shared/asha: prime volume before starting audio
Subsystems (2)
PATCH 1/1 shared/asha: prime volume before starting audio
Some tested renderers remain silent unless the Volume characteristic is written before START. Prime it with the selected volume and keep the write best effort.
Test volume-before-START ordering and best-effort failure handling.
---
Submission review notes (not part of the commit message):
Local validation is for base 7428ca2df9356363079db0f48412c20cbdb9471f. Compatibility with newer upstream tips has not been verified locally. N8 startup evidence is from the combined downstream stack, not a volume-only hardware ablation. Native ordering/failure unit tests are included; other renderer coverage and human contribution review remain.
.gitignore | 1 + Makefile.am | 6 +++ src/shared/asha.c | 4 ++ unit/test-asha-start.c | 99 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 110 insertions(+) create mode 100644 unit/test-asha-start.c
.gitignore +1 -0
@@ -112,6 +112,7 @@ unit/test-lib unit/test-mgmt unit/test-uhid unit/test-hfp +unit/test-asha-start unit/test-crypto unit/test-ecc unit/test-hog
Makefile.am +6 -0
@@ -706,6 +706,12 @@ unit_test_avrcp_LDADD = lib/libbluetooth-internal.la \ unit_tests += unit/test-hfp +unit_tests += unit/test-asha-start + +unit_test_asha_start_SOURCES = unit/test-asha-start.c +unit_test_asha_start_LDADD = src/libshared-glib.la \ + lib/libbluetooth-internal.la $(GLIB_LIBS) + unit_test_hfp_SOURCES = unit/test-hfp.c unit_test_hfp_LDADD = src/libshared-glib.la $(GLIB_LIBS)
src/shared/asha.c +4 -0
@@ -262,6 +262,10 @@ unsigned int bt_asha_start(struct bt_asha *asha, bt_asha_cb_t cb,return 0 ; } +/* Some renderers require a Volume write before START. */ +if (!bt_asha_set_volume (asha, asha->volume)) +DBG ("ASHA volume priming failed, continuing with START" ); + ret =asha_send_acp (asha, acp_start_cmd,sizeof (acp_start_cmd), cb, user_data);if (ret <0 )
unit/test-asha-start.c new file +99 -0
99 lines not on this page · raw message
base-commit: 7428ca2df9356363079db0f48412c20cbdb9471f
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/series/1184354/
---Test result---
Test Summary:
CheckPatch PASS 0.47 seconds GitLint PASS 0.27 seconds BuildEll PASS 19.44 seconds BluezMake PASS 291.44 seconds MakeCheck PASS 14.18 seconds MakeDistcheck PASS 145.25 seconds CheckValgrind PASS 231.58 seconds CheckSmatch PASS 290.49 seconds bluezmakeextell PASS 93.58 seconds TestFunctional FAIL 1198.04 seconds IncrementalBuild PASS 293.18 seconds ScanBuild PASS 1131.33 seconds
Details
##############################
Test: TestFunctional - FAIL
Desc: Run test-functional
Output:
FAIL functional.test_bluetoothctl::test_bluetoothctl_pair_bredr[hosts15-vm2]: pytest_bluezenv.rpc.RemoteError: <pexpect.popen_spawn.PopenSpawn object at 0x7f9674e9e510>
searcher: searcher_re:
0: re.compile(b'Changing pairable on succeeded')
<pexpect.popen_spawn.PopenSpawn object at 0x7f9674e9e510>
searcher: searcher_re:
0: re.compile(b'Changing pairable on succeeded')
Remote traceback:
Traceback (most recent call last):
File "/usr/local/lib/python3.14/dist-packages/pytest_bluezenv/../pytest_bluezenv/rpc.py", line 102, in server_stream
result = method(*msg["a"], **msg["kw"])
File "/usr/local/lib/python3.14/dist-packages/pytest_bluezenv/../pytest_bluezenv/env.py", line 256, in call_plugin
return getattr(self.plugins[name], method)(*a, **kw)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^
File "/usr/local/lib/python3.14/dist-packages/pytest_bluezenv/../pytest_bluezenv/host_plugins.py", line 502, in expect
ret = self.ctl.expect(*a, **kw)
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 354, in expect
return self.expect_list(compiled_pattern_list,
~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^
timeout, searchwindowsize, async_)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 383, in expect_list
return exp.expect_loop(timeout)
~~~~~~~~~~~~~~~^^^^^^^^^
File "/usr/lib/python3/dist-packages/pexpect/expect.py", line 181, in expect_loop
return self.timeout(e)
~~~~~~~~~~~~^^^
File "/usr/lib/python3/dist-packages/pexpect/expect.py", line 144, in timeout
raise exc
pexpect.exceptions.TIMEOUT: <pexpect.popen_spawn.PopenSpawn object at 0x7f9674e9e510>
searcher: searcher_re:
0: re.compile(b'Changing pairable on succeeded')
<pexpect.popen_spawn.PopenSpawn object at 0x7f9674e9e510>
searcher: searcher_re:
0: re.compile(b'Changing pairable on succeeded')
FAIL functional.test_hog::test_hog[sci-hosts18-vm2]: pytest_bluezenv.rpc.RemoteTimeoutError: Connection recv timed out
https://github.com/bluez/bluez/pull/2665
---
Regards,
Linux Bluetooth
Could the failed TestFunctional CI check for this patch be reran? The matching checks pass locally.
CI: https://github.com/bluez/bluez/pull/2665
Quoted 174 lines · Kyle Pepper
Some tested renderers remain silent unless the Volume characteristic is written before START. Prime it with the selected volume and keep the write best effort.
Test volume-before-START ordering and best-effort failure handling.
Assisted-by OpenCode:gpt-6.1-sol---
Submission review notes (not part of the commit message):
Local validation is for base7428ca2df9356363079db0f48412c20cbdb9471f. Compatibility with newer upstream tips has not been verified locally. N8 startup evidence is from the combined downstream stack, not a volume-only hardware ablation. Native ordering/failure unit tests are included; other renderer coverage and human contribution review remain..gitignore | 1 + Makefile.am | 6 +++ src/shared/asha.c | 4 ++ unit/test-asha-start.c | 99 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 110 insertions(+) create mode 100644 unit/test-asha-start.c.gitignore +1
-0@@ -112,6 +112,7 @@ unit/test-lib unit/test-mgmt unit/test-uhid unit/test-hfp +unit/test-asha-start unit/test-crypto unit/test-ecc unit/test-hogMakefile.am +6
-0@@ -706,6 +706,12 @@ unit_test_avrcp_LDADD = lib/libbluetooth-internal.la \ unit_tests += unit/test-hfp +unit_tests += unit/test-asha-start + +unit_test_asha_start_SOURCES = unit/test-asha-start.c +unit_test_asha_start_LDADD = src/libshared-glib.la \ + lib/libbluetooth-internal.la $(GLIB_LIBS) + unit_test_hfp_SOURCES = unit/test-hfp.c unit_test_hfp_LDADD = src/libshared-glib.la $(GLIB_LIBS)src/shared/asha.c +4
-0@@ -262,6 +262,10 @@ unsigned int bt_asha_start(struct bt_asha *asha, bt_asha_cb_t cb,return 0 ; } +/* Some renderers require a Volume write before START. */ +if (!bt_asha_set_volume (asha, asha->volume)) +DBG ("ASHA volume priming failed, continuing with START" ); + ret =asha_send_acp (asha, acp_start_cmd,sizeof (acp_start_cmd), cb, user_data);if (ret <0 )unit/test-asha-start.c new file +99
-0@@ -0,0 +1,99 @@ +// SPDX-License-Identifier: LGPL-2.1-or-later +#include <assert.h> + +/* Source-level mocks remain effective with link-time optimization. */ +#define bt_gatt_client_write_without_response test_write_command +#define bt_gatt_client_write_value test_write_request +#include "src/shared/asha.c" +#undef bt_gatt_client_write_without_response +#undef bt_gatt_client_write_value +#include "src/shared/tester.h" + +static unsigned int commands, requests; +static bool volume_ok, start_ok; +static int8_t selected_volume; + +void btd_error (uint16_t index,const char *format, ...) +{ +} + +void btd_debug (uint16_t index,const char *format, ...) +{ +} + +unsigned int test_write_command (struct bt_gatt_client *client,uint16_t handle, +bool signed_write, +const uint8_t *value,uint16_t length) +{ +assert (client && handle ==0x82 && !signed_write); +assert (length ==1 && (int8_t ) value[0 ] == selected_volume); +assert (requests ==0 ); + commands++; +return volume_ok; +} + +unsigned int test_write_request (struct bt_gatt_client *client,uint16_t handle, +const uint8_t *value,uint16_t length, +bt_gatt_client_callback_t callback,void *data, +bt_gatt_client_destroy_func_t destroy) +{ +assert (client && handle ==0x79 ); +assert (commands ==1 && requests ==0 ); +assert (length ==5 && value[0 ] ==0x01 && value[1 ] ==0x01 ); +assert ((int8_t ) value[3 ] == selected_volume); +assert (callback && data && !destroy); + requests++; +return start_ok; +} + +static void test_start (const void *user_data) +{ +const int8_t volumes[] = {-128 ,-127 ,-64 ,0 }; +unsigned int i, fail; + +for (i =0 ; i <ARRAY_SIZE (volumes); i++) { +for (fail =0 ; fail <2 ; fail++) { +struct bt_asha asha = { + .client = (void *)1 , .acp_handle =0x79 , + .volume_handle =0x82 , .volume = volumes[i], + }; + + selected_volume = volumes[i]; + commands = requests =0 ; + volume_ok = !fail; + start_ok = true; +assert (bt_asha_start (&asha,NULL ,NULL ) ==0 ); +assert (commands ==1 && requests ==1 ); +assert (asha.state ==ASHA_STARTING ); +assert (asha.volume == selected_volume); + +/* A repeated start must not write the volume again. */ +bt_asha_start (&asha,NULL ,NULL ); +assert (commands ==1 && requests ==1 ); + } + } + + { +struct bt_asha asha = { + .client = (void *)1 , .acp_handle =0x79 , + .volume_handle =0x82 , .volume =-64 , + }; + + commands = requests =0 ; + selected_volume = asha.volume; + volume_ok = true; + start_ok = false; +assert (bt_asha_start (&asha,NULL ,NULL ) == (unsigned int )-1 ); +assert (asha.state ==ASHA_STOPPED ); +assert (commands ==1 && requests ==1 ); + } + +tester_test_passed (); +} + +int main (int argc,char *argv[]) +{ +tester_init (&argc, &argv); +tester_add ("ASHA/start/volume" ,NULL ,NULL , test_start,NULL ); +return tester_run (); +}base-commit:
7428ca2df9356363079db0f48412c20cbdb9471f
This is an automated email and please do not reply to this email.
Dear Submitter,
This series was picked up by the CI more than 2 weeks ago and the pull request created for it is still open, which means the series was never applied to the tree.
Series: shared/asha: prime volume before starting audio
Pull Request: https://github.com/bluez/bluez/pull/2665
Created: 2026-10-13 04:00:16+00:00
The pull request has been closed and no further action is taken on this series.
If the change should still be considered, it must be resent to the Linux Bluetooth mailing list ([email protected]) so that it is picked up again.
---
Regards,
Linux Bluetooth