pinctrl: rockchip: Fix RK3506 pinctrl support
Subsystems (3)
PATCH v2 1/1 pinctrl: rockchip: Fix RK3506 pinctrl support
The pinctrl driver added in commit dbd2317d7b9f ("pinctrl: rockchip:
Add rk3506 pinctrl support") depends on a rockchip,ioc1 property not documented in dt-bindings to work, i.e. it expects the pinctrl node to look something like following:
pinctrl {
rockchip,pmu = <&gpio0_ioc>;
rockchip,ioc1 = <&gpio1_ioc>;
rockchip,grf = <&gpio234_ioc>;
gpio0 { };
gpio1 { };
gpio2 { };};
With the commit 63113d4fce6c ("pinctrl: rockchip: Add RV1106 pinctrl support") the driver gained support for using GPIO bank referenced IO control register blocks using the rockchip,grf phandle of the bank node.
Change the driver to work with dt-bindings documented nodes and properties, i.e. something like:
pinctrl {
rockchip,grf = <&gpio234_ioc>;
gpio0 {
rockchip,grf = <&gpio0_ioc>;
};
gpio1 {
rockchip,grf = <&gpio1_ioc>;
};
gpio2 { };};
---
The initial devicetree submitted for RK3506 at [1] uses rockchip,grf props in gpio0 and gpio1 nodes together with a rockchip,grf in the pinctrl node to work as the fallback for gpio2, gpio3 and gpio4.
[1] https://patch.msgid.link/[email protected]/
Changes in v2:
- Drop IOMUX_SOURCE_PMU flag
- Collect r-b tag
Link to v1: https://patch.msgid.link/[email protected]/
--- drivers/pinctrl/pinctrl-rockchip.c | 57 ++++++++++++------------------ drivers/pinctrl/pinctrl-rockchip.h | 1 - 2 files changed, 23 insertions(+), 35 deletions(-)
drivers/pinctrl/pinctrl-rockchip.c +23 -34
@@ -1335,12 +1335,8 @@ static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin)if (ctrl->type ==RV1103B && bank->bank_num ==2 && pin >=12 )return 0 ; -if (ctrl->type ==RK3506 ) { -if (bank->bank_num ==1 ) - regmap = info->regmap_ioc1; -else if (bank->bank_num ==4 ) -return 0 ; - } +if (ctrl->type ==RK3506 && bank->bank_num ==4 ) +return 0 ;/* get basic quadrupel of mux registers and the correct reg inside */ mux_type = bank->iomux[iomux_num].type;
@@ -1492,12 +1488,8 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)if (ctrl->type ==RV1103B && bank->bank_num ==2 && pin >=12 )return 0 ; -if (ctrl->type ==RK3506 ) { -if (bank->bank_num ==1 ) - regmap = info->regmap_ioc1; -else if (bank->bank_num ==4 ) -return 0 ; - } +if (ctrl->type ==RK3506 && bank->bank_num ==4 ) +return 0 ;/* get basic quadrupel of mux registers and the correct reg inside */ mux_type = bank->iomux[iomux_num].type;
@@ -2568,9 +2560,13 @@ static int rk3506_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,struct rockchip_pinctrl *info = bank->drvdata;int ret =0 ; +if (bank->regmap_ioc) + *regmap = bank->regmap_ioc; +else + *regmap = info->regmap_base; +switch (bank->bank_num) {case 0 : - *regmap = info->regmap_pmu;if (pin_num >24 ) { ret = -EINVAL ; }else if (pin_num <24 ) {
@@ -2584,7 +2580,6 @@ static int rk3506_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 1 : - *regmap = info->regmap_ioc1;if (pin_num <28 ) *reg =RK3506_DRV_GPIO1_OFFSET ;else
@@ -2592,7 +2587,6 @@ static int rk3506_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 2 : - *regmap = info->regmap_base;if (pin_num <17 ) *reg =RK3506_DRV_GPIO2_OFFSET ;else
@@ -2600,7 +2594,6 @@ static int rk3506_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 3 : - *regmap = info->regmap_base;if (pin_num <15 ) *reg =RK3506_DRV_GPIO3_OFFSET ;else
@@ -2608,7 +2601,6 @@ static int rk3506_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 4 : - *regmap = info->regmap_base;if (pin_num <8 || pin_num >11 ) { ret = -EINVAL ; }else {
@@ -2653,9 +2645,13 @@ static int rk3506_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,struct rockchip_pinctrl *info = bank->drvdata;int ret =0 ; +if (bank->regmap_ioc) + *regmap = bank->regmap_ioc; +else + *regmap = info->regmap_base; +switch (bank->bank_num) {case 0 : - *regmap = info->regmap_pmu;if (pin_num >24 ) { ret = -EINVAL ; }else if (pin_num <24 ) {
@@ -2669,7 +2665,6 @@ static int rk3506_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 1 : - *regmap = info->regmap_ioc1;if (pin_num <28 ) *reg =RK3506_PULL_GPIO1_OFFSET ;else
@@ -2677,7 +2672,6 @@ static int rk3506_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 2 : - *regmap = info->regmap_base;if (pin_num <17 ) *reg =RK3506_PULL_GPIO2_OFFSET ;else
@@ -2685,7 +2679,6 @@ static int rk3506_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 3 : - *regmap = info->regmap_base;if (pin_num <15 ) *reg =RK3506_PULL_GPIO3_OFFSET ;else
@@ -2693,7 +2686,6 @@ static int rk3506_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 4 : - *regmap = info->regmap_base;if (pin_num <8 || pin_num >11 ) { ret = -EINVAL ; }else {
@@ -2739,9 +2731,13 @@ static int rk3506_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,struct rockchip_pinctrl *info = bank->drvdata;int ret =0 ; +if (bank->regmap_ioc) + *regmap = bank->regmap_ioc; +else + *regmap = info->regmap_base; +switch (bank->bank_num) {case 0 : - *regmap = info->regmap_pmu;if (pin_num >24 ) { ret = -EINVAL ; }else if (pin_num <24 ) {
@@ -2755,7 +2751,6 @@ static int rk3506_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 1 : - *regmap = info->regmap_ioc1;if (pin_num <28 ) *reg =RK3506_SMT_GPIO1_OFFSET ;else
@@ -2763,7 +2758,6 @@ static int rk3506_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 2 : - *regmap = info->regmap_base;if (pin_num <17 ) *reg =RK3506_SMT_GPIO2_OFFSET ;else
@@ -2771,7 +2765,6 @@ static int rk3506_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 3 : - *regmap = info->regmap_base;if (pin_num <15 ) *reg =RK3506_SMT_GPIO3_OFFSET ;else
@@ -2779,7 +2772,6 @@ static int rk3506_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,break ;case 4 : - *regmap = info->regmap_base;if (pin_num <8 || pin_num >11 ) { ret = -EINVAL ; }else {
@@ -5030,9 +5022,6 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)/* try to find the optional reference to the pmu syscon */ info->regmap_pmu =syscon_regmap_lookup_by_phandle_optional (np,"rockchip,pmu" ); -/* try to find the optional reference to the ioc1 syscon */ - info->regmap_ioc1 =syscon_regmap_lookup_by_phandle_optional (np,"rockchip,ioc1" ); -if (ctrl->type ==RK3308 ) { ret =rk3308_soc_data_init (info);if (ret)
@@ -5651,10 +5640,10 @@ static struct rockchip_pin_ctrl rk3399_pin_ctrl = {static struct rockchip_pin_bank rk3506_pin_banks[] = { PIN_BANK_IOMUX_FLAGS_OFFSET_DRV_FLAGS_PULL_FLAGS(0, 32, "gpio0", - IOMUX_WIDTH_4BIT | IOMUX_SOURCE_PMU, - IOMUX_WIDTH_4BIT | IOMUX_SOURCE_PMU, - IOMUX_WIDTH_4BIT | IOMUX_SOURCE_PMU, - IOMUX_WIDTH_2BIT | IOMUX_SOURCE_PMU, + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_2BIT, 0x0, 0x8, 0x10, 0x830, DRV_TYPE_IO_LEVEL_8_BIT, DRV_TYPE_IO_LEVEL_8_BIT,
drivers/pinctrl/pinctrl-rockchip.h +0 -1
@@ -468,7 +468,6 @@ struct rockchip_pinctrl {int reg_size;struct regmap *regmap_pull;struct regmap *regmap_pmu; -struct regmap *regmap_ioc1;struct device *dev;struct rockchip_pin_ctrl *ctrl;struct pinctrl_desc pctl;
Signature · 1 line
2.56.1