Skip to contentSkip to conversation

ALSA: hda/realtek: Enable headset mic on HONOR MagicBook Pro 16 2024

PATCH Superseded Denis Yakovlev 2 participants 2 messages Oct 2 – Oct 3 Sound

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: hda/realtek: Enable headset mic on HONOR MagicBook Pro 16 2024

The HONOR MagicBook Pro 16 2024 (DRA-XX, board M1020, ALC256, SSID 1ee7:204e) has a combined 3.5 mm headphone/microphone jack. The BIOS leaves the headset mic pin 0x19 at 0x411111f0, so the codec parser builds no capture path for it, and it leaves the jack switch (coefficient 0x45) in the TRS state, which cuts the microphone contact off from the codec. A wired headset microphone therefore records nothing.

Configure 0x19 as a headset microphone (0x03a1113c, "headset mic without its own jack detect"), the same value already used for the sibling M1020 board (HONOR MRB-XXX) and by the VAIO quirks, and chain to the generic headset mode handler, which detects the CTIA/OMTP headset type on every jack event and programs the jack switch accordingly. Pin 0x1a is left untouched: there is no evidence that it is wired on this board.

Assisted-by LLM

---
Tested on a HONOR MagicBook Pro 16 2024 (DRA-XX), Ubuntu 7.0.0-34, using an out-of-tree build of this change, with wired Apple EarPods (CTIA): the microphone records after several cold boots with the headset inserted and after hot-plugging; without the change the analog capture is digital silence. The headset type is detected as CTIA (coef 0x45 ends up at 0xd489). The speakers (including the "Bass Speaker" control from the speaker fix) and wired headphone playback still work. OMTP headsets were not tested (no hardware).

 sound/hda/codecs/realtek/alc269.c | 8 ++++++++
 1 file changed, 8 insertions(+)
sound/hda/codecs/realtek/alc269.c +8 -0
index 67b9f41..4e22d63 100644
@@ -4477,6 +4477,7 @@ enum {
 	ALC256_FIXUP_HONOR_MRB_XXX_M1020_AUDIO,
 	ALC256_FIXUP_HONOR_DRA_XX_SPEAKERS,
 	ALC256_FIXUP_HONOR_DRA_XX_SHARE_DAC,
+	ALC256_FIXUP_HONOR_DRA_XX_HEADSET_MODE,
 	ALC245_FIXUP_HP_ENVY_X360_15_FH0XXX,
 	ALC287_FIXUP_ACER_MICMUTE_LED,
 	ALC236_FIXUP_DELL_HP_POP_NOISE,
@@ -7215,6 +7216,7 @@ static const struct hda_fixup alc269_fixups[] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
 			{ 0x14, 0x90170111 }, /* bass speakers */
+			{ 0x19, 0x03a1113c }, /* headset mic, without its own jack detect */
 			{ }
 		},
 		.chained = true,
@@ -7223,6 +7225,12 @@ static const struct hda_fixup alc269_fixups[] = {
 	[ALC256_FIXUP_HONOR_DRA_XX_SHARE_DAC] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc256_fixup_honor_dra_xx_share_dac,
+		.chained = true,
+		.chain_id = ALC256_FIXUP_HONOR_DRA_XX_HEADSET_MODE
+	},
+	[ALC256_FIXUP_HONOR_DRA_XX_HEADSET_MODE] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc_fixup_headset_mode,
 	},
 	[ALC245_FIXUP_HP_ENVY_X360_15_FH0XXX] = {
 		.type = HDA_FIXUP_FUNC,
#1 lore raw
Quoted 19 lines · Denis Yakovlev

The HONOR MagicBook Pro 16 2024 (DRA-XX, board M1020, ALC256, SSID 1ee7:204e) has a combined 3.5 mm headphone/microphone jack. The BIOS leaves the headset mic pin 0x19 at 0x411111f0, so the codec parser builds no capture path for it, and it leaves the jack switch (coefficient 0x45) in the TRS state, which cuts the microphone contact off from the codec. A wired headset microphone therefore records nothing.

Configure 0x19 as a headset microphone (0x03a1113c, "headset mic without its own jack detect"), the same value already used for the sibling M1020 board (HONOR MRB-XXX) and by the VAIO quirks, and chain to the generic headset mode handler, which detects the CTIA/OMTP headset type on every jack event and programs the jack switch accordingly. Pin 0x1a is left untouched: there is no evidence that it is wired on this board.

Assisted-by LLM
Quoted 9 lines

---
Tested on a HONOR MagicBook Pro 16 2024 (DRA-XX), Ubuntu 7.0.0-34, using an out-of-tree build of this change, with wired Apple EarPods (CTIA): the microphone records after several cold boots with the headset inserted and after hot-plugging; without the change the analog capture is digital silence. The headset type is detected as CTIA (coef 0x45 ends up at 0xd489). The speakers (including the "Bass Speaker" control from the speaker fix) and wired headphone playback still work. OMTP headsets were not tested (no hardware).

This looks like a fix of the existing quirk. Could you point to the commit via Fixes tag and resubmit with it?

thanks,

Takashi