FAILED: patch "[PATCH] power: supply: rt9455: quiesce delayed work before teardown" failed to apply to 6.1-stable tree

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 3e7a1ebc32fad5a558254a478efd401c17a24381
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026090322-duller-precut-e80c@gregkh' --subject-prefix 'PATCH 6.1.y' 'HEAD^..'

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3e7a1ebc32fad5a558254a478efd401c17a24381 Mon Sep 17 00:00:00 2001
From: Fan Wu <[email protected]>
Date: Thu, 23 Jul 2026 22:53:10 +0000
Subject: [PATCH] power: supply: rt9455: quiesce delayed work before teardown

The threaded IRQ handler can queue pwr_rdy_work, max_charging_time_work and batt_presence_work. pwr_rdy_work and batt_presence_work can also queue max_charging_time_work, while batt_presence_work can requeue itself.

rt9455_remove() cancels max_charging_time_work before batt_presence_work. The latter can therefore queue max_charging_time_work after it has already been cancelled:

rt9455_remove() workqueue
cancel pwr_rdy_work
cancel max_charging_time_work
batt_presence_work queues
max_charging_time_work
cancel batt_presence_work
return
devres frees rt9455_info
max_charging_time_work dereferences
rt9455_info

The IRQ also remains registered until devres cleanup and can queue more work after any of the cancellation calls. If rt9455_hw_init() fails after the IRQ has been requested, probe returns without cancelling work that may already have been queued. A pending callback can then access rt9455_info after it has been freed.

Register rt9455_cancel_all_delayed_works() through devm_add_action_or_reset() right after devm_power_supply_register(). devres invokes the action in reverse registration order, after the managed IRQ has been freed and before rt9455_info is released, so the delayed works are drained in both rt9455_remove() and the probe error path. Cancel pwr_rdy_work and batt_presence_work before max_charging_time_work because both can queue the latter.

This issue was found by an in-house static analysis tool.

index 4f3a799db654..313a7371211e 100644
@@ -1582,6 +1582,19 @@ static const struct regmap_config rt9455_regmap_config = {
 	.cache_type	= REGCACHE_MAPLE,
 };
 
+static void rt9455_cancel_all_delayed_works(void *data)
+{
+	struct rt9455_info *info = data;
+
+	/*
+	 * Both pwr_rdy_work and batt_presence_work can queue
+	 * max_charging_time_work, so cancel them first.
+	 */
+	cancel_delayed_work_sync(&info->pwr_rdy_work);
+	cancel_delayed_work_sync(&info->batt_presence_work);
+	cancel_delayed_work_sync(&info->max_charging_time_work);
+}
+
 static int rt9455_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;

@@ -1672,6 +1685,10 @@ static int rt9455_probe(struct i2c_client *client)
 		goto put_usb_notifier;
 	}
 
+	ret = devm_add_action_or_reset(dev, rt9455_cancel_all_delayed_works, info);
+	if (ret)
+		goto put_usb_notifier;
+
 	ret = devm_request_threaded_irq(dev, client->irq, NULL,
 					rt9455_irq_handler_thread,
 					IRQF_TRIGGER_LOW | IRQF_ONESHOT,

@@ -1710,10 +1727,6 @@ static void rt9455_remove(struct i2c_client *client)
 	if (info->nb.notifier_call)
 		usb_unregister_notifier(info->usb_phy, &info->nb);
 #endif
-
-	cancel_delayed_work_sync(&info->pwr_rdy_work);
-	cancel_delayed_work_sync(&info->max_charging_time_work);
-	cancel_delayed_work_sync(&info->batt_presence_work);
 }
 
 static const struct i2c_device_id rt9455_i2c_id_table[] = {

From: Uwe Kleine-König <[email protected]>

[ Upstream commit 2adfc4370ebb745380a44c3e5418486a32a9ba67 ]

The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted.

Stable-dep-of: 3e7a1ebc32fa ("power: supply: rt9455: quiesce delayed work before teardown")

---
 drivers/power/supply/rt9455_charger.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

index 566243a423c8f..dd4ff038814f4 100644
@@ -1583,8 +1583,7 @@ static const struct regmap_config rt9455_regmap_config = {
 	.cache_type	= REGCACHE_RBTREE,
 };
 
-static int rt9455_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int rt9455_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
 	struct device *dev = &client->dev;

@@ -1741,7 +1740,7 @@ MODULE_DEVICE_TABLE(acpi, rt9455_i2c_acpi_match);
 #endif
 
 static struct i2c_driver rt9455_driver = {
-	.probe		= rt9455_probe,
+	.probe_new	= rt9455_probe,
 	.remove		= rt9455_remove,
 	.id_table	= rt9455_i2c_id_table,
 	.driver = {

2.53.0

From: Fan Wu <[email protected]>

[ Upstream commit 3e7a1ebc32fad5a558254a478efd401c17a24381 ]

The threaded IRQ handler can queue pwr_rdy_work, max_charging_time_work and batt_presence_work. pwr_rdy_work and batt_presence_work can also queue max_charging_time_work, while batt_presence_work can requeue itself.

rt9455_remove() cancels max_charging_time_work before batt_presence_work. The latter can therefore queue max_charging_time_work after it has already been cancelled:

rt9455_remove() workqueue
cancel pwr_rdy_work
cancel max_charging_time_work
batt_presence_work queues
max_charging_time_work
cancel batt_presence_work
return
devres frees rt9455_info
max_charging_time_work dereferences
rt9455_info

The IRQ also remains registered until devres cleanup and can queue more work after any of the cancellation calls. If rt9455_hw_init() fails after the IRQ has been requested, probe returns without cancelling work that may already have been queued. A pending callback can then access rt9455_info after it has been freed.

Register rt9455_cancel_all_delayed_works() through devm_add_action_or_reset() right after devm_power_supply_register(). devres invokes the action in reverse registration order, after the managed IRQ has been freed and before rt9455_info is released, so the delayed works are drained in both rt9455_remove() and the probe error path. Cancel pwr_rdy_work and batt_presence_work before max_charging_time_work because both can queue the latter.

This issue was found by an in-house static analysis tool.

---
 drivers/power/supply/rt9455_charger.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

index dd4ff038814f4..62ffc3acc2aec 100644
@@ -1583,6 +1583,19 @@ static const struct regmap_config rt9455_regmap_config = {
 	.cache_type	= REGCACHE_RBTREE,
 };
 
+static void rt9455_cancel_all_delayed_works(void *data)
+{
+	struct rt9455_info *info = data;
+
+	/*
+	 * Both pwr_rdy_work and batt_presence_work can queue
+	 * max_charging_time_work, so cancel them first.
+	 */
+	cancel_delayed_work_sync(&info->pwr_rdy_work);
+	cancel_delayed_work_sync(&info->batt_presence_work);
+	cancel_delayed_work_sync(&info->max_charging_time_work);
+}
+
 static int rt9455_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;

@@ -1673,6 +1686,10 @@ static int rt9455_probe(struct i2c_client *client)
 		goto put_usb_notifier;
 	}
 
+	ret = devm_add_action_or_reset(dev, rt9455_cancel_all_delayed_works, info);
+	if (ret)
+		goto put_usb_notifier;
+
 	ret = devm_request_threaded_irq(dev, client->irq, NULL,
 					rt9455_irq_handler_thread,
 					IRQF_TRIGGER_LOW | IRQF_ONESHOT,

@@ -1713,10 +1730,6 @@ static void rt9455_remove(struct i2c_client *client)
 	if (info->nb.notifier_call)
 		usb_unregister_notifier(info->usb_phy, &info->nb);
 #endif
-
-	cancel_delayed_work_sync(&info->pwr_rdy_work);
-	cancel_delayed_work_sync(&info->max_charging_time_work);
-	cancel_delayed_work_sync(&info->batt_presence_work);
 }
 
 static const struct i2c_device_id rt9455_i2c_id_table[] = {

2.53.0