ov05c10 cleanups and fixes
Subsystems (2)
Sakari Ailus
maintainerv2 cover ov05c10 cleanups and fixes
Hi folks,
This small set contains a few ov05c10 driver cleanups and fixes based on Tarang's review.
since v2:
- Also set the device's PM runtime status to suspended on sub-device registration failure (missed in v1).
Sakari Ailus (4):
media: ov05c10: Small cleanups
media: ov05c10: Set reset GPIO high when acquiring it
media: ov05c10: Power management fixes
media: ov05c10: Remove duplicated writes to analogue gain register
drivers/media/i2c/ov05c10.c | 55 ++++++++++++++++--------------------- 1 file changed, 24 insertions(+), 31 deletions(-)
Signature · 1 line
2.47.3
Sakari Ailus
maintainerPATCH v2 1/4 media: ov05c10: Small cleanups
- Use dev_err_probe() instead of dev_err() in probe() path
- Don't set event handlers just for controls
- Don't set HAS_DEVNODE sub-device flag
- Coding style improvements
- Use container_of_const()
--- drivers/media/i2c/ov05c10.c | 46 +++++++++++++++---------------------- 1 file changed, 18 insertions(+), 28 deletions(-)
drivers/media/i2c/ov05c10.c +18 -28
@@ -108,7 +108,7 @@ static const struct regmap_config ov05c10_regmap_config = { .disable_locking = true, }; -#define to_ov05c10 (_sd) container_of(_sd, struct ov05c10, sd) +#define to_ov05c10 (_sd) container_of_const(_sd, struct ov05c10, sd)static const char *const ov05c10_test_pattern_menu[] = {"Disabled" ,
@@ -320,7 +320,7 @@ static int ov05c10_test_pattern(struct ov05c10 *ov05c10, u32 pattern)static int ov05c10_set_ctrl (struct v4l2_ctrl *ctrl) {struct ov05c10 *ov05c10 = - container_of(ctrl->handler, struct ov05c10, ctrl_handler); + container_of_const(ctrl->handler, struct ov05c10, ctrl_handler);struct i2c_client *client =v4l2_get_subdevdata (&ov05c10->sd);struct v4l2_subdev_state *state;const struct v4l2_mbus_framefmt *format;
@@ -439,6 +439,7 @@ static int ov05c10_init_controls(struct ov05c10 *ov05c10)OV05C10_MIN_ANALOG_GAIN ,OV05C10_MAX_ANALOG_GAIN ,OV05C10_ANALOG_GAIN_STEP , OV05C10_ANALOG_GAIN_DEFAULT); +v4l2_ctrl_new_std (ctrl_hdlr, &ov05c10_ctrl_ops,V4L2_CID_DIGITAL_GAIN ,OV05C10_MIN_DIG_GAIN ,OV05C10_MAX_DIG_GAIN ,OV05C10_DGTL_GAIN_STEP ,OV05C10_DGTL_GAIN_DEFAULT );
@@ -693,13 +694,7 @@ static const struct v4l2_subdev_pad_ops ov05c10_pad_ops = { .disable_streams = ov05c10_disable_streams, }; -static const struct v4l2_subdev_core_ops ov05c10_core_ops = { - .subscribe_event = v4l2_ctrl_subdev_subscribe_event, - .unsubscribe_event = v4l2_event_subdev_unsubscribe, -}; -static const struct v4l2_subdev_ops ov05c10_subdev_ops = { - .core = &ov05c10_core_ops, .pad = &ov05c10_pad_ops, };
@@ -720,7 +715,7 @@ static int ov05c10_parse_fwnode(struct ov05c10 *ov05c10, struct device *dev) ret =v4l2_fwnode_endpoint_alloc_parse (endpoint, &bus_cfg);fwnode_handle_put (endpoint);if (ret) { -dev_err (dev,"parsing endpoint node failed\n" ); +dev_err_probe (dev, ret,"parsing endpoint node failed\n" ); goto out_err; }
@@ -743,16 +738,13 @@ static int ov05c10_identify_module(struct ov05c10 *ov05c10)int ret =0 ;cci_read (ov05c10->regmap,OV05C10_REG_CHIP_ID , &val, &ret); -if (ret) { -dev_err (&client->dev,"chip id read err" ); -return ret; - } +if (ret) +return dev_err_probe (&client->dev, ret,"chip id read err" ); -if (val !=OV05C10_CHIP_ID ) { -dev_err (&client->dev,"chip id mismatch: %x!=%llu" , -OV05C10_CHIP_ID , val); -return -ENXIO ; - } +if (val !=OV05C10_CHIP_ID ) +return dev_err_probe (&client->dev, ret, +"chip id mismatch: %x!=%llu" , +OV05C10_CHIP_ID , val);return 0 ; }
@@ -871,35 +863,33 @@ static int ov05c10_probe(struct i2c_client *client) full_power =acpi_dev_state_d0 (dev);if (full_power) { ret =ov05c10_power_on (dev); -if (ret) { -dev_err (&client->dev,"failed to power on\n" ); +if (ret)return ret; - } } ret =ov05c10_init_controls (ov05c10);if (ret) { -dev_err (&client->dev,"failed to init controls: %d" , ret); +dev_err_probe (&client->dev, ret,"failed to init controls\n" ); goto probe_error_power_off; } ov05c10->sd.internal_ops = &ov05c10_internal_ops; - ov05c10->sd.flags |=V4L2_SUBDEV_FL_HAS_DEVNODE | -V4L2_SUBDEV_FL_HAS_EVENTS ; + ov05c10->sd.flags |=V4L2_SUBDEV_FL_HAS_DEVNODE ; ov05c10->sd.entity.ops =NULL ; ov05c10->sd.entity.function =MEDIA_ENT_F_CAM_SENSOR ; ov05c10->pad.flags =MEDIA_PAD_FL_SOURCE ; ret =media_entity_pads_init (&ov05c10->sd.entity,1 , &ov05c10->pad);if (ret) { -dev_err (&client->dev,"failed to init entity pads: %d" , ret); +dev_err_probe (&client->dev, ret, +"failed to init entity pads\n" ); goto probe_error_v4l2_ctrl_handler_free; } ov05c10->sd.state_lock = ov05c10->ctrl_handler.lock; ret =v4l2_subdev_init_finalize (&ov05c10->sd);if (ret <0 ) { -dev_err (dev,"v4l2 subdev init error: %d\n" , ret); +dev_err_probe (dev, ret,"v4l2 subdev init error\n" ); goto probe_error_media_entity_cleanup; }
@@ -909,8 +899,8 @@ static int ov05c10_probe(struct i2c_client *client) ret =v4l2_async_register_subdev_sensor (&ov05c10->sd);if (ret <0 ) { -dev_err (&client->dev,"failed to register V4L2 subdev: %d" , - ret); +dev_err_probe (&client->dev, ret, +"failed to register V4L2 subdev" ); goto probe_error_rpm; }pm_runtime_set_autosuspend_delay (&client->dev,1000 );
Signature · 1 line
2.47.3
Sakari Ailus
maintainerPATCH v2 2/4 media: ov05c10: Set reset GPIO high when acquiring it
In reply to Sakari AilusSet the reset GPIO high when it is acquired.
--- drivers/media/i2c/ov05c10.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/i2c/ov05c10.c +1 -1
@@ -765,7 +765,7 @@ static int ov05c10_get_pm_resources(struct device *dev)return dev_err_probe (dev,PTR_ERR (ov05c10->avdd),"failed to get avdd regulator\n" ); - ov05c10->reset =devm_gpiod_get_optional (dev,"reset" ,GPIOD_OUT_LOW ); + ov05c10->reset =devm_gpiod_get_optional (dev,"reset" ,GPIOD_OUT_HIGH );if (IS_ERR (ov05c10->reset))return dev_err_probe (dev,PTR_ERR (ov05c10->reset),"failed to get reset gpio\n" );
Signature · 1 line
2.47.3
Sakari Ailus
maintainerPATCH v2 3/4 media: ov05c10: Power management fixes
In reply to Sakari AilusIf the device wasn't powered on in probe(), probe failure led to it still being powered off. Also the device's PM runtime status was left active when sub-device registration failed and autosuspend was left enabled after unbind. Fix all three issues.
--- drivers/media/i2c/ov05c10.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/media/i2c/ov05c10.c +5 -1
@@ -910,6 +910,8 @@ static int ov05c10_probe(struct i2c_client *client)return 0 ; probe_error_rpm: +if (full_power) +pm_runtime_set_suspended (&client->dev);pm_runtime_disable (&client->dev);v4l2_subdev_cleanup (&ov05c10->sd);
@@ -920,7 +922,8 @@ static int ov05c10_probe(struct i2c_client *client)v4l2_ctrl_handler_free (ov05c10->sd.ctrl_handler); probe_error_power_off: -ov05c10_power_off (&client->dev); +if (full_power) +ov05c10_power_off (&client->dev);return ret; }
@@ -934,6 +937,7 @@ static void ov05c10_remove(struct i2c_client *client)v4l2_subdev_cleanup (sd);media_entity_cleanup (&ov05c10->sd.entity);v4l2_ctrl_handler_free (&ov05c10->ctrl_handler); +pm_runtime_dont_use_autosuspend (&client->dev);pm_runtime_disable (&client->dev);if (!pm_runtime_status_suspended (&client->dev)) {
Signature · 1 line
2.47.3
Sakari Ailus
maintainerPATCH v2 4/4 media: ov05c10: Remove duplicated writes to analogue gain register
In reply to Sakari AilusRemove duplicated writes to analogue gain (P1:0x24) register from the mode register list.
--- drivers/media/i2c/ov05c10.c | 1 - 1 file changed, 1 deletion(-)
drivers/media/i2c/ov05c10.c +0 -1
@@ -158,7 +158,6 @@ static const struct cci_reg_sequence mode_2800_1576_30fps[] = { { OV05C10_REG8(0x01, 0x06), 0x76 }, { OV05C10_REG8(0x01, 0x07), 0x08 }, { OV05C10_REG8(0x01, 0x1b), 0x01 }, - { OV05C10_REG8(0x01, 0x24), 0xff }, { OV05C10_REG8(0x01, 0x42), 0x5d }, { OV05C10_REG8(0x01, 0x43), 0x08 }, { OV05C10_REG8(0x01, 0x44), 0x81 },
Signature · 1 line
2.47.3