two linux 2.6 kernels on two ppc405 (xupv2p) ?
Hi all,
I want to implement a multiprocessor system managed by a linux kernel on the xupv2p.
I knwo that there is no cache coherency between the two ppc405 cores. Consequently,
SMP linux can not be used.
So the only solution is to install two linux kernels, each on a ppc processor,
and to make them communicate with shared memory.
My questions are:
does someone succeed in doing this?
Is it possible to do this ?
thanks
Signature · 2 lines
View this message in context: http://www.nabble.com/two-linux-2.6-kernels-on-two-ppc405-%28xupv2p%29---tp20978466p20978466.html Sent from the linuxppc-embedded mailing list archive at Nabble.com.
Quoted 13 lines · On Fri, 12 Dec 2008 08:13:26 -0800 (PST) "sarah.ddff" <[email protected]>…
Hi all,
I want to implement a multiprocessor system managed by a linux kernel on the xupv2p.
I knwo that there is no cache coherency between the two ppc405 cores. Consequently,
SMP linux can not be used.
So the only solution is to install two linux kernels, each on a ppc processor,
and to make them communicate with shared memory.
My questions are:
does someone succeed in doing this?
Is it possible to do this ?
AMCC has created a dual-460GT board called Arches. I have no idea how it actually works because it faces the same issues a dual-405 board would, but apparently someone must use it somewhere.
Basic Arches support is in the kernel, but it's only for a single processor from what I can see.
josh