Add support for Acer Swift SFA14-11
v2 cover Add support for Acer Swift SFA14-11
Add support for Acer Swift SFA14-11, a laptop based on the Qualcomm X1E78100 SoC.
The following hardware has been tested and is working:
- NVMe SSD
- WiFi and Bluetooth (UART)
- USB-A ports
- USB-C port with DP alt mode
- eDP display with PWM backlight
- HDMI (via DP bridge)
- I2C HID keyboard and touchpad
- Audio: speakers, headphone jack, DP alt mode and HDMI
- GPU and video decoding
- Battery charging
Note on the compatible string: There are two names:
- Swift SFA14-11[1]
- SFA14-11[2]
from the support site of acer.com, but the UEFI firmware reports the Product Name as SFA14-11. The compatible string follows the firmware ("acer,sfa14-11"), while the model string uses "Acer Swift SFA14-11" for readability.
[1] https://www.acer.com/au-en/support/product-support/Swift_SFA14-11
[2] https://www.acer.com/au-en/support/product-support/SFA14-11
Changes in v2:
- Add power-supply for the backlight (vreg_edp_bl), matching the T14s LCD variant
- Fix swapped vdda-phy/vdda-pll supplies on the QMP PHYs, matching the reference design (cf. commit 7c1d0ef2969e1 fixing the same issue on Purwa boards)
Jianfeng Liu (3):
dt-bindings: arm: qcom: Add Acer Swift SFA14-11
arm64: dts: qcom: Add Acer Swift SFA14-11
firmware: qcom: scm: Allow QSEECOM on Acer Swift SFA14-11
.../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 2 + .../boot/dts/qcom/x1e78100-acer-sfa14-11.dts | 1521 +++++++++++++++++ drivers/firmware/qcom/qcom_scm.c | 1 + 4 files changed, 1525 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/x1e78100-acer-sfa14-11.dts
---
base-commit: 5c4d4169604b335c38bbc79bc1fc03042981fc6f
branch: sfa14-11-next-20260921
Signature · 1 line
2.47.3
PATCH v2 1/3 dt-bindings: arm: qcom: Add Acer Swift SFA14-11
Document the X1E78100-based Acer Swift SFA14-11.
---
(no changes since v1)
Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/qcom.yaml +1 -0
@@ -1203,6 +1203,7 @@ properties: - items: - enum: + - acer,sfa14-11 - medion,sprchrgd14s1 - tuxedo,elite14gen1 - const: qcom,x1e78100
Signature · 1 line
2.47.3
PATCH v2 2/3 arm64: dts: qcom: Add Acer Swift SFA14-11
In reply to Jianfeng LiuAdd support for Acer Swift SFA14-11, a laptop based on the Qualcomm X1E78100 SoC.
The following hardware has been tested and is working:
- NVMe SSD
- WiFi and Bluetooth (UART)
- USB-A ports
- USB-C port with DP alt mode
- eDP display with PWM backlight
- HDMI (via DP bridge)
- I2C HID keyboard and touchpad
- Audio: speakers, headphone jack, DP alt mode and HDMI
- GPU and video decoding
- Battery charging
---
(no changes since v1)
arch/arm64/boot/dts/qcom/Makefile | 2 + .../boot/dts/qcom/x1e78100-acer-sfa14-11.dts | 1521 +++++++++++++++++ 2 files changed, 1523 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/x1e78100-acer-sfa14-11.dts
arch/arm64/boot/dts/qcom/Makefile +2 -0
@@ -450,6 +450,8 @@ talos-evk-rpi-display-2-5in-dtbs := \ dtb-$(CONFIG_ARCH_QCOM) += talos-evk-rpi-display-2-5in.dtb x1e001de-devkit-el2-dtbs := x1e001de-devkit.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e001de-devkit.dtb x1e001de-devkit-el2.dtb +x1e78100-acer-sfa14-11-el2-dtbs := x1e78100-acer-sfa14-11.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1e78100-acer-sfa14-11.dtb x1e78100-acer-sfa14-11-el2.dtb x1e78100-lenovo-thinkpad-t14s-el2-dtbs := x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb x1e78100-lenovo-thinkpad-t14s-el2.dtb x1e78100-lenovo-thinkpad-t14s-oled-el2-dtbs := x1e78100-lenovo-thinkpad-t14s-oled.dtb x1-el2.dtbo
arch/arm64/boot/dts/qcom/x1e78100-acer-sfa14-11.dts new file +1521 -0
1,521 lines not on this page · raw message
Signature · 1 line
2.47.3
PATCH v2 3/3 firmware: qcom: scm: Allow QSEECOM on Acer Swift SFA14-11
In reply to Jianfeng LiuThe Hamoa-based Acer Swift SFA14-11 provides the same UEFI variable access through uefisecapp as other Hamoa devices, add it to the allowlist.
---
Changes in v2:
- Add power-supply for the backlight (vreg_edp_bl), matching the T14s LCD variant
- Fix swapped vdda-phy/vdda-pll supplies on the QMP PHYs, matching the reference design (cf. commit 7c1d0ef2969e1 fixing the same issue on Purwa boards)
drivers/firmware/qcom/qcom_scm.c | 1 + 1 file changed, 1 insertion(+)
drivers/firmware/qcom/qcom_scm.c +1 -0
@@ -2215,6 +2215,7 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_send);+ any potential issues with this, only allow validated machines for now. */ static const struct of_device_id qcom_scm_qseecom_allowlist[]__maybe_unused = { + { .compatible ="acer,sfa14-11" }, { .compatible ="asus,vivobook-s15" }, { .compatible ="asus,vivobook-s15-x1p4" }, { .compatible ="asus,zenbook-a14-ux3407na" },
Signature · 1 line
2.47.3