Skip to contentSkip to conversation

openposix: Fix aio_suspend/1-1 completion race

PATCH In review Sebastian Chlad 2 participants 2 messages Oct 27

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 openposix: Fix aio_suspend/1-1 completion race

From: Andrea Cervesato <[email protected]>

Regular-file I/O can finish before the pending-request check, making this test depend on I/O speed and scheduling. Removing the check would weaken coverage of suspension while I/O is pending.

Use the existing AIO socket helpers and a coordinated draining thread to keep the selected write pending until the main thread sleeps. Retain the pending-request check and verify completion after aio_suspend() returns.

Assisted-by ClaudeCode:claude-opus-5-5

---
Andrea has left SUSE, so I'm picking this up and addressing the v2 review comments. The test logic is unchanged from v2.

Tested: 100 runs, plus 100 runs pinned to one CPU, all PASS.

Changes in v3:
- Restore the POSIX "assertion:" section and rename "Steps" to "method:", keeping the common Open POSIX header format (Petr, Martin).
- Add SUSE copyright for the rewrite (Petr).
- Link to v2:
https://lore.kernel.org/ltp/[email protected]/

 .../conformance/interfaces/aio_suspend/1-1.c  | 268 ++++++++----------
 1 file changed, 118 insertions(+), 150 deletions(-)
testcases/open_posix_testsuite/conformance/interfaces/aio_suspend/1-1.c +118 -150
index 8f0c9ae95..ec75c151d 100644
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2004, Bull SA. All rights reserved.
+ * Copyright (c) 2026 SUSE LLC
  * Created by:  [email protected]
  * This file is licensed under the GPL license.  For the full content
  * of this license, see the COPYING file at the top level of this
@@ -23,200 +24,167 @@
  *
  * method: Testing for a NULL timeout
  *
- *	- write to a file
- *	- submit a list of read requests
- *	- check that the selected request has not completed
- *	- suspend on selected request
- *	- check that the selected request has completed using aio_error and
- *	  aio_return
+ *	- queue enough asynchronous writes to fill a socket buffer
+ *	- check that the last write is still pending
+ *	- have a second thread wait for the main thread to sleep before
+ *	  draining the socket
+ *	- suspend on the last write
+ *	- check that the write has completed using aio_error and aio_return
  *
  */
 
-#include <sys/stat.h>
-#include <aio.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
+#include <pthread.h>
+#include <semaphore.h>
 #include <unistd.h>
 
 #include "posixtest.h"
-#include "tempfile.h"
+#include "aio_test.h"
+#include "proc.h"
 
 #define TNAME "aio_suspend/1-1.c"
+#define WRITE_COUNT 8
+#define WAIT_FOR_AIOCB (WRITE_COUNT - 1)
 
-#define NUM_AIOCBS	10
-#define BUF_SIZE	(1024*1024)
-#define WAIT_FOR_AIOCB	6
+/* Shared with the draining thread; result is read after pthread_join(). */
+static int fds[2];
+static struct aiocb aiocbs[WRITE_COUNT];
+static sem_t start;
+static int drain_result;
 
-static volatile int received_all;
-
-static void sigrt1_handler(int signum PTS_ATTRIBUTE_UNUSED,
-	siginfo_t *info PTS_ATTRIBUTE_UNUSED, void *context PTS_ATTRIBUTE_UNUSED)
-{
-	received_all = 1;
-}
-
-int test_main(int argc PTS_ATTRIBUTE_UNUSED, char **argv PTS_ATTRIBUTE_UNUSED)
+static void *drain_socket(void *arg PTS_ATTRIBUTE_UNUSED)
 {
-	char tmpfname[PATH_MAX];
-	int fd;
-
-	struct aiocb **aiocbs;
-	struct aiocb *plist[2];
-	char *bufs;
-	struct sigaction action;
-	struct sigevent event;
-	int errors = 0;
-	int ret;
-	int err;
+	char buf;
 	int i;
+	ssize_t ret;
 
-	if (sysconf(_SC_ASYNCHRONOUS_IO) < 200112L)
-		return PTS_UNSUPPORTED;
+	while (sem_wait(&start) == -1) {
+		if (errno == EINTR)
+			continue;
+		perror(TNAME " sem_wait()");
+		exit(PTS_UNRESOLVED);
+	}
 
-	PTS_GET_TMP_FILENAME(tmpfname, "pts_aio_suspend_1_1");
-	unlink(tmpfname);
+	/* getpid() identifies the main thread, not this draining thread. */
+	if (tst_process_state_wait3(getpid(), 'S', 10))
+		drain_result = PTS_UNRESOLVED;
 
-	fd = open(tmpfname, O_CREAT | O_RDWR | O_EXCL, S_IRUSR | S_IWUSR);
+	/* Leave one datagram for cleanup_aio(); discard the other payloads. */
+	for (i = 0; i < WRITE_COUNT - 1; i++) {
+		do {
+			ret = read(fds[1], &buf, sizeof(buf));
+		} while (ret == -1 && errno == EINTR);
 
-	if (fd == -1) {
-		printf(TNAME " Error at open(): %s\n", strerror(errno));
-		exit(PTS_UNRESOLVED);
+		if (ret != sizeof(buf)) {
+			printf(TNAME " Error reading socket: %zd (%s)\n",
+			       ret, ret == -1 ? strerror(errno) : "short read");
+			exit(PTS_UNRESOLVED);
+		}
 	}
 
-	unlink(tmpfname);
+	return NULL;
+}
+
+int test_main(int argc PTS_ATTRIBUTE_UNUSED, char **argv PTS_ATTRIBUTE_UNUSED)
+{
+	const struct aiocb *list[] = {NULL, &aiocbs[WAIT_FOR_AIOCB]};
+	pthread_t thread;
+	int i, ret, err;
+	int result = PTS_PASS;
+	ssize_t len;
+
+	if (sysconf(_SC_ASYNCHRONOUS_IO) < 200112L) {
+		printf(TNAME " Test UNSUPPORTED: asynchronous I/O\n");
+		return PTS_UNSUPPORTED;
+	}
 
-	bufs = malloc(NUM_AIOCBS * BUF_SIZE);
+	if (setup_aio(TNAME, fds, aiocbs, WRITE_COUNT))
+		return PTS_UNRESOLVED;
 
-	if (bufs == NULL) {
-		printf(TNAME " Error at malloc(): %s\n", strerror(errno));
-		close(fd);
+	if (sem_init(&start, 0, 0) == -1) {
+		perror(TNAME " sem_init()");
 		exit(PTS_UNRESOLVED);
 	}
 
-	if (write(fd, bufs, NUM_AIOCBS * BUF_SIZE) != (NUM_AIOCBS * BUF_SIZE)) {
-		printf(TNAME " Error at write(): %s\n", strerror(errno));
-		free(bufs);
-		close(fd);
+	ret = pthread_create(&thread, NULL, drain_socket, NULL);
+	if (ret) {
+		printf(TNAME " pthread_create(): %s\n", strerror(ret));
 		exit(PTS_UNRESOLVED);
 	}
 
-	aiocbs = malloc(sizeof(struct aiocb *) * NUM_AIOCBS);
-
-	/* Queue up a bunch of aio reads */
-	for (i = 0; i < NUM_AIOCBS; i++) {
-		aiocbs[i] = malloc(sizeof(struct aiocb));
-		memset(aiocbs[i], 0, sizeof(struct aiocb));
-
-		aiocbs[i]->aio_fildes = fd;
-		aiocbs[i]->aio_offset = i * BUF_SIZE;
-		aiocbs[i]->aio_buf = &bufs[i * BUF_SIZE];
-		aiocbs[i]->aio_nbytes = BUF_SIZE;
-		aiocbs[i]->aio_lio_opcode = LIO_READ;
+	for (i = 0; i < WRITE_COUNT; i++) {
+		if (aio_write(&aiocbs[i]) == -1) {
+			perror(TNAME " aio_write()");
+			exit(PTS_UNRESOLVED);
+		}
 	}
 
-	/* Use SIGRTMIN + 1 for list completion */
-	event.sigev_notify = SIGEV_SIGNAL;
-	event.sigev_signo = SIGRTMIN + 1;
-	event.sigev_value.sival_ptr = NULL;
-
-	/* Setup handler for list completion */
-	action.sa_sigaction = sigrt1_handler;
-	sigemptyset(&action.sa_mask);
-	action.sa_flags = SA_SIGINFO | SA_RESTART;
-	sigaction(SIGRTMIN + 1, &action, NULL);
-
-	/* Setup suspend list */
-	plist[0] = NULL;
-	plist[1] = aiocbs[WAIT_FOR_AIOCB];
-
-	/* Submit request list */
-	ret = lio_listio(LIO_NOWAIT, aiocbs, NUM_AIOCBS, &event);
-	if (ret) {
-		printf(TNAME " Error at lio_listio() %d: %s\n",
-		       errno, strerror(errno));
-		for (i = 0; i < NUM_AIOCBS; i++)
-			free(aiocbs[i]);
-		free(bufs);
-		free(aiocbs);
-		close(fd);
+	err = aio_error(&aiocbs[WAIT_FOR_AIOCB]);
+	if (err != EINPROGRESS) {
+		printf(TNAME " Expected pending write, got status %d\n", err);
 		exit(PTS_UNRESOLVED);
 	}
 
-	/* Check selected request has not completed yet */
-	err = aio_error(aiocbs[WAIT_FOR_AIOCB]);
-	if (!err) {
-		printf(TNAME " Error : AIOCB %d already completed before "
-		       "suspend\n", WAIT_FOR_AIOCB);
-		for (i = 0; i < NUM_AIOCBS; i++)
-			free(aiocbs[i]);
-		free(bufs);
-		free(aiocbs);
-		close(fd);
+	/* After releasing the drainer, only aio_suspend() should block us. */
+	if (sem_post(&start) == -1) {
+		perror(TNAME " sem_post()");
 		exit(PTS_UNRESOLVED);
 	}
 
-	/* Suspend on selected request */
-	ret = aio_suspend((const struct aiocb **)plist, 2, NULL);
+	ret = aio_suspend(list, 2, NULL);
 	if (ret) {
-		printf(TNAME " Error at aio_suspend() %d: %s\n",
-		       errno, strerror(errno));
-		for (i = 0; i < NUM_AIOCBS; i++)
-			free(aiocbs[i]);
-		free(bufs);
-		free(aiocbs);
-		close(fd);
+		perror(TNAME " aio_suspend()");
 		exit(PTS_FAIL);
 	}
 
-	/* Check selected request has completed */
-	err = aio_error(aiocbs[WAIT_FOR_AIOCB]);
-	ret = aio_return(aiocbs[WAIT_FOR_AIOCB]);
-
-	if ((err != 0) && (ret != BUF_SIZE)) {
-		printf(TNAME " Error : AIOCB %d should have completed"
-		       " after suspend\n", WAIT_FOR_AIOCB);
-		for (i = 0; i < NUM_AIOCBS; i++)
-			free(aiocbs[i]);
-		free(bufs);
-		free(aiocbs);
-		close(fd);
+	err = aio_error(&aiocbs[WAIT_FOR_AIOCB]);
+	if (err != 0) {
+		printf(TNAME " Test FAILED: write status after suspend: %d\n", err);
 		exit(PTS_FAIL);
 	}
 
-	/* Wait for list processing completion */
-	while (!received_all)
-		sleep(1);
-
-	/* Check return code and free things */
-	for (i = 0; i < NUM_AIOCBS; i++) {
-		if (i == WAIT_FOR_AIOCB)
-			continue;
-
-		err = aio_error(aiocbs[i]);
-		ret = aio_return(aiocbs[i]);
-
-		if ((err != 0) && (ret != BUF_SIZE)) {
-			printf(TNAME " req %d: error = %d - return = %d\n",
-			       i, err, ret);
-			errors++;
+	ret = pthread_join(thread, NULL);
+	if (ret) {
+		printf(TNAME " pthread_join(): %s\n", strerror(ret));
+		exit(PTS_UNRESOLVED);
+	}
+	if (drain_result != PTS_PASS)
+		result = drain_result;
+
+	/* All writes can now complete, regardless of their execution order. */
+	for (i = 0; i < WRITE_COUNT; i++) {
+		const struct aiocb *req = &aiocbs[i];
+
+		while ((err = aio_error(req)) == EINPROGRESS) {
+			if (aio_suspend(&req, 1, NULL) == -1 && errno != EINTR) {
+				perror(TNAME " aio_suspend() during cleanup");
+				exit(PTS_UNRESOLVED);
+			}
+		}
+		if (err) {
+			printf(TNAME " Test FAILED: write %d status %d\n", i, err);
+			exit(PTS_FAIL);
 		}
-
-		free(aiocbs[i]);
 	}
 
-	free(bufs);
-	free(aiocbs);
-
-	close(fd);
-
-	if (errors != 0)
-		exit(PTS_FAIL);
+	/* Only one datagram remains; the helper frees its buffer and sockets. */
+	cleanup_aio(fds, &aiocbs[WAIT_FOR_AIOCB], 1);
+	for (i = 0; i < WRITE_COUNT; i++) {
+		len = aio_return(&aiocbs[i]);
+		if (len != (ssize_t)aiocbs[i].aio_nbytes) {
+			printf(TNAME " Test FAILED: write %d returned %zd, expected %zu\n",
+			       i, len, aiocbs[i].aio_nbytes);
+			result = PTS_FAIL;
+		}
+		if (i != WAIT_FOR_AIOCB)
+			free((void *)aiocbs[i].aio_buf);
+	}
 
-	printf("Test PASSED\n");
+	if (sem_destroy(&start) == -1) {
+		perror(TNAME " sem_destroy()");
+		result = PTS_UNRESOLVED;
+	}
+	if (result == PTS_PASS)
+		printf("Test PASSED\n");
 
-	return PTS_PASS;
+	return result;
 }
Signature · 5 lines
2.51.0


-- 
Mailing list info: https://lists.linux.it/listinfo/ltp
#1 lore raw

Hi Andrea,

Quoted 1 line · Andrea Cervesato

openposix: Fix aio_suspend/1-1 completion race

Verdict - Reviewed

---
Note:

The agent can sometimes produce false positives although often its findings are genuine. If you find issues with the review, please comment this email or ignore the suggestions.

Regards,
LTP AI Reviewer

Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp