arm64: dts: rockchip: remove bus-width from mmc nodes in rk3308.dtsi
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: remove bus-width from mmc nodes in rk3308.dtsi
The 'bus-width' property for mmc nodes is defined both in 'rk3308.dtsi' and 'rk3308-roc-cc.dts'.
In line with the other Rockchip SoCs define that in a user dts only, so remove all entries from mmc nodes in 'rk3308.dtsi'.
--- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 3 --- 1 file changed, 3 deletions(-)
arch/arm64/boot/dts/rockchip/rk3308.dtsi +0 -3
@@ -587,7 +587,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff480000 0x0 0x4000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -602,7 +601,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff490000 0x0 0x4000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <8>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -615,7 +613,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff4a0000 0x0 0x4000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
Signature · 1 line
2.11.0
Quoted 4 lines · Johan Jonker
The 'bus-width' property for mmc nodes is defined both in '
rk3308.dtsi' and 'rk3308-roc-cc.dts'.
In line with the other Rockchip SoCs define that in a user dts only, so remove all entries from mmc nodes in 'rk3308.dtsi'.
Judging by the pinctrl entries, these represent the number of pins provided by the SoC itself. Obviously boards need to override that if for some reason they don't wire up all the available data lines, but it seems backwards to have every board restate the SoC's default value.
In fact, having brought it up, for this particular case the pinctrl setting is inherently related to the bus width, so having one without the other in either place doesn't smell right.
Robin.
Quoted 34 lines
Signed-off-by Johan Jonker <[email protected]>--- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 3 --- 1 file changed, 3 deletions(-)arch/arm64/boot/dts/rockchip/rk3308.dtsi +0
-3@@ -587,7 +587,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff480000 0x0 0x4000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";@@ -602,7 +601,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff490000 0x0 0x4000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <8>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";@@ -615,7 +613,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff4a0000 0x0 0x4000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
Heiko Stübner
maintainerAm Dienstag, 14. April 2020, 12:02:46 CEST schrieb Robin Murphy:
Quoted 10 lines · Johan Jonker
Quoted 4 lines
The 'bus-width' property for mmc nodes is defined both in '
rk3308.dtsi' and 'rk3308-roc-cc.dts'.
In line with the other Rockchip SoCs define that in a user dts only, so remove all entries from mmc nodes in 'rk3308.dtsi'.Judging by the pinctrl entries, these represent the number of pins provided by the SoC itself. Obviously boards need to override that if for some reason they don't wire up all the available data lines, but it seems backwards to have every board restate the SoC's default value.
Yep, especially as most boards follow the reference layout to some extent and so far I haven't seen any board not use the full 4 pins for sdmmc for example :-)
Quoted 3 lines
In fact, having brought it up, for this particular case the pinctrl setting is inherently related to the bus width, so having one without the other in either place doesn't smell right.
So the bus width should be removed from the board file.
Quoted 35 lines
Quoted 34 lines
Signed-off-by Johan Jonker <[email protected]>--- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 3 --- 1 file changed, 3 deletions(-)arch/arm64/boot/dts/rockchip/rk3308.dtsi +0
-3@@ -587,7 +587,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff480000 0x0 0x4000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";@@ -602,7 +601,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff490000 0x0 0x4000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <8>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";@@ -615,7 +613,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff4a0000 0x0 0x4000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
Hi Robin, Heiko,
If the Rockchip DT maintainers(= Heiko) agree that the new line for the 'bus-width' properties is that it should be placed in dtsi I'll produce a version 2. Please advise what should be done with the other Rockchip SoCs. Change them too?
Johan.
Quoted 55 lines · Robin Murphy
Quoted 4 lines · Johan Jonker
The 'bus-width' property for mmc nodes is defined both in '
rk3308.dtsi' and 'rk3308-roc-cc.dts'.
In line with the other Rockchip SoCs define that in a user dts only, so remove all entries from mmc nodes in 'rk3308.dtsi'.Judging by the pinctrl entries, these represent the number of pins provided by the SoC itself. Obviously boards need to override that if for some reason they don't wire up all the available data lines, but it seems backwards to have every board restate the SoC's default value.
In fact, having brought it up, for this particular case the pinctrl setting is inherently related to the bus width, so having one without the other in either place doesn't smell right.
Robin.
Quoted 38 lines
Signed-off-by Johan Jonker <[email protected]>---
arch/arm64/boot/dts/rockchip/rk3308.dtsi| 3 ---1 file changed, 3 deletions(-)arch/arm64/boot/dts/rockchip/rk3308.dtsi +0
-1@@ -587,7 +587,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff480000 0x0 0x4000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
arch/arm64/boot/dts/rockchip/rk3308.dtsi +0
-1@@ -602,7 +601,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff490000 0x0 0x4000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <8>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
arch/arm64/boot/dts/rockchip/rk3308.dtsi +0
-1@@ -615,7 +613,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff4a0000 0x0 0x4000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
Heiko Stübner
maintainerHi Johan,
Am Dienstag, 14. April 2020, 13:45:00 CEST schrieb Johan Jonker:
Quoted 6 lines
Hi Robin, Heiko,
If the Rockchip DT maintainers(= Heiko) agree that the new line for the 'bus-width' properties is that it should be placed in dtsi I'll produce a version 2. Please advise what should be done with the other Rockchip SoCs. Change them too?
(1) as Robin pointed out bus-width and pinctrl containing the bus-pins should be in the same file, as they describe parts of the same property
(2) essentially it is ok for pinctrl-defaults to live in the dtsi, when there are no pin variants ... (like the uartX_mY pin variants), so if you enable a node and only have essentially one pin variant to enable, this should live in the soc dtsi (like essentially all boards using 4-pin sdmmc and 8-pin emmc)
(3) Fixing other devicetrees is optional, so I won't oppose it of course but it's also not something "that must be done" ;-)
Heiko
Quoted 58 lines · Robin Murphy
Quoted 55 lines · Johan Jonker
Quoted 4 lines
The 'bus-width' property for mmc nodes is defined both in '
rk3308.dtsi' and 'rk3308-roc-cc.dts'.
In line with the other Rockchip SoCs define that in a user dts only, so remove all entries from mmc nodes in 'rk3308.dtsi'.Judging by the pinctrl entries, these represent the number of pins provided by the SoC itself. Obviously boards need to override that if for some reason they don't wire up all the available data lines, but it seems backwards to have every board restate the SoC's default value.
In fact, having brought it up, for this particular case the pinctrl setting is inherently related to the bus width, so having one without the other in either place doesn't smell right.
Robin.
Quoted 38 lines
Signed-off-by Johan Jonker <[email protected]>--- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 3 --- 1 file changed, 3 deletions(-)arch/arm64/boot/dts/rockchip/rk3308.dtsi +0
-1@@ -587,7 +587,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff480000 0x0 0x4000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";arch/arm64/boot/dts/rockchip/rk3308.dtsi +0
-1@@ -602,7 +601,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff490000 0x0 0x4000>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <8>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";arch/arm64/boot/dts/rockchip/rk3308.dtsi +0
-1@@ -615,7 +613,6 @@ compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff4a0000 0x0 0x4000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - bus-width = <4>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";