nvme-pci: force simple suspend on Inspur NF50
PATCH 1/1 nvme-pci: force simple suspend on Inspur NF50
The Inspur CP300F3 / NF50 platform loses the PCIe link across S3 and NVMe resume fails. Force the simple suspend path for this board.
Signed-off-by Kun An <[email protected]>
--- drivers/nvme/host/pci.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/nvme/host/pci.c +14 -0
@@ -3664,6 +3664,20 @@ static unsigned long check_vendor_combination_bug(struct pci_dev *pdev)return NVME_QUIRK_FORCE_NO_SIMPLE_SUSPEND ; } +/* +* On the Inspur CP300F3 / NF50 (Phytium) platform the SoC root complex +* does not keep the PCIe link alive across an S3 (deep) suspend, so an +* NVMe controller that the host-managed suspend path leaves in a +* non-operational power state never comes back after resume (I/O +* timeouts, reset failure, filesystem abort). The firmware does not +* advertise firmware-managed suspend and the failure reproduces with +* SSDs from different vendors, so key off the board instead of a +* specific device and always take the full shutdown path there. +*/ +if (dmi_match (DMI_BOARD_VENDOR ,"Inspur" ) && +dmi_match (DMI_BOARD_NAME ,"NF50" )) +return NVME_QUIRK_SIMPLE_SUSPEND ; +/* * NVMe SSD drops off the PCIe bus after system idle * for 10 hours on a Lenovo N60z board.
Signature · 1 line
2.20.1