arm64: dts: rockchip: Add icm42607p IMU for RG-Vita-Pro
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: Add icm42607p IMU for RG-Vita-Pro
From: Chris Morgan <[email protected]>
Add the Invensense ICM42607P IMU for the Anbernic RG-DS. Mount-matrix was tested with iio-sensor-proxy and reports correct orientation. Orientation is relative to panel physical hardware which is rotated 270 degrees in software.
Signed-off-by Chris Morgan <[email protected]>
--- .../dts/rockchip/rk3576-anbernic-rg-vita-pro.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/rockchip/rk3576-anbernic-rg-vita-pro.dts +12 -1
@@ -819,7 +819,18 @@ regulator-state-mem { &i2c2 { status = "okay"; - /* inv,icm42607 IMU at 0x68 */ + /* + * Mount matrix relative to panel physical hardware which is + * rotated 270 degrees. + */ + + icm42607p: imu@68 { + compatible = "invensense,icm42607p"; + reg = <0x68>; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + }; }; &i2c3 {
Signature · 1 line
2.53.0
Quoted 4 lines · Chris Morgan
Add the Invensense ICM42607P IMU for the Anbernic RG-DS. Mount-matrix was tested with iio-sensor-proxy and reports correct orientation. Orientation is relative to panel physical hardware which is rotated 270 degrees in software.
Applied, thanks!
[1/1] arm64: dts: rockchip: Add icm42607p IMU for RG-Vita-Pro
commit: 4a17cc3bd48ecf4dcb7df2b26538e0d28e35d873
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>