Skip to contentSkip to conversation

ipmi_watchdog can not reset the kernel panic machine

DISCUSSION [email protected] 3 participants 3 messages Nov 24, 2007 – Nov 26, 2007

lore
Share & tools
lore
#0 lore raw

Build kernel-2.6.24-rc3. pmi_watchdog can not reset the kernel panic machine. The watchdog can never to record panic information to IPMI SEL.

1. I disable auto reset when kernel panic by echo "0" > /proc/sys/kernel/panic

2. modprobe ipmi_watchdog timeout=120 action=reset

3. Load a driver, the driver will call panic() when ioctl to call into the driver.

4. By ioctl call into the driver, panic the system.

in wdog_panic_handler, I printk "ipmi_watchdog_state=WDOG_TIMEOUT_NONE" so, the watchdog can never to record panic information to IPMI SEL.

static int wdog_panic_handler(struct notifier_block *this,
unsigned long event,
void *unused)

{
	static int panic_event_handled = 0;

	/* On a panic, if we have a panic timeout, make sure to extend
	   the watchdog timer to a reasonable value to complete the
	   panic, if the watchdog timer is running.  Plus the
	   pretimeout is meaningless at panic time. */
	if (watchdog_user && !panic_event_handled &&
	    ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
		/* Make sure we do this only once. */
		panic_event_handled = 1;

		timeout = 255;
		pretimeout = 0;
		panic_halt_ipmi_set_timeout();
	}

	return NOTIFY_OK;
}
#1 lore raw

(cc's added)

Quoted 39 lines · On Fri, 23 Nov 2007 20:28:41 -0800 (PST) [email protected] wrote:

Build kernel-2.6.24-rc3. pmi_watchdog can not reset the kernel panic machine. The watchdog can never to record panic information to IPMI SEL.

1. I disable auto reset when kernel panic by echo "0" > /proc/sys/kernel/panic

2. modprobe ipmi_watchdog timeout=120 action=reset

3. Load a driver, the driver will call panic() when ioctl to call into the driver.

4. By ioctl call into the driver, panic the system.

in wdog_panic_handler, I printk "ipmi_watchdog_state=WDOG_TIMEOUT_NONE" so, the watchdog can never to record panic information to IPMI SEL.

static int wdog_panic_handler(struct notifier_block *this,
unsigned long event,
void *unused)

{
	static int panic_event_handled = 0;

	/* On a panic, if we have a panic timeout, make sure to extend
	   the watchdog timer to a reasonable value to complete the
	   panic, if the watchdog timer is running.  Plus the
	   pretimeout is meaningless at panic time. */
	if (watchdog_user && !panic_event_handled &&
	    ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
		/* Make sure we do this only once. */
		panic_event_handled = 1;

		timeout = 255;
		pretimeout = 0;
		panic_halt_ipmi_set_timeout();
	}

	return NOTIFY_OK;
}
#2 lore raw

The watchdog is "off" by default, meaning that you have to have something actually start resetting the watchdog before it will start running. That's why you are seeing this behavior.

There is a start_now option that will start the watchdog when it is loaded, but then it will reset the system unless something resets the watchdog periodically, and you have a limited time to start this operation.

On a panic, the IPMI driver attempts to preserve the state of the watchdog and (if running) increase the timeout time to allow a kdump or something like that to occur. That's the purpose of the code you reference. It is not to start a reset operation on any panic. It used to start a reset on every panic, but that cause problems for many users.

-corey

Quoted 45 lines · Andrew Morton

(cc's added)

Quoted 40 lines · On Fri, 23 Nov 2007 20:28:41 -0800 (PST) [email protected] wrote:

Build kernel-2.6.24-rc3. pmi_watchdog can not reset the kernel panic machine. The watchdog can never to record panic information to IPMI SEL.

1. I disable auto reset when kernel panic by echo "0" > /proc/sys/kernel/panic

2. modprobe ipmi_watchdog timeout=120 action=reset

3. Load a driver, the driver will call panic() when ioctl to call into the driver.

4. By ioctl call into the driver, panic the system.

in wdog_panic_handler, I printk "ipmi_watchdog_state=WDOG_TIMEOUT_NONE" so, the watchdog can never to record panic information to IPMI SEL.

static int wdog_panic_handler(struct notifier_block *this,
unsigned long event,
void *unused)

{
	static int panic_event_handled = 0;

	/* On a panic, if we have a panic timeout, make sure to extend
	   the watchdog timer to a reasonable value to complete the
	   panic, if the watchdog timer is running.  Plus the
	   pretimeout is meaningless at panic time. */
	if (watchdog_user && !panic_event_handled &&
	    ipmi_watchdog_state != WDOG_TIMEOUT_NONE) {
		/* Make sure we do this only once. */
		panic_event_handled = 1;

		timeout = 255;
		pretimeout = 0;
		panic_halt_ipmi_set_timeout();
	}

	return NOTIFY_OK;
}