FAILED: patch "[PATCH] ALSA: usb-audio: Add mic resolution quirk for Logitech Webcam C200" failed to apply to 5.10-stable tree

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 874323b68c93c6808e034dc0113681e822e6fb42
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '[email protected]' --subject-prefix 'PATCH 5.10.y' 'HEAD^..'

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

From 874323b68c93c6808e034dc0113681e822e6fb42 Mon Sep 17 00:00:00 2001
From: Olivier Kaloudoff <[email protected]>
Date: Fri, 9 Oct 2026 01:08:44 +0200
Subject: [PATCH] ALSA: usb-audio: Add mic resolution quirk for Logitech Webcam
C200

The C200 (046d:0802) reports a mic capture volume range of 1536..7680 with a resolution of 1 (6144 steps), triggering "Warning! Unlikely big volume step count (=6144), linear volume or wrong cval->res?" at probe and exposing a uselessly fine-grained mixer control. This is the same firmware behavior as the other UVC-era Logitech webcams already carrying QUIRK_FLAG_MIC_RES_384 (C500, C600, C210, C270, C310, C510, C525, ...), so apply the same
quirk: CTL_MSG_DELAY_1M (which the Logitech VENDOR_FLG would provide if the device-specific entry did not short-circuit the lookup) plus MIC_RES_384.

Verified on real hardware: with the quirk the warning disappears and the driver logs "set resolution quirk: cval->res = 384".

---
 sound/usb/quirks.c | 2 ++
 1 file changed, 2 insertions(+)

index 170f68db74fa4..7a5c95de86ceb 100644
@@ -2494,6 +2494,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
 		   QUIRK_FLAG_DISABLE_AUTOSUSPEND),
 	DEVICE_FLG(0x045e, 0x070f, /* MS LifeChat LX-3000 Headset */
 		   QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE),
+	DEVICE_FLG(0x046d, 0x0802, /* Logitech Webcam C200 */
+		   QUIRK_FLAG_CTL_MSG_DELAY_1M | QUIRK_FLAG_MIC_RES_384),
 	DEVICE_FLG(0x046d, 0x0807, /* Logitech Webcam C500 */
 		   QUIRK_FLAG_CTL_MSG_DELAY_1M | QUIRK_FLAG_MIC_RES_384),
 	DEVICE_FLG(0x046d, 0x0808, /* Logitech Webcam C600 */

2.53.0

From: Olivier Kaloudoff <[email protected]>

[ Upstream commit 874323b68c93c6808e034dc0113681e822e6fb42 ]

The C200 (046d:0802) reports a mic capture volume range of 1536..7680 with a resolution of 1 (6144 steps), triggering "Warning! Unlikely big volume step count (=6144), linear volume or wrong cval->res?" at probe and exposing a uselessly fine-grained mixer control. This is the same firmware behavior as the other UVC-era Logitech webcams already carrying QUIRK_FLAG_MIC_RES_384 (C500, C600, C210, C270, C310, C510, C525, ...), so apply the same
quirk: CTL_MSG_DELAY_1M (which the Logitech VENDOR_FLG would provide if the device-specific entry did not short-circuit the lookup) plus MIC_RES_384.

Verified on real hardware: with the quirk the warning disappears and the driver logs "set resolution quirk: cval->res = 384".

---
 sound/usb/mixer.c | 1 +
 1 file changed, 1 insertion(+)

index 7f64199139d31..48178272bf422 100644
@@ -1163,6 +1163,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
 		}
 		break;
 
+	case USB_ID(0x046d, 0x0802): /* Logitech Webcam C200 */
 	case USB_ID(0x046d, 0x0807): /* Logitech Webcam C500 */
 	case USB_ID(0x046d, 0x0808):
 	case USB_ID(0x046d, 0x0809):

2.53.0