USB: phy: remove unused phy-mv-usb.h header
PATCH 1/1 USB: phy: remove unused phy-mv-usb.h header
The mv-usb PHY driver was removed in commit 1d73df245b19 ("usb: Remove orphaned UDC drivers"), but its header was left behind. Remove it.
Signed-off-by Ethan Nelson-Moore <[email protected]>
--- drivers/usb/phy/phy-mv-usb.h | 160 ----------------------------------- 1 file changed, 160 deletions(-) delete mode 100644 drivers/usb/phy/phy-mv-usb.h
drivers/usb/phy/phy-mv-usb.h deleted +0 -160
@@ -1,160 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* Copyright (C) 2011 Marvell International Ltd. All rights reserved. -*/ - -#ifndef __MV_USB_OTG_CONTROLLER__ -#define __MV_USB_OTG_CONTROLLER__ - -#include <linux/types.h> - -/* Command Register Bit Masks */ -#define USBCMD_RUN_STOP (0x00000001) -#define USBCMD_CTRL_RESET (0x00000002) - -/* otgsc Register Bit Masks */ -#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001 -#define OTGSC_CTRL_VUSB_CHARGE 0x00000002 -#define OTGSC_CTRL_OTG_TERM 0x00000008 -#define OTGSC_CTRL_DATA_PULSING 0x00000010 -#define OTGSC_STS_USB_ID 0x00000100 -#define OTGSC_STS_A_VBUS_VALID 0x00000200 -#define OTGSC_STS_A_SESSION_VALID 0x00000400 -#define OTGSC_STS_B_SESSION_VALID 0x00000800 -#define OTGSC_STS_B_SESSION_END 0x00001000 -#define OTGSC_STS_1MS_TOGGLE 0x00002000 -#define OTGSC_STS_DATA_PULSING 0x00004000 -#define OTGSC_INTSTS_USB_ID 0x00010000 -#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000 -#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000 -#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000 -#define OTGSC_INTSTS_B_SESSION_END 0x00100000 -#define OTGSC_INTSTS_1MS 0x00200000 -#define OTGSC_INTSTS_DATA_PULSING 0x00400000 -#define OTGSC_INTR_USB_ID 0x01000000 -#define OTGSC_INTR_A_VBUS_VALID 0x02000000 -#define OTGSC_INTR_A_SESSION_VALID 0x04000000 -#define OTGSC_INTR_B_SESSION_VALID 0x08000000 -#define OTGSC_INTR_B_SESSION_END 0x10000000 -#define OTGSC_INTR_1MS_TIMER 0x20000000 -#define OTGSC_INTR_DATA_PULSING 0x40000000 - -#define CAPLENGTH_MASK (0xff) - -/* Timer's interval, unit 10ms */ -#define T_A_WAIT_VRISE 100 -#define T_A_WAIT_BCON 2000 -#define T_A_AIDL_BDIS 100 -#define T_A_BIDL_ADIS 20 -#define T_B_ASE0_BRST 400 -#define T_B_SE0_SRP 300 -#define T_B_SRP_FAIL 2000 -#define T_B_DATA_PLS 10 -#define T_B_SRP_INIT 100 -#define T_A_SRP_RSPNS 10 -#define T_A_DRV_RSM 5 - -enum otg_function { -OTG_B_DEVICE =0 , -OTG_A_DEVICE -}; - -enum mv_otg_timer { -A_WAIT_BCON_TIMER =0 , -OTG_TIMER_NUM -}; - -/* PXA OTG state machine */ -struct mv_otg_ctrl { -/* internal variables */ -u8 a_set_b_hnp_en;/* A-Device set b_hnp_en */ -u8 b_srp_done; -u8 b_hnp_en; - -/* OTG inputs */ -u8 a_bus_drop; -u8 a_bus_req; -u8 a_clr_err; -u8 a_bus_resume; -u8 a_bus_suspend; -u8 a_conn; -u8 a_sess_vld; -u8 a_srp_det; -u8 a_vbus_vld; -u8 b_bus_req;/* B-Device Require Bus */ -u8 b_bus_resume; -u8 b_bus_suspend; -u8 b_conn; -u8 b_se0_srp; -u8 b_sess_end; -u8 b_sess_vld; -u8 id; -u8 a_suspend_req; - -/*Timer event */ -u8 a_aidl_bdis_timeout; -u8 b_ase0_brst_timeout; -u8 a_bidl_adis_timeout; -u8 a_wait_bcon_timeout; - -struct timer_list timer[OTG_TIMER_NUM ]; -}; - -#define VUSBHS_MAX_PORTS 8 - -struct mv_otg_regs { -u32 usbcmd;/* Command register */ -u32 usbsts;/* Status register */ -u32 usbintr;/* Interrupt enable */ -u32 frindex;/* Frame index */ -u32 reserved1[1 ]; -u32 deviceaddr;/* Device Address */ -u32 eplistaddr;/* Endpoint List Address */ -u32 ttctrl;/* HOST TT status and control */ -u32 burstsize;/* Programmable Burst Size */ -u32 txfilltuning;/* Host Transmit Pre-Buffer Packet Tuning */ -u32 reserved[4 ]; -u32 epnak;/* Endpoint NAK */ -u32 epnaken;/* Endpoint NAK Enable */ -u32 configflag;/* Configured Flag register */ -u32 portsc[VUSBHS_MAX_PORTS ];/* Port Status/Control x, x = 1..8 */ -u32 otgsc; -u32 usbmode;/* USB Host/Device mode */ -u32 epsetupstat;/* Endpoint Setup Status */ -u32 epprime;/* Endpoint Initialize */ -u32 epflush;/* Endpoint De-initialize */ -u32 epstatus;/* Endpoint Status */ -u32 epcomplete;/* Endpoint Interrupt On Complete */ -u32 epctrlx[16 ];/* Endpoint Control, where x = 0.. 15 */ -u32 mcr;/* Mux Control */ -u32 isr;/* Interrupt Status */ -u32 ier;/* Interrupt Enable */ -}; - -struct mv_otg { -struct usb_phy phy; -struct mv_otg_ctrl otg_ctrl; - -/* base address */ -void __iomem *phy_regs; -void __iomem *cap_regs; -struct mv_otg_regs __iomem *op_regs; - -struct platform_device *pdev; -int irq; -u32 irq_status; -u32 irq_en; - -struct delayed_work work; -struct workqueue_struct *qwork; - -spinlock_t wq_lock; - -struct mv_usb_platform_data *pdata; - -unsigned int active; -unsigned int clock_gating; -struct clk *clk; -}; - -#endif
Signature · 1 line
2.43.0
Reviewed-by Ivy Lopez <[email protected]>