Synchronize user layer access with system PM ops and error handling
v2 cover Synchronize user layer access with system PM ops and error handling
This series contains two changes and it is based on 5.11/scsi-queue
The 1st change is just a minor fix.
The 2nd change is to synchronize user layer access through UFS sysfs nodes, so that system PM ops (suspend, resume and shutdown), error handling and async probe won't be disturbed by user layer access. The protection is only added to some sysfs nodes, not all of them.
Change since v1:
- Slightly updated the 2nd change, added a dedicated inline func to check hba->shutting_down in ufshcd.h. This inline func can be updated to add more rules for sysfs passage in future.
Can Guo (2):
scsi: ufs: Fix a possible NULL pointer issue
scsi: ufs: Protect PM ops and err_handler from user access through
sysfs
drivers/scsi/ufs/ufs-sysfs.c | 104 ++++++++++++++++++++++++++++++++++++------- drivers/scsi/ufs/ufshcd.c | 49 ++++++++++++-------- drivers/scsi/ufs/ufshcd.h | 10 ++++- 3 files changed, 128 insertions(+), 35 deletions(-)
Signature · 1 line
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
PATCH v2 1/2 scsi: ufs: Fix a possible NULL pointer issue
During system resume/suspend, hba could be NULL. In this case, do not touch eh_sem.
--- drivers/scsi/ufs/ufshcd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/scsi/ufs/ufshcd.c +5 -4
@@ -8896,8 +8896,11 @@ int ufshcd_system_suspend(struct ufs_hba *hba)int ret =0 ;ktime_t start =ktime_get (); +if (!hba) +return 0 ; +down (&hba->eh_sem); -if (!hba || !hba->is_powered) +if (!hba->is_powered)return 0 ; if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) ==
@@ -8945,10 +8948,8 @@ int ufshcd_system_resume(struct ufs_hba *hba)int ret =0 ;ktime_t start =ktime_get (); -if (!hba) { -up (&hba->eh_sem); +if (!hba)return -EINVAL ; - }if (!hba->is_powered ||pm_runtime_suspended (hba->dev))/*
Signature · 1 line
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Re: [PATCH v2 1/2] scsi: ufs: Fix a possible NULL pointer issue
Quoted 29 lines · Can Guo
During system resume/suspend, hba could be NULL. In this case, do not touch
eh_sem.Fixes 88a92d6ae4fe ("scsi: ufs: Serialize eh_work with system PM events and async scan")Signed-off-by Can Guo <[email protected]>--- drivers/scsi/ufs/ufshcd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)drivers/scsi/ufs/ufshcd.c +4
-1@@ -8896,8 +8896,11 @@ int ufshcd_system_suspend(struct ufs_hba *hba)int ret =0 ;ktime_t start =ktime_get (); +if (!hba) +return 0 ; +down (&hba->eh_sem); -if (!hba || !hba->is_powered) +if (!hba->is_powered)return 0 ; if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) ==@@ -8945,10 +8948,8 @@ int ufshcd_system_resume(struct ufs_hba *hba)int ret =0 ;
drivers/scsi/ufs/ufshcd.c int ufshcd_system_resume(struct ufs_hba *hba) · line 8955
Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +1
-3ktime_t start =ktime_get (); -if (!hba) { -up (&hba->eh_sem); +if (!hba)return -EINVAL ; - }if (!hba->is_powered ||pm_runtime_suspended (hba->dev))/*
Hi Can,
How can ufshcd_system_suspend() or ufshcd_system_resume() be called with a NULL argument? In ufshcd_pci_probe() I see that pci_set_drvdata() is called before pm_runtime_allow(). ufshcd_pci_remove() calls pm_runtime_forbid().
Thanks,
Bart.
Re: [PATCH v2 1/2] scsi: ufs: Fix a possible NULL pointer issue
Quoted 43 lines · Bart Van Assche
Quoted 29 lines · Can Guo
During system resume/suspend, hba could be NULL. In this case, do not touch
eh_sem.Fixes 88a92d6ae4fe ("scsi: ufs: Serialize eh_work with system PM events and async scan")Signed-off-by Can Guo <[email protected]>--- drivers/scsi/ufs/ufshcd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)drivers/scsi/ufs/ufshcd.c +4
-1@@ -8896,8 +8896,11 @@ int ufshcd_system_suspend(struct ufs_hba *hba)int ret =0 ;ktime_t start =ktime_get (); +if (!hba) +return 0 ; +down (&hba->eh_sem); -if (!hba || !hba->is_powered) +if (!hba->is_powered)return 0 ; if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) ==@@ -8945,10 +8948,8 @@ int ufshcd_system_resume(struct ufs_hba *hba)int ret =0 ;drivers/scsi/ufs/ufshcd.c int ufshcd_system_resume(struct ufs_hba *hba) · line 8955
Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +1
-3ktime_t start =ktime_get (); -if (!hba) { -up (&hba->eh_sem); +if (!hba)return -EINVAL ; - }if (!hba->is_powered ||pm_runtime_suspended (hba->dev))/* Hi Can,
Quoted 7 lines
How can
ufshcd_system_suspend()orufshcd_system_resume()be called with a NULL argument? Inufshcd_pci_probe()I see thatpci_set_drvdata()is called beforepm_runtime_allow().ufshcd_pci_remove()callspm_runtime_forbid().Thanks,
Bart.
Hi Bart,
You are right about ufshcd_RUNTIME_suspend/resume() - platform_set_drvdata() is called before pm_runtime_enable(), so runtime suspend/resume cannot happen before pm_runtime_enable() is called. We can remove the sanity checks of !hba there, they are outdated.
But for ufshcd_SYSTEM_suspend/resume() callbacks (not runtime ones), my understanding is that system suspend/resume may happen after probe (vendor driver probe calls ufshcd_pltfrm_init()) starts but before platform_set_drvdata() is called, in this case hba is NULL.
int ufshcd_pltfrm_init(struct platform_device *pdev,
const struct ufs_hba_variant_ops *vops)
{
...
platform_set_drvdata(pdev, hba);
pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); }
Thanks,
Can Guo.
Re: [PATCH v2 1/2] scsi: ufs: Fix a possible NULL pointer issue
Quoted 50 lines · Can Guo
Quoted 49 lines · Bart Van Assche
Quoted 29 lines · Can Guo
During system resume/suspend, hba could be NULL. In this case, do not touch
eh_sem.Fixes 88a92d6ae4fe ("scsi: ufs: Serialize eh_work with system PM events and async scan")Signed-off-by Can Guo <[email protected]>--- drivers/scsi/ufs/ufshcd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)drivers/scsi/ufs/ufshcd.c +4
-1@@ -8896,8 +8896,11 @@ int ufshcd_system_suspend(struct ufs_hba *hba)int ret =0 ;ktime_t start =ktime_get (); +if (!hba) +return 0 ; +down (&hba->eh_sem); -if (!hba || !hba->is_powered) +if (!hba->is_powered)return 0 ; if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) ==@@ -8945,10 +8948,8 @@ int ufshcd_system_resume(struct ufs_hba *hba)int ret =0 ;drivers/scsi/ufs/ufshcd.c int ufshcd_system_resume(struct ufs_hba *hba) · line 8955
Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +1
-3ktime_t start =ktime_get (); -if (!hba) { -up (&hba->eh_sem); +if (!hba)return -EINVAL ; - }if (!hba->is_powered ||pm_runtime_suspended (hba->dev))/* Hi Can,
How can
ufshcd_system_suspend()orufshcd_system_resume()be called with a NULL argument? Inufshcd_pci_probe()I see thatpci_set_drvdata()is called beforepm_runtime_allow().ufshcd_pci_remove()callspm_runtime_forbid().Thanks,
Quoted 8 lines
Quoted 1 line
Bart.
Hi Bart,
You are right about ufshcd_RUNTIME_suspend/resume() -
platform_set_drvdata()is called beforepm_runtime_enable(), so runtime suspend/resume cannot happen beforepm_runtime_enable()is called. We can remove the sanity checks of !hba there, they are outdated.
Add more history here - before Stanley's change (see below), platform_set_drvdata() is called AFTER pm_runtime_enable(), which was why we needed sanity checks of !hba. But now the sanity checks are unnecessary in ufshcd_RUNTIME_suspend/resume(), so feel free to remove them.
But still, things are a bit different for ufshcd_SYSTEM_suspend/resume(), we need the sanity checks of !hba there if my understanding is correct.
commit 24e2e7a19f7e4b83d0d5189040d997bce3596473
Author: Stanley Chu <[email protected]> Date: Wed Jun 12 23:19:05 2019 +0800
scsi: ufs: Avoid runtime suspend possibly being blocked forever
Thanks,
Can Guo.
Quoted 20 lines
But for ufshcd_SYSTEM_suspend/resume() callbacks (not runtime ones), my understanding is that system suspend/resume may happen after probe (vendor driver probe calls
ufshcd_pltfrm_init()) starts but beforeplatform_set_drvdata()
is called, in this case hba is NULL.int ufshcd_pltfrm_init(struct
platform_device*pdev,
const structufs_hba_variant_ops*vops)
{
...
platform_set_drvdata(pdev, hba);pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); }Thanks,
Can Guo.
Re: [PATCH v2 1/2] scsi: ufs: Fix a possible NULL pointer issue
Quoted 73 lines · Can Guo
Quoted 51 lines · Can Guo
Quoted 50 lines · Bart Van Assche
Quoted 30 lines · Can Guo
During system resume/suspend, hba could be NULL. In this case, do not touch
eh_sem.Fixes 88a92d6ae4fe ("scsi: ufs: Serialize eh_work with system PM eventsand async scan")
Signed-off-by Can Guo <[email protected]>---
drivers/scsi/ufs/ufshcd.c | 9 +++++----1 file changed, 5 insertions(+), 4 deletions(-)drivers/scsi/ufs/ufshcd.c +4
-1@@ -8896,8 +8896,11 @@ int ufshcd_system_suspend(struct ufs_hba *hba) int ret = 0; ktime_t start = ktime_get(); + if (!hba) + return 0; + down(&hba->eh_sem); - if (!hba || !hba->is_powered) + if (!hba->is_powered) return 0;if ((
ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl)==drivers/scsi/ufs/ufshcd.c +0
-0@@ -8945,10 +8948,8 @@ int ufshcd_system_resume(struct ufs_hba *hba) int ret = 0;drivers/scsi/ufs/ufshcd.c int ufshcd_system_resume(struct ufs_hba *hba) · line 8955
Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +1
-3ktime_t start = ktime_get(); - if (!hba) { - up(&hba->eh_sem); + if (!hba) return -EINVAL; - } if (!hba->is_powered || pm_runtime_suspended(hba->dev)) /*Hi Can,
How can
ufshcd_system_suspend()orufshcd_system_resume()be called with a NULL argument? Inufshcd_pci_probe()I see thatpci_set_drvdata()is called beforepm_runtime_allow().ufshcd_pci_remove()callspm_runtime_forbid().Thanks,
Quoted 8 lines
Quoted 1 line
Bart.
Hi Bart,
You are right about ufshcd_RUNTIME_suspend/resume() -
platform_set_drvdata()is called beforepm_runtime_enable(), so runtime suspend/resume cannot happen beforepm_runtime_enable()is called. We can remove the sanity checks of !hba there, they are outdated.Add more history here - before Stanley's change (see below),
platform_set_drvdata()
is called AFTERpm_runtime_enable(), which was why we needed sanity checks of !hba.
But now the sanity checks are unnecessary in ufshcd_RUNTIME_suspend/resume(), so
feel free to remove them.But still, things are a bit different for ufshcd_SYSTEM_suspend/resume(), we need
the sanity checks of !hba there if my understanding is correct.
Quoted 25 lines
commit
24e2e7a19f7e4b83d0d5189040d997bce3596473
Author: Stanley Chu <[email protected]>
Date: Wed Jun 12 23:19:05 2019 +0800scsi: ufs: Avoid runtime suspend possibly being blocked forever
Thanks,
Can Guo.Quoted 16 lines
But for ufshcd_SYSTEM_suspend/resume() callbacks (not runtime ones), my understanding is that system suspend/resume may happen after probe (vendor driver probe calls
ufshcd_pltfrm_init()) starts but beforeplatform_set_drvdata()
is called, in this case hba is NULL.int
ufshcd_pltfrm_init(struct platform_device *pdev, const struct ufs_hba_variant_ops *vops){
...
platform_set_drvdata(pdev, hba);pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
}
Hi Can
I expect probe and system suspend are synchronized e.g. by device_lock(), so hba would not be NULL. Is there any example of it being NULL in system suspend?
Regards
Adrian
Re: [PATCH v2 1/2] scsi: ufs: Fix a possible NULL pointer issue
Quoted 102 lines · Adrian Hunter
Quoted 75 lines · Can Guo
Quoted 53 lines · Can Guo
Quoted 52 lines · Bart Van Assche
Quoted 41 lines · Can Guo
During system resume/suspend, hba could be NULL. In this case, do not touch
eh_sem.Fixes 88a92d6ae4fe ("scsi: ufs: Serialize eh_work with system PM eventsand async scan")
Signed-off-by Can Guo <[email protected]>---
drivers/scsi/ufs/ufshcd.c | 9 +++++----1 file changed, 5 insertions(+), 4 deletions(-)drivers/scsi/ufs/ufshcd.c +4
-1@@ -8896,8 +8896,11 @@ int ufshcd_system_suspend(struct ufs_hba *hba) int ret = 0; ktime_t start = ktime_get(); + if (!hba) + return 0; + down(&hba->eh_sem); - if (!hba || !hba->is_powered) + if (!hba->is_powered) return 0;if ((
ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl)==drivers/scsi/ufs/ufshcd.c +1
-3@@ -8945,10 +8948,8 @@ int ufshcd_system_resume(struct ufs_hba *hba) int ret = 0; ktime_t start = ktime_get(); - if (!hba) { - up(&hba->eh_sem); + if (!hba) return -EINVAL; - } if (!hba->is_powered || pm_runtime_suspended(hba->dev))Quoted 1 line
/*
Hi Can,
How can
ufshcd_system_suspend()orufshcd_system_resume()be called with a NULL argument? Inufshcd_pci_probe()I see thatpci_set_drvdata()is called beforepm_runtime_allow().ufshcd_pci_remove()callspm_runtime_forbid().Thanks,
Quoted 8 lines
Quoted 1 line
Bart.
Hi Bart,
You are right about ufshcd_RUNTIME_suspend/resume() -
platform_set_drvdata()is called beforepm_runtime_enable(), so runtime suspend/resume cannot happen beforepm_runtime_enable()is called. We can remove the sanity checks of !hba there, they are outdated.Add more history here - before Stanley's change (see below),
platform_set_drvdata()
is called AFTERpm_runtime_enable(), which was why we needed sanity checks of !hba.
But now the sanity checks are unnecessary in ufshcd_RUNTIME_suspend/resume(), so
feel free to remove them.But still, things are a bit different for ufshcd_SYSTEM_suspend/resume(), we need
the sanity checks of !hba there if my understanding is correct.Quoted 25 lines
commit
24e2e7a19f7e4b83d0d5189040d997bce3596473
Author: Stanley Chu <[email protected]>
Date: Wed Jun 12 23:19:05 2019 +0800scsi: ufs: Avoid runtime suspend possibly being blocked forever
Thanks,
Can Guo.Quoted 16 lines
But for ufshcd_SYSTEM_suspend/resume() callbacks (not runtime ones), my understanding is that system suspend/resume may happen after probe (vendor driver probe calls
ufshcd_pltfrm_init()) starts but beforeplatform_set_drvdata()
is called, in this case hba is NULL.int
ufshcd_pltfrm_init(struct platform_device *pdev, const struct ufs_hba_variant_ops *vops){
...
platform_set_drvdata(pdev, hba);pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
}
Quoted 7 lines
Hi Can
I expect probe and system suspend are synchronized e.g. by
device_lock(), so hba would not be NULL. Is there any example of it being NULL in system suspend?Regards
Adrian
Hi Adrian,
Thanks for the remind - I didn't notice they are protected by device_lock(). You are right, hba cannot be NULL in current code... Maybe if (!hba) was there just for a sanity check. I will make a change to remove these checks.
Thanks,
Can Guo.
PATCH v2 2/2 scsi: ufs: Protect PM ops and err_handler from user access through sysfs
In reply to Can GuoUser layer may access sysfs nodes when system PM ops or error handling is running, which can cause various problems. Rename eh_sem to host_sem and use it to protect PM ops and error handling from user layer intervene.
--- drivers/scsi/ufs/ufs-sysfs.c | 104 ++++++++++++++++++++++++++++++++++++------- drivers/scsi/ufs/ufshcd.c | 40 ++++++++++------- drivers/scsi/ufs/ufshcd.h | 10 ++++- 3 files changed, 123 insertions(+), 31 deletions(-)
drivers/scsi/ufs/ufs-sysfs.c +89 -15
@@ -154,18 +154,29 @@ static ssize_t auto_hibern8_show(struct device *dev, struct device_attribute *attr, char *buf) { u32 ahit; +int ret;struct ufs_hba *hba =dev_get_drvdata (dev);if (!ufshcd_is_auto_hibern8_supported (hba))return -EOPNOTSUPP ; +down (&hba->host_sem); +if (!ufshcd_is_sysfs_allowed (hba)) { + ret = -EBUSY ; + goto out; + } +pm_runtime_get_sync (hba->dev);ufshcd_hold (hba, false); ahit =ufshcd_readl (hba,REG_AUTO_HIBERNATE_IDLE_TIMER );ufshcd_release (hba);pm_runtime_put_sync (hba->dev); -return scnprintf (buf,PAGE_SIZE ,"%d\n" ,ufshcd_ahit_to_us (ahit)); + ret =scnprintf (buf,PAGE_SIZE ,"%d\n" ,ufshcd_ahit_to_us (ahit)); + +out: +up (&hba->host_sem); +return ret; } static ssize_t auto_hibern8_store(struct device *dev,
@@ -174,6 +185,7 @@ static ssize_t auto_hibern8_store(struct device *dev, {struct ufs_hba *hba =dev_get_drvdata (dev);unsigned int timer; +int ret =0 ;if (!ufshcd_is_auto_hibern8_supported (hba))return -EOPNOTSUPP ;
@@ -184,9 +196,17 @@ static ssize_t auto_hibern8_store(struct device *dev,if (timer >UFSHCI_AHIBERN8_MAX )return -EINVAL ; +down (&hba->host_sem); +if (!ufshcd_is_sysfs_allowed (hba)) { + ret = -EBUSY ; + goto out; + } +ufshcd_auto_hibern8_update (hba,ufshcd_us_to_ahit (timer)); -return count; +out: +up (&hba->host_sem); +return ret ? ret : count; }static DEVICE_ATTR_RW (rpm_lvl);
@@ -225,12 +245,21 @@ static ssize_t ufs_sysfs_read_desc_param(struct ufs_hba *hba,if (param_size >8 )return -EINVAL ; +down (&hba->host_sem); +if (!ufshcd_is_sysfs_allowed (hba)) { + ret = -EBUSY ; + goto out; + } +pm_runtime_get_sync (hba->dev); ret =ufshcd_read_desc_param (hba, desc_id, desc_index, param_offset, desc_buf, param_size);pm_runtime_put_sync (hba->dev); -if (ret) -return -EINVAL ; +if (ret) { + ret = -EINVAL ; + goto out; + } +switch (param_size) {case 1 : ret =sprintf (sysfs_buf,"0x%02X\n" , *desc_buf);
@@ -249,6 +278,8 @@ static ssize_t ufs_sysfs_read_desc_param(struct ufs_hba *hba,break ; } +out: +up (&hba->host_sem);return ret; }
@@ -591,9 +622,16 @@ static ssize_t _name##_show(struct device *dev, \int desc_len =QUERY_DESC_MAX_SIZE ; \u8 *desc_buf; \ \ +down (&hba->host_sem); \ +if (!ufshcd_is_sysfs_allowed (hba)) { \ +up (&hba->host_sem); \ +return -EBUSY ; \ + } \ desc_buf =kzalloc (QUERY_DESC_MAX_SIZE ,GFP_ATOMIC ); \ -if (!desc_buf) \ -return -ENOMEM ; \ +if (!desc_buf) { \ +up (&hba->host_sem); \ +return -ENOMEM ; \ + } \pm_runtime_get_sync (hba->dev); \ ret = ufshcd_query_descriptor_retry(hba, \ UPIU_QUERY_OPCODE_READ_DESC, QUERY_DESC_IDN_DEVICE, \
@@ -613,6 +651,7 @@ static ssize_t _name##_show(struct device *dev, \ out: \pm_runtime_put_sync (hba->dev); \kfree (desc_buf); \ +up (&hba->host_sem); \return ret; \ } \static DEVICE_ATTR_RO (_name)
@@ -651,15 +690,26 @@ static ssize_t _name##_show(struct device *dev, \u8 index =0 ; \int ret; \struct ufs_hba *hba =dev_get_drvdata (dev); \ + \ +down (&hba->host_sem); \ +if (!ufshcd_is_sysfs_allowed (hba)) { \ +up (&hba->host_sem); \ +return -EBUSY ; \ + } \ if (ufshcd_is_wb_flags(QUERY_FLAG_IDN##_uname)) \ index =ufshcd_wb_get_query_index (hba); \pm_runtime_get_sync (hba->dev); \ ret =ufshcd_query_flag (hba,UPIU_QUERY_OPCODE_READ_FLAG , \ QUERY_FLAG_IDN##_uname, index, &flag); \pm_runtime_put_sync (hba->dev); \ -if (ret) \ -return -EINVAL ; \ -return sprintf (buf,"%s\n" , flag ?"true" :"false" ); \ +if (ret) { \ + ret = -EINVAL ; \ + goto out; \ + } \ + ret =sprintf (buf,"%s\n" , flag ?"true" :"false" ); \ +out: \ +up (&hba->host_sem); \ +return ret; \ } \static DEVICE_ATTR_RO (_name)
@@ -709,15 +759,26 @@ static ssize_t _name##_show(struct device *dev, \u32 value; \int ret; \u8 index =0 ; \ + \ +down (&hba->host_sem); \ +if (!ufshcd_is_sysfs_allowed (hba)) { \ +up (&hba->host_sem); \ +return -EBUSY ; \ + } \ if (ufshcd_is_wb_attrs(QUERY_ATTR_IDN##_uname)) \ index =ufshcd_wb_get_query_index (hba); \pm_runtime_get_sync (hba->dev); \ ret =ufshcd_query_attr (hba,UPIU_QUERY_OPCODE_READ_ATTR , \ QUERY_ATTR_IDN##_uname, index, 0, &value); \pm_runtime_put_sync (hba->dev); \ -if (ret) \ -return -EINVAL ; \ -return sprintf (buf,"0x%08X\n" , value); \ +if (ret) { \ + ret = -EINVAL ; \ + goto out; \ + } \ + ret =sprintf (buf,"0x%08X\n" , value); \ +out: \ +up (&hba->host_sem); \ +return ret; \ } \static DEVICE_ATTR_RO (_name)
@@ -850,13 +911,26 @@ static ssize_t dyn_cap_needed_attribute_show(struct device *dev,u8 lun =ufshcd_scsi_to_upiu_lun (sdev->lun);int ret; +down (&hba->host_sem); +if (!ufshcd_is_sysfs_allowed (hba)) { + ret = -EBUSY ; + goto out; + } +pm_runtime_get_sync (hba->dev); ret =ufshcd_query_attr (hba,UPIU_QUERY_OPCODE_READ_ATTR ,QUERY_ATTR_IDN_DYN_CAP_NEEDED , lun,0 , &value);pm_runtime_put_sync (hba->dev); -if (ret) -return -EINVAL ; -return sprintf (buf,"0x%08X\n" , value); +if (ret) { + ret = -EINVAL ; + goto out; + } + + ret =sprintf (buf,"0x%08X\n" , value); + +out: +up (&hba->host_sem); +return ret; }static DEVICE_ATTR_RO (dyn_cap_needed_attribute);
drivers/scsi/ufs/ufshcd.c +25 -15
@@ -1522,11 +1522,17 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev, {struct ufs_hba *hba =dev_get_drvdata (dev);u32 value; -int err; +int err =0 ;if (kstrtou32 (buf,0 , &value))return -EINVAL ; +down (&hba->host_sem); +if (!ufshcd_is_sysfs_allowed (hba)) { + err = -EBUSY ; + goto out; + } + value = !!value;if (value == hba->clk_scaling.is_allowed) goto out;
@@ -1552,7 +1558,8 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,ufshcd_release (hba);pm_runtime_put_sync (hba->dev); out: -return count; +up (&hba->host_sem); +return err ? err : count; }static void ufshcd_clkscaling_init_sysfs (struct ufs_hba *hba)
@@ -5720,9 +5727,10 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)static inline bool ufshcd_err_handling_should_stop (struct ufs_hba *hba) { -return (!hba->is_powered || hba->ufshcd_state ==UFSHCD_STATE_ERROR || +return (!hba->is_powered || hba->shutting_down || + hba->ufshcd_state ==UFSHCD_STATE_ERROR || (!(hba->saved_err || hba->saved_uic_err || hba->force_reset || -ufshcd_is_link_broken (hba)))); +ufshcd_is_link_broken (hba)))); }#ifdef CONFIG_PM
@@ -5792,13 +5800,13 @@ static void ufshcd_err_handler(struct work_struct *work) hba = container_of(work, struct ufs_hba, eh_work); -down (&hba->eh_sem); +down (&hba->host_sem);spin_lock_irqsave (hba->host->host_lock, flags);if (ufshcd_err_handling_should_stop (hba)) {if (hba->ufshcd_state !=UFSHCD_STATE_ERROR ) hba->ufshcd_state =UFSHCD_STATE_OPERATIONAL ;spin_unlock_irqrestore (hba->host->host_lock, flags); -up (&hba->eh_sem); +up (&hba->host_sem);return ; }ufshcd_set_eh_in_progress (hba);
@@ -5967,7 +5975,7 @@ static void ufshcd_err_handler(struct work_struct *work)spin_unlock_irqrestore (hba->host->host_lock, flags);ufshcd_scsi_unblock_requests (hba);ufshcd_err_handling_unprepare (hba); -up (&hba->eh_sem); +up (&hba->host_sem); }/**
@@ -7869,10 +7877,10 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)struct ufs_hba *hba = (struct ufs_hba *)data;int ret; -down (&hba->eh_sem); +down (&hba->host_sem);/* Initialize hba, detect and initialize UFS device */ ret =ufshcd_probe_hba (hba, true); -up (&hba->eh_sem); +up (&hba->host_sem);if (ret) goto out;
@@ -8899,7 +8907,7 @@ int ufshcd_system_suspend(struct ufs_hba *hba)if (!hba)return 0 ; -down (&hba->eh_sem); +down (&hba->host_sem);if (!hba->is_powered)return 0 ;
@@ -8931,7 +8939,7 @@ int ufshcd_system_suspend(struct ufs_hba *hba)if (!ret) hba->is_sys_suspended = true;else -up (&hba->eh_sem); +up (&hba->host_sem);return ret; }EXPORT_SYMBOL (ufshcd_system_suspend);
@@ -8965,7 +8973,7 @@ int ufshcd_system_resume(struct ufs_hba *hba) hba->curr_dev_pwr_mode, hba->uic_link_state);if (!ret) hba->is_sys_suspended = false; -up (&hba->eh_sem); +up (&hba->host_sem);return ret; }EXPORT_SYMBOL (ufshcd_system_resume);
@@ -9057,7 +9065,10 @@ int ufshcd_shutdown(struct ufs_hba *hba) {int ret =0 ; -down (&hba->eh_sem); +down (&hba->host_sem); + hba->shutting_down = true; +up (&hba->host_sem); +if (!hba->is_powered) goto out;
@@ -9075,7 +9086,6 @@ int ufshcd_shutdown(struct ufs_hba *hba)if (ret)dev_err (hba->dev,"%s failed, err %d\n" , __func__, ret); hba->is_powered = false; -up (&hba->eh_sem);/* allow force shutdown even in case of errors */ return 0 ; }
@@ -9270,7 +9280,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)INIT_WORK (&hba->eh_work, ufshcd_err_handler);INIT_WORK (&hba->eeh_work, ufshcd_exception_event_handler); -sema_init (&hba->eh_sem,1 ); +sema_init (&hba->host_sem,1 );/* Initialize UIC command mutex */ mutex_init (&hba->uic_cmd_mutex);
drivers/scsi/ufs/ufshcd.h +9 -1
@@ -655,6 +655,8 @@ struct ufs_hba_variant_params {* @intr_mask: Interrupt Mask Bits * @ee_ctrl_mask: Exception event control mask * @is_powered: flag to check if HBA is powered +* @shutting_down: flag to check if shutdown has been invoked +* @host_sem: semaphore used to serialize concurrent contexts * @eh_wq: Workqueue that eh_work works on * @eh_work: Worker to handle UFS errors that require s/w attention * @eeh_work: Worker to handle exception events
@@ -751,7 +753,8 @@ struct ufs_hba {u32 intr_mask;u16 ee_ctrl_mask;bool is_powered; -struct semaphore eh_sem; +bool shutting_down; +struct semaphore host_sem;/* Work Queues */ struct workqueue_struct *eh_wq;
@@ -875,6 +878,11 @@ static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)return hba->caps &UFSHCD_CAP_WB_EN ; } +static inline bool ufshcd_is_sysfs_allowed (struct ufs_hba *hba) +{ +return !hba->shutting_down; +} +#define ufshcd_writel (hba, val, reg) \ writel((val), (hba)->mmio_base + (reg))#define ufshcd_readl (hba, reg) \
Signature · 1 line
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.