iio: proximity: sx9310: report a hysteresis of 0 when it is disabled
PATCH v2 1/1 iio: proximity: sx9310: report a hysteresis of 0 when it is disabled
sx9310_read_hysteresis() turns a PROXHYST value of 0 (no hysteresis) into a shift of 0 and reports the full threshold, which writing back then usually fails with -EINVAL. Report 0, as sx9324 and sx9360 do.
---
Changes in v2:
- Invert the conditional (Andy)
v1: https://lore.kernel.org/all/[email protected]/
Compile-tested only (W=1); I don't have SX9310 hardware.
drivers/iio/proximity/sx9310.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/iio/proximity/sx9310.c +4 -5
@@ -446,11 +446,10 @@ static int sx9310_read_hysteresis(struct sx_common_data *data,return ret; regval =FIELD_GET (SX9310_REG_PROX_CTRL10_HYST_MASK , regval); -if (!regval) - regval =5 ; - -/* regval is at most 5 */ - *val = pthresh >> (5 - regval); +if (regval) + *val = pthresh >> (5 - regval); +else + *val =0 ;return IIO_VAL_INT ; }
base-commit: 2ef6f5c4ee56e90c237c5f7687f09e635f7d30a9
Signature · 1 line
2.53.0
Jonathan Cameron
maintainerQuoted 6 lines · On Mon, 26 Oct 2026 16:50:49 +0530 Arnav Kapoor <[email protected]> wrote:
sx9310_read_hysteresis()turns a PROXHYST value of 0 (no hysteresis) into a shift of 0 and reports the full threshold, which writing back then usually fails with-EINVAL. Report 0, as sx9324 and sx9360 do.Fixes 08f0411c48f2 ("iio: sx9310: Support setting hysteresis values")Signed-off-by Arnav Kapoor <[email protected]>
Seems correct to me, but not massively urgent. So with that in mind I've queued this one on the testing branch of iio.git. I've just rebased that on the newly available 7.4-rc1, so will give it a few days exposure to the bots before pushing out for linux-next.
Thanks,
Jonathan
Quoted 33 lines
---
Changes in v2:
- Invert the conditional (Andy)v1: https://lore.kernel.org/all/[email protected]/
Compile-tested only (W=1); I don't have SX9310 hardware.
drivers/iio/proximity/sx9310.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)drivers/iio/proximity/sx9310.c +4
-5@@ -446,11 +446,10 @@ static int sx9310_read_hysteresis(struct sx_common_data *data,return ret; regval =FIELD_GET (SX9310_REG_PROX_CTRL10_HYST_MASK , regval); -if (!regval) - regval =5 ; - -/* regval is at most 5 */ - *val = pthresh >> (5 - regval); +if (regval) + *val = pthresh >> (5 - regval); +else + *val =0 ;return IIO_VAL_INT ; }base-commit:
2ef6f5c4ee56e90c237c5f7687f09e635f7d30a9