make them behave like normal alloc/free functions where allocation can fail in the case of no memory, but free (with any necessary DPAMT release) always succeeds. Do this so they can eventually support the existing TDX flows that require teardowns to succeed.
Don't CLFLUSH the DPAMT pages handed to the TDX module, as is done for some other SEAMCALLs, as the TDX docs specify that this is only needed on "TD private memory or TD control structure page".
Since these allocations will be easily user triggerable, account the memory.
Only one pair of DPAMT pages is required for each 2MB-aligned physical region, so multiple callers could trip over each other if they try to manage the shared backing for two separate 4KB pages contained in one. To build the logic up iteratively, don't do anything to handle pages from the same 2MB region yet. Functionality to handle this will be added before DPAMT can be enabled.
AI was used under supervision to collect/apply feedback, split patches, review code and workshop logs.
Based on a patch originally by Kiryl Shutsemau.
--- arch/x86/virt/vmx/tdx/tdx.c | 197 +++++++++++++++++++++++++++++++++++- arch/x86/virt/vmx/tdx/tdx.h | 2 +- 2 files changed, 199 insertions(+)
arch/x86/virt/vmx/tdx/tdx.c +197 -0
@@ -46,6 +46,9 @@#include "seamcall_internal.h" #include "tdx.h" +/* Number of DPAMT pages to be provided to TDX module per 2MB region of PA */ +#define TDX_DPAMT_ENTRY_PAGE_CNT 2 +struct tdx_module_state {bool initialized;bool sysinit_done;
@@ -1996,6 +1999,200 @@ bool tdx_supports_dynamic_pamt(const struct tdx_sys_info *sysinfo)return false; } +static int alloc_pamt_array (struct page **pamt_pages) +{ +int i, j; + +for (i =0 ; i <TDX_DPAMT_ENTRY_PAGE_CNT ; i++) { + pamt_pages[i] =alloc_page (GFP_KERNEL_ACCOUNT ); +if (!pamt_pages[i]) + goto err; + } + +return 0 ; + +err: +for (j =0 ; j < i; j++) +__free_page (pamt_pages[j]); + +return -ENOMEM ; +} + +static void free_pamt_array (struct page **pamt_pages) +{ +int i; + +for (i =0 ; i <TDX_DPAMT_ENTRY_PAGE_CNT ; i++) { +/* +* Reset pages unconditionally to cover cases +* where they were passed to the TDX module. +*/ +tdx_quirk_reset_paddr (page_to_phys (pamt_pages[i]),PAGE_SIZE ); + +__free_page (pamt_pages[i]); + } +} + +/* Helper for building DPAMT seamcall() arguments. */ +static u64 pamt_2mb_arg (kvm_pfn_t pfn) +{ +/* Find the 2MB-wide DPAMT region for 'pfn': */ +unsigned long hpa_2mb =ALIGN_DOWN (pfn <<PAGE_SHIFT ,PMD_SIZE ); + +/* +* TDX ABI requires specifying the page level the installed DPAMT +* backing will cover, even though today only 2MB is supported. +*/ +return hpa_2mb |TDX_PS_2M ; +} + +/* Add PAMT backing for the 2MB region surrounding the given pfn. */ +static u64 tdh_phymem_pamt_add (kvm_pfn_t pfn,struct page **pamt_pages) +{ +struct tdx_module_args args = { + .rcx =pamt_2mb_arg (pfn), + .rdx =page_to_phys (pamt_pages[0 ]), + .r8 =page_to_phys (pamt_pages[1 ]), + }; + +return seamcall (TDH_PHYMEM_PAMT_ADD , &args); +} + +/* Remove PAMT backing for the 2MB region surrounding the given pfn. */ +static u64 tdh_phymem_pamt_remove (kvm_pfn_t pfn,struct page **pamt_pages) +{ +struct tdx_module_args args = { + .rcx =pamt_2mb_arg (pfn), + }; +u64 ret; + + ret =seamcall_ret (TDH_PHYMEM_PAMT_REMOVE , &args); +if (ret) +return ret; + +/* Copy PAMT pages out of the struct per the TDX ABI */ + pamt_pages[0 ] =phys_to_page (args.rdx); + pamt_pages[1 ] =phys_to_page (args.r8); + +return 0 ; +} + +/* +* Allocate DPAMT memory for the 2MB aligned region surrounding +* the given page. +* +* Only call this when the pfn is known not to already have Dynamic +* PAMT pages in the TDX module for it. +* +* Effectively it is not (yet) like a get, and more like a manual +* manipulation of the DPAMT backing for the 2MB aligned range +* covered by the pfn. +*/ +static int __tdx_pamt_get (kvm_pfn_t pfn) +{ +struct page *pamt_pages[TDX_DPAMT_ENTRY_PAGE_CNT ]; +u64 tdx_status; +int ret; + +if (!tdx_supports_dynamic_pamt (&tdx_sysinfo)) +return 0 ; + + ret =alloc_pamt_array (pamt_pages); +if (ret) +return ret; + + tdx_status =tdh_phymem_pamt_add (pfn, pamt_pages); +if (tdx_status !=TDX_SUCCESS ) { + ret = -EIO ; + goto out_free; + } + +return 0 ; + +out_free: +free_pamt_array (pamt_pages); + +return ret; +} + +/* +* Free DPAMT memory for the 2MB aligned region surrounding the +* given page. Only call this when the pfn is known to already +* have DPAMT pages in the TDX module for it, and no other pfns +* in the aligned 2MB physical region still need it. +* +* Don't make multiple calls concurrently of __tdx_pamt_get/put(), +* as there is no protections from races. +* +* Effectively it is not (yet) like a refcounted put, and more like a +* manual manipulation of the DPAMT backing for the 2MB aligned +* range covered by the pfn. +*/ +static void __tdx_pamt_put (kvm_pfn_t pfn) +{ +struct page *pamt_pages[TDX_DPAMT_ENTRY_PAGE_CNT ] = {}; +u64 tdx_status; + +if (!tdx_supports_dynamic_pamt (&tdx_sysinfo)) +return ; + + tdx_status =tdh_phymem_pamt_remove (pfn, pamt_pages); + +/* +* Don't free pamt_pages as it could hold garbage when +* tdh_phymem_pamt_remove() fails. Don't panic/BUG_ON(), as +* there is no risk of data corruption, but do yell loudly as +* failure indicates a kernel bug, memory is being leaked, and +* the dangling PAMT entry may cause future operations to fail. +*/ +if (WARN_ON_ONCE (tdx_status !=TDX_SUCCESS )) +return ; + +free_pamt_array (pamt_pages); +} + +/* +* Return a page that can be gifted to the TDX module for use as a "control" +* page, i.e. pages that are used for control structures for a given TDX +* guest, and thus obtain TDX protections, including PAMT tracking. +* +* This function is currently only safe to call once. And not safe to call +* if __tdx_pamt_get() is called before or after. +*/ +static __maybe_unused struct page *__tdx_alloc_control_page (void ) +{ +struct page *page; + + page =alloc_page (GFP_KERNEL_ACCOUNT ); +if (!page) +return NULL ; + +if (__tdx_pamt_get (page_to_pfn (page))) { +__free_page (page); +return NULL ; + } + +return page; +} + +/* +* Free a page that was gifted to the TDX module for use as a control +* page. After this, the page is no longer protected by TDX. +* +* Like __tdx_pamt_put(), this is currently only safe to call this when +* a page is already known to have DPAMT pages in the TDX module for +* it, and no other pages in the aligned 2MB physical region will +* still need the backing. +*/ +static __maybe_unused void __tdx_free_control_page (struct page *page) +{ +if (!page) +return ; + +__tdx_pamt_put (page_to_pfn (page)); +__free_page (page); +} +void tdx_sys_disable (void ) {struct tdx_module_args args = {};
arch/x86/virt/vmx/tdx/tdx.h +2 -0
@@ -48,6 +48,8 @@#define TDH_SYS_CONFIG 45#define TDH_SYS_SHUTDOWN 52#define TDH_SYS_UPDATE 53 +#define TDH_PHYMEM_PAMT_ADD 58 +#define TDH_PHYMEM_PAMT_REMOVE 59#define TDH_SYS_DISABLE 69/*
Rick Edgecombe
maintainerPATCH v11 4/11 x86/virt/tdx: Allocate refcounts for Dynamic PAMT memory
In reply to Rick EdgecombeThe PAMT memory holds metadata for all possible TDX protected memory. Each physical address range is covered by PAMT entries at three levels (1GB, 2MB, 4KB). With Dynamic PAMT (DPAMT), the 4KB level of PAMT is allocated on demand. The kernel supplies the TDX module with page pairs to store the 4KB level entries, which cover 2MB of host physical memory. The kernel must provide this page pair before using pages from the range for TDX. If this is not done, SEAMCALLs that give the pages to be protected by the TDX module will fail.
Allocate reference counters for every 2MB range to track TDX memory usage. This can be used to handle concurrent get/put callers, in order to accurately determine when the dynamic 4KB level of DPAMT needs to be allocated and when it can be freed.
This allocation will currently consume 2MB for every 1TB of address space from 0 to max_pfn. The allocation size will depend on how the RAM is physically laid out. In a worst case scenario where the entire 52 bit address space is covered this would be 8GB. Then the DPAMT refcount allocations could hypothetically cause the savings from DPAMT to go negative on exotic platforms with sparse, small amounts of memory.
Future changes could reduce this refcount overhead to be only allocating refcounts for physical ranges that contain memory that TDX can use. However, this is left for future work.
AI was used under supervision to collect/apply feedback, review code and workshop logs.
Based on a patch originally by Kiryl Shutsemau.
---
v10:
- Change "Dynamic PAMT" to "DPAMT" in comments, and in the second reference in the logs. (Dave)
- Rename some other pamt gunk to dpamt (Dave)
v7:
- Annotate functions __init. (Chao)
- Log tweaks. (Yan)
- Standardize on memory units in the text. (Sohil)
- Delete unneeded comment. (Sohil)
- Use vzalloc(). (Sohil)
- Drop Assisted-by tag and cover AI use in log. (Dave)
v6:
- Remove confusing reference to allocating PAMT memory in pamt_refcounts comment. (Yan)
- Rename "metadata" function names that really deal with refcounts, as metadata already has a different meaning in TDX.
- Move tdx_find_pamt_refcount() to this patch to aid in reviewability.
--- arch/x86/virt/vmx/tdx/tdx.c | 53 ++++++++++++++++++++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-)
arch/x86/virt/vmx/tdx/tdx.c +52 -1
@@ -30,6 +30,7 @@#include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/idr.h> +#include <linux/vmalloc.h> #include <asm/page.h> #include <asm/special_insns.h> #include <asm/msr-index.h>
@@ -66,6 +67,14 @@ static DEFINE_PER_CPU(bool, tdx_lp_initialized);static struct tdmr_info_list tdx_tdmr_list; +/* +* On a machine with DPAMT, the kernel maintains a reference counter +* for every 2MB range. The counter indicates how many users there are for +* the DPAMT at the 2MB range. The kernel allocates DPAMT refcounts at +* initialization. +*/ +static atomic_t *dpamt_refcounts; +/* All TDX-usable memory regions. Protected by mem_hotplug_lock. */ static LIST_HEAD (tdx_memlist);
@@ -255,6 +264,42 @@ static struct syscore tdx_syscore = { .ops = &tdx_syscore_ops, }; +/* +* Allocate DPAMT reference counters for all physical memory. +* +* It consumes 2MB for every 1TB of physical memory. +*/ +static __init int init_dpamt_refcounts (void ) +{ +size_t size =DIV_ROUND_UP (max_pfn,PTRS_PER_PTE ) *sizeof (*dpamt_refcounts); + +if (!tdx_supports_dynamic_pamt (&tdx_sysinfo)) +return 0 ; + + dpamt_refcounts =vzalloc (size); +if (!dpamt_refcounts) +return -ENOMEM ; + +return 0 ; +} + +static __init void free_dpamt_refcounts (void ) +{ +if (!tdx_supports_dynamic_pamt (&tdx_sysinfo)) +return ; + +vfree (dpamt_refcounts); + dpamt_refcounts =NULL ; +} + +static __maybe_unused atomic_t *tdx_find_dpamt_refcount (unsigned long pfn) +{ +/* Find which PMD a PFN is in. */ +unsigned long index = pfn >> (PMD_SHIFT -PAGE_SHIFT ); + +return &dpamt_refcounts[index]; +} +/* * Add a memory region as a TDX memory block. The caller must make sure * all memory regions are added in address ascending order and don't
@@ -1155,10 +1200,14 @@ static __init int init_tdx_module(void)*/ get_online_mems (); - ret =build_tdx_memlist (&tdx_memlist); + ret =init_dpamt_refcounts ();if (ret) goto out_put_tdxmem; + ret =build_tdx_memlist (&tdx_memlist); +if (ret) + goto err_free_dpamt_refcounts; +/* Allocate enough space for constructing TDMRs */ ret =alloc_tdmr_list (&tdx_tdmr_list, &tdx_sysinfo.tdmr);if (ret)
@@ -1208,6 +1257,8 @@ static __init int init_tdx_module(void)free_tdmr_list (&tdx_tdmr_list); err_free_tdxmem:free_tdx_memlist (&tdx_memlist); +err_free_dpamt_refcounts: +free_dpamt_refcounts (); goto out_put_tdxmem; }
Signature · 1 line
2.55.0
[tip: x86/tdx] x86/virt/tdx: Allocate refcounts for Dynamic PAMT memory
The following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: 5386c5288001f00e5f2019d5f7b50c97d62f3a7b Gitweb: https://git.kernel.org/tip/5386c5288001f00e5f2019d5f7b50c97d62f3a7b Author: Rick Edgecombe <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:34 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:02 -07:00
x86/virt/tdx: Allocate refcounts for Dynamic PAMT memory
The PAMT memory holds metadata for all possible TDX protected memory. Each physical address range is covered by PAMT entries at three levels (1GB, 2MB, 4KB). With Dynamic PAMT (DPAMT), the 4KB level of PAMT is allocated on demand. The kernel supplies the TDX module with page pairs to store the 4KB level entries, which cover 2MB of host physical memory. The kernel must provide this page pair before using pages from the range for TDX. If this is not done, SEAMCALLs that give the pages to be protected by the TDX module will fail.
Allocate reference counters for every 2MB range to track TDX memory usage. This can be used to handle concurrent get/put callers, in order to accurately determine when the dynamic 4KB level of DPAMT needs to be allocated and when it can be freed.
This allocation will currently consume 2MB for every 1TB of address space from 0 to max_pfn. The allocation size will depend on how the RAM is physically laid out. In a worst case scenario where the entire 52 bit address space is covered this would be 8GB. Then the DPAMT refcount allocations could hypothetically cause the savings from DPAMT to go negative on exotic platforms with sparse, small amounts of memory.
Future changes could reduce this refcount overhead to be only allocating refcounts for physical ranges that contain memory that TDX can use. However, this is left for future work.
AI was used under supervision to collect/apply feedback, review code and workshop logs.
Based on a patch originally by Kiryl Shutsemau.
--- arch/x86/virt/vmx/tdx/tdx.c | 53 +++++++++++++++++++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-)
arch/x86/virt/vmx/tdx/tdx.c +52 -1
@@ -30,6 +30,7 @@#include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/idr.h> +#include <linux/vmalloc.h> #include <asm/page.h> #include <asm/special_insns.h> #include <asm/msr-index.h>
@@ -66,6 +67,14 @@ static DEFINE_PER_CPU(bool, tdx_lp_initialized);static struct tdmr_info_list tdx_tdmr_list; +/* +* On a machine with DPAMT, the kernel maintains a reference counter +* for every 2MB range. The counter indicates how many users there are for +* the DPAMT at the 2MB range. The kernel allocates DPAMT refcounts at +* initialization. +*/ +static atomic_t *dpamt_refcounts; +/* All TDX-usable memory regions. Protected by mem_hotplug_lock. */ static LIST_HEAD (tdx_memlist);
@@ -256,6 +265,42 @@ static struct syscore tdx_syscore = { };/* +* Allocate DPAMT reference counters for all physical memory. +* +* It consumes 2MB for every 1TB of physical memory. +*/ +static __init int init_dpamt_refcounts (void ) +{ +size_t size =DIV_ROUND_UP (max_pfn,PTRS_PER_PTE ) *sizeof (*dpamt_refcounts); + +if (!tdx_supports_dynamic_pamt (&tdx_sysinfo)) +return 0 ; + + dpamt_refcounts =vzalloc (size); +if (!dpamt_refcounts) +return -ENOMEM ; + +return 0 ; +} + +static __init void free_dpamt_refcounts (void ) +{ +if (!tdx_supports_dynamic_pamt (&tdx_sysinfo)) +return ; + +vfree (dpamt_refcounts); + dpamt_refcounts =NULL ; +} + +static __maybe_unused atomic_t *tdx_find_dpamt_refcount (unsigned long pfn) +{ +/* Find which PMD a PFN is in. */ +unsigned long index = pfn >> (PMD_SHIFT -PAGE_SHIFT ); + +return &dpamt_refcounts[index]; +} + +/* * Add a memory region as a TDX memory block. The caller must make sure * all memory regions are added in address ascending order and don't * overlap.
@@ -1155,10 +1200,14 @@ static __init int init_tdx_module(void)*/ get_online_mems (); - ret =build_tdx_memlist (&tdx_memlist); + ret =init_dpamt_refcounts ();if (ret) goto out_put_tdxmem; + ret =build_tdx_memlist (&tdx_memlist); +if (ret) + goto err_free_dpamt_refcounts; +/* Allocate enough space for constructing TDMRs */ ret =alloc_tdmr_list (&tdx_tdmr_list, &tdx_sysinfo.tdmr);if (ret)
@@ -1208,6 +1257,8 @@ err_free_tdmrs:free_tdmr_list (&tdx_tdmr_list); err_free_tdxmem:free_tdx_memlist (&tdx_memlist); +err_free_dpamt_refcounts: +free_dpamt_refcounts (); goto out_put_tdxmem; }
Rick Edgecombe
maintainerPATCH v11 5/11 x86/virt/tdx: Handle multiple callers in tdx_pamt_get/put()
In reply to Rick Edgecombe__tdx_pamt_get()/__tdx_pamt_put() unconditionally add or remove Dynamic PAMT (DPAMT) backing for the 2MB region covering the passed page. However, multiple callers can add or remove 4KB pages that fall within the same 2MB region and in that scenario only a single PAMT entry is required.
Make the helpers handle only adding/removing DPAMT backing when required, by refcounting each 2MB range. Gate the actual DPAMT add and remove on refcount transitions (0->1 and 1->0). Serialize the refcount check and SEAMCALL with a global spinlock so the read-decide-act sequence is atomic. This also avoids TDX module BUSY errors, as the DPAMT add and remove SEAMCALLs take internal TDX module locks for the 2MB ranges of the specified PFN and the PAMT page pair PFNs. So simultaneous attempts on the same 2MB ranges of the PFNs would otherwise encounter an error, which would not be handleable in the put case.
The lock is global and heavyweight. Use simple conditional logic to keep correctness obvious. This will be optimized in a later change.
The dpamt_refcounts[] are atomic_t's. They do not strictly need to be because all access is protected by pamt_lock. The overhead of an atomic_t in this situation is minuscule compared to the global lock. Leave the atomic_t in place to enable future optimization with minimal churn.
Since the DPAMT helpers are broadly functional now, drop the "__" to rename them tdx_pamt_get/put() and tdx_alloc/free_control_page(). Export them for use in KVM in subsequent changes.
AI was used under supervision to collect/apply feedback, split patches, review code and workshop logs.
Based on a patch originally by Kiryl Shutsemau.
---
v10:
- Rename the helper functions in this patch after changes to patch "x86/virt/tdx: Add tdx_alloc/free_control_page() helpers".
- Remove the comments around helper limitations, leaving to be as they were in v9, except for the "TDX module" wording fix.
- Export tdx_alloc/free_control_page() in this patch as a result of changes in "x86/virt/tdx: Add tdx_alloc/free_control_page() helpers" to make them private functions initially. Since they now become more broadly functional here, do the export in this patch.
- For consistency, also move the tdx_pamt_get/put() export here too.
- Change "Dynamic PAMT" to "DPAMT" in comments, and in the second reference in the logs. (Dave)
- Rename "pamt" gunk to "dpamt". (Dave)
v8:
- Fix PAMT capitalization in comment (Sohil)
v7:
- Convert scoped_guard() blocks to use normal spin_un/lock() for the sake of making next patches diff cleaner
- Drop __maybe_unused from tdx_find_pamt_refcount() (Binbin)
- Switch to atomic_inc_not_zero() (Dave)
- Justify use of atomic_t in log (Sohil)
- Log/comments (Yan)
- Drop Assisted-by tag and cover AI use in log (Dave)
--- arch/x86/include/asm/tdx.h | 6 +++ arch/x86/virt/vmx/tdx/tdx.c | 102 ++++++++++++++++++++---------------- 2 files changed, 63 insertions(+), 45 deletions(-)
arch/x86/include/asm/tdx.h +6 -0
@@ -120,12 +120,18 @@ static inline bool tdx_supports_runtime_update(const struct tdx_sys_info *sysinfbool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo); +int tdx_pamt_get (kvm_pfn_t pfn); +void tdx_pamt_put (kvm_pfn_t pfn); +int tdx_guest_keyid_alloc (void );u32 tdx_get_nr_guest_keyids (void );void tdx_guest_keyid_free (unsigned int keyid);void tdx_quirk_reset_paddr (unsigned long base,unsigned long size); +struct page *tdx_alloc_control_page (void ); +void tdx_free_control_page (struct page *page); +struct tdx_td {/* TD root structure: */ struct page *tdr_page;
arch/x86/virt/vmx/tdx/tdx.c +57 -45
193 lines not on this page · raw message
Signature · 1 line
2.55.0
[tip: x86/tdx] x86/virt/tdx: Handle multiple callers in tdx_pamt_get/put()
The following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: eca9d4a3f1f820439453f07ce700d316c398520e Gitweb: https://git.kernel.org/tip/eca9d4a3f1f820439453f07ce700d316c398520e Author: Rick Edgecombe <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:35 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:02 -07:00
x86/virt/tdx: Handle multiple callers in tdx_pamt_get/put()
__tdx_pamt_get()/__tdx_pamt_put() unconditionally add or remove Dynamic PAMT (DPAMT) backing for the 2MB region covering the passed page. However, multiple callers can add or remove 4KB pages that fall within the same 2MB region and in that scenario only a single PAMT entry is required.
Make the helpers handle only adding/removing DPAMT backing when required, by refcounting each 2MB range. Gate the actual DPAMT add and remove on refcount transitions (0->1 and 1->0). Serialize the refcount check and SEAMCALL with a global spinlock so the read-decide-act sequence is atomic. This also avoids TDX module BUSY errors, as the DPAMT add and remove SEAMCALLs take internal TDX module locks for the 2MB ranges of the specified PFN and the PAMT page pair PFNs. So simultaneous attempts on the same 2MB ranges of the PFNs would otherwise encounter an error, which would not be handleable in the put case.
The lock is global and heavyweight. Use simple conditional logic to keep correctness obvious. This will be optimized in a later change.
The dpamt_refcounts[] are atomic_t's. They do not strictly need to be because all access is protected by pamt_lock. The overhead of an atomic_t in this situation is minuscule compared to the global lock. Leave the atomic_t in place to enable future optimization with minimal churn.
Since the DPAMT helpers are broadly functional now, drop the "__" to rename them tdx_pamt_get/put() and tdx_alloc/free_control_page(). Export them for use in KVM in subsequent changes.
AI was used under supervision to collect/apply feedback, split patches, review code and workshop logs.
Based on a patch originally by Kiryl Shutsemau.
--- arch/x86/include/asm/tdx.h | 6 ++- arch/x86/virt/vmx/tdx/tdx.c | 102 +++++++++++++++++++---------------- 2 files changed, 63 insertions(+), 45 deletions(-)
arch/x86/include/asm/tdx.h +6 -0
@@ -120,12 +120,18 @@ static inline bool tdx_supports_runtime_update(const struct tdx_sys_info *sysinfbool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo); +int tdx_pamt_get (kvm_pfn_t pfn); +void tdx_pamt_put (kvm_pfn_t pfn); +int tdx_guest_keyid_alloc (void );u32 tdx_get_nr_guest_keyids (void );void tdx_guest_keyid_free (unsigned int keyid);void tdx_quirk_reset_paddr (unsigned long base,unsigned long size); +struct page *tdx_alloc_control_page (void ); +void tdx_free_control_page (struct page *page); +struct tdx_td {/* TD root structure: */ struct page *tdr_page;
arch/x86/virt/vmx/tdx/tdx.c +57 -45
193 lines not on this page · raw message
Rick Edgecombe
maintainerPATCH v11 6/11 KVM: TDX: Allocate PAMT memory for TD and vCPU control structures
In reply to Rick EdgecombeFrom: "Kirill A. Shutemov" <[email protected]>
Use control page helpers for allocating and freeing TD control structures, such that these operations can work for Dynamic PAMT.
The TDX module tracks some state for each page of physical memory that it might use. It calls this state the PAMT. It includes separate state for each page size a physical page could be utilized at within the TDX module (1GB, 2MB, 4KB). In Dynamic PAMT, only the 4KB page size state is allocated dynamically. So the kernel must ensure PAMT backing is installed for any 4KB page being gifted to the TDX module, and must tear down the backing when all associated gifted pages are reclaimed.
TD scoped control pages (TDR, TDCS) and vCPU scoped control pages (TDVPR, TDCX) are all handed to the TDX module at 4KB page size and are therefore subject to this requirement. Replace the raw alloc_page()/__free_page() calls for these pages with tdx_alloc/free_control_page().
Switching between special Dynamic PAMT operations or normal page alloc/free operations is handled internally in tdx_alloc/free_control_page(). So don't check for Dynamic PAMT around these calls. Just call them unconditionally. Similarly, drop the NULL checks before freeing, as tdx_free_control_page() handles NULL internally.
No functional change intended when DPAMT is not in use.
---
v7:
- Fixup tags (Sean)
- Missing word in log (Binbin)
- Log smoothness (Yan)
--- arch/x86/kvm/vmx/tdx.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-)
arch/x86/kvm/vmx/tdx.c +14 -21
@@ -362,7 +362,7 @@ static void tdx_reclaim_control_page(struct page *ctrl_page)if (tdx_reclaim_page (ctrl_page))return ; -__free_page (ctrl_page); +tdx_free_control_page (ctrl_page); }struct tdx_flush_vp_arg {
@@ -589,7 +589,7 @@ static void tdx_reclaim_td_control_pages(struct kvm *kvm)tdx_quirk_reset_paddr (page_to_phys (kvm_tdx->td.tdr_page),PAGE_SIZE ); -__free_page (kvm_tdx->td.tdr_page); +tdx_free_control_page (kvm_tdx->td.tdr_page); kvm_tdx->td.tdr_page =NULL ; }
@@ -2456,7 +2456,7 @@ static int __tdx_td_init(struct kvm *kvm, struct td_params *td_params, ret = -ENOMEM ; - tdr_page =alloc_page (GFP_KERNEL_ACCOUNT ); + tdr_page =tdx_alloc_control_page ();if (!tdr_page) goto free_hkid;
@@ -2469,7 +2469,7 @@ static int __tdx_td_init(struct kvm *kvm, struct td_params *td_params, goto free_tdr;for (i =0 ; i < kvm_tdx->td.tdcs_nr_pages; i++) { - tdcs_pages[i] =alloc_page (GFP_KERNEL_ACCOUNT ); + tdcs_pages[i] =tdx_alloc_control_page ();if (!tdcs_pages[i]) goto free_tdcs; }
@@ -2587,10 +2587,8 @@ static int __tdx_td_init(struct kvm *kvm, struct td_params *td_params, teardown:/* Only free pages not yet added, so start at 'i' */ for (; i < kvm_tdx->td.tdcs_nr_pages; i++) { -if (tdcs_pages[i]) { -__free_page (tdcs_pages[i]); - tdcs_pages[i] =NULL ; - } +tdx_free_control_page (tdcs_pages[i]); + tdcs_pages[i] =NULL ; }if (!kvm_tdx->td.tdcs_pages)kfree (tdcs_pages);
@@ -2605,16 +2603,13 @@ static int __tdx_td_init(struct kvm *kvm, struct td_params *td_params,free_cpumask_var (packages); free_tdcs: -for (i =0 ; i < kvm_tdx->td.tdcs_nr_pages; i++) { -if (tdcs_pages[i]) -__free_page (tdcs_pages[i]); - } +for (i =0 ; i < kvm_tdx->td.tdcs_nr_pages; i++) +tdx_free_control_page (tdcs_pages[i]);kfree (tdcs_pages); kvm_tdx->td.tdcs_pages =NULL ; free_tdr: -if (tdr_page) -__free_page (tdr_page); +tdx_free_control_page (tdr_page); kvm_tdx->td.tdr_page =NULL ; free_hkid:
@@ -2948,7 +2943,7 @@ static int tdx_td_vcpu_init(struct kvm_vcpu *vcpu, u64 vcpu_rcx)int ret, i;u64 err; - page =alloc_page (GFP_KERNEL_ACCOUNT ); + page =tdx_alloc_control_page ();if (!page)return -ENOMEM ; tdx->vp.tdvpr_page = page;
@@ -2968,7 +2963,7 @@ static int tdx_td_vcpu_init(struct kvm_vcpu *vcpu, u64 vcpu_rcx) }for (i =0 ; i < kvm_tdx->td.tdcx_nr_pages; i++) { - page =alloc_page (GFP_KERNEL_ACCOUNT ); + page =tdx_alloc_control_page ();if (!page) { ret = -ENOMEM ; goto free_tdcx;
@@ -2990,7 +2985,7 @@ static int tdx_td_vcpu_init(struct kvm_vcpu *vcpu, u64 vcpu_rcx)* method, but the rest are freed here. */ for (; i < kvm_tdx->td.tdcx_nr_pages; i++) { -__free_page (tdx->vp.tdcx_pages[i]); +tdx_free_control_page (tdx->vp.tdcx_pages[i]); tdx->vp.tdcx_pages[i] =NULL ; }return -EIO ;
@@ -3018,16 +3013,14 @@ static int tdx_td_vcpu_init(struct kvm_vcpu *vcpu, u64 vcpu_rcx) free_tdcx:for (i =0 ; i < kvm_tdx->td.tdcx_nr_pages; i++) { -if (tdx->vp.tdcx_pages[i]) -__free_page (tdx->vp.tdcx_pages[i]); +tdx_free_control_page (tdx->vp.tdcx_pages[i]); tdx->vp.tdcx_pages[i] =NULL ; }kfree (tdx->vp.tdcx_pages); tdx->vp.tdcx_pages =NULL ; free_tdvpr: -if (tdx->vp.tdvpr_page) -__free_page (tdx->vp.tdvpr_page); +tdx_free_control_page (tdx->vp.tdvpr_page); tdx->vp.tdvpr_page =NULL ; tdx->vp.tdvpr_pa =0 ;
Signature · 1 line
2.55.0
[tip: x86/tdx] KVM/TDX: Allocate PAMT memory for TD and vCPU control structures
The following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: 86305da521d1dcf44cb2a61140a3e78f390dd873 Gitweb: https://git.kernel.org/tip/86305da521d1dcf44cb2a61140a3e78f390dd873 Author: Kirill A. Shutemov <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:36 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:02 -07:00
KVM/TDX: Allocate PAMT memory for TD and vCPU control structures
Use control page helpers for allocating and freeing TD control structures, such that these operations can work for Dynamic PAMT.
The TDX module tracks some state for each page of physical memory that it might use. It calls this state the PAMT. It includes separate state for each page size a physical page could be utilized at within the TDX module (1GB, 2MB, 4KB). In Dynamic PAMT, only the 4KB page size state is allocated dynamically. So the kernel must ensure PAMT backing is installed for any 4KB page being gifted to the TDX module, and must tear down the backing when all associated gifted pages are reclaimed.
TD scoped control pages (TDR, TDCS) and vCPU scoped control pages (TDVPR, TDCX) are all handed to the TDX module at 4KB page size and are therefore subject to this requirement. Replace the raw alloc_page()/__free_page() calls for these pages with tdx_alloc/free_control_page().
Switching between special Dynamic PAMT operations or normal page alloc/free operations is handled internally in tdx_alloc/free_control_page(). So don't check for Dynamic PAMT around these calls. Just call them unconditionally. Similarly, drop the NULL checks before freeing, as tdx_free_control_page() handles NULL internally.
No functional change intended when DPAMT is not in use.
--- arch/x86/kvm/vmx/tdx.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-)
arch/x86/kvm/vmx/tdx.c +14 -21
@@ -362,7 +362,7 @@ static void tdx_reclaim_control_page(struct page *ctrl_page)if (tdx_reclaim_page (ctrl_page))return ; -__free_page (ctrl_page); +tdx_free_control_page (ctrl_page); }struct tdx_flush_vp_arg {
@@ -589,7 +589,7 @@ static void tdx_reclaim_td_control_pages(struct kvm *kvm)tdx_quirk_reset_paddr (page_to_phys (kvm_tdx->td.tdr_page),PAGE_SIZE ); -__free_page (kvm_tdx->td.tdr_page); +tdx_free_control_page (kvm_tdx->td.tdr_page); kvm_tdx->td.tdr_page =NULL ; }
@@ -2456,7 +2456,7 @@ static int __tdx_td_init(struct kvm *kvm, struct td_params *td_params, ret = -ENOMEM ; - tdr_page =alloc_page (GFP_KERNEL_ACCOUNT ); + tdr_page =tdx_alloc_control_page ();if (!tdr_page) goto free_hkid;
@@ -2469,7 +2469,7 @@ static int __tdx_td_init(struct kvm *kvm, struct td_params *td_params, goto free_tdr;for (i =0 ; i < kvm_tdx->td.tdcs_nr_pages; i++) { - tdcs_pages[i] =alloc_page (GFP_KERNEL_ACCOUNT ); + tdcs_pages[i] =tdx_alloc_control_page ();if (!tdcs_pages[i]) goto free_tdcs; }
@@ -2587,10 +2587,8 @@ static int __tdx_td_init(struct kvm *kvm, struct td_params *td_params, teardown:/* Only free pages not yet added, so start at 'i' */ for (; i < kvm_tdx->td.tdcs_nr_pages; i++) { -if (tdcs_pages[i]) { -__free_page (tdcs_pages[i]); - tdcs_pages[i] =NULL ; - } +tdx_free_control_page (tdcs_pages[i]); + tdcs_pages[i] =NULL ; }if (!kvm_tdx->td.tdcs_pages)kfree (tdcs_pages);
@@ -2605,16 +2603,13 @@ free_packages:free_cpumask_var (packages); free_tdcs: -for (i =0 ; i < kvm_tdx->td.tdcs_nr_pages; i++) { -if (tdcs_pages[i]) -__free_page (tdcs_pages[i]); - } +for (i =0 ; i < kvm_tdx->td.tdcs_nr_pages; i++) +tdx_free_control_page (tdcs_pages[i]);kfree (tdcs_pages); kvm_tdx->td.tdcs_pages =NULL ; free_tdr: -if (tdr_page) -__free_page (tdr_page); +tdx_free_control_page (tdr_page); kvm_tdx->td.tdr_page =NULL ; free_hkid:
@@ -2948,7 +2943,7 @@ static int tdx_td_vcpu_init(struct kvm_vcpu *vcpu, u64 vcpu_rcx)int ret, i;u64 err; - page =alloc_page (GFP_KERNEL_ACCOUNT ); + page =tdx_alloc_control_page ();if (!page)return -ENOMEM ; tdx->vp.tdvpr_page = page;
@@ -2968,7 +2963,7 @@ static int tdx_td_vcpu_init(struct kvm_vcpu *vcpu, u64 vcpu_rcx) }for (i =0 ; i < kvm_tdx->td.tdcx_nr_pages; i++) { - page =alloc_page (GFP_KERNEL_ACCOUNT ); + page =tdx_alloc_control_page ();if (!page) { ret = -ENOMEM ; goto free_tdcx;
@@ -2990,7 +2985,7 @@ static int tdx_td_vcpu_init(struct kvm_vcpu *vcpu, u64 vcpu_rcx)* method, but the rest are freed here. */ for (; i < kvm_tdx->td.tdcx_nr_pages; i++) { -__free_page (tdx->vp.tdcx_pages[i]); +tdx_free_control_page (tdx->vp.tdcx_pages[i]); tdx->vp.tdcx_pages[i] =NULL ; }return -EIO ;
@@ -3018,16 +3013,14 @@ static int tdx_td_vcpu_init(struct kvm_vcpu *vcpu, u64 vcpu_rcx) free_tdcx:for (i =0 ; i < kvm_tdx->td.tdcx_nr_pages; i++) { -if (tdx->vp.tdcx_pages[i]) -__free_page (tdx->vp.tdcx_pages[i]); +tdx_free_control_page (tdx->vp.tdcx_pages[i]); tdx->vp.tdcx_pages[i] =NULL ; }kfree (tdx->vp.tdcx_pages); tdx->vp.tdcx_pages =NULL ; free_tdvpr: -if (tdx->vp.tdvpr_page) -__free_page (tdx->vp.tdvpr_page); +tdx_free_control_page (tdx->vp.tdvpr_page); tdx->vp.tdvpr_page =NULL ; tdx->vp.tdvpr_pa =0 ;
Rick Edgecombe
maintainerPATCH v11 7/11 x86/virt/tdx: Add APIs to support Dynamic PAMT ops from KVM's fault path
In reply to Rick EdgecombeWhen handling an EPT violation, KVM holds a spinlock while manipulating the EPT. Before entering the spinlock it doesn't know how many EPT page tables will need to be installed or whether a huge page will be used. For this reason it allocates a worst case number of page tables that it might need as part of servicing the EPT violation.
Under Dynamic PAMT (DPAMT) these pre-allocated pages will potentially need to have DPAMT backing pages installed for them. KVM already has helpers to manage topping up page caches before taking the MMU lock, but they cannot be passed from KVM to arch/x86 code.
The problem of how and when to install the DPAMT backing pages for the pages given to the TDX module during the fault path has had a lot of design attempts.
- Extracting KVM's MMU caches requires too much inlined code added to headers.
- A few varieties of installing DPAMT backing when allocating the S-EPT page tables. (see links)
- Using mempool_t to transfer the pages between KVM and arch/x86 doesn't work because the component is designed more around maintaining a pool of pages, rather than topping up a continually drained cache.
So don't do these as they all had various problems. Instead just create a small simple data structure to use for handing a pre-allocated list of pages between KVM and arch/x86 code. Model this on KVM's existing MMU memory caches.
Add a tdx_pamt_cache arg to tdx_pamt_get() so it can draw pages from a cache when needed. Not all DPAMT page installations will happen under spinlock, for example TD and vCPU scoped control pages. So have tdx_pamt_get() maintain the existing behavior of allocating from the page allocator when NULL is passed for the struct tdx_pamt_cache arg. This prevents excess allocations for cases where it can be avoided.
Export the new helpers for KVM.
AI was used under supervision to review code and workshop logs.
---
v10:
- Change "Dynamic PAMT" to "DPAMT" in comments, and in the second reference in the logs. (Dave)
- x86/tdx -> x86/virt/tdx in title to match the others (AI nit checker)
v7:
- Log/comment tweaks (Yan)
- Drop Assisted-by tag and cover AI use in log (Dave)
v6:
- Filled out log from Sean's series
--- arch/x86/include/asm/tdx.h | 16 +++++++++- arch/x86/virt/vmx/tdx/tdx.c | 61 ++++++++++++++++++++++++++++++++++--- 2 files changed, 71 insertions(+), 6 deletions(-)
arch/x86/include/asm/tdx.h +15 -1
@@ -120,7 +120,21 @@ static inline bool tdx_supports_runtime_update(const struct tdx_sys_info *sysinfbool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo); -int tdx_pamt_get (kvm_pfn_t pfn); +/* Simple structure for pre-allocating DPAMT pages outside of spinlocks. */ +struct tdx_pamt_cache { +struct list_head page_list; +int cnt; +}; + +static inline void tdx_init_pamt_cache (struct tdx_pamt_cache *cache) +{ +INIT_LIST_HEAD (&cache->page_list); + cache->cnt =0 ; +} + +void tdx_free_pamt_cache (struct tdx_pamt_cache *cache); +int tdx_topup_pamt_cache (struct tdx_pamt_cache *cache,unsigned long npages); +int tdx_pamt_get (kvm_pfn_t pfn,struct tdx_pamt_cache *cache);void tdx_pamt_put (kvm_pfn_t pfn);int tdx_guest_keyid_alloc (void );
arch/x86/virt/vmx/tdx/tdx.c +56 -5
95 lines not on this page · raw message
Signature · 1 line
2.55.0
[tip: x86/tdx] x86/virt/tdx: Add APIs to support Dynamic PAMT ops from KVM's fault path
The following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: 2c8ca2ba9bb6aa277ec2af8e532f337ef12eb008 Gitweb: https://git.kernel.org/tip/2c8ca2ba9bb6aa277ec2af8e532f337ef12eb008 Author: Rick Edgecombe <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:37 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:02 -07:00
x86/virt/tdx: Add APIs to support Dynamic PAMT ops from KVM's fault path
When handling an EPT violation, KVM holds a spinlock while manipulating the EPT. Before entering the spinlock it doesn't know how many EPT page tables will need to be installed or whether a huge page will be used. For this reason it allocates a worst case number of page tables that it might need as part of servicing the EPT violation.
Under Dynamic PAMT (DPAMT) these pre-allocated pages will potentially need to have DPAMT backing pages installed for them. KVM already has helpers to manage topping up page caches before taking the MMU lock, but they cannot be passed from KVM to arch/x86 code.
The problem of how and when to install the DPAMT backing pages for the pages given to the TDX module during the fault path has had a lot of design attempts.
- Extracting KVM's MMU caches requires too much inlined code added to headers.
- A few varieties of installing DPAMT backing when allocating the S-EPT page tables. (see links)
- Using mempool_t to transfer the pages between KVM and arch/x86 doesn't work because the component is designed more around maintaining a pool of pages, rather than topping up a continually drained cache.
So don't do these as they all had various problems. Instead just create a small simple data structure to use for handing a pre-allocated list of pages between KVM and arch/x86 code. Model this on KVM's existing MMU memory caches.
Add a tdx_pamt_cache arg to tdx_pamt_get() so it can draw pages from a cache when needed. Not all DPAMT page installations will happen under spinlock, for example TD and vCPU scoped control pages. So have tdx_pamt_get() maintain the existing behavior of allocating from the page allocator when NULL is passed for the struct tdx_pamt_cache arg. This prevents excess allocations for cases where it can be avoided.
Export the new helpers for KVM.
AI was used under supervision to review code and workshop logs.
--- arch/x86/include/asm/tdx.h | 16 ++++++++- arch/x86/virt/vmx/tdx/tdx.c | 61 +++++++++++++++++++++++++++++++++--- 2 files changed, 71 insertions(+), 6 deletions(-)
arch/x86/include/asm/tdx.h +15 -1
@@ -120,7 +120,21 @@ static inline bool tdx_supports_runtime_update(const struct tdx_sys_info *sysinfbool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo); -int tdx_pamt_get (kvm_pfn_t pfn); +/* Simple structure for pre-allocating DPAMT pages outside of spinlocks. */ +struct tdx_pamt_cache { +struct list_head page_list; +int cnt; +}; + +static inline void tdx_init_pamt_cache (struct tdx_pamt_cache *cache) +{ +INIT_LIST_HEAD (&cache->page_list); + cache->cnt =0 ; +} + +void tdx_free_pamt_cache (struct tdx_pamt_cache *cache); +int tdx_topup_pamt_cache (struct tdx_pamt_cache *cache,unsigned long npages); +int tdx_pamt_get (kvm_pfn_t pfn,struct tdx_pamt_cache *cache);void tdx_pamt_put (kvm_pfn_t pfn);int tdx_guest_keyid_alloc (void );
arch/x86/virt/vmx/tdx/tdx.c +56 -5
95 lines not on this page · raw message
Rick Edgecombe
maintainerPATCH v11 8/11 KVM: TDX: Get/put PAMT pages when (un)mapping private memory
In reply to Rick EdgecombeFrom: "Kirill A. Shutemov" <[email protected]>
Add Dynamic PAMT support to KVM's S-EPT MMU by "getting" a PAMT page when adding guest memory (PAGE.ADD or PAGE.AUG), and "putting" the page when removing guest memory (PAGE.REMOVE).
To access the per-vCPU PAMT caches without plumbing @vcpu throughout the TDP MMU, begrudgingly use kvm_get_running_vcpu() to get the vCPU, and bug the VM if KVM attempts to set an S-EPT leaf without an active vCPU. KVM only supports creating _new_ mappings in page (pre)fault paths, all of which require an active vCPU.
The PAMT memory holds metadata for TDX protected memory. With Dynamic PAMT, PAMT_4K is allocated on demand. The kernel supplies the TDX module with a few pages that cover 2MB of host physical memory.
Releases are balanced via tdx_pamt_put(): every control-page free goes through tdx_free_control_page(), and guest data pages are put directly on the successful tdh_mem_page_remove() path and in the tdx_mem_page_add/aug() error path.
---
v8:
- Remove extra new line around *topup_external_cache() (Sean)
- Make +1/-1 logic clearer by just coding the easily optimizable math. (Nikolay, Sean)
- Do KVM_BUG_ON() on tdx_pamt_get() return. (Sean)
v7:
- Don't do to_tdx() before NULL check for readability (Binbin, Sean)
- Fixup tags (Sean)
- Export tdx_supports_dynamic_pamt() since it's used in KVM here and no longer an static inline.
--- arch/x86/include/asm/kvm-x86-ops.h | 1 + arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/mmu/mmu.c | 4 ++ arch/x86/kvm/vmx/tdx.c | 64 ++++++++++++++++++++++++++---- arch/x86/kvm/vmx/tdx.h | 2 + arch/x86/virt/vmx/tdx/tdx.c | 1 + 6 files changed, 65 insertions(+), 8 deletions(-)
arch/x86/include/asm/kvm-x86-ops.h +1 -0
@@ -99,6 +99,7 @@ KVM_X86_OP_OPTIONAL_RET0(tdp_has_smep) KVM_X86_OP(load_mmu_pgd) KVM_X86_OP_OPTIONAL_RET0(set_external_spte) KVM_X86_OP_OPTIONAL(free_external_spt) +KVM_X86_OP_OPTIONAL_RET0(topup_external_cache) KVM_X86_OP(has_wbinvd_exit) KVM_X86_OP(get_l2_tsc_offset) KVM_X86_OP(get_l2_tsc_multiplier)
arch/x86/include/asm/kvm_host.h +1 -0
@@ -1644,6 +1644,7 @@ struct kvm_x86_ops {/* Update external page tables for page table about to be freed. */ void (*free_external_spt)(struct kvm *kvm,struct kvm_mmu_page *sp); +int (*topup_external_cache)(struct kvm_vcpu *vcpu,int min_nr_spts);bool (*has_wbinvd_exit)(void );
arch/x86/kvm/mmu/mmu.c +4 -0
@@ -617,6 +617,10 @@ static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu, bool maybe_indirect) PT64_ROOT_MAX_LEVEL);if (r)return r; + + r =kvm_x86_call (topup_external_cache)(vcpu,PT64_ROOT_MAX_LEVEL ); +if (r) +return r; } r =kvm_mmu_topup_memory_cache (&vcpu->arch.mmu_shadow_page_cache,PT64_ROOT_MAX_LEVEL );
arch/x86/kvm/vmx/tdx.c +56 -8
147 lines not on this page · raw message
arch/x86/kvm/vmx/tdx.h +2 -0
@@ -72,6 +72,8 @@ struct vcpu_tdx {u64 map_gpa_next;u64 map_gpa_end; + +struct tdx_pamt_cache pamt_cache; };void tdh_vp_rd_failed (struct vcpu_tdx *tdx,char *uclass,u32 field,u64 err);
arch/x86/virt/vmx/tdx/tdx.c +1 -0
@@ -2049,6 +2049,7 @@ bool tdx_supports_dynamic_pamt(const struct tdx_sys_info *sysinfo)/* To be enabled when kernel is ready. */ return false; } +EXPORT_SYMBOL_FOR_KVM (tdx_supports_dynamic_pamt);static struct page *tdx_alloc_page_pamt_cache (struct tdx_pamt_cache *cache) {
Signature · 1 line
2.55.0
[tip: x86/tdx] KVM/TDX: Get/put PAMT pages when (un)mapping private memory
The following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: d7fe610e6a6638c3944b9e553b426efd527ec502 Gitweb: https://git.kernel.org/tip/d7fe610e6a6638c3944b9e553b426efd527ec502 Author: Kirill A. Shutemov <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:38 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:02 -07:00
KVM/TDX: Get/put PAMT pages when (un)mapping private memory
Add Dynamic PAMT support to KVM's S-EPT MMU by "getting" a PAMT page when adding guest memory (PAGE.ADD or PAGE.AUG), and "putting" the page when removing guest memory (PAGE.REMOVE).
To access the per-vCPU PAMT caches without plumbing @vcpu throughout the TDP MMU, begrudgingly use kvm_get_running_vcpu() to get the vCPU, and bug the VM if KVM attempts to set an S-EPT leaf without an active vCPU. KVM only supports creating _new_ mappings in page (pre)fault paths, all of which require an active vCPU.
The PAMT memory holds metadata for TDX protected memory. With Dynamic PAMT, PAMT_4K is allocated on demand. The kernel supplies the TDX module with a few pages that cover 2MB of host physical memory.
Releases are balanced via tdx_pamt_put(): every control-page free goes through tdx_free_control_page(), and guest data pages are put directly on the successful tdh_mem_page_remove() path and in the tdx_mem_page_add/aug() error path.
--- arch/x86/include/asm/kvm-x86-ops.h | 1 +- arch/x86/include/asm/kvm_host.h | 1 +- arch/x86/kvm/mmu/mmu.c | 4 ++- arch/x86/kvm/vmx/tdx.c | 64 +++++++++++++++++++++++++---- arch/x86/kvm/vmx/tdx.h | 2 +- arch/x86/virt/vmx/tdx/tdx.c | 1 +- 6 files changed, 65 insertions(+), 8 deletions(-)
arch/x86/include/asm/kvm-x86-ops.h +1 -0
@@ -99,6 +99,7 @@ KVM_X86_OP_OPTIONAL_RET0(tdp_has_smep) KVM_X86_OP(load_mmu_pgd) KVM_X86_OP_OPTIONAL_RET0(set_external_spte) KVM_X86_OP_OPTIONAL(free_external_spt) +KVM_X86_OP_OPTIONAL_RET0(topup_external_cache) KVM_X86_OP(has_wbinvd_exit) KVM_X86_OP(get_l2_tsc_offset) KVM_X86_OP(get_l2_tsc_multiplier)
arch/x86/include/asm/kvm_host.h +1 -0
@@ -1644,6 +1644,7 @@ struct kvm_x86_ops {/* Update external page tables for page table about to be freed. */ void (*free_external_spt)(struct kvm *kvm,struct kvm_mmu_page *sp); +int (*topup_external_cache)(struct kvm_vcpu *vcpu,int min_nr_spts);bool (*has_wbinvd_exit)(void );
arch/x86/kvm/mmu/mmu.c +4 -0
@@ -617,6 +617,10 @@ static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu, bool maybe_indirect) PT64_ROOT_MAX_LEVEL);if (r)return r; + + r =kvm_x86_call (topup_external_cache)(vcpu,PT64_ROOT_MAX_LEVEL ); +if (r) +return r; } r =kvm_mmu_topup_memory_cache (&vcpu->arch.mmu_shadow_page_cache,PT64_ROOT_MAX_LEVEL );
arch/x86/kvm/vmx/tdx.c +56 -8
147 lines not on this page · raw message
arch/x86/kvm/vmx/tdx.h +2 -0
@@ -72,6 +72,8 @@ struct vcpu_tdx {u64 map_gpa_next;u64 map_gpa_end; + +struct tdx_pamt_cache pamt_cache; };void tdh_vp_rd_failed (struct vcpu_tdx *tdx,char *uclass,u32 field,u64 err);
arch/x86/virt/vmx/tdx/tdx.c +1 -0
@@ -2049,6 +2049,7 @@ bool tdx_supports_dynamic_pamt(const struct tdx_sys_info *sysinfo)/* To be enabled when kernel is ready. */ return false; } +EXPORT_SYMBOL_FOR_KVM (tdx_supports_dynamic_pamt);static struct page *tdx_alloc_page_pamt_cache (struct tdx_pamt_cache *cache) {
[email protected]
AI reviewRe: [PATCH v11 08/11] KVM: TDX: Get/put PAMT pages when (un)mapping private memory
In reply to Rick EdgecombeThank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [High] The retry loop in `kvm_tdp_mmu_map_private_pfn` fails to top up memory caches on `RET_PF_RETRY`…
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] The retry loop in kvm_tdp_mmu_map_private_pfn fails to top up memory caches on RET_PF_RETRY, leading to a permanent infinite loop when pamt_cache is depleted. --
commit 346b744d7586de76e5cf17e0acaaeca78c9eea73
Author: Kiryl Shutsemau <[email protected]>
KVM: TDX: Get/put PAMT pages when (un)mapping private memory
This commit adds Dynamic PAMT support to KVM's S-EPT MMU by getting PAMT pages when adding guest memory and putting them when removing guest memory. It uses per-vCPU PAMT caches topped up via a new topup_external_cache op.
arch/x86/kvm/mmu/mmu.c static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu, bool maybe_indirect) · line 621
Quoted 13 lines
arch/x86/kvm/mmu/mmu.c +4
-0@@ -614,6 +614,10 @@ static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu, bool maybe_indirect) PT64_ROOT_MAX_LEVEL);if (r)return r; + + r =kvm_x86_call (topup_external_cache)(vcpu,PT64_ROOT_MAX_LEVEL ); +if (r) +return r; }
[Severity: High]
Does this code guarantee eventual cache exhaustion during page faults?
When a host userspace process initiates KVM_TDX_INIT_MEM_REGION, it calls kvm_tdp_mmu_map_private_pfn() in arch/x86/kvm/mmu/mmu.c. In that function, mmu_topup_memory_caches() is located outside the retry loop:
r = mmu_topup_memory_caches(vcpu, false);
if (r)
return r;
do {
if (signal_pending(current))
return -EINTR;
if (kvm_test_request(KVM_REQ_VM_DEAD, vcpu))
return -EIO;
cond_resched();
guard(read_lock)(&kvm->mmu_lock);
r = kvm_tdp_mmu_map(vcpu, &fault);
} while (r == RET_PF_RETRY);During kvm_tdp_mmu_map(), if tdh_mem_page_add() or tdh_mem_sept_add() encounters TDX_OPERAND_BUSY due to contention, tdx_pamt_put() frees the just-allocated PAMT page to the generic kernel buddy allocator instead of returning it to the cache.
kvm_tdp_mmu_map() then receives -EBUSY from tdp_mmu_set_spte_atomic() and translates it to RET_PF_RETRY. Because the topup is outside the loop, the pamt_cache is never replenished upon retry.
[ ... ]
Quoted 4 lines
arch/x86/kvm/vmx/tdx.c +0
-0
[ ... ]
Quoted 15 lines
arch/x86/kvm/vmx/tdx.c +5
-0@@ -1701,8 +1728,13 @@ static int tdx_sept_map_nonleaf_spte(struct kvm *kvm, gfn_t gfn,static int tdx_sept_map_leaf_spte (struct kvm *kvm,gfn_t gfn,enum pg_level level,u64 new_spte) { +struct kvm_vcpu *vcpu =kvm_get_running_vcpu ();struct kvm_tdx *kvm_tdx =to_kvm_tdx (kvm);kvm_pfn_t pfn =spte_to_pfn (new_spte); +int ret; + +if (KVM_BUG_ON (!vcpu, kvm)) +return -EIO ;/* TODO: handle large pages. */ if (KVM_BUG_ON (level !=PG_LEVEL_4K , kvm))
arch/x86/kvm/vmx/tdx.c static int tdx_sept_map_leaf_spte(struct kvm *kvm, gfn_t gfn, enum pg_level leve · line 1747
Quoted 6 lines
arch/x86/kvm/vmx/tdx.c +3
-0@@ -1710,6 +1742,10 @@ static int tdx_sept_map_leaf_spte(struct kvm *kvm, gfn_t gfn, enum pg_level leveWARN_ON_ONCE ((new_spte &VMX_EPT_RWX_MASK ) !=VMX_EPT_RWX_MASK ); + ret =tdx_pamt_get (pfn, &to_tdx (vcpu)->pamt_cache); +if (KVM_BUG_ON (ret, kvm)) +return ret;
[Severity: High]
Does this failure path cause a permanent infinite loop?
After the cache is completely drained due to the missing topups on retry, alloc_dpamt_page() in arch/x86/virt/vmx/tdx/tdx.c returns NULL because it lacks a GFP_ATOMIC fallback for a non-NULL cache:
static struct page *alloc_dpamt_page(struct tdx_pamt_cache *cache)
{
if (cache)
return tdx_alloc_page_pamt_cache(cache);
return alloc_page(GFP_KERNEL_ACCOUNT);
}Consequently, tdx_pamt_get() fails with -ENOMEM. This is subsequently treated as a retryable error by tdp_mmu_map_handle_target_level() which returns RET_PF_RETRY.
This causes the host kernel thread executing the page population ioctl to blindly repeat forever, creating a viable denial of service vector for unprivileged host userspace.
[ ... ]
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=8
Rick Edgecombe
maintainerPATCH v11 9/11 x86/virt/tdx: Enable Dynamic PAMT
In reply to Rick EdgecombeThe Physical Address Metadata Table (PAMT) holds TDX metadata for physical memory and must be allocated by the kernel during TDX module initialization. Dynamic PAMT (DPAMT) is a TDX module feature that can reduce this memory use by allocating part of the PAMT dynamically.
DPAMT's memory savings are significant enough to make it a good default configuration. So turn it on whenever the TDX module reports support.
There is a TDX module bug where on unusual BIOS keyid configurations, the TDX module reports DPAMT as supported even when it can't handle it. Expect this not to be an issue in practice and don't attempt to work around it on the kernel side.
The feature increases the kernel size by 2KB (when TDX is configured in the build).
Based on a patch originally by Kiryl Shutsemau.
---
v11:
- Drop kernel param (Dave)
v10:
- Change "Dynamic PAMT" to "DPAMT" at the second reference in the logs. (Dave)
- Adjust tdx_supports_dynamic_pamt() to check multiple conditions in a more tip style. (AI nit checker)
v8:
- Order tdx_dpamt in kernel-parameters.txt (Sohil)
- Make tdx_enable_dpamt static (Sashiko)
--- arch/x86/include/asm/tdx.h | 1 + arch/x86/virt/vmx/tdx/tdx.c | 11 +++++++++-- 2 files changed, 10 insertions(+), 2 deletions(-)
arch/x86/include/asm/tdx.h +1 -0
@@ -36,6 +36,7 @@/* Bit definitions of TDX_FEATURES0 metadata field */ #define TDX_FEATURES0_TD_PRESERVING BIT_ULL(1)#define TDX_FEATURES0_NO_RBP_MOD BIT_ULL(18) +#define TDX_FEATURES0_DYNAMIC_PAMT BIT_ULL(36)#ifndef __ASSEMBLER__
arch/x86/virt/vmx/tdx/tdx.c +9 -2
@@ -1031,6 +1031,8 @@ static __init int construct_tdmrs(struct list_head *tmb_list,return ret; } +#define TDX_SYS_CONFIG_DYNAMIC_PAMT BIT(16) +static __init int config_tdx_module (struct tdmr_info_list *tdmr_list,u64 global_keyid) {
@@ -1059,6 +1061,12 @@ static __init int config_tdx_module(struct tdmr_info_list *tdmr_list, args.rcx =__pa (tdmr_pa_array); args.rdx = tdmr_list->nr_consumed_tdmrs; args.r8 = global_keyid; + +if (tdx_supports_dynamic_pamt (&tdx_sysinfo)) { +pr_info ("Enable Dynamic PAMT\n" ); + args.r8 |=TDX_SYS_CONFIG_DYNAMIC_PAMT ; + } + ret =seamcall_prerr (TDH_SYS_CONFIG , &args);/* Free the array as it is not required anymore. */
@@ -2046,8 +2054,7 @@ EXPORT_SYMBOL_FOR_KVM(tdh_phymem_page_wbinvd_hkid);bool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo) { -/* To be enabled when kernel is ready. */ -return false; +return sysinfo->features.tdx_features0 &TDX_FEATURES0_DYNAMIC_PAMT ; }EXPORT_SYMBOL_FOR_KVM (tdx_supports_dynamic_pamt);
Signature · 1 line
2.55.0
[email protected]
AI reviewRe: [PATCH v11 09/11] x86/virt/tdx: Enable Dynamic PAMT
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider: - [Medium] Dynamically allocated PAMT pages (DPAMT) are not recognized by `is_pamt_page()`, causing Machine…
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Dynamically allocated PAMT pages (DPAMT) are not recognized by is_pamt_page(), causing Machine Check Exceptions (MCEs) on these pages to be misclassified as generic memory errors. --
commit 4f5c2aeed6b267952a921a886ea2792c5ac1fb4a
Author: Rick Edgecombe <[email protected]> Date: Fri Sep 4 21:58:39 2026 +0000
x86/virt/tdx: Enable Dynamic PAMT
The Physical Address Metadata Table (PAMT) holds TDX metadata for physical memory and must be allocated by the kernel during TDX module initialization. This commit enables Dynamic PAMT (DPAMT) to reduce this memory use by allocating part of the PAMT dynamically when the TDX module reports support.
Quoted 4 lines
arch/x86/virt/vmx/tdx/tdx.c +0
-0
[ ... ]
arch/x86/virt/vmx/tdx/tdx.c static __init int config_tdx_module(struct tdmr_info_list *tdmr_list, · line 1069
Quoted 10 lines
arch/x86/virt/vmx/tdx/tdx.c +6
-0@@ -1059,6 +1061,12 @@ static __init int config_tdx_module(struct tdmr_info_list *tdmr_list, args.rcx =__pa (tdmr_pa_array); args.rdx = tdmr_list->nr_consumed_tdmrs; args.r8 = global_keyid; + +if (tdx_supports_dynamic_pamt (&tdx_sysinfo)) { +pr_info ("Enable Dynamic PAMT\n" ); + args.r8 |=TDX_SYS_CONFIG_DYNAMIC_PAMT ; + } +
[Severity: Medium]
Will enabling Dynamic PAMT cause Machine Check Exceptions on DPAMT pages to be misclassified?
Looking at is_pamt_page() in arch/x86/virt/vmx/tdx/tdx.c, it seems to only iterate over statically configured TDMR PAMTs:
arch/x86/virt/vmx/tdx/tdx.c:is_pamt_page() {
...
for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++) {
unsigned long base, size;
tdmr_get_pamt(tdmr_entry(tdmr_list, i), &base, &size);
if (phys >= base && phys < (base + size))
return true;
}
return false;
}If a Machine Check Exception occurs on a dynamically allocated PAMT page, is_pamt_page() will return false since it ignores dynamic PAMT pages.
Will this cause the hardware error to be treated as a generic memory error instead of a TDX private memory error, thereby omitting the debug logs for TDX memory corruption?
Quoted 3 lines
arch/x86/virt/vmx/tdx/tdx.c +0
-0ret =seamcall_prerr (TDH_SYS_CONFIG , &args);/* Free the array as it is not required anymore. */
Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=9
[tip: x86/tdx] x86/virt/tdx: Enable Dynamic PAMT
In reply to Rick EdgecombeThe following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: 1e3d7913532723b3cb73cc70d04e7bf7f6430fed Gitweb: https://git.kernel.org/tip/1e3d7913532723b3cb73cc70d04e7bf7f6430fed Author: Rick Edgecombe <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:39 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:02 -07:00
x86/virt/tdx: Enable Dynamic PAMT
The Physical Address Metadata Table (PAMT) holds TDX metadata for physical memory and must be allocated by the kernel during TDX module initialization. Dynamic PAMT (DPAMT) is a TDX module feature that can reduce this memory use by allocating part of the PAMT dynamically.
DPAMT's memory savings are significant enough to make it a good default configuration. So turn it on whenever the TDX module reports support.
There is a TDX module bug where on unusual BIOS keyid configurations, the TDX module reports DPAMT as supported even when it can't handle it. Expect this not to be an issue in practice and don't attempt to work around it on the kernel side.
The feature increases the kernel size by 2KB (when TDX is configured in the build).
Based on a patch originally by Kiryl Shutsemau.
--- arch/x86/include/asm/tdx.h | 1 + arch/x86/virt/vmx/tdx/tdx.c | 11 +++++++++-- 2 files changed, 10 insertions(+), 2 deletions(-)
arch/x86/include/asm/tdx.h +1 -0
@@ -36,6 +36,7 @@/* Bit definitions of TDX_FEATURES0 metadata field */ #define TDX_FEATURES0_TD_PRESERVING BIT_ULL(1)#define TDX_FEATURES0_NO_RBP_MOD BIT_ULL(18) +#define TDX_FEATURES0_DYNAMIC_PAMT BIT_ULL(36)#ifndef __ASSEMBLER__
arch/x86/virt/vmx/tdx/tdx.c +9 -2
@@ -1031,6 +1031,8 @@ static __init int construct_tdmrs(struct list_head *tmb_list,return ret; } +#define TDX_SYS_CONFIG_DYNAMIC_PAMT BIT(16) +static __init int config_tdx_module (struct tdmr_info_list *tdmr_list,u64 global_keyid) {
@@ -1059,6 +1061,12 @@ static __init int config_tdx_module(struct tdmr_info_list *tdmr_list, args.rcx =__pa (tdmr_pa_array); args.rdx = tdmr_list->nr_consumed_tdmrs; args.r8 = global_keyid; + +if (tdx_supports_dynamic_pamt (&tdx_sysinfo)) { +pr_info ("Enable Dynamic PAMT\n" ); + args.r8 |=TDX_SYS_CONFIG_DYNAMIC_PAMT ; + } + ret =seamcall_prerr (TDH_SYS_CONFIG , &args);/* Free the array as it is not required anymore. */
@@ -2046,8 +2054,7 @@ EXPORT_SYMBOL_FOR_KVM(tdh_phymem_page_wbinvd_hkid);bool tdx_supports_dynamic_pamt (const struct tdx_sys_info *sysinfo) { -/* To be enabled when kernel is ready. */ -return false; +return sysinfo->features.tdx_features0 &TDX_FEATURES0_DYNAMIC_PAMT ; }EXPORT_SYMBOL_FOR_KVM (tdx_supports_dynamic_pamt);
Rick Edgecombe
maintainerPATCH v11 10/11 Documentation/x86: Add documentation for TDX's Dynamic PAMT
In reply to Rick EdgecombeExpand TDX documentation to include information on the Dynamic PAMT feature.
The new section explains PAMT support in the TDX module and how Dynamic PAMT affects the kernel memory use.
Some of the docs verbiage was provided by Dave Hansen (see link). AI was used under supervision to review the docs.
Based on a patch originally by Kiryl Shutsemau.
---
v11:
- Drop docs about kernel arg since arg itself was removed. (Dave)
v10:
- Updated verbiage from Dave, but unify 4k to 4KB to be consistent with the rest of the series.
v7:
- Spell out PAMT acronym (Binbin)
- Drop Assisted-by tag and cover AI use in log (Dave)
- Add info about kernel parameter
--- Documentation/arch/x86/tdx.rst | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
Documentation/arch/x86/tdx.rst +21 -0
@@ -200,6 +200,27 @@ reflects the TCB of the currently running TDX module and therefore changes after an update. By contrast, TEE_TCB_SVN reflects the TCB at TD launch time and is not affected. +Dynamic PAMT +------------ + +The Physical Address Metadata Table (PAMT) is metadata in which the TDX +module keeps data about each physical page (think struct page). Space +for it is allocated by the VMM, consumes up to about 0.4% of system +memory and needs to be supplied to the TDX module when the TDX module is +first loaded. + +Dynamic PAMT is an add-on feature that allows a VMM to dynamically +allocate the part of the PAMT which tracks 4KB pages. This reduces the +amount of memory that TDX consumes while TDs are not in use. + +When Dynamic PAMT is in use, dmesg shows it like:: + + [..] virt/tdx: Enable Dynamic PAMT + [..] virt/tdx: 10092 KB allocated for PAMT + [..] virt/tdx: TDX-Module initialized + +Dynamic PAMT is enabled automatically if supported. + TDX Interaction to Other Kernel Components ------------------------------------------
Signature · 1 line
2.55.0
[tip: x86/tdx] Documentation/x86: Add documentation for TDX's Dynamic PAMT
The following commit has been merged into the x86/tdx branch of tip:
The following commit has been merged into the x86/tdx branch of tip:
Commit-ID: e61c837817acde1df7ebd977b798683a3d9b0dda Gitweb: https://git.kernel.org/tip/e61c837817acde1df7ebd977b798683a3d9b0dda Author: Rick Edgecombe <[email protected]> AuthorDate: Fri, 04 Sep 2026 14:58:40 -07:00 Committer: Dave Hansen <[email protected]> CommitterDate: Fri, 04 Sep 2026 15:06:03 -07:00
Documentation/x86: Add documentation for TDX's Dynamic PAMT
Expand TDX documentation to include information on the Dynamic PAMT feature.
The new section explains PAMT support in the TDX module and how Dynamic PAMT affects the kernel memory use.
Some of the docs verbiage was provided by Dave Hansen (see link). AI was used under supervision to review the docs.
Based on a patch originally by Kiryl Shutsemau.
--- Documentation/arch/x86/tdx.rst | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
Documentation/arch/x86/tdx.rst +21 -0
@@ -200,6 +200,27 @@ reflects the TCB of the currently running TDX module and therefore changes after an update. By contrast, TEE_TCB_SVN reflects the TCB at TD launch time and is not affected. +Dynamic PAMT +------------ + +The Physical Address Metadata Table (PAMT) is metadata in which the TDX +module keeps data about each physical page (think struct page). Space +for it is allocated by the VMM, consumes up to about 0.4% of system +memory and needs to be supplied to the TDX module when the TDX module is +first loaded. + +Dynamic PAMT is an add-on feature that allows a VMM to dynamically +allocate the part of the PAMT which tracks 4KB pages. This reduces the +amount of memory that TDX consumes while TDs are not in use. + +When Dynamic PAMT is in use, dmesg shows it like:: + + [..] virt/tdx: Enable Dynamic PAMT + [..] virt/tdx: 10092 KB allocated for PAMT + [..] virt/tdx: TDX-Module initialized + +Dynamic PAMT is enabled automatically if supported. + TDX Interaction to Other Kernel Components ------------------------------------------
Rick Edgecombe
maintainerPATCH v11 11/11 x86/virt/tdx: Optimize tdx_pamt_get/put()
In reply to Rick EdgecombeThe Dynamic PAMT (DPAMT) get/put helpers use a global spinlock to serialize all refcount updates and SEAMCALL invocations. This gives correct behavior for concurrent callers, but leads to contention. It is especially bad from the KVM side, which is designed to allow faulting in EPT under a shared lock. With the global spinlock, not only is the lock an exclusive one, but it is for all TDs instead of just a single one.
But taking the global lock each time is actually unnecessary. Only the 0->1 and 1->0 refcount transitions actually need the lock (to pair with SEAMCALLs that actually add and remove with the DPAMT pages). The common case of incrementing or decrementing a non-zero refcount can be done locklessly.
So create a fast and slow path. Check the refcount outside the lock and only take it for the slow path (0->1 and 1->0 transitions).
On the put side make the refcount adjustment and lock taking atomic so if a 'get' happens between them, it doesn't cause the DPAMT to be freed incorrectly. On the get side there is no technique for doing the refcount adjustment and lock atomically, so check the refcount again inside the lock.
AI was used under supervision to collect/apply feedback, review code and workshop logs. It assisted in identifying/evaluating the stale conditionals for the races resolved from the atomic_dec_and_lock() change. Separate from atomic_dec_and_lock() fallout, it suggested to change atomic_inc() to atomic_set(pamt_refcount, 1) in the put error path for the sake of being more precise, which Kiryl had also suggested in the past. The model also suggested updated comments following the atomic_dec_and_lock() change based on some directed prompting. The comments were subsequently edited or further prompted for fine tuning.
Based on a patch originally by Kiryl Shutsemau.
---
v10:
- Change "Dynamic PAMT" to "DPAMT" in comments. (Dave)
v7:
- Drop Assisted-by tag and cover AI use in log. (Dave)
- Move to end of the series.
- Use atomic_inc_not_zero() in this patch inside the spin_lock(), as suggested on the non-optimized patch by (Dave).
v6:
- Fix "tdx_pamt_add()" typo to "tdx_pamt_get()" in lost-race comment
- Fix error path bug: set ret = -EIO and use WARN_ON_ONCE() instead of pr_err() for unexpected PAMT.ADD failures (Sean)
- Use "set the refcount 0->1" wording to match atomic_set() usage
- Wrap comments to 80 columns
- Switch to atomic_dec_and_lock() and remove handling of races that are no longer needed as a result. Adjust comments as appropriate. (Dave)
- Adjustments from dropping error helper patches
--- arch/x86/virt/vmx/tdx/tdx.c | 44 ++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 15 deletions(-)
arch/x86/virt/vmx/tdx/tdx.c +29 -15
@@ -2171,28 +2171,41 @@ int tdx_pamt_get(kvm_pfn_t pfn, struct tdx_pamt_cache *cache)if (!tdx_supports_dynamic_pamt (&tdx_sysinfo))return 0 ; - ret =alloc_pamt_array (pamt_pages, cache); -if (ret) -return ret; - dpamt_refcount =tdx_find_dpamt_refcount (pfn); -spin_lock (&dpamt_lock); -/* * If the DPAMT entry is already added (i.e. refcount >= 1), * then just increment the refcount. */ +if (atomic_inc_not_zero (dpamt_refcount)) +return 0 ; + + ret =alloc_pamt_array (pamt_pages, cache); +if (ret) +return ret; + +spin_lock (&dpamt_lock); + +/* +* Unlike tdx_pamt_put() which uses atomic_dec_and_lock() to +* atomically handle the 1->0 transition, the get side has no +* equivalent combined primitive for 0->1. Recheck under the +* lock since another get may have already done the 0->1 +* transition after both saw atomic_inc_not_zero() fail. +*/ if (atomic_inc_not_zero (dpamt_refcount)) goto out_free; -/* Try to add the PAMT page and take the refcount 0->1. */ tdx_status =tdh_phymem_pamt_add (pfn, pamt_pages);if (WARN_ON_ONCE (tdx_status !=TDX_SUCCESS )) { ret = -EIO ; goto out_free; } +/* +* The refcount is zero, and this locked path is the +* only way to increase it from 0->1. +*/ atomic_set (dpamt_refcount,1 );spin_unlock (&dpamt_lock);return 0 ;
@@ -2217,17 +2230,13 @@ void tdx_pamt_put(kvm_pfn_t pfn) dpamt_refcount =tdx_find_dpamt_refcount (pfn); -spin_lock (&dpamt_lock);/* * If there is more than 1 reference on the DPAMT entry, don't * remove it yet. Just decrement the refcount. */ -if (atomic_read (dpamt_refcount) >1 ) { -atomic_dec (dpamt_refcount); - goto out_unlock; - } +if (!atomic_dec_and_lock (dpamt_refcount, &dpamt_lock)) +return ; -/* Try to remove the pamt page and take the refcount 1->0. */ tdx_status =tdh_phymem_pamt_remove (pfn, pamt_pages);/*
@@ -2237,10 +2246,15 @@ void tdx_pamt_put(kvm_pfn_t pfn)* failure indicates a kernel bug, memory is being leaked, and * the dangling DPAMT entry may cause future operations to fail. */ -if (WARN_ON_ONCE (tdx_status !=TDX_SUCCESS )) +if (WARN_ON_ONCE (tdx_status !=TDX_SUCCESS )) { +/* +* atomic_dec_and_lock() already decremented it to 0, +* but the DPAMT entry still exists since REMOVE failed. +*/ +atomic_set (dpamt_refcount,1 ); goto out_unlock; + } -atomic_set (dpamt_refcount,0 );spin_unlock (&dpamt_lock);free_pamt_array (pamt_pages);return ;
Signature · 1 line
2.55.0