ALSA: usb-audio: Rate-limit URB submission error at stream start
PATCH 1/1 ALSA: usb-audio: Rate-limit URB submission error at stream start
When two USB audio devices share a USB 2.0 hub (here a headset and a microphone), there may not be enough isochronous bandwidth to start the second stream, and usb_submit_urb() fails with -ENOSPC. PipeWire keeps retrying to start the stream every ~20 ms, and every attempt logs
usb 2-1.1: cannot submit urb 0, error -28: not enough bandwidth
On my desktop this was printed up to 94 times per second and flooded the kernel log.
Use usb_audio_err_ratelimited() for this message, as commit 2db2be5607c4 ("ALSA: usb-audio: Rate limit usb_set_interface error reporting") already did for a neighbouring message in the same file.
Tested on that desktop (X79, Linux 7.3) with the headset and the microphone on one hub, starting playback and capture on both for 20
seconds: the stock snd-usb-audio module printed the message 580 times, the patched one printed it 50 times and suppressed the rest.
--- sound/usb/endpoint.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
sound/usb/endpoint.c +3 -3
@@ -1642,9 +1642,9 @@ int snd_usb_endpoint_start(struct snd_usb_endpoint *ep) err = -ENODEV ;if (err <0 ) {if (!atomic_read (&ep->chip->shutdown)) -usb_audio_err (ep->chip, -"cannot submit urb %d, error %d: %s\n" , - i, err,usb_error_string (err)); +usb_audio_err_ratelimited (ep->chip, +"cannot submit urb %d, error %d: %s\n" , + i, err,usb_error_string (err)); goto __error; }set_bit (i, &ep->active_mask);
Signature · 1 line
2.56.0
Quoted 15 lines · Denis Kulikov
When two USB audio devices share a USB 2.0 hub (here a headset and a microphone), there may not be enough isochronous bandwidth to start the second stream, and
usb_submit_urb()fails with-ENOSPC. PipeWire keeps retrying to start the stream every ~20 ms, and every attempt logsusb 2-1.1: cannot submit urb 0, error -28: not enough bandwidth
On my desktop this was printed up to 94 times per second and flooded the kernel log.
Use
usb_audio_err_ratelimited()for this message, as commit2db2be5607c4("ALSA: usb-audio: Rate limitusb_set_interfaceerror reporting") already did for a neighbouring message in the same file.
Quoted 6 lines
Tested on that desktop (X79, Linux 7.3) with the headset and the microphone on one hub, starting playback and capture on both for 20
seconds: the stock snd-usb-audio module printed the message 580 times, the patched one printed it 50 times and suppressed the rest.Signed-off-by Denis Kulikov <[email protected]>
Applied now. Thanks.
Takashi