ALSA: hda/realtek: Enable mute LEDs for HP OmniBook 7 14-hg0xxx
PATCH 1/1 ALSA: hda/realtek: Enable mute LEDs for HP OmniBook 7 14-hg0xxx
Use ALC287_FIXUP_CS35L41_I2C_2_HP_MUTE_LEDS for PCI SSID 103c:8f07 (HP OmniBook 7 Laptop 14-hg0xxx) so both mute and mic-mute LEDs work alongside the dual CS35L41 I2C amplifiers.
--- sound/hda/codecs/realtek/alc269.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Notes for maintainers:
PCI SSID 103c:8f07 was previously listed as "HP Agusta G7KX" using ALC287_FIXUP_CS35L41_I2C_2. On my HP OmniBook 7 Laptop 14-hg0xxx (DMI: "HP HP OmniBook 7 Laptop 14-hg0xxx/8F07"), dmesg shows the CS35L41 DSP firmware path referencing "HP_Consumer\CY25\Agusta\Official_release", confirming that "Agusta" is the internal codename for this platform.
Switching to ALC287_FIXUP_CS35L41_I2C_2_HP_MUTE_LEDS keeps the dual CS35L41 I2C initialization intact while chaining ALC245_FIXUP_HP_X360_MUTE_LEDS, which exposes and drives both hda::mute and hda::micmute properly on this hardware.
Please confirm whether updating the existing 103c:8f07 entry in-place is safe across any other variants sharing this SSID.
sound/hda/codecs/realtek/alc269.c +1 -1
@@ -8145,7 +8145,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = {SND_PCI_QUIRK (0x103c ,0x8ee4 ,"HP Bantie A6U" ,ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO ),SND_PCI_QUIRK (0x103c ,0x8ee5 ,"HP Bantie A6U" ,ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO ),SND_PCI_QUIRK (0x103c ,0x8ee7 ,"HP Abe A6U" ,ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO ), -SND_PCI_QUIRK (0x103c ,0x8f07 ,"HP Agusta G7KX" ,ALC287_FIXUP_CS35L41_I2C_2 ), +SND_PCI_QUIRK (0x103c ,0x8f07 ,"HP OmniBook 7 Laptop 14-hg0xxx" ,ALC287_FIXUP_CS35L41_I2C_2_HP_MUTE_LEDS ),SND_PCI_QUIRK (0x103c ,0x8f0c ,"HP ZBook X G2i 16W" ,ALC236_FIXUP_HP_GPIO_LED ),SND_PCI_QUIRK (0x103c ,0x8f0e ,"HP ZBook X G2i 16W" ,ALC236_FIXUP_HP_GPIO_LED ), SND_PCI_QUIRK(0x103c, 0x8f2d, "HP Auster 14", ALC287_FIXUP_CS35L41_I2C_2),
Signature · 1 line
2.56.1