Skip to contentSkip to conversation

ARM: dts: imx6ulz-bsh-smm-m2: add boot phase properties

PATCH New Dario Binacchi 1 participant 1 message Nov 20

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: imx6ulz-bsh-smm-m2: add boot phase properties

Add boot phase properties to the resources needed during the boot process.

The BSH SMM M2 needs UART and NAND access.

---

 arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts | 3 +++
 1 file changed, 3 insertions(+)
arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts +3 -0
index 2d9f495660c9..c74003ee9efc 100644
@@ -26,6 +26,7 @@ &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
 	nand-on-flash-bbt;
+	bootph-all;
 	status = "okay";
 };
 
@@ -55,6 +56,7 @@ bluetooth {
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
+	bootph-all;
 	status = "okay";
 };
 
@@ -135,6 +137,7 @@ pinctrl_uart4: uart4grp {
 			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
 			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
 		>;
+		bootph-all;
 	};
 
 	pinctrl_wlan: wlangrp {

---
base-commit: 65e4fd942f72a9dba0e4e257290c4fa1aa756854
branch: imx6ulz-bsh-smm-m2-bootph

Signature · 1 line
2.43.0