LXT971 Ethernet problem
Hi,
I am currently working on AT91SAM9260 based board. In this board we
are using LXT971A as PHY. We are using u-boot version 1.1.5. We have connected one Ethernet cross-over cable between the board and my PC. After rebooting we are observing the following
1) In U-boot, auto negotiation is happening with the PC. So I tried to ping the PC from U-boot.
2) While pinging from the board, the request is not coming to the Computer(We checked up with Ethernet sniffers like Ethereal).
3) In the board after ping request it will wait for the reply from the other side, it is receiving packets from my Computer (broad cast messages from the PC). So our conclusion is that, the Ethernet packets from the board is not reaching up to the Computer but packets from the Computer is receiving there inside the board.
So is there any thing to do with the LXT registers or LXT Ethernet driver ? . So I request you to give us a work around to solve this issue.
I have uploaded the driver files for LXT971A using in U-boot.
http://www.nabble.com/file/p20792430/lxt971.c lxt971.c
http://www.nabble.com/file/p20792430/lxt971.h lxt971.h
Signature · 6 lines
With Regards Tomy Devasia -- View this message in context: http://www.nabble.com/LXT971--Ethernet-problem-tp20792430p20792430.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Dear Tomy,
Quoted 5 lines · In message <[email protected]> you wrote:
I am currently working on AT91SAM9260 based board. In this board we
are using LXT971A as PHY. We are using u-boot version 1.1.5. We have connected one Ethernet cross-over cable between the board and my PC. After rebooting we are observing the following
...
Quoted 2 lines
So is there any thing to do with the LXT registers or LXT Ethernet driver ? . So I request you to give us a work around to solve this issue.
Well, U-Boot 1.1.5 is *very* old.
I strongly recommend to update to recent code (U-Boot-2008.10 or even better top of tree from the git repository), and then try again.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It is clear that the individual who persecutes a man, his brother, because he is not of the same opinion, is a monster. - Voltaire
A message that is not in the archive (sent off-list or not yet received): [email protected]
Dear tomy,
Quoted 4 lines · In message <[email protected]> you wrote:
But I need u-boot source which supports
AT91SAM9260 board. I dont know whether the latest one is having the support for the same.
Please don't top post/full quote.
Please read http://www.netmeister.org/news/learn2quote.html
Quoted 2 lines · You
Quoted 2 lines
Quoted 2 lines
I am currently working on AT91SAM9260 based board. In this board we
are using LXT971A as PHY. We are using u-boot version 1.1.5. We have
Your question is a bit affronting as it imposes that I replied without knowing these things.
Mainline U-Boot does include support for the at91sam9260ek board.
If you happen to be using an out of tree port you should bury all hope for help from this list - how should we be able to comment on code we don't know, especially if it's more than 2 years old?
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "A little knowledge is a dangerous thing." - Doug Gwyn