gtp: ynl spec for the GTP netlink family, two fixes, and a selftest
Subsystems (5)
v7 cover gtp: ynl spec for the GTP netlink family, two fixes, and a selftest
This adds a ynl spec for the gtp genetlink family, two small driver fixes, and a selftest.
Patch 1: the GET and dump replies carried the family id in the command field, so ynl dropped them. Use GTP_CMD_GETPDP instead. Patch 2: new in v7. On the netdev CI debug kernel, the selftest hit an RCU warning: adding a PDP context looks up the device without the RCU read lock. Hold it around the lookup.
Patch 3: the spec (NEWPDP/DELPDP/GETPDP/ECHOREQ), no uapi change. Patch 4: a selftest that adds, dumps and deletes PDP contexts.
The multicast notifications are not in the spec: they reuse the request command values, which the ynl C generator can't express with the current uapi header.
v7:
- new patch 2: fix the RCU warning the selftest found on debug kernels
- selftest: add a docstring to GtpFamily (pylint)
- Cc Stanislav for lib/py
v6:
- spec: use the gtp_version uapi enum for the version attribute
- spec: family only applies to the MS address, fix its doc
- selftest: also skip on "Unknown device type", printed by iproute2 with extack support when the kernel has no gtp
v5:
- ynl: add CFLAGS_gtp so the generated code builds with older headers
- spec: doc fixes, min-len for the IPv6 attributes
- selftest: only skip when GTP is unavailable, close the ynl handle
v4:
- spec: request/reply attributes now match the handlers
- selftest: fix the gtp.ko autoload crash, check ENOENT, delete by TEI and by MS address
v6: https://lore.kernel.org/netdev/[email protected]/
v5: https://lore.kernel.org/netdev/[email protected]/
v4: https://lore.kernel.org/netdev/[email protected]/
v3: https://lore.kernel.org/netdev/[email protected]/
v2: https://lore.kernel.org/netdev/[email protected]/
Anil Kaushik (4):
gtp: set a valid genl command in PDP context get and dump replies
gtp: hold RCU for the device lookup when adding a PDP context
netlink: specs: add genetlink-legacy spec for GTP
selftests: net: add a test for the gtp netlink family
Documentation/netlink/specs/gtp.yaml | 196 ++++++++++++++++++ MAINTAINERS | 2 + drivers/net/gtp.c | 7 +- tools/net/ynl/Makefile.deps | 1 + tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/gtp.py | 123 +++++++++++ .../testing/selftests/net/lib/py/__init__.py | 5 +- tools/testing/selftests/net/lib/py/ynl.py | 9 +- 9 files changed, 340 insertions(+), 5 deletions(-) create mode 100644 Documentation/netlink/specs/gtp.yaml create mode 100755 tools/testing/selftests/net/gtp.py
Signature · 1 line
2.25.1
PATCH v7 1/4 gtp: set a valid genl command in PDP context get and dump replies
gtp_genl_fill_info() stamps the reply with the command its callers pass in. gtp_genl_get_pdp() and gtp_genl_dump_pdp() pass nlmsg_type, which in a genl message is the dynamically assigned family id rather than a GTP_CMD_* value, so replies to a PDP context get or dump carry a meaningless command number.
libgtpnl ignores the command and is unaffected, but parsers that check it (for example the ynl tooling) treat the reply as an unknown command and discard it. Pass GTP_CMD_GETPDP, as gtp_tunnel_notify() already passes a real command on the notification path. No uapi change.
--- drivers/net/gtp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/gtp.c +2 -2
@@ -2279,7 +2279,7 @@ static int gtp_genl_get_pdp(struct sk_buff *skb, struct genl_info *info) } err =gtp_genl_fill_info (skb2,NETLINK_CB (skb).portid, info->snd_seq, -0 , info->nlhdr->nlmsg_type, pctx); +0 ,GTP_CMD_GETPDP , pctx);if (err <0 ) goto err_unlock_free;
@@ -2326,7 +2326,7 @@ static int gtp_genl_dump_pdp(struct sk_buff *skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, NLM_F_MULTI, - cb->nlh->nlmsg_type, pctx)) { + GTP_CMD_GETPDP, pctx)) { cb->args[0 ] = i; cb->args[1 ] = j; cb->args[2 ] = (unsigned long )gtp;
Signature · 1 line
2.25.1
PATCH v7 2/4 gtp: hold RCU for the device lookup when adding a PDP context
In reply to Anil Kaushikgtp_genl_new_pdp() calls gtp_find_dev(), which looks the device up with dev_get_by_index_rcu(). Since commit e2d1baca2b33 ("gtp: remove useless rcu_read_lock()"), this only runs under the rtnl lock, and kernels with CONFIG_PROVE_RCU_LIST warn:
WARNING: suspicious RCU usage
net/core/dev.c:1047 RCU-list traversed in non-reader section!!
...
dev_get_by_index_rcu
gtp_find_dev
gtp_genl_new_pdp
Hold the RCU read lock around the lookup only: gtp_pdp_add() allocates with GFP_KERNEL, and the rtnl lock keeps the device alive afterwards.
Found with the gtp selftest on a debug kernel.
--- drivers/net/gtp.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/net/gtp.c +3 -0
@@ -2050,7 +2050,10 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)rtnl_lock (); +/* the rtnl lock keeps the device alive once found */ +rcu_read_lock (); gtp =gtp_find_dev (sock_net (skb->sk), info->attrs); +rcu_read_unlock ();if (!gtp) { err = -ENODEV ; goto out_unlock;
Signature · 1 line
2.25.1
PATCH v7 3/4 netlink: specs: add genetlink-legacy spec for GTP
In reply to Anil KaushikThe GTP (GPRS Tunnelling Protocol, user plane) generic netlink family has no YAML specification under Documentation/netlink/specs/, so it cannot be consumed by the ynl tooling used for user-space clients, documentation and selftests.
Add a genetlink-legacy spec describing the existing family: the PDP context management commands (NEWPDP, DELPDP, GETPDP) and the GTP-U echo request (ECHOREQ), the GTPA_* attribute set, and the "gtp" multicast group. Command and attribute values are taken from include/uapi/linux/gtp.h and match it one-to-one. The request attributes of each command are the ones its handler in drivers/net/gtp.c reads, and the reply attributes the ones gtp_genl_fill_info() emits.
The notifications sent on the "gtp" group are not described: they reuse the command values of the NEWPDP, DELPDP and ECHOREQ requests, which the ynl code generator cannot express with the existing uapi header. The family doc says so.
Add the matching CFLAGS_gtp entry to tools/net/ynl/Makefile.deps, so the generated code is built against the tree's gtp.h instead of an older one installed on the host.
This only adds the description; there is no kernel code or uapi change.
--- Documentation/netlink/specs/gtp.yaml | 196 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tools/net/ynl/Makefile.deps | 1 + 3 files changed, 198 insertions(+) create mode 100644 Documentation/netlink/specs/gtp.yaml
Documentation/netlink/specs/gtp.yaml new file +196 -0
@@ -0,0 +1,196 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) +--- +name: gtp + +protocol: genetlink-legacy + +doc: | + GPRS Tunnelling Protocol, user plane (GTP-U). + + The gtp netdevice encapsulates and decapsulates user plane packets in + GTP-U tunnels (GTPv0 and GTPv1-U, see 3GPP TS 29.060 and TS 29.281). + This family manages the PDP contexts that describe the tunnels and + triggers GTP-U echo requests. It is driven by user space control planes + such as those built on libgtpnl. + + The kernel registers the family with version 0, which the + genetlink-legacy schema cannot express. + + The notifications multicast on the "gtp" group are not described: PDP + context additions and deletions, and GTP-U echo responses, reuse the + NEWPDP, DELPDP and ECHOREQ command values of the requests. + +kernel-policy: global + +definitions: + - + type: enum + name: version + name-prefix: gtp- + enum-name: gtp-version + header: linux/gtp.h + entries: [v0, v1] + +attribute-sets: + - + name: gtp + name-prefix: gtpa- + attributes: + - + name: link + type: u32 + doc: ifindex of the gtp netdevice the context is attached to. + - + name: version + type: u32 + enum: version + doc: GTP version of the context, GTPv0 or GTPv1-U. + - + name: tid + type: u64 + doc: Tunnel identifier, GTPv0 only. + - + name: peer-address + type: u32 + byte-order: big-endian + display-hint: ipv4 + doc: | + IPv4 address of the remote GSN peer (GGSN or SGSN). Also known + as GTPA_SGSN_ADDRESS, kept for legacy user space. + - + name: ms-address + type: u32 + byte-order: big-endian + display-hint: ipv4 + doc: IPv4 address of the mobile subscriber served by the context. + - + name: flow + type: u16 + doc: Flow label, GTPv0 only. + - + name: net-ns-fd + type: u32 + doc: File descriptor of the network namespace of the gtp netdevice. + - + name: i-tei + type: u32 + doc: Ingress Tunnel Endpoint Identifier, GTPv1-U only. + - + name: o-tei + type: u32 + doc: Egress Tunnel Endpoint Identifier, GTPv1-U only. + - + name: pad + type: pad + - + name: peer-addr6 + type: binary + checks: + min-len: 16 + byte-order: big-endian + display-hint: ipv6 + doc: IPv6 address of the remote GSN peer (GGSN or SGSN). + - + name: ms-addr6 + type: binary + checks: + min-len: 16 + byte-order: big-endian + display-hint: ipv6 + doc: | + IPv6 prefix of the mobile subscriber served by the context: a /64 + prefix, with the lower 64 bits set to zero. + - + name: family + type: u8 + doc: | + Address family (AF_INET or AF_INET6) of ms-address or ms-addr6, + AF_INET when absent. The peer address uses the family of the + tunnel socket. + +operations: + list: + - + name: newpdp + doc: Create or update a PDP context. + attribute-set: gtp + value: 0 + dont-validate: [strict, dump] + flags: [admin-perm] + do: + request: &pdp-attrs + attributes: + - link + - version + - tid + - peer-address + - peer-addr6 + - ms-address + - ms-addr6 + - flow + - i-tei + - o-tei + - family + - net-ns-fd + - + name: delpdp + doc: Delete a PDP context. + attribute-set: gtp + dont-validate: [strict, dump] + flags: [admin-perm] + do: + request: &pdp-find + attributes: + - link + - version + - tid + - ms-address + - ms-addr6 + - i-tei + - family + - net-ns-fd + - + name: getpdp + doc: Get or dump one or more PDP contexts. + attribute-set: gtp + dont-validate: [strict, dump] + flags: [admin-perm] + do: + request: *pdp-find + reply: &pdp-reply + attributes: + - link + - version + - tid + - peer-address + - peer-addr6 + - ms-address + - ms-addr6 + - flow + - i-tei + - o-tei + - family + dump: + reply: *pdp-reply + - + name: echoreq + doc: | + Send a GTP-U echo request to a peer. ms-address is not a mobile + subscriber address here, but the local IPv4 address used as source + of the request. + attribute-set: gtp + dont-validate: [strict, dump] + flags: [admin-perm] + do: + request: + attributes: + - link + - version + - peer-address + - ms-address + - net-ns-fd + +mcast-groups: + list: + - + name: gtp
MAINTAINERS +1 -0
@@ -11422,6 +11422,7 @@ M: Harald Welte <[email protected]> L: [email protected] S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/gtp.git +F: Documentation/netlink/specs/gtp.yaml F: drivers/net/gtp.c GUID PARTITION TABLE (GPT)
tools/net/ynl/Makefile.deps +1 -0
@@ -24,6 +24,7 @@ CFLAGS_ethtool:=$(call get_hdr_inc,_LINUX_TYPELIMITS_H,typelimits.h) \ $(call get_hdr_inc,_LINUX_ETHTOOL_H,ethtool.h) \ $(call get_hdr_inc,_LINUX_ETHTOOL_NETLINK_H_,ethtool_netlink.h) \ $(call get_hdr_inc,_LINUX_ETHTOOL_NETLINK_GENERATED_H,ethtool_netlink_generated.h) +CFLAGS_gtp:=$(call get_hdr_inc,_LINUX_GTP_H_,gtp.h) CFLAGS_handshake:=$(call get_hdr_inc,_LINUX_HANDSHAKE_H,handshake.h) CFLAGS_lockd_netlink:=$(call get_hdr_inc,_LINUX_LOCKD_NETLINK_H,lockd_netlink.h) CFLAGS_mptcp_pm:=$(call get_hdr_inc,_LINUX_MPTCP_PM_H,mptcp_pm.h)
Signature · 1 line
2.25.1
PATCH v7 4/4 selftests: net: add a test for the gtp netlink family
In reply to Anil KaushikExercise the gtp generic netlink family through its ynl spec: create a gtp device, add a PDP context with newpdp, check getpdp dumps it on that device with the expected TEIDs and addresses, and that delpdp by TEI removes it. Two more cases check that two contexts are dumped and one can be deleted by its MS address, and that deleting an unknown context fails with ENOENT, both by TEI and by MS address.
ynl resolves the family ids once per process, with a CTRL_CMD_GETFAMILY dump which does not autoload modules, so the gtp device is created before the family handle: that loads gtp.ko through its rtnl link alias. The test is skipped when the kernel or iproute2 lack GTP support; any other failure to create the device fails it.
Add a GtpFamily ynl wrapper and register the test.
--- MAINTAINERS | 1 + tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/gtp.py | 123 ++++++++++++++++++ .../testing/selftests/net/lib/py/__init__.py | 5 +- tools/testing/selftests/net/lib/py/ynl.py | 9 +- 6 files changed, 137 insertions(+), 3 deletions(-) create mode 100755 tools/testing/selftests/net/gtp.py
MAINTAINERS +1 -0
@@ -11424,6 +11424,7 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/pablo/gtp.git F: Documentation/netlink/specs/gtp.yaml F: drivers/net/gtp.c +F: tools/testing/selftests/net/gtp.py GUID PARTITION TABLE (GPT) M: Davidlohr Bueso <[email protected]>
tools/testing/selftests/net/Makefile +1 -0
@@ -46,6 +46,7 @@ TEST_PROGS := \ fq_band_pktlimit.sh \ gre_gso.sh \ gre_ipv6_lladdr.sh \ + gtp.py \ icmp.sh \ icmp_redirect.sh \ io_uring_zerocopy_tx.sh \
tools/testing/selftests/net/config +1 -0
@@ -16,6 +16,7 @@ CONFIG_DEBUG_INFO_BTF=y CONFIG_DEBUG_INFO_BTF_MODULES=n CONFIG_DUMMY=y CONFIG_GENEVE=m +CONFIG_GTP=m CONFIG_IFB=y CONFIG_INET_DIAG=y CONFIG_INET_ESP=y
tools/testing/selftests/net/gtp.py new file +123 -0
123 lines not on this page · raw message
tools/testing/selftests/net/lib/py/__init__.py +3 -2
@@ -18,7 +18,7 @@ from .utils import CmdExitFailure, fd_read_timeout, cmd, bkg, defer, \ from .bpf import bpf_map_set, bpf_map_dump, bpf_prog_map_ids from .ynl import NlError, NlctrlFamily, YnlFamily, \ EthtoolFamily, NetdevFamily, RtnlFamily, RtnlAddrFamily, RtnlRouteFamily -from .ynl import NetshaperFamily, DevlinkFamily, PSPFamily, Netlink +from .ynl import NetshaperFamily, DevlinkFamily, GtpFamily, PSPFamily, Netlink __all__ = ["KSRC", "KsftFailEx", "KsftSkipEx", "KsftXfailEx", "ksft_pr", "ksft_eq",
@@ -32,6 +32,7 @@ __all__ = ["KSRC", "wait_port_listen", "ctl_file_write", "wait_file", "tool", "tc", "bpf_map_set", "bpf_map_dump", "bpf_prog_map_ids", "NetdevSim", "NetdevSimDev", - "NetshaperFamily", "DevlinkFamily", "PSPFamily", "NlError", + "NetshaperFamily", "DevlinkFamily", "GtpFamily", "PSPFamily", + "NlError", "YnlFamily", "EthtoolFamily", "NetdevFamily", "RtnlFamily", "NlctrlFamily", "RtnlAddrFamily", "RtnlRouteFamily", "Netlink"]
tools/testing/selftests/net/lib/py/ynl.py +8 -1
@@ -31,7 +31,7 @@ __all__ = [ "NlError", "NlPolicy", "Netlink", "YnlFamily", "SPEC_PATH", "EthtoolFamily", "RtnlFamily", "RtnlAddrFamily", "RtnlRouteFamily", "NetdevFamily", "NetshaperFamily", "NlctrlFamily", "DevlinkFamily", - "PSPFamily", + "GtpFamily", "PSPFamily", ] #
@@ -85,3 +85,10 @@ class PSPFamily(YnlFamily): def __init__(self, recv_size=0): super().__init__((SPEC_PATH / Path('psp.yaml')).as_posix(), schema='', recv_size=recv_size) + + +class GtpFamily(YnlFamily): + """YNL family for gtp, see Documentation/netlink/specs/gtp.yaml.""" + def __init__(self, recv_size=0): + super().__init__((SPEC_PATH / Path('gtp.yaml')).as_posix(), + schema='', recv_size=recv_size)
Signature · 1 line
2.25.1
This series was applied to netdev/net-next.git (main) by Paolo Abeni <[email protected]>:
Hello:
This series was applied to netdev/net-next.git (main) by Paolo Abeni <[email protected]>:
Quoted 11 lines · On Fri, 16 Oct 2026 09:32:21 +0000 you wrote:
This adds a ynl spec for the gtp genetlink family, two small driver fixes, and a selftest.
Patch 1: the GET and dump replies carried the family id in the command field, so ynl dropped them. Use
GTP_CMD_GETPDPinstead. Patch 2: new in v7. On the netdev CI debug kernel, the selftest hit an RCU warning: adding a PDP context looks up the device without the RCU read lock. Hold it around the lookup.
Patch 3: the spec (NEWPDP/DELPDP/GETPDP/ECHOREQ), no uapi change. Patch 4: a selftest that adds, dumps and deletes PDP contexts.
Quoted 1 line
[...]
Here is the summary with links:
- [net-next,v7,1/4] gtp: set a valid genl command in PDP context get and dump replies
https://git.kernel.org/netdev/net-next/c/758d8928d2c5 - [net-next,v7,2/4] gtp: hold RCU for the device lookup when adding a PDP context https://git.kernel.org/netdev/net-next/c/fe3e1a42fb7e - [net-next,v7,3/4] netlink: specs: add genetlink-legacy spec for GTP https://git.kernel.org/netdev/net-next/c/8a2f9964fc28 - [net-next,v7,4/4] selftests: net: add a test for the gtp netlink family https://git.kernel.org/netdev/net-next/c/ffb51f75013f
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html