Skip to contentSkip to conversation

perf tools: Add progress diagnostics and a false-sharing workload

PATCH Superseded Arnaldo Carvalho de Melo 2 participants 19 messages Oct 2 perf events

v8 of 12 Superseded Latest is v12 →

lore
Share & tools
lore

Arnaldo Carvalho de Melo

author maintainer
#0 lore raw

v8 cover perf tools: Add progress diagnostics and a false-sharing workload

Hi,

This series adds progress and stuck-process diagnostics to perf, and a workload that makes false sharing visible to data type profiling.

The changes are:

- move perf_config__set_variable() to util/config.c and serialize config parser and read-modify-write state, so non-builtin perf code can persist configuration changes safely;

- add 'perf report --progress' for stdio users, showing the current phase,

    percentage, and counts while a session is processed;

- wire up 'perf report --no-progress', the counterpart of the option above, for the TUI and GTK browsers, whose progress there is no other way to turn off;

- add the prototype tools/perf/scripts/perf-stuck.sh helper, which samples a running perf process and can invoke the accompanying GDB commands when progress stops;

- add 'perf test -w false_sharing', a synthetic TCP-shaped workload with identity and packet counters sharing a cacheline, and include it in the data type profiling shell test.

Best regards,

- Arnaldo

What changed from v7:

- tools/perf/util/mutex.h: the DO_ONCE() lockless fast path pairs its

    __ATOMIC_ACQUIRE load with the __ATOMIC_RELEASE store.  sashiko, v7;

What changed from v6:

- patch 1/5 split into four: the move, perf_etc_perfconfig() never returning NULL, the DEFINE_MUTEX() prep and the serialization. Namhyung Kim asked, v6;

- tools/perf/util/{config.c,mutex.h}: perf's own mutex type, adding

    the DEFINE_MUTEX() initializer it lacked.  Namhyung Kim, v6;

- tools/perf/util/mutex.h: add DO_ONCE() one-time init, from the

    kernel's once.h, moving the lazy inits in config.c to it;

- tools/perf/builtin-report.c: drop the option negation and stdio

    hook comments Namhyung Kim asked to drop, reviewing v6;

- tools/perf/scripts/perf-stuck.gdb: break the long printf() line.

    Namhyung Kim, reviewing v6;

- the false_sharing cset now carries the data type profiling output with cacheline info. Namhyung Kim asked for it, reviewing v6.

What changed from v5:

- tools/perf/util/config.c: drop the config_file_name read in

    bad_config(), locking would buy a consistent NULL.  Sashiko, v5;

- tools/perf/util/config.c: new config_set_mutex around the shared

    set's init/teardown, home init via pthread_once.  Sashiko, v5;

- tools/perf/builtin-report.c, perf-report.txt: --no-progress is --progress's auto negation, last wins. Namhyung Kim, reviewing v5.

What changed from v4:

- tools/perf/builtin-report.c: mark --progress PARSE_OPT_NOAUTONEG,

    parse_long_opt() claimed --no-progress first.  Sashiko, v4;

- tools/perf/util/config.c: format the path buffer inside the critical

    section.  Sashiko pointed out the window, reviewing v4;

- tools/perf/tests/workloads/false_sharing.c: walk every bit of the affinity mask, not _SC_NPROCESSORS_CONF. Sashiko, reviewing v4.

What changed from v3:

- tools/perf/util/config.c: keep the buffer handed to the parser in

    static storage.  Sashiko, reviewing v3;

- tools/perf/scripts/perf-stuck.gdb: perf-dso walks each dso candidate

    until one evaluates, for REFCNT_CHECKING builds.  Sashiko, v3;

- tools/perf/tests/workloads/false_sharing.c: sum before cpu in struct

    fs_reader, the padding after cpu rounded it to 128.  Sashiko, v3;

- tools/perf/builtin-report.c: --quiet wins over --progress, the phases

    stay uncounted, documented next to it.  Namhyung Kim, v3;

- tools/perf/builtin-report.c, tools/perf/ui/progress.c: --no-progress

    installs the no-op ops.  Suggested by Namhyung Kim, reviewing v3;

- tools/perf/scripts/perf-stuck.sh: check gdb is there before watching. Namhyung Kim, reviewing v3.

What changed from v2:

- tools/perf/util/config.c: make perf_etc_perfconfig() total, falling

    back to the unresolved path.  Sashiko, reviewing v2;

- tools/perf/scripts/perf-stuck.gdb: don't deref map_symbol.sym without

    a NULL check.  Sashiko, reviewing v2;

- tools/perf/scripts/perf-stuck.gdb: note the REFCNT_CHECKING proxy

    next to the structure walks;

- tools/perf/scripts/perf-stuck.sh: count samples with no progress to

    look at, an empty log never fired -g;

- tools/perf/scripts/perf-stuck.sh: -- for pgrep and tail against

    names starting with a hyphen;

- tools/perf/scripts/perf-stuck.sh: bound the gdb run with

    `timeout --signal=INT 30`.

What changed from v1:

- avoid calling CPU_SET() with -1 when false_sharing runs with only one CPU available in its affinity mask.

 tools/perf/Documentation/perf-report.txt      |  19 ++
 tools/perf/builtin-config.c                   |  70 +----
 tools/perf/builtin-report.c                   |   9 +
 tools/perf/scripts/perf-stuck.gdb             | 131 +++++++++
 tools/perf/scripts/perf-stuck.sh              | 193 ++++++++++++++
 tools/perf/tests/builtin-test.c               |   1 +
 tools/perf/tests/shell/data_type_profiling.sh |   9 +-
 tools/perf/tests/tests.h                      |   1 +
 tools/perf/tests/workloads/Build              |   2 +
 tools/perf/tests/workloads/false_sharing.c    | 251 ++++++++++++++++++
 tools/perf/ui/Build                           |   1 +
 tools/perf/ui/progress.c                      |   6 +
 tools/perf/ui/progress.h                      |   4 +
 tools/perf/ui/stdio/progress.c                | 162 +++++++++++
 tools/perf/util/config.c                      | 166 ++++++++++--
 tools/perf/util/config.h                      |   2 +
 tools/perf/util/mutex.h                       |  27 ++
 tools/perf/util/ordered-events.c              |  16 +-
 tools/perf/util/session.c                     |  12 +-
 19 files changed, 982 insertions(+), 100 deletions(-)
 create mode 100644 tools/perf/scripts/perf-stuck.gdb
 create mode 100755 tools/perf/scripts/perf-stuck.sh
 create mode 100644 tools/perf/tests/workloads/false_sharing.c
 create mode 100644 tools/perf/ui/stdio/progress.c

base-commit: 0ae6fc78c5ce0dfd
v1-head: 45d7917f7e05e8a29828ed5f0bbdc94fc938f79f
v2-head: d4f84e4de8890194924ccd897a8e6773e7d4240b
v3-head: 485532296710225862daf8ffb19802ae327efe2a
v4-head: 38193635508e0a5f04a6ebf70db27534b68b2d5b
v5-head: e99bc48f6c72b9cc67b4e4143a0364acac5523bb
v6-head: 7dc99dbb6504f199c3c39487d91370d1bbb7a827
v7-head: b357a76666d08f74eb99c755cca41855a96f6169
--

author maintainer
#1 lore raw

PATCH v8 1/9 perf config: Move perf_config__set_variable() to util/config.c

From: Arnaldo Carvalho de Melo <[email protected]>

Move perf_config__set_variable() out of the 'perf config' builtin so that opt-in features can persist their choice from outside it, e.g. util/debuginfo.c writing core.debuginfod=false when the user disables debuginfod for the rest of the session. The set_config() body becomes perf_config_set__write(), with the system_config choice as an argument, as the builtin's use_system_config/use_user_config statics are not available outside it.

perf_config_set__write() checked fopen() but none of the fprintf()s or fclose(), so a write failure after truncating the file was reported as success. Harmless for the interactive 'perf config' this came from, but this makes it an entry point a background feature can call with no other feedback, so propagate those errors too.

---
 tools/perf/builtin-config.c | 70 +---------------------------------
 tools/perf/util/config.c    | 76 +++++++++++++++++++++++++++++++++++++
 tools/perf/util/config.h    |  2 +
 3 files changed, 79 insertions(+), 69 deletions(-)
tools/perf/builtin-config.c +1 -69
index cefd042e4f853466..3b074aca8d344539 100644
@@ -41,37 +41,7 @@ static struct option config_options[] = {
 
 static int set_config(struct perf_config_set *set, const char *file_name)
 {
-	struct perf_config_section *section = NULL;
-	struct perf_config_item *item = NULL;
-	const char *first_line = "# this file is auto-generated.";
-	FILE *fp;
-
-	if (set == NULL)
-		return -1;
-
-	fp = fopen(file_name, "w");
-	if (!fp)
-		return -1;
-
-	fprintf(fp, "%s\n", first_line);
-
-	/* overwrite configvariables */
-	perf_config_items__for_each_entry(&set->sections, section) {
-		if (!use_system_config && section->from_system_config)
-			continue;
-		fprintf(fp, "[%s]\n", section->name);
-
-		perf_config_items__for_each_entry(&section->items, item) {
-			if (!use_system_config && item->from_system_config)
-				continue;
-			if (item->value)
-				fprintf(fp, "\t%s = %s\n",
-					item->name, item->value);
-		}
-	}
-	fclose(fp);
-
-	return 0;
+	return perf_config_set__write(set, file_name, use_system_config);
 }
 
 static int show_spec_config(struct perf_config_set *set, const char *var)
@@ -158,44 +128,6 @@ static int parse_config_arg(char *arg, char **var, char **value)
 	return 0;
 }
 
-int perf_config__set_variable(const char *var, const char *value)
-{
-	char path[PATH_MAX];
-	char *user_config = mkpath(path, sizeof(path), "%s/.perfconfig", getenv("HOME"));
-	const char *config_filename;
-	struct perf_config_set *set;
-	int ret = -1;
-
-	if (use_system_config)
-		config_exclusive_filename = perf_etc_perfconfig();
-	else if (use_user_config)
-		config_exclusive_filename = user_config;
-
-	if (!config_exclusive_filename)
-		config_filename = user_config;
-	else
-		config_filename = config_exclusive_filename;
-
-	set = perf_config_set__new();
-	if (!set)
-		goto out_err;
-
-	if (perf_config_set__collect(set, config_filename, var, value) < 0) {
-		pr_err("Failed to add '%s=%s'\n", var, value);
-		goto out_err;
-	}
-
-	if (set_config(set, config_filename) < 0) {
-		pr_err("Failed to set the configs on %s\n", config_filename);
-		goto out_err;
-	}
-
-	ret = 0;
-out_err:
-	perf_config_set__delete(set);
-	return ret;
-}
-
 int cmd_config(int argc, const char **argv)
 {
 	int i, ret = -1;
tools/perf/util/config.c +76 -0

88 lines not on this page · raw message

tools/perf/util/config.h +2 -0
index 987b47cf54c350ba..9098f8a045850c97 100644
@@ -33,6 +33,8 @@ int perf_config_scan(const char *name, const char *fmt, ...) __scanf(2, 3);
 const char *perf_config_get(const char *name);
 int perf_config_set(struct perf_config_set *set,
 		    config_fn_t fn, void *data);
+int perf_config_set__write(struct perf_config_set *set,
+			   const char *file_name, bool system_config);
 int perf_config_int(int *dest, const char *, const char *);
 int perf_config_u8(u8 *dest, const char *name, const char *value);
 int perf_config_u64(u64 *dest, const char *, const char *);
Signature · 1 line
2.55.0
#2 lore raw

Re: [PATCH v8 1/9] perf config: Move perf_config__set_variable() to util/config.c

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 10 lines

From: Arnaldo Carvalho de Melo <[email protected]>

Move perf_config__set_variable() out of the 'perf config' builtin so that opt-in features can persist their choice from outside it, e.g. util/debuginfo.c writing core.debuginfod=false when the user disables debuginfod for the rest of the session. The set_config() body becomes perf_config_set__write(), with the system_config choice as an argument, as the builtin's use_system_config/use_user_config statics are not available outside it.

Quoted 8 lines

perf_config_set__write() checked fopen() but none of the fprintf()s or fclose(), so a write failure after truncating the file was reported as success. Harmless for the interactive 'perf config' this came from, but this makes it an entry point a background feature can call with no other feedback, so propagate those errors too.

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
author maintainer
#3 lore raw

PATCH v8 2/9 perf config: Make perf_etc_perfconfig() never return NULL

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

perf_etc_perfconfig() returns what system_path() gives, and that allocates, so on failure every caller dereferenced NULL, the pre-existing ones in perf_config_set__init() and in the daemon included. For the usual absolute ETC_PERFCONFIG system_path() just returns a strdup of it, so use ETC_PERFCONFIG itself when that fails.

---
 tools/perf/util/config.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
tools/perf/util/config.c +7 -1
index 85e50d0a25580da0..6e0ff8a9140ccf96 100644
@@ -571,8 +571,14 @@ static int perf_config_from_file(config_fn_t fn, const char *filename, void *dat
 const char *perf_etc_perfconfig(void)
 {
 	static const char *system_wide;
+
 	if (!system_wide)
-		system_wide = system_path(ETC_PERFCONFIG);
+		/*
+		 * ETC_PERFCONFIG is absolute, so its unresolved path is
+		 * the same string, better than the callers crashing.
+		 */
+		system_wide = system_path(ETC_PERFCONFIG) ?: ETC_PERFCONFIG;
+
 	return system_wide;
 }
 
Signature · 1 line
2.55.0
#4 lore raw

Re: [PATCH v8 2/9] perf config: Make perf_etc_perfconfig() never return NULL

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 10 lines

From: Arnaldo Carvalho de Melo <[email protected]>

perf_etc_perfconfig() returns what system_path() gives, and that allocates, so on failure every caller dereferenced NULL, the pre-existing ones in perf_config_set__init() and in the daemon included. For the usual absolute ETC_PERFCONFIG system_path() just returns a strdup of it, so use ETC_PERFCONFIG itself when that fails.

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2
author maintainer
#5 lore raw

PATCH v8 3/9 perf mutex: Add DEFINE_MUTEX() static initializer

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

For file scope mutexes, so that they don't need a constructor function to initialize them at startup, mirroring PTHREAD_MUTEX_INITIALIZER while keeping the clang -Wthread-safety annotations of struct mutex.

---
 tools/perf/util/mutex.h | 3 +++
 1 file changed, 3 insertions(+)
tools/perf/util/mutex.h +3 -0
index 70232d8d094f8bfc..b85a80ad60386aed 100644
@@ -92,6 +92,9 @@ struct LOCKABLE mutex {
 	pthread_mutex_t lock;
 };
 
+/* Statically initialized mutex, for the file scope ones. */
+#define DEFINE_MUTEX(name) struct mutex name = { .lock = PTHREAD_MUTEX_INITIALIZER }
+
 /* A wrapper around the condition variable implementation. */
 struct cond {
 	pthread_cond_t cond;
Signature · 1 line
2.55.0
#6 lore raw

Re: [PATCH v8 3/9] perf mutex: Add DEFINE_MUTEX() static initializer

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 8 lines

From: Arnaldo Carvalho de Melo <[email protected]>

For file scope mutexes, so that they don't need a constructor function to initialize them at startup, mirroring PTHREAD_MUTEX_INITIALIZER while keeping the clang -Wthread-safety annotations of struct mutex.

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=3
author maintainer
#7 lore raw

PATCH v8 4/9 perf mutex: Add DO_ONCE() for one-time initialization

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

For lazy init that more than one thread can race into, without pthread_once() so that it stays within perf's locking primitives and clang's -Wthread-safety keeps an eye on the mutexes involved.

Mirrors the kernel's include/linux/once.h DO_ONCE(), dropping its static key fast path, unnecessary at these cold init paths: a per call site static bool plus a statically initialized mutex, double checked. As there, code reachable from more than one call site must go through a common helper.

The lockless fast path reads ___done with __atomic_load_n(..., __ATOMIC_ACQUIRE), paired with the __atomic_store_n(..., __ATOMIC_RELEASE) store after fn(), so that its side effects are visible to threads that take the fast path; the __atomic builtins over the smp_load_acquire()/smp_store_release() variants because ThreadSanitizer understands the builtins, avoiding reports on ___done and on what fn() initialized.

---
 tools/perf/util/mutex.h | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
tools/perf/util/mutex.h +24 -0
index b85a80ad60386aed..ef1ab6dd8c09556f 100644
@@ -95,6 +95,30 @@ struct LOCKABLE mutex {
 /* Statically initialized mutex, for the file scope ones. */
 #define DEFINE_MUTEX(name) struct mutex name = { .lock = PTHREAD_MUTEX_INITIALIZER }
 
+/*
+ * Runs fn() exactly once however many threads race to it, the rest wait
+ * for it to finish; per call site state, so multiple sites wanting the
+ * same once use a common helper, as in the kernel's DO_ONCE().
+ */
+#define DO_ONCE(fn, ...)						       \
+	({								       \
+		static bool ___done;					       \
+		static DEFINE_MUTEX(___once_lock);			       \
+		bool ___ret = false;					       \
+									       \
+		if (!__atomic_load_n(&___done, __ATOMIC_ACQUIRE)) {	       \
+			mutex_lock(&___once_lock);			       \
+			if (!___done) {					       \
+				fn(__VA_ARGS__);			       \
+				__atomic_store_n(&___done, true,	       \
+						 __ATOMIC_RELEASE);	       \
+				___ret = true;				       \
+			}						       \
+			mutex_unlock(&___once_lock);			       \
+		}							       \
+		___ret;							       \
+	})
+
 /* A wrapper around the condition variable implementation. */
 struct cond {
 	pthread_cond_t cond;
Signature · 1 line
2.55.0
#8 lore raw

Re: [PATCH v8 4/9] perf mutex: Add DO_ONCE() for one-time initialization

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 20 lines

From: Arnaldo Carvalho de Melo <[email protected]>

For lazy init that more than one thread can race into, without pthread_once() so that it stays within perf's locking primitives and clang's -Wthread-safety keeps an eye on the mutexes involved.

Mirrors the kernel's include/linux/once.h DO_ONCE(), dropping its static key fast path, unnecessary at these cold init paths: a per call site static bool plus a statically initialized mutex, double checked. As there, code reachable from more than one call site must go through a common helper.

The lockless fast path reads ___done with __atomic_load_n(..., __ATOMIC_ACQUIRE), paired with the __atomic_store_n(..., __ATOMIC_RELEASE) store after fn(), so that its side effects are visible to threads that take the fast path; the __atomic builtins over the smp_load_acquire()/smp_store_release() variants because ThreadSanitizer understands the builtins, avoiding reports on ___done and on what fn() initialized.

Quoted 2 lines

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=4
author maintainer
#9 lore raw

PATCH v8 5/9 perf config: Serialize config file access with a mutex

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

Config file access shares the static parser state and, since perf_config__set_variable() became an entry point for background features, can run on more than one thread: a feature writing the config while perf top's display thread reads it. Serialize parsing and rewriting with config_mutex and the whole read-modify-write of perf_config__set_variable() with config_update_mutex; config_set_mutex comes before it, as building the set parses the config files.

perf has its own mutex type, util/mutex.h; the file scope mutexes here use the DEFINE_MUTEX() static initializer added in the previous patch. The two lazy inits that system_path() and home_perfconfig() do would leak all but one of the strings racing on two threads, so they move to DO_ONCE(), added in the previous patch as well. bad_config() runs on the dispatching thread, outside config_mutex, so it stops reading config_file_name, which the parsing thread owns.

---
 tools/perf/util/config.c | 106 +++++++++++++++++++++++++++------------
 1 file changed, 73 insertions(+), 33 deletions(-)
tools/perf/util/config.c +73 -33
index 6e0ff8a9140ccf96..287401f159e66e8c 100644
@@ -31,6 +31,7 @@
 #include "callchain.h"
 #include "debug.h"
 #include "header.h"
+#include "mutex.h"
 #include "path.h"
 #include "srcline.h"
 #include "unwind.h"
@@ -371,10 +372,8 @@ static int perf_parse_long(const char *value, long *ret)
 
 static void bad_config(const char *name)
 {
-	if (config_file_name)
-		pr_warning("bad config value for '%s' in %s, ignoring...\n", name, config_file_name);
-	else
-		pr_warning("bad config value for '%s', ignoring...\n", name);
+	/* config_file_name is owned by the parsing thread, under config_mutex. */
+	pr_warning("bad config value for '%s', ignoring...\n", name);
 }
 
 int perf_config_u64(u64 *dest, const char *name, const char *value)
@@ -550,11 +549,18 @@ int perf_default_config(const char *var, const char *value,
 	return 0;
 }
 
+/* Parsing and rewriting share the static parser state. */
+static DEFINE_MUTEX(config_mutex);
+
+/* Serializes whole perf_config__set_variable() updates. */
+static DEFINE_MUTEX(config_update_mutex);
+
 static int perf_config_from_file(config_fn_t fn, const char *filename, void *data)
 {
 	int ret;
 	FILE *f = fopen(filename, "r");
 
+	mutex_lock(&config_mutex);
 	ret = -1;
 	if (f) {
 		config_file = f;
@@ -565,21 +571,24 @@ static int perf_config_from_file(config_fn_t fn, const char *filename, void *dat
 		fclose(f);
 		config_file_name = NULL;
 	}
+	mutex_unlock(&config_mutex);
 	return ret;
 }
 
-const char *perf_etc_perfconfig(void)
-{
-	static const char *system_wide;
+/* system_path() allocates, so it is computed once. */
+static const char *etc_perfconfig;
 
-	if (!system_wide)
-		/*
-		 * ETC_PERFCONFIG is absolute, so its unresolved path is
-		 * the same string, better than the callers crashing.
-		 */
-		system_wide = system_path(ETC_PERFCONFIG) ?: ETC_PERFCONFIG;
+static void perf_etc_perfconfig__init(void)
+{
+	etc_perfconfig = system_path(ETC_PERFCONFIG);
+	if (!etc_perfconfig)
+		etc_perfconfig = ETC_PERFCONFIG;
+}
 
-	return system_wide;
+const char *perf_etc_perfconfig(void)
+{
+	DO_ONCE(perf_etc_perfconfig__init);
+	return etc_perfconfig;
 }
 
 static int perf_env_bool(const char *k, int def)
@@ -637,19 +646,18 @@ static char *home_perfconfig(void)
 	return NULL;
 }
 
-const char *perf_home_perfconfig(void)
-{
-	static const char *config;
-	static bool failed;
-
-	if (failed || config)
-		return config;
+/* home_perfconfig() allocates and warns, so it is computed once. */
+static const char *home_config;
 
-	config = home_perfconfig();
-	if (!config)
-		failed = true;
+static void perf_home_perfconfig__init(void)
+{
+	home_config = home_perfconfig();
+}
 
-	return config;
+const char *perf_home_perfconfig(void)
+{
+	DO_ONCE(perf_home_perfconfig__init);
+	return home_config;
 }
 
 static struct perf_config_section *find_section(struct list_head *sections,
@@ -790,8 +798,15 @@ static int collect_config(const char *var, const char *value,
 int perf_config_set__collect(struct perf_config_set *set, const char *file_name,
 			     const char *var, const char *value)
 {
+	int ret;
+
+	mutex_lock(&config_mutex);
 	config_file_name = file_name;
-	return collect_config(var, value, set);
+	ret = collect_config(var, value, set);
+	/* Don't leave the static parser state pointing at the caller's buffer. */
+	config_file_name = NULL;
+	mutex_unlock(&config_mutex);
+	return ret;
 }
 
 static int perf_config_set__init(struct perf_config_set *set)
@@ -838,6 +853,10 @@ struct perf_config_set *perf_config_set__load_file(const char *file)
 	return set;
 }
 
+/* Not config_mutex: building the set parses the config files, which takes it. */
+static DEFINE_MUTEX(config_set_mutex);
+
+/* Called with config_set_mutex held. */
 static int perf_config__init(void)
 {
 	if (config_set == NULL)
@@ -878,16 +897,26 @@ int perf_config_set(struct perf_config_set *set,
 
 int perf_config(config_fn_t fn, void *data)
 {
-	if (config_set == NULL && perf_config__init())
+	struct perf_config_set *set;
+
+	/* Not held across the dispatch: a callback can call perf_config() again. */
+	mutex_lock(&config_set_mutex);
+	if (perf_config__init()) {
+		mutex_unlock(&config_set_mutex);
 		return -1;
+	}
+	set = config_set;
+	mutex_unlock(&config_set_mutex);
 
-	return perf_config_set(config_set, fn, data);
+	return perf_config_set(set, fn, data);
 }
 
 void perf_config__exit(void)
 {
+	mutex_lock(&config_set_mutex);
 	perf_config_set__delete(config_set);
 	config_set = NULL;
+	mutex_unlock(&config_set_mutex);
 }
 
 int perf_config_set__write(struct perf_config_set *set,
@@ -898,9 +927,12 @@ int perf_config_set__write(struct perf_config_set *set,
 	int ret = 0;
 	FILE *fp;
 
+	mutex_lock(&config_mutex);
 	fp = fopen(file_name, "w");
-	if (!fp)
+	if (!fp) {
+		mutex_unlock(&config_mutex);
 		return -1;
+	}
 
 	if (fprintf(fp, "# this file is auto-generated.\n") < 0)
 		ret = -1;
@@ -922,6 +954,7 @@ int perf_config_set__write(struct perf_config_set *set,
 	}
 	if (fclose(fp) != 0)
 		ret = -1;
+	mutex_unlock(&config_mutex);
 
 	return ret;
 }
@@ -933,14 +966,20 @@ int perf_config_set__write(struct perf_config_set *set,
  */
 int perf_config__set_variable(const char *var, const char *value)
 {
-	char path[PATH_MAX];
-	char *user_config = mkpath(path, sizeof(path), "%s/.perfconfig", getenv("HOME"));
 	const char *config_filename;
 	bool system_config;
-	struct perf_config_set *set;
+	struct perf_config_set *set = NULL;
 	int ret = -1;
 
-	config_filename = config_exclusive_filename ?: user_config;
+	mutex_lock(&config_update_mutex);
+
+	/* Static: the parser publishes it as config_file_name. */
+	{
+		static char path[PATH_MAX];
+		char *user_config = mkpath(path, sizeof(path), "%s/.perfconfig", getenv("HOME"));
+
+		config_filename = config_exclusive_filename ?: user_config;
+	}
 
 	/* Rewriting the system wide file keeps its entries, or it is truncated. */
 	system_config = strcmp(config_filename, perf_etc_perfconfig()) == 0;
@@ -962,6 +1001,7 @@ int perf_config__set_variable(const char *var, const char *value)
 	ret = 0;
 out_err:
 	perf_config_set__delete(set);
+	mutex_unlock(&config_update_mutex);
 	return ret;
 }
 
Signature · 1 line
2.55.0
#10 lore raw

Re: [PATCH v8 5/9] perf config: Serialize config file access with a mutex

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 18 lines

From: Arnaldo Carvalho de Melo <[email protected]>

Config file access shares the static parser state and, since perf_config__set_variable() became an entry point for background features, can run on more than one thread: a feature writing the config while perf top's display thread reads it. Serialize parsing and rewriting with config_mutex and the whole read-modify-write of perf_config__set_variable() with config_update_mutex; config_set_mutex comes before it, as building the set parses the config files.

perf has its own mutex type, util/mutex.h; the file scope mutexes here use the DEFINE_MUTEX() static initializer added in the previous patch. The two lazy inits that system_path() and home_perfconfig() do would leak all but one of the strings racing on two threads, so they move to DO_ONCE(), added in the previous patch as well. bad_config() runs on the dispatching thread, outside config_mutex, so it stops reading config_file_name, which the parsing thread owns.

Quoted 2 lines

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=5
author maintainer
#11 lore raw

PATCH v8 6/9 perf report: Add --progress option

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

Processing a large session with stdio output gives no feedback about which phase perf is in or how far along it is: ui_progress updates are only shown by the TUI. Add --progress, installing a stdio backend (ui/stdio/progress.c) that prints the phase title, percentage and counts:

Processing events... [ 42.3%] 317M / 746M

Phases can be nested, so the backend tracks the ones started to complete the right one on ui_progress__finish(); that requires init()/finish() pairs, fixed in ordered-events.c and the pipe and directory event processing.

---
 tools/perf/Documentation/perf-report.txt |  14 ++
 tools/perf/builtin-report.c              |   6 +
 tools/perf/ui/Build                      |   1 +
 tools/perf/ui/progress.h                 |   2 +
 tools/perf/ui/stdio/progress.c           | 162 +++++++++++++++++++++++
 tools/perf/util/ordered-events.c         |  16 ++-
 tools/perf/util/session.c                |  12 +-
 7 files changed, 206 insertions(+), 7 deletions(-)
 create mode 100644 tools/perf/ui/stdio/progress.c
tools/perf/Documentation/perf-report.txt +14 -0
index 3718ebd297ce0673..a7429a30ec28f903 100644
@@ -29,6 +29,20 @@ OPTIONS
 --quiet::
 	Do not show any warnings or messages.  (Suppress -v)
 
+--progress::
+	Show progress for each of the processing phases, printing the
+	percentage done and the current/total counts: the first phase
+	counts the bytes of the perf.data file processed so far, the
+	merge and sort phases count hist entries, e.g.:
+
+	Processing events... [ 42.3%] 4G / 10G
+	Merging related events... [  7.1%] 1024 / 14387
+	Sorting events for output... [ 98.2%] 14132 / 14387
+
+	It is a no-op when using the TUI or GTK browsers, that already
+	present progress information, or when --quiet is used, that asks
+	for no messages at all.
+
 -n::
 --show-nr-samples::
 	Show the number of samples for each symbol
tools/perf/builtin-report.c +6 -0
index 57225bc87731d074..81e13fb8194976c9 100644
@@ -87,6 +87,7 @@ struct report {
 	bool			use_gtk;
 #endif
 	bool			use_stdio;
+	bool			progress;
 	bool			show_full_info;
 	bool			show_threads;
 	bool			inverted_callchain;
@@ -1384,6 +1385,8 @@ int cmd_report(int argc, const char **argv)
 		    "Use the stdio interface"),
 	OPT_BOOLEAN(0, "weights", &symbol_conf.annotate_weight,
 			"Show or hide weight columns in annotation. Default show if non-zero."),
+	OPT_BOOLEAN(0, "progress", &report.progress,
+		    "Show progress while processing the perf.data file"),
 	OPT_BOOLEAN(0, "header", &report.header, "Show data header."),
 	OPT_BOOLEAN(0, "header-only", &report.header_only,
 		    "Show only data header."),
@@ -1790,6 +1793,9 @@ int cmd_report(int argc, const char **argv)
 	else
 		use_browser = 0;
 
+	if (report.progress && !quiet && use_browser == 0)
+		stdio_progress__init();
+
 	if (report.data_type && use_browser == 1) {
 		symbol_conf.annotate_data_member = true;
 		symbol_conf.annotate_data_sample = true;
tools/perf/ui/Build +1 -0
index 6005f813c9e3990c..a7b1740d51c80f23 100644
@@ -4,6 +4,7 @@ perf-ui-y += progress.o
 perf-ui-y += util.o
 perf-ui-y += hist.o
 perf-ui-y += stdio/hist.o
+perf-ui-y += stdio/progress.o
 
 CFLAGS_setup.o += -DLIBDIR="BUILD_STR($(LIBDIR))"
 
tools/perf/ui/progress.h +2 -0
index 4f52c37b2f099a82..03f1a8bb260ba076 100644
@@ -23,6 +23,8 @@ void __ui_progress__init(struct ui_progress *p, u64 total,
 
 void ui_progress__update(struct ui_progress *p, u64 adv);
 
+void stdio_progress__init(void);
+
 struct ui_progress_ops {
 	void (*init)(struct ui_progress *p);
 	void (*update)(struct ui_progress *p);
tools/perf/ui/stdio/progress.c new file +162 -0

162 lines not on this page · raw message

tools/perf/util/ordered-events.c +12 -4
index a5857f9f5af2d3de..54c85663e733be4d 100644
@@ -237,14 +237,16 @@ static int do_flush(struct ordered_events *oe, bool show_progress)
 		ui_progress__init(&prog, oe->nr_events, "Processing time ordered events...");
 
 	list_for_each_entry_safe(iter, tmp, head, list) {
-		if (session_done())
-			return 0;
+		if (session_done()) {
+			ret = 0;
+			goto out_progress;
+		}
 
 		if (iter->timestamp > limit)
 			break;
 		ret = oe->deliver(oe, iter);
 		if (ret < 0)
-			return ret;
+			goto out_progress;
 
 		ordered_events__delete(oe, iter);
 		oe->last_flush = iter->timestamp;
@@ -258,10 +260,16 @@ static int do_flush(struct ordered_events *oe, bool show_progress)
 	else if (last_ts <= limit)
 		oe->last = list_entry(head->prev, struct ordered_event, list);
 
+	ret = 0;
+out_progress:
+	/*
+	 * Always pair ui_progress__init() with ui_progress__finish(), the
+	 * stdio backend tracks the phases on a stack.
+	 */
 	if (show_progress)
 		ui_progress__finish();
 
-	return 0;
+	return ret;
 }
 
 static int __ordered_events__flush(struct ordered_events *oe, enum oe_flush how,
tools/perf/util/session.c +9 -3
index 7fea9e72726c936c..c4b4c7fb3b864589 100644
@@ -3253,8 +3253,12 @@ static int __perf_session__process_pipe_events(struct perf_session *session)
 	cur_size = sizeof(union perf_event);
 
 	buf = malloc(cur_size);
-	if (!buf)
-		return -errno;
+	if (!buf) {
+		err = -errno;
+		if (update_prog)
+			ui_progress__finish();
+		return err;
+	}
 	ordered_events__set_copy_on_queue(oe, true);
 more:
 	event = buf;
@@ -3753,8 +3757,10 @@ static int __perf_session__process_dir_events(struct perf_session *session)
 	}
 
 	rd = calloc(nr_readers, sizeof(struct reader));
-	if (!rd)
+	if (!rd) {
+		ui_progress__finish();
 		return -ENOMEM;
+	}
 
 	rd[0] = (struct reader) {
 		.fd		 = perf_data__fd(session->data),
Signature · 1 line
2.55.0
#12 lore raw

Re: [PATCH v8 6/9] perf report: Add --progress option

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 10 lines

From: Arnaldo Carvalho de Melo <[email protected]>

Processing a large session with stdio output gives no feedback about which phase perf is in or how far along it is: ui_progress updates are only shown by the TUI. Add --progress, installing a stdio backend (ui/stdio/progress.c) that prints the phase title, percentage and counts:

Processing events... [ 42.3%] 317M / 746M

Quoted 7 lines

Phases can be nested, so the backend tracks the ones started to complete the right one on ui_progress__finish(); that requires init()/finish() pairs, fixed in ordered-events.c and the pipe and directory event processing.

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=6
author maintainer
#13 lore raw

PATCH v8 7/9 perf report: Add --no-progress option

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

Now that --progress is being added for the stdio case, wire up its counterpart for the browsers: the TUI and GTK ones present progress of their own and there is no way to turn it off. Install the no-op ui_progress ops, the ones already used until a backend sets theirs, after setup_browser() installed the ones of the browser in use.

The phases are still counted, nothing is shown for them, and no second option is needed for it: parse-options provides --no-progress as the negation of --progress, report.progress_set saying that it was asked for, report.progress being false both when nothing was asked for and when --no-progress was.

---
 tools/perf/Documentation/perf-report.txt | 5 +++++
 tools/perf/builtin-report.c              | 9 ++++++---
 tools/perf/ui/progress.c                 | 6 ++++++
 tools/perf/ui/progress.h                 | 2 ++
 4 files changed, 19 insertions(+), 3 deletions(-)
tools/perf/Documentation/perf-report.txt +5 -0
index a7429a30ec28f903..e145124d6c9a1097 100644
@@ -43,6 +43,11 @@ OPTIONS
 	present progress information, or when --quiet is used, that asks
 	for no messages at all.
 
+--no-progress::
+	Do not show progress while processing the perf.data file.  It
+	also turns off the progress the TUI and GTK browsers present,
+	which is their own.
+
 -n::
 --show-nr-samples::
 	Show the number of samples for each symbol
tools/perf/builtin-report.c +6 -3
index 81e13fb8194976c9..29085fdc91e58884 100644
@@ -88,6 +88,7 @@ struct report {
 #endif
 	bool			use_stdio;
 	bool			progress;
+	bool			progress_set;
 	bool			show_full_info;
 	bool			show_threads;
 	bool			inverted_callchain;
@@ -1385,8 +1386,8 @@ int cmd_report(int argc, const char **argv)
 		    "Use the stdio interface"),
 	OPT_BOOLEAN(0, "weights", &symbol_conf.annotate_weight,
 			"Show or hide weight columns in annotation. Default show if non-zero."),
-	OPT_BOOLEAN(0, "progress", &report.progress,
-		    "Show progress while processing the perf.data file"),
+	OPT_BOOLEAN_SET(0, "progress", &report.progress, &report.progress_set,
+			"Show progress while processing the perf.data file"),
 	OPT_BOOLEAN(0, "header", &report.header, "Show data header."),
 	OPT_BOOLEAN(0, "header-only", &report.header_only,
 		    "Show only data header."),
@@ -1793,7 +1794,9 @@ int cmd_report(int argc, const char **argv)
 	else
 		use_browser = 0;
 
-	if (report.progress && !quiet && use_browser == 0)
+	if (report.progress_set && !report.progress)
+		ui_progress__noop_init();
+	else if (report.progress && !quiet && use_browser == 0)
 		stdio_progress__init();
 
 	if (report.data_type && use_browser == 1) {
tools/perf/ui/progress.c +6 -0
index 99d60223c74b2957..362680989ace606a 100644
@@ -13,6 +13,12 @@ static struct ui_progress_ops null_progress__ops =
 
 struct ui_progress_ops *ui_progress__ops = &null_progress__ops;
 
+/* Everything counts but nothing is shown, the way it starts out. */
+void ui_progress__noop_init(void)
+{
+	ui_progress__ops = &null_progress__ops;
+}
+
 void ui_progress__update(struct ui_progress *p, u64 adv)
 {
 	u64 last = p->curr;
tools/perf/ui/progress.h +2 -0
index 03f1a8bb260ba076..e8c4f9f768aaf12b 100644
@@ -25,6 +25,8 @@ void ui_progress__update(struct ui_progress *p, u64 adv);
 
 void stdio_progress__init(void);
 
+void ui_progress__noop_init(void);
+
 struct ui_progress_ops {
 	void (*init)(struct ui_progress *p);
 	void (*update)(struct ui_progress *p);
Signature · 1 line
2.55.0
#14 lore raw

Re: [PATCH v8 7/9] perf report: Add --no-progress option

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 14 lines

From: Arnaldo Carvalho de Melo <[email protected]>

Now that --progress is being added for the stdio case, wire up its counterpart for the browsers: the TUI and GTK ones present progress of their own and there is no way to turn it off. Install the no-op ui_progress ops, the ones already used until a backend sets theirs, after setup_browser() installed the ones of the browser in use.

The phases are still counted, nothing is shown for them, and no second option is needed for it: parse-options provides --no-progress as the negation of --progress, report.progress_set saying that it was asked for, report.progress being false both when nothing was asked for and when --no-progress was.

Quoted 3 lines

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=7
author maintainer
#15 lore raw

PATCH v8 8/9 perf scripts: Add perf-stuck, to tell where a running perf is stuck

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

A perf that takes forever is hard to tell apart from one stuck in a loop, and there is no way to see where without attaching gdb. perf-stuck.sh samples a running process' /proc entries and its progress line at a fixed interval, and with -g runs gdb (perf-stuck.gdb, adding the perf-die-chain command) when no progress is made across two samples, printing the DIE chain a DWARF type chase is stuck in.

It is a prototype: the plan is to turn it into a first class 'perf stuck' command. The process name is resolved with pgrep among the caller's own processes only, as root an unscoped one would attach gdb to the first process of any user with a matching name.

-i and -n are now validated instead of failing later inside the sampling loop, -x now requires -g and gets the same readability check as the default gdb command file, and gdb_done is cleared whenever progress resumes, so -g can fire again on a later stall instead of at most once per run.

---
 tools/perf/scripts/perf-stuck.gdb | 131 ++++++++++++++++++++
 tools/perf/scripts/perf-stuck.sh  | 193 ++++++++++++++++++++++++++++++
 2 files changed, 324 insertions(+)
 create mode 100644 tools/perf/scripts/perf-stuck.gdb
 create mode 100755 tools/perf/scripts/perf-stuck.sh
tools/perf/scripts/perf-stuck.gdb new file +131 -0
new file mode 100644
index 0000000000000000..b7f810198272ebf7
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# gdb commands for a stuck perf, used by perf-stuck.sh -g and usable directly:
+#
+#   gdb -p $(pgrep -x perf) -batch -x perf-stuck.gdb -ex bt
+#
+# PROTOTYPE: part of the perf-stuck.sh stopgap, wants to become a first
+# class 'perf stuck' command printing these DIE chains without gdb.
+#
+# The commands are for the DWARF type chasers in util/dwarf-aux.c:
+#
+#   perf-die-chain <function> <die variable> [iterations]
+#   perf-die-chain-all [iterations]
+#   perf-dso
+#
+# For each iteration of the chasing loop they print the DIE address, the
+# CU, its file offset, tag and name: a cycle shows as the same (addr, cu)
+# pairs repeating, and a CU changing between iterations means the chase
+# hops between a debug file and its dwz common file.
+
+set pagination off
+set confirm off
+set debuginfod enabled off
+set print pretty on
+set height 0
+set width 0
+
+define perf-die-chain
+  if $argc < 2
+    printf "usage: perf-die-chain <function> <die variable> [iterations]\n"
+  else
+    frame function $arg0
+    if $argc == 3
+      set $perf_die_chain_n = $arg2
+    else
+      set $perf_die_chain_n = 10
+    end
+    set $perf_die_chain_head = $pc
+    set $perf_die_chain_i = 0
+    while $perf_die_chain_i < $perf_die_chain_n
+      # Pointer type DIEs have no DW_AT_name, so dwarf_diename() can
+      # return NULL: printf %s of it would error out and abort this
+      # batch script, handle it.
+      set $perf_die_chain_name = (char *) dwarf_diename($arg1)
+      printf "chain[%d] die=%p addr=%p cu=%p off=0x%lx tag=%d name=", \
+	     $perf_die_chain_i, $arg1, $arg1->addr, $arg1->cu, \
+	     ((Dwarf_Off) dwarf_dieoffset($arg1)), ((int) dwarf_tag($arg1))
+      if $perf_die_chain_name == 0
+	printf "(null)\n"
+      else
+	printf "%s\n", $perf_die_chain_name
+      end
+      until *$perf_die_chain_head
+      set $perf_die_chain_i = $perf_die_chain_i + 1
+    end
+  end
+end
+
+document perf-die-chain
+Print the DIE chain being walked by a DWARF type chasing loop.
+usage: perf-die-chain <function> <die variable> [iterations]
+  perf-die-chain die_get_pointer_type type_die
+  perf-die-chain __die_get_real_type vr_die
+  perf-die-chain die_get_real_type vr_die
+end
+
+define perf-die-chain-all
+  if $argc == 0
+    set $perf_die_chain_n = 10
+  else
+    set $perf_die_chain_n = $arg0
+  end
+  if $_any_caller_is("die_get_pointer_type", 20)
+    printf "stuck in die_get_pointer_type():\n"
+    perf-die-chain die_get_pointer_type type_die $perf_die_chain_n
+  else
+    if $_any_caller_is("__die_get_real_type", 20)
+      printf "stuck in __die_get_real_type():\n"
+      perf-die-chain __die_get_real_type vr_die $perf_die_chain_n
+    else
+      if $_any_caller_is("die_get_real_type", 20)
+        printf "stuck in die_get_real_type():\n"
+        perf-die-chain die_get_real_type vr_die $perf_die_chain_n
+      else
+        printf "not in a DWARF type chaser, try: bt\n"
+      end
+    end
+  end
+end
+
+document perf-die-chain-all
+Find which DWARF type chaser the process is in and print the DIE chain.
+usage: perf-die-chain-all [iterations]
+end
+
+define perf-dso
+  if $_any_caller_is("find_data_type", 20)
+    frame function find_data_type
+    # REFCNT_CHECKING, implied by an ASan/LSan build, wraps struct map and
+    # struct dso in a proxy keeping the real object in ->orig, the dso being
+    # map->orig->dso->orig there; struct symbol is not wrapped, so sym->name
+    # needs no ->orig.  There is no way to ask gdb which layout it is looking
+    # at, so walk each candidate until one evaluates.  Requiring gdb's Python
+    # here adds nothing: $_any_caller_is() is one of its functions already.
+    python
+import gdb
+
+dso = None
+for expr in ("dloc->ms->map->dso->name",
+             "dloc->ms->map->orig->dso->orig->name"):
+    try:
+        gdb.parse_and_eval(expr)
+        dso = expr
+        break
+    except gdb.error:
+        pass
+
+if dso is None:
+    print("dso=(no such member in struct map)")
+else:
+    gdb.execute('printf "dso=%s ip=0x%lx sym=%s\\n", ' + dso +
+                ', dloc->ip, dloc->ms->sym ? dloc->ms->sym->name : "(no symbol)"')
+    end
+  else
+    printf "not in find_data_type()\n"
+  end
+end
+
+document perf-dso
+Print the dso, ip and symbol of the data location being resolved.
+end
tools/perf/scripts/perf-stuck.sh new file +193 -0

193 lines not on this page · raw message

Signature · 1 line
2.55.0
#16 lore raw

Re: [PATCH v8 8/9] perf scripts: Add perf-stuck, to tell where a running perf is stuck

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 14 lines

From: Arnaldo Carvalho de Melo <[email protected]>

A perf that takes forever is hard to tell apart from one stuck in a loop, and there is no way to see where without attaching gdb. perf-stuck.sh samples a running process' /proc entries and its progress line at a fixed interval, and with -g runs gdb (perf-stuck.gdb, adding the perf-die-chain command) when no progress is made across two samples, printing the DIE chain a DWARF type chase is stuck in.

It is a prototype: the plan is to turn it into a first class 'perf stuck' command. The process name is resolved with pgrep among the caller's own processes only, as root an unscoped one would attach gdb to the first process of any user with a matching name.

Quoted 8 lines

-i and -n are now validated instead of failing later inside the sampling loop, -x now requires -g and gets the same readability check as the default gdb command file, and gdb_done is cleared whenever progress resumes, so -g can fire again on a later stall instead of at most once per run.

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=8
author maintainer
#17 lore raw

PATCH v8 9/9 perf test: Add false_sharing workload exhibiting cross-CPU false sharing

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

Add a 'perf test -w false_sharing' workload that hammers one shared struct from several CPUs, shaped as a TCP connection: a read-mostly identity (five-tuple) shares a cacheline with per-packet rx counters (the false-sharing line), a second line has packet-path private tx and congestion control counters, and a third the connection config.

The packet path runs in the main thread and up to four lookup threads sum the five-tuple and pull the config, reading one volatile shared instance directly so the accesses are PC-relative and resolvable by the data type profiler.

Data type profiling of the workload with cacheline info:

  $ perf mem record -- perf test -r5 -w false_sharing
  [ perf record: Woken up 19 times to write data ]
  [ perf record: Captured and wrote 5.612 MB perf.data (72454 samples) ]
  $ perf report -s type,typecln -H --group --stdio
  # Total Lost Samples: 0
  #
  # Samples: 72K of events 'cpu/mem-loads,ldlat=30/P, cpu/mem-stores/P'
  # Event count (approx.): 1261814616
  #
  #            Overhead  Data Type / Data Type Cacheline
  # ...................  ...............................
  #
      88.99%  35.88%     struct net_conn
         56.43%  17.50%     struct net_conn: cache-line 0
         32.55%   0.00%     struct net_conn: cache-line 2
          0.01%  18.38%     struct net_conn: cache-line 1
      10.08%  63.03%     (unknown)
         10.08%  63.03%     (unknown): cache-line 0
       0.82%   0.13%     int
          0.82%   0.13%     int: cache-line 0
       0.01%   0.02%     struct folio
          0.01%   0.02%     struct folio: cache-line 0
       0.01%   0.03%     Elf64_Addr
          0.01%   0.03%     Elf64_Addr: cache-line 0
       0.01%   0.03%     struct sched_entity
          0.01%   0.03%     struct sched_entity: cache-line 1
          0.00%   0.00%     struct sched_entity: cache-line 4
          0.00%   0.00%     struct sched_entity: cache-line 2
          0.00%   0.00%     struct sched_entity: cache-line 3
          0.00%   0.00%     struct sched_entity: cache-line 0
       0.01%   0.00%     struct task_group
          0.01%   0.00%     struct task_group: cache-line 4
          0.00%   0.00%     struct task_group: cache-line 5
       0.00%   0.00%     struct css_rstat_cpu
          0.00%   0.00%     struct css_rstat_cpu: cache-line 0
  $ perf report -s type,typecln,typeoff -H --group --stdio
  # Total Lost Samples: 0
  #
  # Samples: 72K of events 'cpu/mem-loads,ldlat=30/P, cpu/mem-stores/P'
  # Event count (approx.): 1261814616
  #
  #               Overhead  Data Type / Data Type Cacheline / Data Type Offset
  # ......................  ..................................................
  #
      88.99%  35.88%        struct net_conn
         56.43%  17.50%        struct net_conn: cache-line 0
             9.81%   0.00%        struct net_conn +0xa (dport)
             9.54%   0.00%        struct net_conn +0x8 (sport)
             9.53%   0.00%        struct net_conn +0xc (state)
             9.48%   0.00%        struct net_conn +0xd (protocol)
             9.27%   0.00%        struct net_conn +0x4 (daddr)
             8.79%   0.00%        struct net_conn +0 (saddr)
             0.00%  12.08%        struct net_conn +0x10 (bytes_rx)
             0.00%   1.71%        struct net_conn +0x18 (packets_rx)
             0.00%   2.80%        struct net_conn +0x20 (rx_queue)
             0.00%   0.91%        struct net_conn +0x3c (last_ack)
         32.55%   0.00%        struct net_conn: cache-line 2
             5.70%   0.00%        struct net_conn +0x83 (rcv_wscale)
             5.46%   0.00%        struct net_conn +0x84 (keepalive_int)
             5.43%   0.00%        struct net_conn +0x82 (snd_wscale)
             5.39%   0.00%        struct net_conn +0x80 (mss)
             5.34%   0.00%        struct net_conn +0x88 (mark)
             5.23%   0.00%        struct net_conn +0x8c (priority)
          0.01%  18.38%        struct net_conn: cache-line 1
             0.01%   0.05%        struct net_conn +0x5c (retrans)
             0.00%   4.83%        struct net_conn +0x40 (bytes_tx)
             0.00%  10.63%        struct net_conn +0x48 (packets_tx)
             0.00%   1.54%        struct net_conn +0x58 (rtt_us)
             0.00%   1.07%        struct net_conn +0x50 (cwnd)
             0.00%   0.25%        struct net_conn +0x54 (ssthresh)
      10.08%  63.03%        (unknown)
         10.08%  63.03%        (unknown): cache-line 0
            10.08%  63.03%        (unknown)
       0.82%   0.13%        int
          0.82%   0.13%        int: cache-line 0
             0.82%   0.13%        int +0 (no field)
       0.01%   0.02%        struct folio
          0.01%   0.02%        struct folio: cache-line 0
             0.01%   0.00%        struct folio +0 (flags.f)
             0.00%   0.01%        struct folio +0x34 (_refcount.counter)
             0.00%   0.00%        struct folio +0x18 (mapping)
---
 tools/perf/tests/builtin-test.c               |   1 +
 tools/perf/tests/shell/data_type_profiling.sh |   9 +-
 tools/perf/tests/tests.h                      |   1 +
 tools/perf/tests/workloads/Build              |   2 +
 tools/perf/tests/workloads/false_sharing.c    | 251 ++++++++++++++++++
 5 files changed, 262 insertions(+), 2 deletions(-)
 create mode 100644 tools/perf/tests/workloads/false_sharing.c
tools/perf/tests/builtin-test.c +1 -0
index d2f594921e25bda9..98134b1c74cf80f4 100644
@@ -175,6 +175,7 @@ static struct test_workload *workloads[] = {
 	&workload__context_switch_loop,
 	&workload__deterministic,
 	&workload__callchain,
+	&workload__false_sharing,
 
 #ifdef HAVE_RUST_SUPPORT
 	&workload__code_with_type,
tools/perf/tests/shell/data_type_profiling.sh +7 -2
index a916c410274aa888..57203e0e5f857540 100755
@@ -8,8 +8,8 @@ set -e
 # data type profiling manifestation
 
 # Values in testtypes and testprogs should match
-testtypes=("# data-type: struct Buf" "# data-type: struct buf")
-testprogs=("perf test -w code_with_type" "perf test -w datasym")
+testtypes=("# data-type: struct Buf" "# data-type: struct buf" "# data-type: struct net_conn")
+testprogs=("perf test -w code_with_type" "perf test -w datasym" "perf test -w false_sharing")
 
 err=0
 perfdata=$(mktemp /tmp/__perf_test.perf.data.XXXXX)
@@ -59,6 +59,9 @@ test_basic_annotate() {
 
     "xC")
     index=1 ;;
+
+    "xFS")
+    index=2 ;;
   esac
 
   # Under 'set -e' a bare failing command aborts the script through the EXIT
@@ -114,6 +117,8 @@ test_basic_annotate Basic Rust
 test_basic_annotate Pipe Rust
 test_basic_annotate Basic C
 test_basic_annotate Pipe C
+test_basic_annotate Basic FS
+test_basic_annotate Pipe FS
 
 cleanup
 exit $err
tools/perf/tests/tests.h +1 -0
index 9c96f33483d14356..f379620069d34f3a 100644
@@ -250,6 +250,7 @@ DECLARE_WORKLOAD(jitdump);
 DECLARE_WORKLOAD(context_switch_loop);
 DECLARE_WORKLOAD(deterministic);
 DECLARE_WORKLOAD(callchain);
+DECLARE_WORKLOAD(false_sharing);
 
 #ifdef HAVE_RUST_SUPPORT
 DECLARE_WORKLOAD(code_with_type);
tools/perf/tests/workloads/Build +2 -0
index 048e371eb63e3164..18fceddccb56c013 100644
@@ -14,6 +14,7 @@ perf-test-y += jitdump.o
 perf-test-y += context_switch_loop.o
 perf-test-y += deterministic.o
 perf-test-y += callchain.o
+perf-test-y += false_sharing.o
 
 ifeq ($(CONFIG_RUST_SUPPORT),y)
     perf-test-y += code_with_type.o
@@ -29,3 +30,4 @@ CFLAGS_inlineloop.o       = -g -O2
 CFLAGS_deterministic.o    = -g -O0 -fno-inline -U_FORTIFY_SOURCE
 CFLAGS_named_threads.o    = -g -O0 -fno-inline -U_FORTIFY_SOURCE
 CFLAGS_callchain.o        = -g -O0 -fno-inline -U_FORTIFY_SOURCE
+CFLAGS_false_sharing.o    = -g -O0 -fno-inline -U_FORTIFY_SOURCE
tools/perf/tests/workloads/false_sharing.c new file +251 -0

251 lines not on this page · raw message

Signature · 1 line
2.55.0
#18 lore raw

Re: [PATCH v8 9/9] perf test: Add false_sharing workload exhibiting cross-CPU false sharing

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 13 lines

From: Arnaldo Carvalho de Melo <[email protected]>

Add a 'perf test -w false_sharing' workload that hammers one shared struct from several CPUs, shaped as a TCP connection: a read-mostly identity (five-tuple) shares a cacheline with per-packet rx counters (the false-sharing line), a second line has packet-path private tx and congestion control counters, and a third the connection config.

The packet path runs in the main thread and up to four lookup threads sum the five-tuple and pull the config, reading one volatile shared instance directly so the accesses are PC-relative and resolvable by the data type profiler.

Quoted 8 lines

Data type profiling of the workload with cacheline info:

[ ... ]

             0.00%   0.01%        struct folio +0x34 (_refcount.counter)
             0.00%   0.00%        struct folio +0x18 (mapping)

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=9