Skip to contentSkip to conversation

lib/crypto: x86/sha512: Partially roll up loops

PATCH Applied Eric Biggers 2 participants 6 messages Nov 12 – Nov 14

Subsystems (2)
lore
Share & tools
lore

Eric Biggers

author maintainer
#0 lore raw

cover lib/crypto: x86/sha512: Partially roll up loops

Some freshly baked loop rolls in the SSSE3 and AVX optimized SHA-512 code.

In each file, SHA-512 rounds 14 through 77 are rolled up into 8 groups of 8 rounds. This saves 20.2 KB of text. It's also likely to increase performance on the CPUs that actually run this code (i.e., CPUs without AVX2), due to the improved use of the cache, though the oldest I was able to confirm that on is Haswell which has AVX2 anyway.

Eric Biggers (2):
lib/crypto: x86/sha512: Partially roll up sha512_transform_avx() lib/crypto: x86/sha512: Partially roll up sha512_transform_ssse3()

 lib/crypto/x86/sha512-avx-asm.S   | 124 +++++++++++++++--------------
 lib/crypto/x86/sha512-ssse3-asm.S | 126 ++++++++++++++++--------------
 2 files changed, 135 insertions(+), 115 deletions(-)

base-commit: 33b4f31b1aea3f62b61c892daefc0e6a77859032

Signature · 1 line
2.56.1
author maintainer
#1 lore raw

PATCH 1/2 lib/crypto: x86/sha512: Partially roll up sha512_transform_avx()

Currently, sha512_transform_avx() unrolls all 80 SHA-512 rounds, generating 13.4 KB of text. This is wasted on most systems, which execute the AVX2 code anyway. And it's also likely to be harmful on systems that do run this code, due to cache pollution.

Roll up rounds 14 through 77 into 8 groups of 8 rounds. This requires some additional GPRs, as the offsets into the message schedule words and round constants are no longer immediates. Therefore, free up two GPRs by spilling the 'digest' and 'msglen' arguments to the stack; use them to store a pointer to the round constants and an offset into it.

This reduces the text size from 13.4 KB to 3.3 KB. (For some perspective, the 10.1 KB saved is greater than the size of all four variants of the AES-XTS assembly code combined at 7.5 KB.)

I also ran the sha512 benchmark on a Haswell system (the oldest I could easily get access to) with the AVX2 code disabled. SHA-512 throughput actually increased by 8% as a result of this commit, likely as a result of the code fitting much better into caches.

---
 lib/crypto/x86/sha512-avx-asm.S | 124 +++++++++++++++++---------------
 1 file changed, 67 insertions(+), 57 deletions(-)
lib/crypto/x86/sha512-avx-asm.S +67 -57
index a17dfedc1c519..b6c496fde8471 100644
@@ -69,6 +69,9 @@ f_64	= %r14
 g_64	= %r15
 h_64	= %rbx
 tmp0	= %rax
+# Used in the rounds 14-77 loop, while digest and msglen are spilled
+kptr	= %rdi	# Pointer to K512
+toff	= %rdx	# 8*t, where W[t] is the first QWORD scheduled in the iteration.
 
 # Local variables (stack frame)
 
@@ -77,9 +80,11 @@ W_SIZE = 80*8
 # W[t] + K[t] | W[t+1] + K[t+1]
 WK_SIZE = 2*8
 
-frame_W = 0
-frame_WK = frame_W + W_SIZE
-frame_size = frame_WK + WK_SIZE
+frame_WK = 0
+frame_W = frame_WK + WK_SIZE
+frame_digest = frame_W + W_SIZE
+frame_msglen = frame_digest + 8
+frame_size = frame_msglen + 8
 
 # Useful QWORD "arrays" for simpler memory references
 # MSG, DIGEST, K_t, W_t are arrays
@@ -127,8 +132,7 @@ frame_size = frame_WK + WK_SIZE
 	and     e_64, T1          # T1 = (f ^ g) & e
 	xor     e_64, tmp0        # tmp = (e ror 23) ^ e
 	xor     g_64, T1          # T1 = ((f ^ g) & e) ^ g = CH(e,f,g)
-	idx = \rnd
-	add     WK_2(idx), T1     # W[t] + K[t] from message scheduler
+	add     WK_2(\rnd), T1    # W[t] + K[t] from message scheduler
 	RORQ    tmp0, 4   # 18    # tmp = ((e ror 23) ^ e) ror 4
 	xor     e_64, tmp0        # tmp = (((e ror 23) ^ e) ror 4) ^ e
 	mov     a_64, T2          # T2 = a
@@ -152,26 +156,27 @@ frame_size = frame_WK + WK_SIZE
 	RotateState
 .endm
 
-.macro SHA512_2Sched_2Round_avx rnd
+.macro SHA512_2Sched_2Round_avx offset
 	# Compute rounds t-2 and t-1
 	# Compute message schedule QWORDS t and t+1
+	# where t = (toff + \offset) / 8
 
 	#   Two rounds are computed based on the values for K[t-2]+W[t-2] and
-	# K[t-1]+W[t-1] which were previously stored at WK_2 by the message
+	# K[t-1]+W[t-1] which were previously stored at frame_WK by the message
 	# scheduler.
-	#   The two new schedule QWORDS are stored at [W_t(t)] and [W_t(t+1)].
+	#   The two new schedule QWORDS are stored at
+	# (frame_W + \offset)(%rsp, toff) and (frame_W + \offset + 8)(%rsp, toff).
 	# They are then added to their respective SHA512 constants at
-	# [K_t(t)] and [K_t(t+1)] and stored at dqword [WK_2(t)]
-	#   For brievity, the comments following vectored instructions only refer to
+	# \offset(kptr, toff) and (\offset + 8)(kptr, toff) and stored at
+	# dqword frame_WK(%rsp).
+	#   For brevity, the comments following vectored instructions only refer to
 	# the first of a pair of QWORDS.
 	# Eg. XMM4=W[t-2] really means XMM4={W[t-2]|W[t-1]}
 	#   The computation of the message schedule and the rounds are tightly
 	# stitched to take advantage of instruction-level parallelism.
 
-	idx = \rnd - 2
-	vmovdqa	W_t(idx), %xmm4		# XMM4 = W[t-2]
-	idx = \rnd - 15
-	vmovdqu	W_t(idx), %xmm5		# XMM5 = W[t-15]
+	vmovdqa	(frame_W + \offset - 16)(%rsp, toff), %xmm4	# XMM4 = W[t-2]
+	vmovdqu	(frame_W + \offset - 120)(%rsp, toff), %xmm5	# XMM5 = W[t-15]
 	mov	f_64, T1
 	vpsrlq	$61, %xmm4, %xmm0	# XMM0 = W[t-2]>>61
 	mov	e_64, tmp0
@@ -183,8 +188,7 @@ frame_size = frame_WK + WK_SIZE
 	xor	e_64, tmp0
 	vpxor	%xmm1, %xmm0, %xmm0	# XMM0 = W[t-2]>>61 ^ W[t-2]>>19
 	xor	g_64, T1
-	idx = \rnd
-	add	WK_2(idx), T1#
+	add	frame_WK(%rsp), T1
 	vpsrlq	$8, %xmm5, %xmm7	# XMM7 = W[t-15]>>8
 	RORQ	tmp0, 4 # 18
 	vpsrlq	$6, %xmm4, %xmm2	# XMM2 = W[t-2]>>6
@@ -223,17 +227,14 @@ frame_size = frame_WK + WK_SIZE
 	vpxor	%xmm2, %xmm0, %xmm0     # XMM0 = s1(W[t-2])
 	mov	e_64, tmp0
 	xor	g_64, T1
-	idx = \rnd - 16
-	vpaddq	W_t(idx), %xmm0, %xmm0  # XMM0 = s1(W[t-2]) + W[t-16]
-	idx = \rnd - 7
-	vmovdqu	W_t(idx), %xmm1		# XMM1 = W[t-7]
+	vpaddq	(frame_W + \offset - 128)(%rsp, toff), %xmm0, %xmm0  # XMM0 = s1(W[t-2]) + W[t-16]
+	vmovdqu	(frame_W + \offset - 56)(%rsp, toff), %xmm1	# XMM1 = W[t-7]
 	RORQ	tmp0, 23 # 41
 	and	e_64, T1
 	xor	e_64, tmp0
 	xor	g_64, T1
 	vpsllq	$(64-8), %xmm5, %xmm5   # XMM5 = W[t-15]<<56
-	idx = \rnd + 1
-	add	WK_2(idx), T1
+	add	frame_WK + 8(%rsp), T1
 	vpxor	%xmm5, %xmm6, %xmm6     # XMM6 = s0(W[t-15])
 	RORQ	tmp0, 4 # 18
 	vpaddq	%xmm6, %xmm0, %xmm0     # XMM0 = s1(W[t-2]) + W[t-16] + s0(W[t-15])
@@ -244,10 +245,9 @@ frame_size = frame_WK + WK_SIZE
 	add	h_64, T1
 	RORQ	tmp0, 14 # 14
 	add	tmp0, T1
-	idx = \rnd
-	vmovdqa	%xmm0, W_t(idx)		# Store W[t]
-	vpaddq	K_t(idx), %xmm0, %xmm0  # Compute W[t]+K[t]
-	vmovdqa	%xmm0, WK_2(idx)	# Store W[t]+K[t] for next rounds
+	vmovdqa	%xmm0, (frame_W + \offset)(%rsp, toff)	# Store W[t]
+	vpaddq	\offset(kptr, toff), %xmm0, %xmm0  # Compute W[t]+K[t]
+	vmovdqa	%xmm0, frame_WK(%rsp)	# Store W[t]+K[t] for next rounds
 	mov	a_64, tmp0
 	xor	c_64, T2
 	and	c_64, tmp0
@@ -290,6 +290,10 @@ SYM_FUNC_START(sha512_transform_avx)
 	sub     $frame_size, %rsp
 	and	$~(0x20 - 1), %rsp
 
+	# Spill digest and msglen to free up %rdi and %rdx for kptr and toff.
+	mov     digest, frame_digest(%rsp)
+	mov     msglen, frame_msglen(%rsp)
+
 .Lupdateblock:
 
 	# Load state variables
@@ -302,39 +306,45 @@ SYM_FUNC_START(sha512_transform_avx)
 	mov     DIGEST(6), g_64
 	mov     DIGEST(7), h_64
 
-	t = 0
-	.rept 80/2 + 1
-	# (80 rounds) / (2 rounds/iteration) + (1 iteration)
-	# +1 iteration because the scheduler leads hashing by 1 iteration
-		.if t < 2
-			# BSWAP 2 QWORDS
-			vmovdqa  XMM_QWORD_BSWAP(%rip), %xmm1
-			vmovdqu  MSG(t), %xmm0
-			vpshufb  %xmm1, %xmm0, %xmm0    # BSWAP
-			vmovdqa  %xmm0, W_t(t) # Store Scheduled Pair
-			vpaddq   K_t(t), %xmm0, %xmm0 # Compute W[t]+K[t]
-			vmovdqa  %xmm0, WK_2(t) # Store into WK for rounds
-		.elseif t < 16
-			# BSWAP 2 QWORDS# Compute 2 Rounds
-			vmovdqu  MSG(t), %xmm0
-			vpshufb  %xmm1, %xmm0, %xmm0    # BSWAP
-			SHA512_Round t-2    # Round t-2
-			vmovdqa  %xmm0, W_t(t) # Store Scheduled Pair
-			vpaddq   K_t(t), %xmm0, %xmm0 # Compute W[t]+K[t]
-			SHA512_Round t-1    # Round t-1
-			vmovdqa  %xmm0, WK_2(t)# Store W[t]+K[t] into WK
-		.elseif t < 79
-			# Schedule 2 QWORDS# Compute 2 Rounds
-			SHA512_2Sched_2Round_avx t
-		.else
-			# Compute 2 Rounds
-			SHA512_Round t-2
-			SHA512_Round t-1
-		.endif
-		t = t+2
+	# Rounds 0 - 13: BSWAP 2 QWORDS and compute 2 rounds
+	vmovdqa  XMM_QWORD_BSWAP(%rip), %xmm1
+	vmovdqu  MSG(0), %xmm0
+	vpshufb  %xmm1, %xmm0, %xmm0    # BSWAP
+	vmovdqa  %xmm0, W_t(0) # Store Scheduled Pair
+	vpaddq   K_t(0), %xmm0, %xmm0 # Compute W[t]+K[t]
+	vmovdqa  %xmm0, WK_2(0) # Store into WK for rounds
+	.irp t, 2,4,6,8,10,12,14
+		vmovdqu  MSG(\t), %xmm0
+		vpshufb  %xmm1, %xmm0, %xmm0    # BSWAP
+		SHA512_Round (\t-2)    # Round t-2
+		vmovdqa  %xmm0, W_t(\t) # Store Scheduled Pair
+		vpaddq   K_t(\t), %xmm0, %xmm0 # Compute W[t]+K[t]
+		SHA512_Round (\t-1)    # Round t-1
+		vmovdqa  %xmm0, WK_2(\t)# Store W[t]+K[t] into WK
 	.endr
 
+	# Rounds 14 - 77: Schedule 2 QWORDS and compute 2 rounds,
+	# rolled into 8 iterations of 8 rounds.
+	lea	K512(%rip), kptr
+	mov	$16*8, toff
+
+.p2align 4
+.Lsched_loop:
+	SHA512_2Sched_2Round_avx 0
+	SHA512_2Sched_2Round_avx 16
+	SHA512_2Sched_2Round_avx 32
+	SHA512_2Sched_2Round_avx 48
+
+	add	$8*8, toff
+	cmp	$80*8, toff
+	jne	.Lsched_loop
+
+	# Compute last 2 Rounds
+	SHA512_Round 78
+	SHA512_Round 79
+
 	# Update digest
+	mov     frame_digest(%rsp), digest
 	add     a_64, DIGEST(0)
 	add     b_64, DIGEST(1)
 	add     c_64, DIGEST(2)
@@ -346,7 +356,7 @@ SYM_FUNC_START(sha512_transform_avx)
 
 	# Advance to next message block
 	add     $16*8, msg
-	dec     msglen
+	decq    frame_msglen(%rsp)
 	jnz     .Lupdateblock
 
 	# Deallocate Stack Space
Signature · 1 line
2.56.1
maintainer Acked-by on v1 1/2
#2 lore raw

Re: [PATCH 1/2] lib/crypto: x86/sha512: Partially roll up sha512_transform_avx()

Quoted 20 lines · Eric Biggers

Currently, sha512_transform_avx() unrolls all 80 SHA-512 rounds, generating 13.4 KB of text. This is wasted on most systems, which execute the AVX2 code anyway. And it's also likely to be harmful on systems that do run this code, due to cache pollution.

Roll up rounds 14 through 77 into 8 groups of 8 rounds. This requires some additional GPRs, as the offsets into the message schedule words and round constants are no longer immediates. Therefore, free up two GPRs by spilling the 'digest' and 'msglen' arguments to the stack; use them to store a pointer to the round constants and an offset into it.

This reduces the text size from 13.4 KB to 3.3 KB. (For some perspective, the 10.1 KB saved is greater than the size of all four variants of the AES-XTS assembly code combined at 7.5 KB.)

I also ran the sha512 benchmark on a Haswell system (the oldest I could easily get access to) with the AVX2 code disabled. SHA-512 throughput actually increased by 8% as a result of this commit, likely as a result of the code fitting much better into caches.

Quoted 5 lines
---
 lib/crypto/x86/sha512-avx-asm.S | 124 +++++++++++++++++---------------
 1 file changed, 67 insertions(+), 57 deletions(-)
author maintainer
#3 lore raw

PATCH 2/2 lib/crypto: x86/sha512: Partially roll up sha512_transform_ssse3()

In reply to Eric Biggers

Currently, sha512_transform_ssse3() unrolls all 80 SHA-512 rounds, generating 13.4 KB of text. This is wasted on most systems, which execute the AVX2 code anyway. And it's also likely to be harmful on systems that do run this code, due to cache pollution.

Roll up rounds 14 through 77 into 8 groups of 8 rounds. This requires some additional GPRs, as the offsets into the message schedule words and round constants are no longer immediates. Therefore, free up two GPRs by spilling the 'digest' and 'msglen' arguments to the stack; use them to store a pointer to the round constants and an offset into it.

This reduces the text size from 13.4 KB to 3.3 KB. (For some perspective, the 10.1 KB saved is greater than the size of all four variants of the AES-XTS assembly code combined at 7.5 KB.)

I also ran the sha512 benchmark on a Haswell system (the oldest I could easily get access to) with the AVX and AVX2 code disabled. SHA-512 throughput actually increased by 5% as a result of this commit, likely as a result of the code fitting much better into caches.

---
 lib/crypto/x86/sha512-ssse3-asm.S | 126 ++++++++++++++++--------------
 1 file changed, 68 insertions(+), 58 deletions(-)
lib/crypto/x86/sha512-ssse3-asm.S +68 -58
index 1a37b7a735cf9..4eccce486ab60 100644
@@ -69,15 +69,20 @@ f_64 =		%r14
 g_64 =		%r15
 h_64 =		%rbx
 tmp0 =		%rax
+# Used in the rounds 14-77 loop, while digest and msglen are spilled
+kptr =		%rdi	# Pointer to K512
+toff =		%rdx	# 8*t, where W[t] is the first QWORD scheduled in the iteration.
 
 # Local variables (stack frame)
 
 W_SIZE = 80*8
 WK_SIZE = 2*8
 
-frame_W = 0
-frame_WK = frame_W + W_SIZE
-frame_size = frame_WK + WK_SIZE
+frame_WK = 0
+frame_W = frame_WK + WK_SIZE
+frame_digest = frame_W + W_SIZE
+frame_msglen = frame_digest + 8
+frame_size = frame_msglen + 8
 
 # Useful QWORD "arrays" for simpler memory references
 # MSG, DIGEST, K_t, W_t are arrays
@@ -121,8 +126,7 @@ frame_size = frame_WK + WK_SIZE
 	and	e_64, T1          # T1 = (f ^ g) & e
 	xor	e_64, tmp0        # tmp = (e ror 23) ^ e
 	xor	g_64, T1          # T1 = ((f ^ g) & e) ^ g = CH(e,f,g)
-	idx = \rnd
-	add	WK_2(idx), T1     # W[t] + K[t] from message scheduler
+	add	WK_2(\rnd), T1    # W[t] + K[t] from message scheduler
 	ror	$4, tmp0  # 18    # tmp = ((e ror 23) ^ e) ror 4
 	xor	e_64, tmp0        # tmp = (((e ror 23) ^ e) ror 4) ^ e
 	mov	a_64, T2          # T2 = a
@@ -146,18 +150,21 @@ frame_size = frame_WK + WK_SIZE
 	RotateState
 .endm
 
-.macro SHA512_2Sched_2Round_sse rnd
+.macro SHA512_2Sched_2Round_sse offset
 
 	# Compute rounds t-2 and t-1
 	# Compute message schedule QWORDS t and t+1
+	# where t = (toff + \offset) / 8
 
 	#   Two rounds are computed based on the values for K[t-2]+W[t-2] and
-	# K[t-1]+W[t-1] which were previously stored at WK_2 by the message
+	# K[t-1]+W[t-1] which were previously stored at frame_WK by the message
 	# scheduler.
-	#   The two new schedule QWORDS are stored at [W_t(%%t)] and [W_t(%%t+1)].
+	#   The two new schedule QWORDS are stored at
+	# (frame_W + \offset)(%rsp, toff) and (frame_W + \offset + 8)(%rsp, toff).
 	# They are then added to their respective SHA512 constants at
-	# [K_t(%%t)] and [K_t(%%t+1)] and stored at dqword [WK_2(%%t)]
-	#   For brievity, the comments following vectored instructions only refer to
+	# \offset(kptr, toff) and (\offset + 8)(kptr, toff) and stored at
+	# dqword frame_WK(%rsp).
+	#   For brevity, the comments following vectored instructions only refer to
 	# the first of a pair of QWORDS.
 	# Eg. XMM2=W[t-2] really means XMM2={W[t-2]|W[t-1]}
 	#   The computation of the message schedule and the rounds are tightly
@@ -167,16 +174,13 @@ frame_size = frame_WK + WK_SIZE
 	# by two tabs.
 
 	mov	f_64, T1
-	idx = \rnd -2
-	movdqa	W_t(idx), %xmm2		    # XMM2 = W[t-2]
+	movdqa	(frame_W + \offset - 16)(%rsp, toff), %xmm2	    # XMM2 = W[t-2]
 	xor	g_64, T1
 	and	e_64, T1
 	movdqa	%xmm2, %xmm0	            # XMM0 = W[t-2]
 	xor	g_64, T1
-	idx = \rnd
-	add	WK_2(idx), T1
-	idx = \rnd - 15
-	movdqu	W_t(idx), %xmm5		    # XMM5 = W[t-15]
+	add	frame_WK(%rsp), T1
+	movdqu	(frame_W + \offset - 120)(%rsp, toff), %xmm5	    # XMM5 = W[t-15]
 	mov	e_64, tmp0
 	ror	$23, tmp0 # 41
 	movdqa	%xmm5, %xmm3	            # XMM3 = W[t-15]
@@ -219,8 +223,7 @@ frame_size = frame_WK + WK_SIZE
 	and	e_64, T1
 	xor	g_64, T1
 	psllq	$(64-19)-(64-61) , %xmm1    # XMM1 = W[t-2] << 42
-	idx = \rnd + 1
-	add	WK_2(idx), T1
+	add	frame_WK + 8(%rsp), T1
 	mov	e_64, tmp0
 	psllq	$(64-1)-(64-8), %xmm4	    # XMM4 = W[t-15] << 7
 	ror	$23, tmp0 # 41
@@ -240,24 +243,21 @@ frame_size = frame_WK + WK_SIZE
 	pxor	%xmm1, %xmm0		    # XMM0 = s1(W[t-2])
 	mov	a_64, tmp0
 	and	c_64, tmp0
-	idx = \rnd - 7
-	movdqu	W_t(idx), %xmm1		    # XMM1 = W[t-7]
+	movdqu	(frame_W + \offset - 56)(%rsp, toff), %xmm1 # XMM1 = W[t-7]
 	xor	tmp0, T2
 	pxor	%xmm4, %xmm3                # XMM3 = s0(W[t-15])
 	mov	a_64, tmp0
 	paddq	%xmm3, %xmm0		    # XMM0 = s1(W[t-2]) + s0(W[t-15])
 	ror	$5, tmp0 # 39
-	idx =\rnd-16
-	paddq	W_t(idx), %xmm0		    # XMM0 = s1(W[t-2]) + s0(W[t-15]) + W[t-16]
+	paddq	(frame_W + \offset - 128)(%rsp, toff), %xmm0 # XMM0 = s1(W[t-2]) + s0(W[t-15]) + W[t-16]
 	xor	a_64, tmp0
 	paddq	%xmm1, %xmm0	            # XMM0 = s1(W[t-2]) + W[t-7] + s0(W[t-15]) + W[t-16]
 	ror	$6, tmp0 # 34
-	movdqa	%xmm0, W_t(\rnd)	    # Store scheduled qwords
+	movdqa	%xmm0, (frame_W + \offset)(%rsp, toff)	    # Store scheduled qwords
 	xor	a_64, tmp0
-	paddq	K_t(\rnd), %xmm0	    # Compute W[t]+K[t]
+	paddq	\offset(kptr, toff), %xmm0  # Compute W[t]+K[t]
 	ror	$28, tmp0 # 28
-	idx = \rnd
-	movdqa	%xmm0, WK_2(idx)	    # Store W[t]+K[t] for next rounds
+	movdqa	%xmm0, frame_WK(%rsp)	    # Store W[t]+K[t] for next rounds
 	add	tmp0, T2
 	add	T1, d_64
 	lea	(T1, T2), h_64
@@ -289,9 +289,13 @@ SYM_FUNC_START(sha512_transform_ssse3)
 	sub	$frame_size, %rsp
 	and	$~(0x20 - 1), %rsp
 
+	# Spill digest and msglen to free up %rdi and %rdx for kptr and toff.
+	mov	digest, frame_digest(%rsp)
+	mov	msglen, frame_msglen(%rsp)
+
 .Lupdateblock:
 
-# Load state variables
+	# Load state variables
 	mov	DIGEST(0), a_64
 	mov	DIGEST(1), b_64
 	mov	DIGEST(2), c_64
@@ -301,39 +305,45 @@ SYM_FUNC_START(sha512_transform_ssse3)
 	mov	DIGEST(6), g_64
 	mov	DIGEST(7), h_64
 
-	t = 0
-	.rept 80/2 + 1
-	# (80 rounds) / (2 rounds/iteration) + (1 iteration)
-	# +1 iteration because the scheduler leads hashing by 1 iteration
-		.if t < 2
-			# BSWAP 2 QWORDS
-			movdqa	XMM_QWORD_BSWAP(%rip), %xmm1
-			movdqu	MSG(t), %xmm0
-			pshufb	%xmm1, %xmm0	# BSWAP
-			movdqa	%xmm0, W_t(t)	# Store Scheduled Pair
-			paddq	K_t(t), %xmm0	# Compute W[t]+K[t]
-			movdqa	%xmm0, WK_2(t)	# Store into WK for rounds
-		.elseif t < 16
-			# BSWAP 2 QWORDS# Compute 2 Rounds
-			movdqu	MSG(t), %xmm0
-			pshufb	%xmm1, %xmm0	# BSWAP
-			SHA512_Round t-2	# Round t-2
-			movdqa	%xmm0, W_t(t)	# Store Scheduled Pair
-			paddq	K_t(t), %xmm0	# Compute W[t]+K[t]
-			SHA512_Round t-1	# Round t-1
-			movdqa	%xmm0, WK_2(t)	# Store W[t]+K[t] into WK
-		.elseif t < 79
-			# Schedule 2 QWORDS# Compute 2 Rounds
-			SHA512_2Sched_2Round_sse t
-		.else
-			# Compute 2 Rounds
-			SHA512_Round t-2
-			SHA512_Round t-1
-		.endif
-		t = t+2
+	# Rounds 0 - 13: BSWAP 2 QWORDS and compute 2 rounds
+	movdqa	XMM_QWORD_BSWAP(%rip), %xmm1
+	movdqu	MSG(0), %xmm0
+	pshufb	%xmm1, %xmm0	# BSWAP
+	movdqa	%xmm0, W_t(0)	# Store Scheduled Pair
+	paddq	K_t(0), %xmm0	# Compute W[t]+K[t]
+	movdqa	%xmm0, WK_2(0)	# Store into WK for rounds
+	.irp t, 2,4,6,8,10,12,14
+		movdqu	MSG(\t), %xmm0
+		pshufb	%xmm1, %xmm0	# BSWAP
+		SHA512_Round (\t-2)	# Round t-2
+		movdqa	%xmm0, W_t(\t)	# Store Scheduled Pair
+		paddq	K_t(\t), %xmm0	# Compute W[t]+K[t]
+		SHA512_Round (\t-1)	# Round t-1
+		movdqa	%xmm0, WK_2(\t)	# Store W[t]+K[t] into WK
 	.endr
 
+	# Rounds 14 - 77: Schedule 2 QWORDS and compute 2 rounds,
+	# rolled into 8 iterations of 8 rounds.
+	lea	K512(%rip), kptr
+	mov	$16*8, toff
+
+.p2align 4
+.Lsched_loop:
+	SHA512_2Sched_2Round_sse 0
+	SHA512_2Sched_2Round_sse 16
+	SHA512_2Sched_2Round_sse 32
+	SHA512_2Sched_2Round_sse 48
+
+	add	$8*8, toff
+	cmp	$80*8, toff
+	jne	.Lsched_loop
+
+	# Compute last 2 Rounds
+	SHA512_Round 78
+	SHA512_Round 79
+
 	# Update digest
+	mov	frame_digest(%rsp), digest
 	add	a_64, DIGEST(0)
 	add	b_64, DIGEST(1)
 	add	c_64, DIGEST(2)
@@ -345,7 +355,7 @@ SYM_FUNC_START(sha512_transform_ssse3)
 
 	# Advance to next message block
 	add	$16*8, msg
-	dec	msglen
+	decq	frame_msglen(%rsp)
 	jnz	.Lupdateblock
 
 	# Deallocate Stack Space
Signature · 1 line
2.56.1
maintainer Acked-by on v1 2/2
#4 lore raw

Re: [PATCH 2/2] lib/crypto: x86/sha512: Partially roll up sha512_transform_ssse3()

Quoted 20 lines · Eric Biggers

Currently, sha512_transform_ssse3() unrolls all 80 SHA-512 rounds, generating 13.4 KB of text. This is wasted on most systems, which execute the AVX2 code anyway. And it's also likely to be harmful on systems that do run this code, due to cache pollution.

Roll up rounds 14 through 77 into 8 groups of 8 rounds. This requires some additional GPRs, as the offsets into the message schedule words and round constants are no longer immediates. Therefore, free up two GPRs by spilling the 'digest' and 'msglen' arguments to the stack; use them to store a pointer to the round constants and an offset into it.

This reduces the text size from 13.4 KB to 3.3 KB. (For some perspective, the 10.1 KB saved is greater than the size of all four variants of the AES-XTS assembly code combined at 7.5 KB.)

I also ran the sha512 benchmark on a Haswell system (the oldest I could easily get access to) with the AVX and AVX2 code disabled. SHA-512 throughput actually increased by 5% as a result of this commit, likely as a result of the code fitting much better into caches.

Quoted 5 lines
---
 lib/crypto/x86/sha512-ssse3-asm.S | 126 ++++++++++++++++--------------
 1 file changed, 68 insertions(+), 58 deletions(-)
author maintainer Applied
#5 lore raw
In reply to Eric Biggers
Quoted 9 lines · Eric Biggers

Some freshly baked loop rolls in the SSSE3 and AVX optimized SHA-512 code.

In each file, SHA-512 rounds 14 through 77 are rolled up into 8 groups of 8 rounds. This saves 20.2 KB of text. It's also likely to increase performance on the CPUs that actually run this code (i.e., CPUs without AVX2), due to the improved use of the cache, though the oldest I was able to confirm that on is Haswell which has AVX2 anyway.

Quoted 7 lines

Eric Biggers (2):
lib/crypto: x86/sha512: Partially roll up sha512_transform_avx() lib/crypto: x86/sha512: Partially roll up sha512_transform_ssse3()

 lib/crypto/x86/sha512-avx-asm.S   | 124 +++++++++++++++--------------
 lib/crypto/x86/sha512-ssse3-asm.S | 126 ++++++++++++++++--------------
 2 files changed, 135 insertions(+), 115 deletions(-)

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git/log/?h=libcrypto-next

- Eric