Skip to contentSkip to conversation

media: docs: Fix bracket

PATCH In review Manuel Ebner 1 participant 2 messages Sep 9 – Nov 3 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 media: docs: Fix bracket

Remove needless '('.

---
 Documentation/userspace-api/media/dvb/fe-set-voltage.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/userspace-api/media/dvb/fe-set-voltage.rst +1 -1
index 4d09ca587..d780e67d7 100644
@@ -37,7 +37,7 @@ cable to 13V, 18V or off.
 Usually, a satellite antenna subsystems require that the digital TV
 device to send a DC voltage to feed power to the LNBf. Depending on the
 LNBf type, the polarization or the intermediate frequency (IF) of the
-LNBf can controlled by the voltage level. Other devices (for example,
+LNBf can controlled by the voltage level. Other devices for example,
 the ones that implement DISEqC and multipoint LNBf's don't need to
 control the voltage level, provided that either 13V or 18V is sent to
 power up the LNBf.
Signature · 1 line
2.54.0
#1 lore raw

Hi,

Can I do anything to get following patch applied?

Thanks
Manuel

Quoted 20 lines · Manuel Ebner

Remove needless '('.

---
 Documentation/userspace-api/media/dvb/fe-set-voltage.rst | 2 +-

 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/userspace-api/media/dvb/fe-set-voltage.rst +0 -0
index 4d09ca587..d780e67d7 100644
@@ -37,7 +37,7 @@ cable to 13V, 18V or off.

 Usually, a satellite antenna subsystems require that the digital TV device to send a DC voltage to feed power to the LNBf. Depending on the LNBf type, the polarization or the intermediate frequency (IF) of the

Documentation/userspace-api/media/dvb/fe-set-voltage.rst +1 -1
-LNBf can controlled by the voltage level. Other devices (for example,
+LNBf can controlled by the voltage level. Other devices for example,

 the ones that implement DISEqC and multipoint LNBf's don't need to control the voltage level, provided that either 13V or 18V is sent to power up the LNBf.