Add support for MT8196 video encoder
Subsystems (4)
v8 cover Add support for MT8196 video encoder
This series adds support for the MT8196 video encoder.
Patch 1 adds the device-tree binding changes.
Patch 2 adds the new encoder platform data.
Patches 3 through 5 add a new encoder driver interface for VCP firmware. Patch 6 adds the MT8196 compatible data.
The v4l2-compliance result for the encoder is:
Total for mtk-vcodec-enc device /dev/video3: 47, Succeeded: 46,
Failed: 1, Warnings: 0
The one failed test is not caused by this series:
fail: v4l2-test-controls.cpp(1171):
node->codec_mask & STATEFUL_ENCODER
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
This series depends on the MT8196 video decoder v6 series [1]. The decoder series retains the "Add MediaTek VCP remoteproc driver support" v4 prerequisite [2].
[1] https://patchwork.linuxtv.org/project/linux-media/list/?series=28000
[2] https://patchwork.kernel.org/series/1086068/
Changes in v8:
- Rebase the encoder series on the MT8196 decoder v6 series.
- Adapt patch 2 to the decoder v6 firmware-selection flow, retaining its generic selector and validation while supplying the encoder platform firmware initialization callback.
- Adapt patch 5 to the decoder v6 VCP teardown flow, retaining the complete teardown before adding the encoder firmware-device callback.
- Link to v7:
https://patchwork.linuxtv.org/project/linux-media/list/?series=26089
Changes in v7:
- Patch 2: Add new pdata members to remove device-tree parsing branches.
- Rebase the series on the decoder patch set.
- Link to v6:
https://patchwork.linuxtv.org/project/linux-media/cover/[email protected]/
Changes in v6:
- Move the device-tree binding changes to patch 1.
- Rebase the series on the decoder patch set.
- Link to v5:
https://patchwork.linuxtv.org/project/linux-media/cover/[email protected]/
Changes in v5:
- Rewrite the patch 5 commit subject.
- Add the else branch in patch 5.
- Link to v4:
https://patchwork.linuxtv.org/project/linux-media/list/?series=21757
Changes in v4:
- Rework the patch 3 commit message.
- Rework patch 5 with more details.
- Rebase the series on the decoder patch set.
- Link to v3:
https://patchwork.linuxtv.org/project/linux-media/cover/[email protected]/
Changes in v3:
- Add encoder rate-control buffer allocation failure handling.
- Add the mediatek,vcp property definition to the device-tree binding.
Changes in v2:
- Add support for the VCP encode process.
- Add the MT8196 encoder platform data.
- Rebase the encoder series on the decoder patch set.
- Address review comments from v1.
Irui Wang (6):
media: dt-bindings: mediatek,vcodec-encoder: Add MT8196
media: mediatek: encoder: Add new platform data members
media: mediatek: encoder: Add a new encoder driver interface
media: mediatek: encoder: Add support for common firmware interface
media: mediatek: encoder: Add support for VCP encode process
media: mediatek: encoder: Add MT8196 encoder compatible data
.../media/mediatek,vcodec-encoder.yaml | 22 + .../mediatek/vcodec/common/mtk_vcodec_fw.c | 6 + .../mediatek/vcodec/common/mtk_vcodec_fw.h | 1 + .../vcodec/common/mtk_vcodec_fw_priv.h | 1 + .../vcodec/common/mtk_vcodec_fw_vcp.c | 6 + .../platform/mediatek/vcodec/encoder/Makefile | 1 + .../mediatek/vcodec/encoder/mtk_vcodec_enc.c | 24 +- .../vcodec/encoder/mtk_vcodec_enc_drv.c | 63 +- .../vcodec/encoder/mtk_vcodec_enc_drv.h | 15 +- .../vcodec/encoder/venc/venc_common_if.c | 684 ++++++++++++++++++ .../mediatek/vcodec/encoder/venc_drv_if.c | 3 +- .../mediatek/vcodec/encoder/venc_drv_if.h | 3 + .../mediatek/vcodec/encoder/venc_ipi_msg.h | 26 + .../mediatek/vcodec/encoder/venc_vpu_if.c | 47 +- 14 files changed, 850 insertions(+), 52 deletions(-) create mode 100644 drivers/media/platform/mediatek/vcodec/encoder/venc/venc_common_if.c
base-commit: bf115aeef8fc70bc46b05733d0d3b77bd9e8af50
Signature · 1 line
2.55.0.windows.3
PATCH v8 1/6 media: dt-bindings: mediatek,vcodec-encoder: Add MT8196
Add support for MT8196 video encoder which uses VCP (Video Co-Processor) for firmware management. Unlike previous platforms that use SCP/VPU, MT8196 requires VCP to load and execute the video encoding firmware, with the encoder communicating through VCP to perform encoding operations.
Add the "mediatek,mt8196-vcodec-enc" compatible string and introduce the "mediatek,vcp" property to reference the VCP device, which is required for MT8196 encoder operation.
--- .../media/mediatek,vcodec-encoder.yaml | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+)
Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml +22 -0
@@ -24,6 +24,7 @@ properties: - mediatek,mt8188-vcodec-enc - mediatek,mt8192-vcodec-enc - mediatek,mt8195-vcodec-enc + - mediatek,mt8196-vcodec-enc - items: - const: mediatek,mt8186-vcodec-enc - const: mediatek,mt8183-vcodec-enc
@@ -58,6 +59,13 @@ properties: description: Describes point to scp. + mediatek,vcp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Reference to the VCP (Video Co-Processor) device that loads and executes + the video encoding firmware. The encoder communicates with the firmware + through VCP to perform encoding operations. + power-domains: maxItems: 1
@@ -76,6 +84,20 @@ required: - iommus allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8196-vcodec-enc + + then: + required: + - mediatek,vcp + else: + properties: + mediatek,vcp: false + - if: properties: compatible:
Signature · 1 line
2.55.0.windows.3
PATCH v8 2/6 media: mediatek: encoder: Add new platform data members
In reply to Irui WangAdd new platform data members to support different encoder ICs:
- venc_model_num: encoder model number
- fw_type: firmware type (VPU, SCP, or VCP)
- fw_init: firmware-specific initialization callback
- ipi_id: IPI ID for encoder communication
This centralizes all static platform configuration in the platform data structure, eliminating the need for runtime device tree parsing and the per-device fw_init callback pointer. Each platform's pdata now directly specifies its firmware initialization function.
Changes:
1. Add venc_model_num to pdata and remove mtk_vcodec_enc_get_chip_name()
2. Add fw_type to pdata for each platform (VPU or SCP)
3. Add ipi_id field declaration to pdata
4. Remove device tree parsing for fw_type
--- .../mediatek/vcodec/encoder/mtk_vcodec_enc.c | 22 +--------- .../vcodec/encoder/mtk_vcodec_enc_drv.c | 41 +++++++++++-------- .../vcodec/encoder/mtk_vcodec_enc_drv.h | 10 ++++- 3 files changed, 35 insertions(+), 38 deletions(-)
drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc.c +2 -20
@@ -198,33 +198,15 @@ static int vidioc_enum_fmt_vid_out(struct file *file, void *priv, pdata->num_output_formats); } -static int mtk_vcodec_enc_get_chip_name (struct mtk_vcodec_enc_ctx *ctx) -{ -struct device *dev = &ctx->dev->plat_dev->dev; - -if (of_device_is_compatible (dev->of_node,"mediatek,mt8173-vcodec-enc" )) -return 8173 ; -else if (of_device_is_compatible (dev->of_node,"mediatek,mt8183-vcodec-enc" )) -return 8183 ; -else if (of_device_is_compatible (dev->of_node,"mediatek,mt8192-vcodec-enc" )) -return 8192 ; -else if (of_device_is_compatible (dev->of_node,"mediatek,mt8195-vcodec-enc" )) -return 8195 ; -else if (of_device_is_compatible (dev->of_node,"mediatek,mt8188-vcodec-enc" )) -return 8188 ; -else -return 8173 ; -} -static int vidioc_venc_querycap (struct file *file,void *priv,struct v4l2_capability *cap) {struct mtk_vcodec_enc_ctx *ctx =file_to_enc_ctx (file); +const struct mtk_vcodec_enc_pdata *pdata = ctx->dev->venc_pdata;struct device *dev = &ctx->dev->plat_dev->dev; -int platform_name =mtk_vcodec_enc_get_chip_name (ctx);strscpy (cap->driver, dev->driver->name,sizeof (cap->driver)); -snprintf (cap->card,sizeof (cap->card),"MT%d video encoder" , platform_name); +snprintf (cap->card,sizeof (cap->card),"MT%d video encoder" , pdata->venc_model_num);return 0 ; }
drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.c +25 -16
115 lines not on this page · raw message
drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.h +8 -2
@@ -20,6 +20,7 @@/** * struct mtk_vcodec_enc_pdata - compatible data for each IC * +* @venc_model_num: encoder model number * @uses_ext: whether the encoder uses the extended firmware messaging format * @min_bitrate: minimum supported encoding bitrate * @max_bitrate: maximum supported encoding bitrate
@@ -29,8 +30,12 @@* @num_output_formats: number of entries in output_formats * @core_id: stand for h264 or vp8 encode index * @uses_34bit: whether the encoder uses 34-bit iova +* @fw_type: firmware type (VPU, SCP, or VCP) +* @fw_init: firmware-specific initialization callback +* @ipi_id: IPI ID for encoder communication with firmware */ struct mtk_vcodec_enc_pdata { +u16 venc_model_num;bool uses_ext;u64 min_bitrate;u64 max_bitrate;
@@ -40,6 +45,9 @@ struct mtk_vcodec_enc_pdata {size_t num_output_formats;u8 core_id;bool uses_34bit; +enum mtk_vcodec_fw_type fw_type; +struct mtk_vcodec_fw *(*fw_init)(void *priv,enum mtk_vcodec_fw_use fw_use); +int ipi_id; };/*
@@ -174,7 +182,6 @@ struct mtk_vcodec_enc_ctx {* @venc_pdata: encoder IC-specific data * * @fw_handler: used to communicate with the firmware. -* @fw_init: firmware-specific init callback selected at probe time * @id_counter: used to identify current opened instance * * @enc_mutex: encoder hardware lock.
@@ -202,7 +209,6 @@ struct mtk_vcodec_enc_dev {const struct mtk_vcodec_enc_pdata *venc_pdata;struct mtk_vcodec_fw *fw_handler; -struct mtk_vcodec_fw *(*fw_init)(void *priv,enum mtk_vcodec_fw_use fw_use);u64 id_counter;/* encoder hardware mutex lock */
Signature · 1 line
2.55.0.windows.3
PATCH v8 3/6 media: mediatek: encoder: Add a new encoder driver interface
In reply to Irui WangIntroduce a new encoder kernel driver interface to ensure compatibility with the updated encoder software driver running in firmware. The new driver interface is expected to support more encoder formats, share more encode parameters between kernel and firmware.
--- .../platform/mediatek/vcodec/encoder/Makefile | 1 + .../mediatek/vcodec/encoder/mtk_vcodec_enc.c | 2 + .../vcodec/encoder/venc/venc_common_if.c | 674 ++++++++++++++++++ .../mediatek/vcodec/encoder/venc_drv_if.h | 3 + 4 files changed, 680 insertions(+) create mode 100644 drivers/media/platform/mediatek/vcodec/encoder/venc/venc_common_if.c
drivers/media/platform/mediatek/vcodec/encoder/Makefile +1 -0
@@ -4,6 +4,7 @@ obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec-enc.o mtk-vcodec-enc-y := venc/venc_vp8_if.o \ venc/venc_h264_if.o \ + venc/venc_common_if.o \ mtk_vcodec_enc.o \ mtk_vcodec_enc_drv.o \ mtk_vcodec_enc_pm.o \
drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc.c +2 -0
@@ -1139,6 +1139,8 @@ static void mtk_venc_worker(struct work_struct *work) frm_buf.fb_addr[i].size = (size_t )src_buf->vb2_buf.planes[i].length; } + frm_buf.num_planes = src_buf->vb2_buf.num_planes; + bs_buf.va =vb2_plane_vaddr (&dst_buf->vb2_buf,0 ); bs_buf.dma_addr =vb2_dma_contig_plane_dma_addr (&dst_buf->vb2_buf,0 ); bs_buf.size = (size_t )dst_buf->vb2_buf.planes[0 ].length;
drivers/media/platform/mediatek/vcodec/encoder/venc/venc_common_if.c new file +674 -0
674 lines not on this page · raw message
drivers/media/platform/mediatek/vcodec/encoder/venc_drv_if.h +3 -0
@@ -107,9 +107,11 @@ struct venc_frame_info {/* * struct venc_frm_buf - frame buffer information used in venc_if_encode() * @fb_addr: plane frame buffer addresses +* @num_planes: number of planes */ struct venc_frm_buf {struct mtk_vcodec_fb fb_addr[MTK_VCODEC_MAX_PLANES ]; +unsigned int num_planes; };/*
@@ -124,6 +126,7 @@ struct venc_done_result {extern const struct venc_common_if venc_h264_if;extern const struct venc_common_if venc_vp8_if; +extern const struct venc_common_if venc_if;/* * venc_if_init - Create the driver handle
Signature · 1 line
2.55.0.windows.3
PATCH v8 4/6 media: mediatek: encoder: Add support for common firmware interface
In reply to Irui WangThe existing encoder firmware interface implied just one type of codec:
H.264. Future encoders may support additional codecs; however adding entire sets of interfaces for them is not scalable.
Instead, a new "common" firmware interface is defined for non codec specific messages. The new messages encapsulate the old ones for backward compatibility.
This patch adds support for these new messages.
--- .../vcodec/encoder/mtk_vcodec_enc_drv.h | 3 ++ .../mediatek/vcodec/encoder/venc_drv_if.c | 3 +- .../mediatek/vcodec/encoder/venc_ipi_msg.h | 26 +++++++++++++++ .../mediatek/vcodec/encoder/venc_vpu_if.c | 33 ++++++++++++------- 4 files changed, 52 insertions(+), 13 deletions(-)
drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.h +3 -0
@@ -16,6 +16,7 @@#define MTK_ENC_CTX_IS_EXT (ctx) ((ctx)->dev->venc_pdata->uses_ext)#define MTK_ENC_IOVA_IS_34BIT (ctx) ((ctx)->dev->venc_pdata->uses_34bit) +#define MTK_ENC_DRV_IS_COMM (ctx) (((ctx)->dev->venc_pdata->uses_common_fw_iface))/** * struct mtk_vcodec_enc_pdata - compatible data for each IC
@@ -30,6 +31,7 @@* @num_output_formats: number of entries in output_formats * @core_id: stand for h264 or vp8 encode index * @uses_34bit: whether the encoder uses 34-bit iova +* @uses_common_fw_iface: whether the encoder uses common driver interface * @fw_type: firmware type (VPU, SCP, or VCP) * @fw_init: firmware-specific initialization callback * @ipi_id: IPI ID for encoder communication with firmware
@@ -45,6 +47,7 @@ struct mtk_vcodec_enc_pdata {size_t num_output_formats;u8 core_id;bool uses_34bit; +bool uses_common_fw_iface;enum mtk_vcodec_fw_type fw_type;struct mtk_vcodec_fw *(*fw_init)(void *priv,enum mtk_vcodec_fw_use fw_use);int ipi_id;
drivers/media/platform/mediatek/vcodec/encoder/venc_drv_if.c +2 -1
@@ -19,13 +19,14 @@int venc_if_init (struct mtk_vcodec_enc_ctx *ctx,unsigned int fourcc) {int ret =0 ; +const bool uses_common_fw_iface =MTK_ENC_DRV_IS_COMM (ctx);switch (fourcc) {case V4L2_PIX_FMT_VP8 : ctx->enc_if = &venc_vp8_if;break ;case V4L2_PIX_FMT_H264 : - ctx->enc_if = &venc_h264_if; + ctx->enc_if = uses_common_fw_iface ? &venc_if : &venc_h264_if;break ;default :return -EINVAL ;
drivers/media/platform/mediatek/vcodec/encoder/venc_ipi_msg.h +26 -0
@@ -45,6 +45,20 @@ struct venc_ap_ipi_msg_init {uint64_t venc_inst; }; +/** +* struct venc_ap_ipi_msg_init_comm - AP to VPU init cmd structure +* @base: AP to VPU init cmd structure +* @codec_type: encoder type +* @reserved: reserved field +* @shared_iova: shared iova +*/ +struct venc_ap_ipi_msg_init_comm { +struct venc_ap_ipi_msg_init base; +u32 codec_type; +u32 reserved; +u64 shared_iova; +}; +/** * struct venc_ap_ipi_msg_set_param - AP to VPU set_param cmd structure * @msg_id: message id (AP_IPIMSG_XXX_ENC_SET_PARAM)
@@ -175,6 +189,18 @@ struct venc_vpu_ipi_msg_init {uint32_t venc_abi_version; }; +/** +* struct venc_vpu_ipi_msg_init_comm - VPU ack AP init cmd structure +* @init_ack: AP init cmd structure +* @vpu_vsi_addr: VSI address from VPU +* @reserved: reserved field +*/ +struct venc_vpu_ipi_msg_init_comm { +struct venc_vpu_ipi_msg_init init_ack; +u32 vpu_vsi_addr; +u32 reserved; +}; +/** * struct venc_vpu_ipi_msg_set_param - VPU ack AP set_param cmd structure * @msg_id: message id (VPU_IPIMSG_XXX_ENC_SET_PARAM_DONE)
drivers/media/platform/mediatek/vcodec/encoder/venc_vpu_if.c +21 -12
@@ -10,24 +10,25 @@static void handle_enc_init_msg (struct venc_vpu_inst *vpu,const void *data) { -const struct venc_vpu_ipi_msg_init *msg = data; +const struct venc_vpu_ipi_msg_init_comm *msg = data; +struct mtk_vcodec_fw *fw = vpu->ctx->dev->fw_handler; - vpu->inst_addr = msg->vpu_inst_addr; - vpu->vsi =mtk_vcodec_fw_map_dm_addr (vpu->ctx->dev->fw_handler, - msg->vpu_inst_addr); + vpu->inst_addr = msg->init_ack.vpu_inst_addr; + vpu->vsi =mtk_vcodec_fw_map_dm_addr (fw, vpu->inst_addr);/* Firmware version field value is unspecified on MT8173. */ -if (mtk_vcodec_fw_get_type (vpu->ctx->dev->fw_handler) ==VPU ) +if (mtk_vcodec_fw_get_type (fw) ==VPU )return ;/* Check firmware version. */ -mtk_venc_debug (vpu->ctx,"firmware version: 0x%x\n" , msg->venc_abi_version); -switch (msg->venc_abi_version) { +mtk_venc_debug (vpu->ctx,"firmware version: 0x%x\n" , + msg->init_ack.venc_abi_version); +switch (msg->init_ack.venc_abi_version) {case 1 :break ;default :mtk_venc_err (vpu->ctx,"unhandled firmware version 0x%x\n" , - msg->venc_abi_version); + msg->init_ack.venc_abi_version); vpu->failure =1 ;break ; }
@@ -133,7 +134,8 @@ static int vpu_enc_send_msg(struct venc_vpu_inst *vpu, void *msg,int vpu_enc_init (struct venc_vpu_inst *vpu) {int status; -struct venc_ap_ipi_msg_init out = { }; +size_t msg_size; +struct venc_ap_ipi_msg_init_comm out = { };init_waitqueue_head (&vpu->wq_hd); vpu->signaled =0 ;
@@ -149,9 +151,16 @@ int vpu_enc_init(struct venc_vpu_inst *vpu)return -EINVAL ; } - out.msg_id =AP_IPIMSG_ENC_INIT ; - out.venc_inst = (unsigned long )vpu; -if (vpu_enc_send_msg (vpu, &out,sizeof (out))) { + out.base.msg_id =AP_IPIMSG_ENC_INIT ; + out.base.venc_inst = (unsigned long )vpu; +if (MTK_ENC_DRV_IS_COMM (vpu->ctx)) { + out.codec_type = vpu->ctx->q_data[MTK_Q_DATA_DST ].fmt->fourcc; + msg_size =sizeof (struct venc_ap_ipi_msg_init_comm ); + }else { + msg_size =sizeof (struct venc_ap_ipi_msg_init ); + } + +if (vpu_enc_send_msg (vpu, &out, msg_size)) {mtk_venc_err (vpu->ctx,"AP_IPIMSG_ENC_INIT fail" );return -EINVAL ; }
Signature · 1 line
2.55.0.windows.3
PATCH v8 5/6 media: mediatek: encoder: Add support for VCP encode process
In reply to Irui WangAdapt the encoder driver to support VCP firmware interface.
Use platform data fw_type to identify VCP firmware and perform VCP-specific operations:
- Allocate RC buffers using the VCP device
- Send shared memory address to VCP firmware
- Map the encoder VSI address to the CPU address space using the VCP shared memory address.
--- .../mediatek/vcodec/common/mtk_vcodec_fw.c | 6 +++++ .../mediatek/vcodec/common/mtk_vcodec_fw.h | 1 + .../vcodec/common/mtk_vcodec_fw_priv.h | 1 + .../vcodec/common/mtk_vcodec_fw_vcp.c | 6 +++++ .../vcodec/encoder/venc/venc_common_if.c | 22 ++++++++++++++----- .../mediatek/vcodec/encoder/venc_vpu_if.c | 16 ++++++++++++-- 6 files changed, 44 insertions(+), 8 deletions(-)
drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw.c +6 -0
@@ -83,3 +83,9 @@ int mtk_vcodec_fw_get_type(struct mtk_vcodec_fw *fw)return fw->type; }EXPORT_SYMBOL_GPL (mtk_vcodec_fw_get_type); + +struct device *mtk_vcodec_fw_get_dev (struct mtk_vcodec_fw *fw) +{ +return fw->ops->get_fw_dev (fw); +} +EXPORT_SYMBOL_GPL (mtk_vcodec_fw_get_dev);
drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw.h +1 -0
@@ -44,5 +44,6 @@ int mtk_vcodec_fw_ipi_send(struct mtk_vcodec_fw *fw, int id, void *buf, unsigned int len, unsigned int wait);int mtk_vcodec_fw_get_type (struct mtk_vcodec_fw *fw);int mtk_vcodec_fw_get_ipi (enum mtk_vcodec_fw_type type,int hw_id); +struct device *mtk_vcodec_fw_get_dev (struct mtk_vcodec_fw *fw);#endif /* _MTK_VCODEC_FW_H_ */
drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_priv.h +1 -0
@@ -29,6 +29,7 @@ struct mtk_vcodec_fw_ops {int (*ipi_send)(struct mtk_vcodec_fw *fw,int id,void *buf,unsigned int len,unsigned int wait);void (*release)(struct mtk_vcodec_fw *fw); +struct device *(*get_fw_dev)(struct mtk_vcodec_fw *fw); };#if IS_ENABLED (CONFIG_VIDEO_MEDIATEK_VCODEC_VPU )
drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vcp.c +6 -0
@@ -569,6 +569,11 @@ static void mtk_vcodec_vcp_release(struct mtk_vcodec_fw *fw)mtk_vcodec_vcp_put_device (fw); } +static struct device *mtk_vcodec_vcp_get_fw_dev (struct mtk_vcodec_fw *fw) +{ +return fw->vcp->vcp_device->dev; +} +static const struct mtk_vcodec_fw_ops mtk_vcodec_vcp_msg = { .load_firmware = mtk_vcodec_vcp_load_firmware, .get_vdec_capa = mtk_vcodec_vcp_get_vdec_capa,
@@ -577,6 +582,7 @@ static const struct mtk_vcodec_fw_ops mtk_vcodec_vcp_msg = { .ipi_register = mtk_vcodec_vcp_set_ipi_register, .ipi_send = mtk_vcodec_vcp_ipi_send, .release = mtk_vcodec_vcp_release, + .get_fw_dev = mtk_vcodec_vcp_get_fw_dev, };struct mtk_vcodec_fw *mtk_vcodec_fw_vcp_init (void *priv,enum mtk_vcodec_fw_use fw_use)
drivers/media/platform/mediatek/vcodec/encoder/venc/venc_common_if.c +16 -6
@@ -481,7 +481,11 @@ static void venc_free_rc_buf(struct venc_inst *inst,int i;struct device *dev; - dev = &inst->ctx->dev->plat_dev->dev; +if (inst->ctx->dev->venc_pdata->fw_type ==VCP ) + dev =mtk_vcodec_fw_get_dev (inst->ctx->dev->fw_handler); +else + dev = &inst->ctx->dev->plat_dev->dev; +mtk_venc_mem_free (inst, dev, &bufs->rc_code);for (i =0 ; i < core_num; i++)
@@ -530,12 +534,18 @@ static int venc_alloc_rc_buf(struct venc_inst *inst,struct device *dev;void *tmp_va; - dev = &inst->ctx->dev->plat_dev->dev; -if (mtk_venc_mem_alloc (inst, dev, &bufs->rc_code)) -return -ENOMEM ; +if (inst->ctx->dev->venc_pdata->fw_type ==VCP ) { + dev =mtk_vcodec_fw_get_dev (fw); +if (mtk_venc_mem_alloc (inst, dev, &bufs->rc_code)) +return -ENOMEM ; + }else { + dev = &inst->ctx->dev->plat_dev->dev; +if (mtk_venc_mem_alloc (inst, dev, &bufs->rc_code)) +return -ENOMEM ; - tmp_va =mtk_vcodec_fw_map_dm_addr (fw, bufs->rc_code.pa); -memcpy (bufs->rc_code.va, tmp_va, bufs->rc_code.size); + tmp_va =mtk_vcodec_fw_map_dm_addr (fw, bufs->rc_code.pa); +memcpy (bufs->rc_code.va, tmp_va, bufs->rc_code.size); + }for (i =0 ; i < core_num; i++) {if (mtk_venc_mem_alloc (inst, dev, &bufs->rc_info[i]))
drivers/media/platform/mediatek/vcodec/encoder/venc_vpu_if.c +14 -2
@@ -8,16 +8,26 @@#include "venc_ipi_msg.h" #include "venc_vpu_if.h" +#define VSI_OFFSET_MASK 0x0FFFFFFF +static void handle_enc_init_msg (struct venc_vpu_inst *vpu,const void *data) {const struct venc_vpu_ipi_msg_init_comm *msg = data;struct mtk_vcodec_fw *fw = vpu->ctx->dev->fw_handler; +u64 pa_start, vsi_offset; vpu->inst_addr = msg->init_ack.vpu_inst_addr; - vpu->vsi =mtk_vcodec_fw_map_dm_addr (fw, vpu->inst_addr); + +if (vpu->ctx->dev->venc_pdata->fw_type ==VCP ) { + pa_start = (u64 )fw->vcp->iova_addr; + vsi_offset = (msg->vpu_vsi_addr &VSI_OFFSET_MASK ) - (pa_start &VSI_OFFSET_MASK ); + vpu->vsi =mtk_vcodec_fw_map_dm_addr (fw,ENCODER_MEM ) + vsi_offset; + }else { + vpu->vsi =mtk_vcodec_fw_map_dm_addr (fw, msg->vpu_vsi_addr); + }/* Firmware version field value is unspecified on MT8173. */ -if (mtk_vcodec_fw_get_type (fw) ==VPU ) +if (vpu->ctx->dev->venc_pdata->fw_type ==VPU )return ;/* Check firmware version. */
@@ -155,6 +165,8 @@ int vpu_enc_init(struct venc_vpu_inst *vpu) out.base.venc_inst = (unsigned long )vpu;if (MTK_ENC_DRV_IS_COMM (vpu->ctx)) { out.codec_type = vpu->ctx->q_data[MTK_Q_DATA_DST ].fmt->fourcc; +if (vpu->ctx->dev->venc_pdata->fw_type ==VCP ) + out.shared_iova = vpu->ctx->dev->fw_handler->vcp->iova_addr; msg_size =sizeof (struct venc_ap_ipi_msg_init_comm ); }else { msg_size =sizeof (struct venc_ap_ipi_msg_init );
Signature · 1 line
2.55.0.windows.3
PATCH v8 6/6 media: mediatek: encoder: Add MT8196 encoder compatible data
In reply to Irui WangMT8196 encoder use common firmware interface, add compatible data to support MT8196 encoding, and need set dma mask to support 34bit.
--- .../vcodec/encoder/mtk_vcodec_enc_drv.c | 22 +++++++++++++++++++ .../vcodec/encoder/mtk_vcodec_enc_drv.h | 2 ++ 2 files changed, 24 insertions(+)
drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.c +22 -0
@@ -20,6 +20,8 @@#include "mtk_vcodec_enc_pm.h" #include "../common/mtk_vcodec_intr.h" +#define VENC_DMA_BIT_MASK 34 +static const struct mtk_video_fmt mtk_video_formats_output[] = { { .fourcc =V4L2_PIX_FMT_NV12M ,
@@ -299,6 +301,9 @@ static int mtk_vcodec_probe(struct platform_device *pdev) goto err_res; } +if (dev->venc_pdata->set_dma_bit_mask) +dma_set_mask_and_coherent (&pdev->dev,DMA_BIT_MASK (VENC_DMA_BIT_MASK )); +mutex_init (&dev->enc_mutex);mutex_init (&dev->dev_mutex);spin_lock_init (&dev->dev_ctx_lock);
@@ -462,6 +467,22 @@ static const struct mtk_vcodec_enc_pdata mt8195_pdata = { .fw_init = mtk_vcodec_fw_scp_init, }; +static const struct mtk_vcodec_enc_pdata mt8196_pdata = { + .venc_model_num =8196 , + .capture_formats = mtk_video_formats_capture_h264, + .num_capture_formats =ARRAY_SIZE (mtk_video_formats_capture_h264), + .output_formats = mtk_video_formats_output, + .num_output_formats =ARRAY_SIZE (mtk_video_formats_output), + .min_bitrate =64 , + .max_bitrate =100000000 , + .core_id =VENC_SYS , + .uses_common_fw_iface = true, + .set_dma_bit_mask = true, + .fw_type =VCP , + .fw_init = mtk_vcodec_fw_vcp_init, + .ipi_id =VCP_IPI_ENCODER , +}; +static const struct of_device_id mtk_vcodec_enc_match[] = { {.compatible ="mediatek,mt8173-vcodec-enc" , .data = &mt8173_avc_pdata},
@@ -471,6 +492,7 @@ static const struct of_device_id mtk_vcodec_enc_match[] = { {.compatible = "mediatek,mt8188-vcodec-enc", .data = &mt8188_pdata}, {.compatible = "mediatek,mt8192-vcodec-enc", .data = &mt8192_pdata}, {.compatible = "mediatek,mt8195-vcodec-enc", .data = &mt8195_pdata}, + {.compatible = "mediatek,mt8196-vcodec-enc", .data = &mt8196_pdata}, {}, };MODULE_DEVICE_TABLE (of, mtk_vcodec_enc_match);
drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.h +2 -0
@@ -32,6 +32,7 @@* @core_id: stand for h264 or vp8 encode index * @uses_34bit: whether the encoder uses 34-bit iova * @uses_common_fw_iface: whether the encoder uses common driver interface +* @set_dma_bit_mask: whether the encoder need set extra DMA bit mask * @fw_type: firmware type (VPU, SCP, or VCP) * @fw_init: firmware-specific initialization callback * @ipi_id: IPI ID for encoder communication with firmware
@@ -48,6 +49,7 @@ struct mtk_vcodec_enc_pdata {u8 core_id;bool uses_34bit;bool uses_common_fw_iface; +bool set_dma_bit_mask;enum mtk_vcodec_fw_type fw_type;struct mtk_vcodec_fw *(*fw_init)(void *priv,enum mtk_vcodec_fw_use fw_use);int ipi_id;
Signature · 1 line
2.55.0.windows.3